卷对卷断层扫描体积增材制造
Roll-to-roll tomographic volumetric additive manufacturing
AI总结:
针对微尺度断层扫描体积增材制造构建体积受限、仅能批量生产的问题,提出卷对卷TVAM技术,搭配聚焦复用光学系统、迭代优化正弦图工艺与热可逆有机凝胶光刻胶,实现了长60cm以上、最小特征200μm的微结构连续制备。
摘要:
增材制造(AM)彻底革新了具有精确可控光学、流体、力学和过滤特性的器件的制备工艺,相比传统制造方法提供了更高的设计自由度。断层扫描体积增材制造(TVAM,tomographic volumetric additive manufacturing)相较于其他增材制造方法具备诸多优势:无分层的光滑表面、无需支撑且无剪切力的打印过程、材料通用性以及生产速度,这些优势可延伸至微尺度,在打印的微流控器件和微光学元件中已得到体现。然而,随着图案化尺度减小,光学投影系统的景深会以约图案化尺度平方的速度更快地收缩,因此当系统数值孔径增大时,构建体积会大幅缩减。此外,目前微尺度断层扫描体积增材制造仅限于批量生产,即曝光阶段完成后必须更换光刻胶容器。在本研究中,我们提出了卷对卷(R2R,roll-to-roll)TVAM技术,通过将前驱体材料“展开”成薄膜来解决上述局限,可连续生产理论上长度不受限的微结构。我们详细阐述了一种聚焦复用投影光学系统的设计,该系统能与数字微镜器件的刷新周期同步,沿轴向扫描投影焦平面。我们介绍了利用该可调焦光学系统,对正弦图进行迭代优化和分割以制备长程非周期性微结构的工艺。此外,我们配制了一种热可逆有机凝胶光刻胶,可沉积在基底上形成数毫米厚的薄膜。最后,我们利用该R2R TVAM系统,成功打印出长度超过60厘米、最小特征尺寸为200微米的复杂晶格结构。
英文摘要:
Additive manufacturing (AM) has revolutionized the fabrication of devices with precisely controlled optical, fluidic, mechanical, and filtering properties, offering greater design freedom than conventional manufacturing methods. Tomographic volumetric additive manufacturing (TVAM) has many advantages compared to other AM methods including smooth layer-less surfaces, support-free and shear force-free printing, material versatility, and speed of production which are translatable to the microscale and evident in printed microfluidic devices and micro-optical components. However, as the patterning scale is reduced, the depth of field of the optical projection system shrinks much more rapidly and does so roughly with the square of the patterning scale. Consequently, the build volume is substantially reduced as the numerical aperture of the system is increased. Additionally, microscale tomographic VAM is currently limited to batch production, i.e., the photoresist container must be exchanged after the exposure phase is completed. In this work, we introduce roll-to-roll (R2R) TVAM in which these limitations are addressed by "unwrapping" the precursor material into a film enabling continuous production of microstructures with theoretically unlimited length. We elaborate the design of a focus-multiplexed projection optical system that can scan the projection focal plane axially in sync with the refresh cycle of a digital micromirror device. We describe the process of iteratively optimizing and segmenting sinograms to produce long aperiodic microstructures with the focus-tunable optical system. Furthermore, we formulate a thermally reversible organogel photoresist which is deposited onto the substrate in films several millimeters in thickness. Finally, we demonstrate printing of complex lattice structures with length more than 60 cm and minimum feature size of 200 um with the R2R TVAM system.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。