Reconfigurable Intelligent Surfaces (RISs) have been recently considered as an energy-efficient solution for future wireless networks due to their fast and low power configuration enabling massive connectivity and low latency communications. Channel estimation in RIS-based systems is one of the most critical challenges due to the large number of reflecting unit elements and their distinctive hardware constraints. In this paper, we focus on the downlink of a RIS-assisted multi-user Multiple Input Single Output (MISO) communication system and present a method based on the PARAllel FACtor (PARAFAC) decomposition to unfold the resulting cascaded channel model. The proposed method includes an alternating least squares algorithm to iteratively estimate the channel between the base station and RIS, as well as the channels between RIS and users. Our selective simulation results show that the proposed iterative channel estimation method outperforms a benchmark scheme using genie-aided information. We also provide insights on the impact of different RIS settings on the proposed algorithm.
In this work, we study the statistically robust beamforming design for an intelligent reflecting surfaces (IRS) assisted multiple-input single-output (MISO) wireless system under imperfect channel state information (CSI), where the channel estimation errors are assumed to be additive Gaussian. We aim at jointly optimizing the transmit/receive beamformers and IRS phase shifts to minimize the average mean squared error (MSE) at the user. In particular, to tackle the non-convex optimization problem, an efficient algorithm is developed by capitalizing on alternating optimization and majorization-m…
This paper defines the problem of optimizing the downlink multi-user multiple input, single output (MU-MISO) sum-rate for ground users served by an aerial reconfigurable intelligent surface (ARIS) that acts as a relay to the terrestrial base station. The deep deterministic policy gradient (DDPG) is proposed to calculate the optimal active beamforming matrix at the base station and the phase shifts of the reflecting elements at the ARIS to maximize the data rate. Simulation results show the superiority of the proposed scheme when compared to deep Q-learning (DQL) and baseline approaches.
In this letter, we analyze the spectral and energy efficiency of an intelligent reflecting surface (IRS)-assisted multiple-input single-output (MISO) downlink system with hardware impairments. An extended error vector magnitude (EEVM) model is utilized to characterize the impact of radio-frequency (RF) impairments at the access point (AP) and phase noise is considered for the imperfect IRS. We show that the spectral efficiency is limited due to the hardware impairments even when the numbers of AP antennas and IRS elements grow infinitely large, which is in contrast with the conventional case w…
In this work, we characterize the outage probability (OP) of an intelligent reflecting surface (IRS) assisted multi-user multiple-input-single-output (MU-MISO) communication system. Using a two-step approximation method, we approximate the signal-to-interference-plus-noise ratio (SINR) for any downlink user by a Log-Normal random variable. The impact of various system parameters is studied using the closed-form expression of OP. It is concluded that the position of IRS has a critical role, but an appropriate increase in the number of IRS elements would help to compensate for the loss in perfor…
We consider a multi-user multiple-input single-output (MISO) communications system which is assisted by a hybrid active-passive reconfigurable intelligent surface (RIS). Unlike conventional passive RISs, hybrid RIS is equipped with a few active elements with the ability to reflect and amplify incident signals to significantly improve the system performance. Towards a fairness-oriented design, we maximize the minimum rate among all users through jointly optimizing the transmit beamforming vectors and RIS reflecting/amplifying coefficients. Combining tools from block coordinate ascent and succes…
Distributed intelligent reflecting surfaces (IRSs) deployed in multi-user wireless communication systems promise improved system performance. However, the signal-to-interference-plus-noise ratio (SINR) analysis and IRSs optimization in such a system become challenging, due to the large number of involved parameters. The system optimization can be simplified if users are associated with IRSs, which in turn focus on serving the associated users. We provide a practical theoretical framework for the average SINR analysis of a distributed IRSs-assisted multi-user MISO system, where IRSs are optimiz…
Owing to the unique advantages of low cost and controllability, reconfigurable intelligent surface (RIS) is a promising candidate to address the blockage issue in millimeter wave (mmWave) communication systems, consequently has captured widespread attention in recent years. However, the joint active beamforming and passive beamforming design is an arduous task due to the high computational complexity and the dynamic changes of wireless environment. In this paper, we consider a RIS-assisted multi-user multiple-input single-output (MU-MISO) mmWave system and aim to develop a deep reinforcement l…
This paper studies an intelligent reflecting surface (IRS)-assisted multiuser multiple-input single-output (MISO) simultaneous wireless information and power transfer (SWIPT) system. In this system, a multi-antenna access point (AP) uses transmit beamforming to send both information and energy signals to a set of receivers each for information decoding (ID) or energy harvesting (EH), and a dedicatedly deployed IRS properly controls its reflecting phase shifts to form passive reflection beams for facilitating both ID and EH at receivers. Under this setup, we jointly optimize the (active) inform…
This paper considers an intelligent reflecting surface (IRS) aided multiple-input single-output communication system, where statistical channel state information (CSI) is exploited for transmit beamforming and IRS beamforming. A tight upper bound is derived for the ergodic capacity of the system. Based on which, the joint optimization of transmit beam and IRS beam are studied. Depending on whether a line-of-sight path exists between the access point and user, two different cases, namely, Rician fading and Rayleigh fading, are separately treated. Specifically, for the Rician fading case, an ite…
In this paper, we study resource allocation design for secure communication in intelligent reflecting surface (IRS)-assisted multiuser multiple-input single-output (MISO) communication systems. To enhance physical layer security, artificial noise (AN) is transmitted from the base station (BS) to deliberately impair the channel of an eavesdropper. In particular, we jointly optimize the phase shift matrix at the IRS and the beamforming vectors and AN covariance matrix at the BS for maximization of the system sum secrecy rate. To handle the resulting non-convex optimization problem, we develop an…
Reconfigurable intelligent surfaces (RISs) have been recently considered as a promising candidate for energy-efficient solutions in future wireless networks. Their dynamic and lowpower configuration enables coverage extension, massive connectivity, and low-latency communications. Due to a large number of unknown variables referring to the RIS unit elements and the transmitted signals, channel estimation and signal recovery in RIS-based systems are the ones of the most critical technical challenges. To address this problem, we focus on the RIS-assisted multi-user wireless communication system a…
We propose a new secure transmission scheme for uplink multiple-input single-output (MISO) orthogonal-frequency multiplexing (OFDM) systems in the presence of multiple eavesdroppers. Our proposed scheme utilizes the sub-channels orthogonality of OFDM systems to simultaneously transmit data and secret key symbols. The base station, Bob, shares secret key symbols with the legitimate user, Alice, using wiretap coding over a portion of the sub-channels. Concurrently, Alice uses the accumulated secret keys in her secret-key queue to encrypt data symbols using a one time pad (OTP) cipher and transmi…
The full-duplex (FD) communication can achieve higher spectrum efficiency than conventional half-duplex (HD) communication; however, self-interference (SI) is the key hurdle. This paper is the first work to propose the intelligent Omni surface (IOS)-assisted FD multi-input single-output (MISO) FD communication systems to mitigate SI, which solves the frequency-selectivity issue. In particular, two types of IOS are proposed, energy splitting (ES)-IOS and mode switching (MS)-IOS. We aim to maximize data rate and minimize SI power by optimizing the beamforming vectors, amplitudes and phase shifts…
We study the performance of a phase-noise impaired double reconfigurable intelligent surface (RIS)-aided multiuser (MU) multiple-input single-output (MISO) system under spatial correlation at both RISs and base-station (BS). The downlink achievable rate is derived in closed-form under maximum ratio transmission (MRT) precoding. In addition, we obtain the optimal phase-shift design at both RISs in closed-form for the considered channel and phase-noise models. Numerical results validate the analytical expressions, and highlight the effects of different system parameters on the achievable rate. O…
We address the max-min fairness design problem for a MU-MISO system with partial Channel State Information (CSI) at the Base Station (BS), consisting of an imperfect channel estimate and statistical knowledge of the estimation error, and perfect CSI at the receivers. The objective is to maximize the minimum Average Rate (AR) among users subject to a transmit power constraint. An unconventional transmission scheme is adopted where the Base Station (BS) transmits a common message in addition to the conventional private messages. In situations where the CSIT is not accurate enough to perform inte…
We focus on the realistic maximization of the uplink minimum signal-to-interference-plus-noise ratio (SINR) of a general multiple-input single-output (MISO) system assisted by an intelligent reflecting surface (IRS) in the large system limit accounting for HIs. In particular, we introduce the HIs at both the IRS (IRS-HIs) and the transceiver HIs (AT-HIs), usually neglected despite their inevitable impact. Specifically, the deterministic equivalent analysis enables the derivation of the asymptotic weighted maximum-minimum SINR with HIs by jointly optimizing the HIs-aware receiver, the transmit …
The energy-efficient (EE) design problem is very important to design a good performance network. Besides this, the security of communication is also important. Based on the new IRS technology, the EE maximization problem is formed in this paper for secure communication. We proposed a solution that outperformed other methods.
This work makes the preliminary contribution of studying the asymptotic performance of a multi-user intelligent reflecting surface (IRS) assisted-multiple-input single-output (MISO) downlink system under imperfect CSI. We first extend the existing least squares (LS) ON/OFF channel estimation protocol to a multi-user system, where we derive minimum mean squared error (MMSE) estimates of all IRS-assisted channels over multiple sub-phases. We also consider a low-complexity direct estimation (DE) scheme, where the BS obtains the MMSE estimate of the overall channel in a single sub-phase. Under bot…
We consider futuristic, intelligent reflecting surfaces (IRS)-aided communication between a base station (BS) and a user equipment (UE) for two distinct scenarios: a single-input, single-output (SISO) system whereby the BS has a single antenna, and a multi-input, single-output (MISO) system whereby the BS has multiple antennas. For the considered IRS-assisted downlink, we compute the effective capacity (EC), which is a quantitative measure of the statistical quality-of-service (QoS) offered by a communication system experiencing random fading. For our analysis, we consider the two widely-known…
Energy-efficient design and secure communications are of crucial importance in wireless communication networks. However, the energy efficiency achieved by using physical layer security can be limited by the channel conditions. In order to tackle this problem, an intelligent reflecting surface (IRS) assisted multiple input single output (MISO) network with independent cooperative jamming is studied. The energy efficiency is maximized by jointly designing the transmit and jamming beamforming and IRS phase-shift matrix under both the perfect channel state information (CSI) and the imperfect CSI. …
Reconfigurable Intelligent Surfaces (RISs) have been recently considered as an energy-efficient solution for future wireless networks. Their dynamic and low-power configuration enables coverage extension, massive connectivity, and low-latency communications. Channel estimation and signal recovery in RISbased systems are among the most critical technical challenges, due to the large number of unknown variables referring to the RIS unit elements and the transmitted signals. In this paper, we focus on the downlink of a RIS-assisted multi-user Multiple Input Single Output (MISO) communication syst…
Reconfigurable intelligent surface (RIS) assisted radio is considered as an enabling technology with great potential for the sixth-generation (6G) wireless communications standard. The achievable secrecy rate (ASR) is one of the most fundamental metrics to evaluate the capability of facilitating secure communication for RIS-assisted systems. However, the definition of ASR is based on Shannon's information theory, which generally requires long codewords and thus fails to quantify the secrecy of emerging delay-critical services. Motivated by this, in this paper we investigate the problem of maxi…
We consider a multi-user Multiple-Input Single-Output (MISO) communication system comprising of a multi-antenna base station communicating in the downlink simultaneously with multiple single-antenna mobile users. This communication is assumed to be assisted by a Large Intelligent Surface (LIS) that consists of many nearly passive antenna elements, whose parameters can be tuned according to desired objectives. The latest design advances on these surfaces suggest cheap elements effectively acting as low resolution (even $1$-bit resolution) phase shifters, whose joint configuration affects the el…
The concept of reconfiguring wireless propagation environments using intelligent reflecting surfaces (IRS)s has recently emerged, where an IRS comprises of a large number of passive reflecting elements that can smartly reflect the impinging electromagnetic waves for performance enhancement. Previous works have shown promising gains assuming the availability of perfect channel state information (CSI) at the base station (BS) and the IRS, which is impractical due to the passive nature of the reflecting elements. This paper makes one of the preliminary contributions of studying an IRS-assisted mu…
This paper investigates multiuser multi-input single-output (MISO) downlink communications assisted by a self-sustainable intelligent reflection surface (IRS), which can harvest power from the received signals. We study the joint design of the beamformer at an access point (AP) and the phase shifts and the power harvesting schedule at an IRS for maximizing the system sum-rate. The design is formulated as a non-convex optimization problem taking into account the capability of IRS elements to harvest wireless power for realizing self-sustainability. Subsequently, we propose a computationally-eff…
In this paper, we propose a downlink multiple-input single-output (MISO) transmission scheme, which is assisted by an intelligent reflecting surface (IRS) consisting of a large number of passive reflecting elements. In the literature, it has been proved that nonorthogonal multiple access (NOMA) can achieve the capacity region when the channels are quasi-degraded. However, in a conventional communication scenario, it is difficult to guarantee the quasi-degradation, because the channels are determined by the propagation environments and cannot be reconfigured. To overcome this difficulty, we foc…
Most works in IRS-assisted systems have ignored the impact of the inevitable residual hardware impairments (HWIs) at both the transceiver hardware and the IRS while any relevant works have addressed only simple scenarios, e.g., with single-antenna network nodes and/or without taking the randomness of phase noise at the IRS into account. In this work, we aim at filling up this gap by considering a general IRS-assisted multi-user (MU) multiple-input single-output (MISO) system with imperfect CSI and correlated Rayleigh fading. In parallel, we present a general computationally efficient methodolo…
The emergent technology of Reconfigurable Intelligent Surfaces (RISs) has the potential to transform wireless environments into controllable systems, through programmable propagation of information-bearing signals. Techniques stemming from the field of Deep Reinforcement Learning (DRL) have recently gained popularity in maximizing the sum-rate performance in multi-user communication systems empowered by RISs. Such approaches are commonly based on Markov Decision Processes (MDPs). In this paper, we instead investigate the sum-rate design problem under the scope of the Multi-Armed Bandits (MAB) …
This work focuses on the downlink of a single-cell multi-user system in which a base station (BS) equipped with $M$ antennas communicates with $K$ single-antenna users through a reconfigurable intelligent surface (RIS) installed in the line-of-sight (LoS) of the BS. RIS is envisioned to offer unprecedented spectral efficiency gains by utilizing $N$ passive reflecting elements that induce phase shifts on the impinging electromagnetic waves to smartly reconfigure the signal propagation environment. We study the minimum signal-to-interference-plus-noise ratio (SINR) achieved by the optimal linear…
The current literature on intelligent reflecting surface (IRS) focuses on optimizing the IRS phase shifts to yield coherent beamforming gains, under the assumption of perfect channel state information (CSI) of individual IRS-assisted links, which is highly impractical. This work, instead, considers the random rotations scheme at the IRS in which the reflecting elements only employ random phase rotations without requiring any CSI. The only CSI then needed is at the base station (BS) of the overall channel to implement the beamforming transmission scheme. Under this framework, we derive the sum-…
Reconfigurable intelligent surface (RIS)-based communication networks promise to improve channel capacity and energy efficiency. However, the promised capacity gains could be negligible for passive RISs because of the double pathloss effect. Active RISs can overcome this issue because they have reflector elements with a low-cost amplifier. This letter studies the active RIS-aided simultaneous wireless information and power transfer (SWIPT) in a multiuser system. The users exploit power splitting (PS) to decode information and harvest energy simultaneously based on a realistic piecewise nonline…
This paper investigates the reconfigurable reflecting surface (RIS)-aided multiple-input-single-output (MISO) systems with imperfect channel state information (CSI), where RIS-related channels are modeled by Rician fading. Considering the overhead and complexity in practical systems, we employ the low-complexity maximum ratio combining (MRC) beamforming at the base station (BS), and configure the phase shifts of the RIS based on long-term statistical CSI. Specifically, we first estimate the overall channel matrix based on the linear minimum mean square error (LMMSE) estimator, and evaluate the…
In this paper, we study the transmission design for reconfigurable intelligent surface (RIS)-aided multiuser communication networks. Different from most of the existing contributions, we consider long-term CSI-based transmission design, where both the beamforming vectors at the base station (BS) and the phase shifts at the RIS are designed based on long-term CSI, which can significantly reduce the channel estimation overhead. Due to the lack of explicit ergodic data rate expression, we propose a novel deep deterministic policy gradient (DDPG) based algorithm to solve the optimization problem, …
In this paper, we propose a polar coding scheme for secure communication over the multiple-input, single-output, single-antenna eavesdropper (MISOSE) fading channel. We consider the case of block fading channels with known eavesdropper channel state information (CSI) and the case of fading channels with known eavesdropper channel distribution information (CDI). We use the artificial noise assisted secure precoding method to maximize the secrecy capacity in the first case, and to overcome the unawareness of the eavesdropper CSI in the second case. We show that our proposed scheme can provide bo…
To fully exploit the additional dimension brought by reconfigurable intelligent surface (RIS), it is recently suggested by information theory that modulating information upon RIS phases is able to send extra information with increased communication rate. In this paper, we propose a novel superimposed RIS-phase modulation (SRPM) scheme to transfer extra messages by superimposing information-bearing phase offsets to conventionally optimized RIS phases. The proposed SRPM is interpreted as a universal framework for RIS phase modulation. Theoretical union bound of the average bit error rate (ABER) …
University of Electronic Science and Technology of China（电子科技大学）；Zhejiang University（浙江大学）
Reconfigurable intelligent surface (RIS) has become a promising technology to improve wireless communication in recent years. It steers the incident signals to create a favorable propagation environment by controlling the reconfigurable passive elements with less hardware cost and lower power consumption. In this paper, we consider a RIS-aided multiuser multiple-input single-output downlink communication system. We aim to maximize the weighted sum-rate of all users by joint optimizing the active beamforming at the access point and the passive beamforming vector of the RIS elements. Unlike most…
University of Electronic Science and Technology of China（电子科技大学）；Chongqing University of Posts and Telecommunications（重庆邮电大学）；Zhejiang University（浙江大学）；Singapore University of Technology and Design（新加坡科技设计大学）
To mitigate the effects of shadow fading and obstacle blocking, reconfigurable intelligent surface (RIS) has become a promising technology to improve the signal transmission quality of wireless communications by controlling the reconfigurable passive elements with less hardware cost and lower power consumption. However, accurate, low-latency and low-pilot-overhead channel state information (CSI) acquisition remains a considerable challenge in RIS-assisted systems due to the large number of RIS passive elements. In this paper, we propose a three-stage joint channel decomposition and prediction …
Wireless communications via intelligent reflecting surfaces (IRSs) has received considerable attention from both academia and industry. In particular, IRSs are able to create favorable wireless propagation environments with typically low-cost passive devices. While various IRS-aided wireless communication systems have been investigated in the literature, thus far, the optimal design of such systems is not well understood. In this paper, IRS-assisted single-user multiple-input single-output (MISO) communication is investigated. To maximize the spectral efficiency, a branch-and-bound (BnB) algor…
In practice, residual transceiver hardware impairments inevitably lead to distortion noise which causes the performance loss. In this paper, we study the robust transmission design for a reconfigurable intelligent surface (RIS)-aided secure communication system in the presence of transceiver hardware impairments. We aim for maximizing the secrecy rate while ensuring the transmit power constraint on the active beamforming at the base station and the unit-modulus constraint on the passive beamforming at the RIS. To address this problem, we adopt the alternate optimization method to iteratively o…
Intelligent reflecting surfaces (IRSs) have received considerable attention from the wireless communications research community recently. In particular, as low-cost passive devices, IRSs enable the control of the wireless propagation environment, which is not possible in conventional wireless networks. To take full advantage of such IRS-assisted communication systems, both the beamformer at the access point (AP) and the phase shifts at the IRS need to be optimally designed. However, thus far, the optimal design is not well understood. In this paper, a point-to-point IRS-assisted multiple-input…
Intelligent reflecting surfaces (IRSs) are regarded as key enablers of next-generation wireless communications, due to their capability of customizing the wireless propagation environment. In this paper, we investigate power-efficient resource allocation for IRS-assisted multiuser multiple-input single-output (MISO) systems. To minimize the transmit power, both the beamforming vectors at the access point (AP) and phase shifts at the IRS are jointly optimized while taking into account the minimum required quality-of-service (QoS) of the users. To tackle the non-convexity of the formulated optim…
