We analytically derive from first physical principles the functional dependence of wireless channels on the RIS configuration for generic (i.e., potentially complex-scattering) RIS-parametrized radio environments. The wireless channel is a linear input-output relation that depends non-linearly on the RIS configuration because of two independent mechanisms: i) proximity-induced mutual coupling between close-by RIS elements; ii) reverberation-induced long-range coupling between all RIS elements. Mathematically, this "structural" non-linearity originates from the inversion of an "interaction" matrix that can be cast as the sum of an infinite Born series [for i)] or Born-like series [for ii)] whose $K$th term physically represents paths involving $K$ bounces between the RIS elements [for i)] or wireless entities [for ii)]. We identify the key physical parameters that determine whether these series can be truncated after the first and second term, respectively, as tacitly done in common cascaded models of RIS-parametrized wireless channels. Numerical results obtained with the physics-compliant PhysFad model and experimental results obtained with a RIS prototype in an anechoic (echo-free) chamber and rich-scattering reverberation chambers corroborate our analysis. Our findings raise doubts about the reliability of existing performance analysis and channel-estimation protocols for cases in which cascaded models poorly describe the physical reality.
Reconfigurable intelligent surfaces (RIS) have been presented as a solution to realize the concept of smart radio environments, wherein uninterrupted coverage and extremely high quality of service can be ensured. In this paper, assuming that multiple RIS are deployed in the propagation environment, the performance of a cascaded RIS network affected by imperfect phase estimation is evaluated. Specifically, we derive closed-form expressions for the outage probability, the ergodic capacity and the average symbol error probability that can be utilized to evaluate the coverage of the proposed netwo…
Reconfigurable intelligent surface (RIS) is envisioned to be a promising green technology to reduce the energy consumption and improve the coverage and spectral efficiency of massive multiple-input multiple-output (MIMO) wireless networks. In a RIS-aided MIMO system, the acquisition of channel state information (CSI) is important for achieving passive beamforming gains of the RIS, but is also challenging due to the cascaded property of the transmitter-RIS-receiver channel and the lack of signal processing capability of the passive RIS elements. The state-of-the-art approach for CSI acquisition…
Millimeter wave (mmWave) massive multiple-input multiple-output (massive MIMO) is one of the most promising technologies for the fifth generation and beyond wireless communication system. However, a large number of antennas incur high power consumption and hardware costs, and high-frequency communications place a heavy burden on the analog-to-digital converters (ADCs) at the base station (BS). Furthermore, it is too costly to equipping each antenna with a high-precision ADC in a large antenna array system. It is promising to adopt low-resolution ADCs to address this problem. In this paper, we …
Reconfigurable intelligent surface (RIS) is envisioned to be an essential component of the paradigm for beyond 5G networks as it can potentially provide similar or higher array gains with much lower hardware cost and energy consumption compared with the massive multiple-input multiple-output (MIMO) technology. In this paper, we focus on one of the fundamental challenges, namely the channel acquisition, in an RIS-assisted multiuser MIMO system. The state-of-the-art channel acquisition approach in such a system with fully passive RIS elements estimates the cascaded transmitter-to-RIS and RIS-to-…
Reconfigurable intelligent surface (RIS) constitutes an essential and promising paradigm that relies programmable wireless environment and provides capability for space-intensive communications, due to the use of low-cost massive reflecting elements over the entire surfaces of man-made structures. However, accurate channel estimation is a fundamental technical prerequisite to achieve the huge performance gains from RIS. By leveraging the low rank structure of RIS channels, three practical residual neural networks, named convolutional blind denoising network, convolutional denoising generative …
Robust Transmission Design for RIS-Assisted High-Speed Train Communication Coverage Enhancement With Imperfect Cascaded Channels
Beijing Jiaotong University（北京交通大学）；China Academy of Industrial Internet, Ministry of Industry and Information Technology（工业和信息化部工业互联网研究院）；Institute of Computing Technology, China Academy of Railway Sciences Corporation Limited（中国铁道科学研究院集团有限公司计算技术研究所）
Reconfigurable intelligent surface (RIS) has been recognized as a potential technology for 5G beyond and attracted tremendous research attention. However, channel estimation in RIS-aided system is still a critical challenge due to the excessive amount of parameters in cascaded channel. The existing compressive sensing (CS)-based RIS estimation schemes only adopt incomplete sparsity, which induces redundant pilot consumption. In this paper, we exploit the specific triple-structured sparsity of the cascaded channel, i.e., the common column sparsity, structured row sparsity after offset compensat…
A reconfigurable intelligent surface (RIS) consists of massive meta elements, which can improve the performance of future wireless communication systems. Existing RIS-aided channel estimation methods try to estimate the cascaded channel directly, incurring high computational and training overhead especially when the number of elements of RIS is extremely large. In this paper, we propose a cost-efficient channel estimation method via rank-one matrix factorization (MF). Specifically, if the RIS is employed near base station (BS), it is found that the RIS- aided channel can be factorized into a p…
This article aims to reduce huge pilot overhead when estimating the reconfigurable intelligent surface (RIS) relayed wireless channel. Motivated by the compelling grasp of deep learning in tackling nonlinear mapping problems, the proposed approach only activates a part of RIS elements and utilizes the corresponding cascaded channel estimate to predict another part. Through a synthetic deep neural network (DNN), the direct channel and active cascaded channel are first estimated sequentially, followed by the channel prediction for the inactive RIS elements. A three-stage training strategy is dev…
Reconfigurable intelligent surface (RIS) can manipulate the wireless communication environment by controlling the coefficients of RIS elements. However, due to the large number of passive RIS elements without signal processing capability, channel estimation in RIS assisted wireless communication system requires high pilot overhead. In the second part of this invited paper, we propose to exploit the double-structured sparsity of the angular cascaded channels among users to reduce the pilot overhead. Specifically, we first reveal the double-structured sparsity, i.e., different angular cascaded c…
The reconfigurable intelligent surface (RIS) is considered as a promising new technology for reconfiguring wireless communication environments. To acquire the channel information accurately and efficiently, we only turn on a fraction of all the RIS elements, formulate a sub-sampled RIS channel, and design a deep learning based scheme to extrapolate the full channel information from the partial one. Specifically, inspired by the ordinary differential equation (ODE), we set up connections between different data layers in a convolutional neural network (CNN) and improve its structure. Simulation …
Reconfigurable Intelligent Surfaces (RISs) have been recently considered as an energy-efficient solution for future wireless networks due to their fast and low power configuration enabling massive connectivity and low latency communications. Channel estimation in RIS-based systems is one of the most critical challenges due to the large number of reflecting unit elements and their distinctive hardware constraints. In this paper, we focus on the downlink of a RIS-assisted multi-user Multiple Input Single Output (MISO) communication system and present a method based on the PARAllel FACtor (PARAFA…
This letter investigates the reconfigurable intelligent surface (RIS)-aided massive multiple-input multiple-output (MIMO) systems with a two-timescale design. First, the zero-forcing (ZF) detector is applied at the base station (BS) based on instantaneous aggregated CSI, which is the superposition of the direct channel and the cascaded user-RIS-BS channel. Then, by leveraging the channel statistical property, we derive the closed-form ergodic achievable rate expression. Using a gradient ascent method, we design the RIS passive beamforming only relying on the long-term statistical CSI. We prove…
Reconfigurable intelligent surface (RIS) is a promising technology to avoid signal blockage by creating virtual line-of-sight (LOS) connectivity for free-space optical (FSO) and radio frequency (RF) wireless systems. This paper considers a mixed FSO-RF system by employing multiple RISs in both the links for multihop transmissions to extend the communication range. We develop probability density function (PDF) and cumulative density function (CDF) of the signal-to-noise ratio (SNR) for the cascaded channels by considering double generalized gamma (dGG) turbulence with pointing errors for the FS…
A reconfigurable intelligent surface (RIS) can be used to improve the channel gain between a base station (BS) and user equipment (UE), but only if its $N$ reflecting elements are configured properly. This requires accurate estimation of the cascaded channel from the UE to the BS through each RIS element. If the channel structure is not exploited, pilot sequences of length $N$ must be used, which is a major practical challenge since $N$ is typically at the order of hundreds. To address this problem without requiring user-specific channel statistics, we propose a novel estimator, called reduced…
Recent research has focused on reconfigurable intelligent surface (RIS)-assisted cell-free systems with the goal of enhancing coverage and lowering the cost of cell-free networks. However, current research makes the assumption that the perfect channel state information is known. Channel acquisition is, certainly, a difficulty in this case. This work is aimed at investigating RIS-assisted cell-free channel estimation. Toward this end, two unique characteristics are pointed out: 1) For all users, a common channel exists between the base station (BS) and the RIS; and 2) For all BSs, a common chan…
To reap the promised gain achieved by distributed reconfigurable intelligent surfaces (RISs)-enhanced communications in a wireless network, timing synchronization among these metasurfaces is an essential prerequisite in practice. This paper proposes a unified framework for the joint estimation of the unknown timing offsets and the RIS channel parameters, as well as the design of cooperative reflection and synchronization algorithm for the distributed multiple-RIS communication. Considering that RIS is usually a passive device with limited capability of signal processing, the individual timing …
Channel estimation is challenging for the reconfigurable intelligent surface (RIS)-aided wireless communications. Since the number of coefficients of the cascaded channel among the base station (BS), the RIS and the user equipments (UEs) is the product of the number of BS antennas, the number of RIS elements, and the number of UEs, the pilot overhead can be prohibitively high. In this paper, we propose a two-timescale channel estimation framework to exploit the property that the BS-RIS channel is high-dimensional but quasi-static, while the RIS-UE channel is mobile but low-dimensional. Specifi…
Reconfigurable Intelligent Surfaces (RISs) have been recently considered as an energy-efficient solution for future wireless networks. Their dynamic and low-power configuration enables coverage extension, massive connectivity, and low-latency communications. Channel estimation and signal recovery in RISbased systems are among the most critical technical challenges, due to the large number of unknown variables referring to the RIS unit elements and the transmitted signals. In this paper, we focus on the downlink of a RIS-assisted multi-user Multiple Input Single Output (MISO) communication syst…
Reconfigurable intelligent surface (RIS) has the potential to significantly enhance the network secure transmission performance by reconfiguring the wireless propagation environment. However, due to the passive nature of eavesdroppers and the cascaded channel brought by the RIS, the eavesdroppers' channel state information is imperfectly obtained at the base station. Under the channel uncertainty, the optimal phase-shift, power allocation, and transmission rate design for secure transmission is currently unknown due to the difficulty of handling the probabilistic constraint with coupled variab…
The reconfigurable intelligent surface (RIS) has drawn considerable attention for its ability to enhance the performance of not only the wireless communication but also the indoor localization with low-cost. This paper investigates the performance limits of the RIS-based near-field localization in the asynchronous scenario, and analyzes the impact of each part of the cascaded channel on the localization performance. The Fisher information matrix (FIM) and the position error bound (PEB) are derived. Besides, we also derive the equivalent Fisher information (EFI) for the position-related interme…
University of Electronic Science and Technology of China（电子科技大学）；Chongqing University of Posts and Telecommunications（重庆邮电大学）；Zhejiang University（浙江大学）；Singapore University of Technology and Design（新加坡科技设计大学）
To mitigate the effects of shadow fading and obstacle blocking, reconfigurable intelligent surface (RIS) has become a promising technology to improve the signal transmission quality of wireless communications by controlling the reconfigurable passive elements with less hardware cost and lower power consumption. However, accurate, low-latency and low-pilot-overhead channel state information (CSI) acquisition remains a considerable challenge in RIS-assisted systems due to the large number of RIS passive elements. In this paper, we propose a three-stage joint channel decomposition and prediction …
İstanbul Technical University（伊斯坦布尔理工大学）；Zhejiang University（浙江大学）；Balıkesir University（巴勒克埃西尔大学）；Carleton University（卡尔顿大学）
In this paper, graph attention network (GAT) is firstly utilized for the channel estimation. In accordance with the 6G expectations, we consider a high-altitude platform station (HAPS) mounted reconfigurable intelligent surface-assisted two-way communications and obtain a low overhead and a high normalized mean square error performance. The performance of the proposed method is investigated on the two-way backhauling link over the RIS-integrated HAPS. The simulation results denote that the GAT estimator overperforms the least square in full-duplex channel estimation. Contrary to the previously…
Singapore University of Technology and Design（新加坡科技设计大学）；Zhejiang University（浙江大学）；National and Kapodistrian University of Athens（雅典国立卡波迪斯特里安大学）；CentraleSupélec（巴黎中央理工-高等电力学院）；University Paris-Saclay（巴黎萨克雷大学）；Lagrange Mathematics and Computing Research Center（拉格朗日数学与计算研究中心）
Reconfigurable Intelligent Surfaces (RISs) have been recently considered as an energy-efficient solution for future wireless networks due to their fast and low-power configuration, which has increased potential in enabling massive connectivity and low-latency communications. Accurate and low-overhead channel estimation in RIS-based systems is one of the most critical challenges due to the usually large number of RIS unit elements and their distinctive hardware constraints. In this paper, we focus on the uplink of a RIS-empowered multi-user Multiple Input Single Output (MISO) uplink communicati…
