Atom probe tomography (APT) is a 3D analysis technique that offers unique chemical accuracy and sensitivity with sub-nanometer spatial resolution. Recently, there is an increasing interest in the application of APT to complex oxides materials, giving new insight into the relation between local variations in chemical composition and emergent physical properties. However, in contrast to the field of metallurgy, where APT is routinely applied to study materials at the atomic level, complex oxides and their specific field evaporation mechanisms are much less explored. Here, we perform APT measurements on the hexagonal manganite ErMnO3 and systematically study the effect of different experimental parameters on the measured composition and atomic structure. We demonstrate that both the mass resolving power (MRP) and compositional accuracy can be improved by increasing the charge-state ratio (CSR) working at low laser energy (< 5 pJ). Furthermore, we observe a substantial preferential retention of Er atoms, which is suppressed at higher CSRs. We explain our findings based on fundamental field evaporation concepts, expanding the knowledge about the impact of key experimental parameters and the field evaporation process in complex oxides in general.
Near-Atomic-Scale Compositional Complexity in a 2D Transition Metal Oxide
Max Planck Institute for Sustainable Materials(马克斯·普朗克可持续材料研究所);Tel Aviv University(特拉维夫大学);West Pomeranian University of Technology in Szczecin(什切青西波美拉尼亚理工大学);Univ Rouen Normandie, CNRS, INSA Rouen Normandie, Groupe de Physique des Matériaux, UMR 6634(鲁昂诺曼底大学,法国国家科学研究中心,鲁昂国立应用科学学院,物质物理研究组)
Boron-assisted synthesis of compositionally complex amorphous oxides via short-range-order-constrained generative design
Key Laboratory of Material Simulation Methods and Software of Ministry of Education, College of Physics, Jilin University(吉林大学物理学院教育部材料模拟方法与软件重点实验室);Aiiso Yufeng Li Family Department of Chemical and Nano Engineering, University of California, San Diego(加州大学圣地亚哥分校爱思唯尔俞峰李家族化学与纳米工程系);College of Chemistry and Molecular Engineering, Peking University(北京大学化学与分子工程学院);Institute of Molecular Engineering Plus, College of Chemistry, Fuzhou University(福州大学化学学院分子工程+研究院);Institute of Modern Physics, Fudan University(复旦大学现代物质结构研究所);Program in Materials Science and Engineering, University of California, San Diego(加州大学圣地亚哥分校材料科学与工程项目);Center for Renewable Energy and Storage Technologies, Physical Science and Engineering Division, King Abdullah University of Science and Technology(阿卜杜拉国王科技大学物理科学与工程学院可再生能源与储能技术中心);Department of Computer Science and Engineering, University of California, San Diego(加州大学圣地亚哥分校计算机科学与工程系)
Exploring mechanisms leading to composition errors in monazite (CePO4) analysed with atom probe tomography
Groupe de Physique des Materiaux UMR CNRS 6634, CORIA UMR 6614(材料物理小组 UMR CNRS 6634,CORIA UMR 6614);Univ. Grenoble Alpes, Grenoble INP, SIMaP(格勒诺布尔阿尔卑斯大学,格勒诺布尔理工学院,SIMaP);UJM-Saint-Etienne, CNRS, LGL-TPE(圣艾蒂安大学,CNRS,LGL-TPE)
A Workflow for Correlative in-situ Nano-chip Liquid Cell Transmission Electron Microscopy and Atom Probe Tomography Enabled by Cryogenic Plasma Focused Ion Beam
Random Electric Field Instabilities of Relaxor Ferroelectrics
弛豫铁电体是一种复杂的氧化物材料,在研究组分无序对相变的影响方面具有独特的优势。在这里,我们研究淬火立方随机电场对晶格不稳定性的影响,导致铁电转变,并表明,在微观模型和统计力学解决方案,即使是弱的组分无序也能阻止长程序的发展,具有各向异性和幂次的随机场态极化的定律相关性来自于它们的特征偶极力和它们固有的电荷无序的组合效应。我们比较和重现了几个关键的实验观察研究弛豫PbMg $_{1/3}$ Nb $_{2/3}$ O $_3$ -PbTiO $_3$ .
Understanding early stages of low-temperature hydrogen-driven direct co-reduction of Fe-Ni mixed oxide thin films at the near atomic scale
Chair for Materials Discovery and Interfaces, Institute for Materials, Ruhr-Universität Bochum(鲁尔大学材料研究所材料发现与界面讲席);Max Planck Institute for Sustainable Materials(马克斯·普朗克可持续材料研究所);Center for Interface Dominated High Performance Materials (ZGH), Ruhr-Universität Bochum(鲁尔大学界面主导高性能材料中心)
Influence of Ru content on electrocatalytic activity and defect formation of Au-Pd-Pt-Ru compositionally complex solid solution thin films
Max Planck Institute for Sustainable Materials(马克斯·普朗克可持续材料研究所);University of Shanghai for Science and Technology(上海理工大学);Ruhr University Bochum(波鸿鲁尔大学)
Specimen preparation for atom probe tomography analysis of complex multifunctional nanoparticles and nanostructures: state-of-the-art and challenges
University of Duisburg-Essen(杜伊斯堡-埃森大学);Max Planck Institute for Sustainable Materials(马克斯·普朗克可持续材料研究所);Korea University(高丽大学);Univ Rouen Normandie, CNRS, INSA Rouen Normandie, Groupe de Physique des Matériaux, UMR 6634(鲁昂诺曼底大学、法国国家科学研究中心、鲁昂诺曼底国立高等工程师学院、材料物理小组、UMR 6634)
Tritium for Nanoscale Hydrogen Analysis by Atom Probe Tomography
Institute for Applied Materials, Karlsruhe Institute of Technology(应用材料研究所,卡尔斯鲁厄理工学院);Karlsruhe Nano Micro Facility (KNMFi), Karlsruhe Institute of Technology(卡尔斯鲁厄纳米微设施(KNMFi),卡尔斯鲁厄理工学院);Institute of Functional Interfaces, Karlsruhe Institute of Technology(功能界面研究所,卡尔斯鲁厄理工学院)
Compositional Metrology of Atom Probe Applied to non-Metallic Materials
Università degli Studi di Padova(帕多瓦大学);Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Legnaro(意大利国家核物理研究所,莱尼亚罗国家实验室);CNR-ISMN, Istituto per lo Studio dei Materiali Nanostrutturati(意大利国家研究委员会纳米结构材料研究所);University of Rouen Normandie, INSA Rouen Normandie, CNRS, Groupe de Physique des Matériaux UMR 6634(鲁昂诺曼底大学,鲁昂诺曼底国立应用科学学院,法国国家科学研究中心,材料物理小组)
Morphological, nanostructural, and compositional evolution during phase separation of a model Ni-Al-Mo superalloy: Atom-probe tomographic experiments and lattice-kinetic Monte Carlo simulations
Autonomous Optimization of Complex Oxides for Thermochemical Fuel Production
Center of Hydrogen Science and School of Materials Science and Engineering, Shanghai Jiao Tong University(上海交通大学材料科学与工程学院及氢科学中心);Innovation Center for Future Materials, Zhangjiang Institute for Advanced Study, Shanghai Jiao Tong University(上海交通大学张江高等研究院未来材料创新中心);School of Mechanical Engineering, Shanghai Jiao Tong University(上海交通大学机械工程学院);Acceleration Consortium(加速联盟);Key Laboratory of Advanced Materials and Devices for Post-Moore Chips, Ministry of Education, University of Science and Technology Beijing(北京科技大学教育部先进后摩尔芯片材料与器件重点实验室);School of Mathematics and Physics, University of Science and Technology Beijing(北京科技大学数理学院);Department of Materials Science and Engineering, Northwestern University(西北大学材料科学与工程系);Department of Chemical and Biological Engineering, University at Buffalo, The State University of New York(纽约州立大学布法罗分校化学与生物工程系)
Atom Probe Tomography as an Emerging Tool for Understanding Defect-driven Mechanisms in HfO$_{2}$-based Ferroelectrics
Norwegian University of Science and Technology (NTNU)(挪威科技大学);Helmholtz-Zentrum Berlin für Materialien und Energie(柏林亥姆霍兹材料能源中心);Freie Universität Berlin(柏林自由大学);University of Nebraska, Lincoln(内布拉斯加大学林肯分校);University of Duisburg-Essen(杜伊斯堡-埃森大学);Research Center Future Energy Materials and Systems(未来能源材料与系统研究中心)
Ultra-Soft Ferrimagnetism in a High-Entropy Spinel Oxide Driven by Site-Selective Cation Disorder
Thapar Institute of Engineering and Technology(塔帕尔工程技术学院);UGC-DAE Consortium for Scientific Research(UGC-DAE科学研究联盟);Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026(波尔多大学、法国国家科学研究中心、波尔多国立理工学院、材料与化学研究组合中心);Laboratory Crismat, UMR6508 CNRS, Normandie University, ENSICAEN, UNICAEN(Crismat实验室、法国国家科学研究中心联合研究实验室6508、诺曼底大学、恩西辛高等学院、卡昂大学)
Selectivity in yttrium manganese oxide synthesis via local chemical potentials in hyperdimensional phase space
与分子合成形成鲜明对比的是,材料合成通常被认为缺乏选择性。在固态反应中设计选择性的少数已知方法具有有限的范围,例如拓扑异构反应或应变稳定。这一贡献描述了一个通用的方法来搜索大的化学空间,以确定选择性反应。这种新方法解释了名义上“无害的”Na $_2$ CO $_3$前体能够进行单相Y $_2$ Mn $_2$ O $_7$的复分解合成的能力-这是以前仅在极压下实现的结果,并且不能用Li $_2$ CO $_3$和K $_2$ CO $_3$的密切相关的前体实现。通过计算所需的变化,在所有可能的反应产物的界面在一个扩展的化学空间,包括Y,Mn,O,碱金属和卤素,使用热力学参数从密度泛函理论计算,我们确定的反应,最大限度地减少热力学竞争的中间体。以这种方式,只有Na基中间体使超维化学势空间中到Y $_2$ Mn $_2$ O $_7$的距离最小化,从而提供了对先前被认为是亚稳的相的选择性接近。验证这种机制的路径依赖的选择性的实验证据提供了从原位同步加速器为基础的晶体学分析确定的中间体。这种计算多维组成空间中的化学势距离的方法提供了一种用于设计选择性固态合成的通用方法,该方法对于获得亚稳相和识别可以降低合成温度和成本的反应途径是有用的。