arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2401.13755physics.opticsphysics.app-ph
收藏

全息体积增材制造

Holographic Volumetric Additive Manufacturing

Maria I. Álvarez-Castaño, Andreas Gejl Madsen, Jorge Madrid-Wolff, Antoine Boniface, Jesper Glückstad, Christophe Moser

AI总结:

本文提出全息相位调制的体积增材制造方法,利用CGH、DMD、Lee全息图、分块全息与PSF整形实现高效率、衍射极限级分辨率打印,并在一分钟内制成164 μm分辨率的毫米级物体。

摘要:

3D打印已经在许多领域革新了体积部件和结构的制造。人们已经开发了不同的技术,包括基于液态树脂光聚合的光诱导技术。特别地,最近提出的一种名为断层扫描体积增材制造(Tomographic Volumetric AM,VAM)的方法,可在数十秒内制造介观尺度物体,且无需支撑结构。该方法通过从不同角度向树脂中投影数千幅由反向断层扫描算法计算得到的振幅图案,使树脂达到聚合阈值,从而生成所需的三维形状。迄今为止,文献中仅报道了对这些图案进行振幅调制。在此,我们展示了全息相位调制为VAM打印解锁了新能力。具体而言,与振幅编码相比,有效光投影效率至少提升了10倍;分辨率可达到光的衍射极限;并且相位编码能够控制散射介质中的弹道光子,这有可能增加可在不透明、非吸收性树脂中打印的三维物体体积。该方法利用计算机生成全息图(CGH),通过光在光敏树脂容器内的传播,将编码在二维调制器上的相位转换为所需的强度投影。我们通过仿真和实验展示了全息相位编码的潜力;在实验中,我们构建了一台体积打印机,在傅里叶构型下采用数字微镜器件(DMD)作为二维相位调制器。具体而言,我们使用Lee全息图将相位编码到二元DMD上。将分块全息图与点扩散函数(PSF)整形相结合,可减轻通常与计算机生成全息图相关的散斑噪声,并加速其计算。我们利用这些全息投影在不到一分钟内制造了毫米级三维物体,分辨率低至164 μm。

英文摘要:

3D printing has revolutionized the manufacturing of volumetric components and structures in many areas. Different technologies have been developed including light-induced techniques based on the photopolymerization of liquid resins. In particular, a recently introduced method, so-called Tomographic Volumetric AM (VAM), allows the fabrication of mesoscale objects within tens of seconds without the need for support structures. This method works by projecting thousands of amplitude patterns, computed via a reverse tomography algorithm, into a resin from different angles to produce the desired three-dimensional shape when the resin reaches the polymerization threshold. To date, only amplitude modulation of the patterns has been reported. Here, we show that holographic phase modulation unlocks new capabilities for VAM printing. Specifically, the effective light projection efficiency is improved by at least a factor of 10 over amplitude coding; the resolution can reach the light diffraction limit; and phase encoding allows to control ballistic photons in scattering media, which potentially increases the volume of 3D objects that can be printed in opaque and non-absorbing resins. The approach uses CGH to convert phase, encoded on a 2D modulator to the desired intensity projections by light propagation in a photosensitive resin container. We demonstrate the potential of holographic phase coding using simulations and experiments, the latter by implementing a volumetric printer using a DMD, as the 2D phase modulator in a Fourier configuration. Specifically, we use Lee holograms to encode phase onto a binary DMD. Combining tiled holograms with PSF shaping mitigates the speckle noise typically associated with computer-generated holograms and speed-up their computation. We use these holographic projections to fabricate millimetric 3D objects in less than a minute with a resolution down to 164 um.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑