Complete readout of two-electron spin states in a double quantum dot
Martin Nurizzo, Baptiste Jadot, Pierre-André Mortemousque, Vivien Thiney, Emmanuel Chanrion, David Niegemann, Matthieu Dartiailh, Arne Ludwig, Andreas D. Wieck,… 展开作者
Martin Nurizzo, Baptiste Jadot, Pierre-André Mortemousque, Vivien Thiney, Emmanuel Chanrion, David Niegemann, Matthieu Dartiailh, Arne Ludwig, Andreas D. Wieck, Christopher Bäuerle, Matias Urdampilleta, Tristan Meunier
We propose and demonstrate complete spin state readout of a two-electron system in a double quantum dot probed by an electrometer. The protocol is based on repetitive single shot measurements using Pauli spin blockade and our ability to tune on fast timescales the detuning and the interdot tunnel coupling between the GHz and sub-Hz regime. A sequence of three distinct manipulations and measurements allows establishing if the spins are in S, Tzero, Tplus or Tminus state. This work points at a procedure to reduce the overhead for spin readout, an important challenge for scaling up spin qubit platforms.
We study the dynamics of a charge qubit that is capacitively coupled to an open double quantum dot. Depending on the qubit state, the transport through the open quantum dot may be resonant or off-resonant, such that the qubit affects the current through the open double dot. We relate the initial qubit state to the magnitude of an emerging transient current peak. The relation between these quantities enables the readout of not only the charge but also the phase of the qubit.
We propose an all optical spin initialization and readout concept for single self assembled quantum dots and demonstrate its feasibility. Our approach is based on a gateable single dot photodiode structure that can be switched between charge and readout mode. After optical electron generation and storage, we propose to employ a spin-conditional absorption of a circularly polarized light pulse tuned to the single negatively charged exciton transition to convert the spin information of the resident electron to charge occupancy. Switching the device to the charge readout mode then allows us to pr…
We demonstrate singlet-triplet readout and parity readout allowing to distinguish T0 and the polarized triplet states. We achieve high fidelity spin readout with an average fidelity above $99.9\%$ for a readout time of $20~μ$s and $99\%$ for $4~μ$s at a temperature of $0.5~K$. We initialize a singlet state in a single dot with a fidelity higher than $99\%$ and separate the two electrons while keeping the same spin state with $a \approx 95.6\%$ fidelity.
State readout is a key requirement for a quantum computer. For semiconductor-based qubit devices it is usually accomplished using a separate mesoscopic electrometer. Here we demonstrate a simple detection scheme in which a radio-frequency resonant circuit coupled to a semiconductor double quantum dot is used to probe its charge and spin states. These results demonstrate a new non-invasive technique for measuring charge and spin states in quantum dot systems without requiring a separate mesoscopic detector.
Magnetically coupling a nano-mechanical resonator to a double quantum dot confining two electrons can enable the manipulation of a single electron spin and the readout of the resonator's natural frequency. When the Larmor frequency matches the resonator frequency, the electron spin in one of the dots can be selectively flipped by the magnetised resonator. By simultaneously measuring the charge state of the two-electron double quantum dots, this transition can be detected thus enabling the natural frequency of the mechanical resonator to be determined.
We report the preparation and readout of multielectron high-spin states, a three-electron quartet, and a four-electron quintet, in a gate-defined GaAs/AlGaAs single quantum dot using spin filtering by quantum Hall edge states coupled to the dot. The readout scheme consists of mapping from multielectron to two-electron spin states and a subsequent two-electron spin readout, thus obviating the need to resolve dense multielectron energy levels. Using this technique, we measure the relaxations of the high-spin states and find them to be an order of magnitude faster than those of low-spin states. N…
We report the investigation of a single quantum dot charge storage device. The device allows selective optical charging of a single dot with electrons, storage of these charges over timescales much longer than microseconds and reliable optical readout of the charge occupancy using a time gated photoluminescence technique. This device enables us to directly investigate the electric field dependent tunneling escape dynamics of electrons at high electric fields over timescales up to 4 us. The results demonstrate that such structures and measurement techniques can be used to investigate charge and…
We are pursuing a capability to perform time resolved manipulations of single spins in quantum dot circuits involving more than two quantum dots. In this paper, we demonstrate full counting statistics as well as averaging techniques we use to calibrate the tunnel barriers. We make use of this to implement the Delft protocol for single shot single spin readout in a device designed to form a triple quantum dot potential. We are able to tune the tunnelling times over around three orders of magnitude. We obtain a spin relaxation time of 300 microseconds at 10T.
Sensitive charge detection has enabled qubit readout in solid-state systems. Recently, an alternative to the well-established charge detection via on-chip electrometers has emerged, based on in situ gate detectors and radio-frequency dispersive readout techniques. This approach promises to facilitate scalability by removing the need for additional device components devoted to sensing. Here, we perform gate-based dispersive readout of an accumulation-mode silicon quantum dot. We observe that the response of an accumulation-mode gate detector is significantly affected by its bias voltage, partic…
Silicon spin qubits show great promise as a scalable qubit platform for fault-tolerant quantum computing. However, fast high-fidelity readout of charge and spin states, which is required for quantum error correction, has remained elusive. Radio-frequency reflectometry enables rapid high-fidelity readout of GaAs spin qubits, but the relatively large resistances and capacitances of accumulation-mode Si quantum dot devices have made radio-frequency reflectometry challenging in these platforms. In this work, we implement radio-frequency reflectometry in a Si/SiGe quantum dot device with overlappin…
The bandstructure of bulk silicon has a six-fold valley degeneracy. Strain in the Si/SiGe quantum well system partially lifts the valley degeneracy, but the materials factors that set the splitting of the two lowest lying valleys are still under intense investigation. We propose a method for accurately determining the valley splitting in Si/SiGe double quantum dots embedded into a superconducting microwave resonator. We show that low lying valley states in the double quantum dot energy level spectrum lead to readily observable features in the cavity transmission. These features generate a "fin…
We report on the resonant optical pumping of the |\pm1> spin states of a single Mn dopant in an InAs/GaAs quantum dot embedded itself in a charge tuneable device. The experiment relies on a "W" scheme of transitions reached when a suitable longitudinal magnetic field is applied. The optical pumping is achieved via the resonant excitation of the central Λ system at the neutral exciton X0 energy. For a specific gate voltage, the red-shifted photoluminescence of the charged exciton X- is observed, which allows non-destructive readout of the spin polarization. An arbitrary spin preparation in the …
We have embedded a physically defined p-channel silicon MOS quantum dot (QD) device into an impedance transformer RC circuit. To decrease the parasitic capacitance and surpass the cutoff frequency of the device which emerges in MOS devices that have a top gate and act as RC low-pass filter, we fabricate a new device to reduce the device's top gate area from 400 $\mbox{$μ$m}^2$ to 0.09 $\mbox{$μ$m}^2$. Having a smaller top gate eliminates the cutoff frequency problem preventing the RF signal from reaching QD. We show that we have fabricated a single QD properly, which is essential for RF single…
We report on ambipolar gate-defined quantum dots in silicon on insulator (SOI) nanowires fabricated using a customised complementary metal-oxide-semiconductor (CMOS) process. The ambipolarity was achieved by extending a gate over an intrinsic silicon channel to both highly doped n-type and p-type terminals. We utilise the ability to supply ambipolar carrier reservoirs to the silicon channel to demonstrate an ability to reconfigurably define, with the same electrodes, double quantum dots with either holes or electrons. We use gate-based reflectometry to sense the inter-dot charge transition(IDT…
Owing to exchange interaction between the exciton and magnetic ion, a quantum dot embedding a single magnetic ion is a great platform for optical control of individual spin. In particular, a quantum dot provides strong and sharp optical transitions, which give experimental access to spin states of an individual magnetic ion. We show, however, that physics of quantum dot excitons also complicate spin readout and optical spin manipulation in such a system. This is due to electron-hole exchange interaction in anisotropic quantum dots, which affects the polarization of the emission lines. One of t…
We present a method for reading out the spin state of electrons in a quantum dot that is robust against charge noise and can be used even when the electron temperature exceeds the energy splitting between the states. The spin states are first correlated to different charge states using a spin dependence of the tunnel rates. A subsequent fast measurement of the charge on the dot then reveals the original spin state. We experimentally demonstrate the method by performing read-out of the two-electron spin states, achieving a single-shot visibility of more than 80%. We find very long triplet-to-si…
An important requirement for spin-based quantum information processing is reliable and fast readout of electron spin states, allowing for feedback and error correction. However, common readout techniques often require additional gate structures hindering device scaling or impose stringent constraints on the tuning configuration of the sensed quantum dots. Here, we operate an in-line charge sensor within a triple quantum dot, where one of the dots is coupled to a microwave cavity and used to readout the charge states of the other two dots. Owing to the proximity of the charge sensor, we observe…
A primary method of reading out a quantum dot hybrid qubit involves projection of the logical basis onto distinct charge states that are readily detected by an integrated charge sensing dot. However, in the simplest configuration, the excited charge state decays rapidly, making single-shot readout challenging. Here, we demonstrate a readout procedure where the qubit excited state is latched to a metastable charge configuration whose lifetime is tunnel rate limited, persisting here as long as 2.5 ms. Additionally, we show that working in the (4,1)-(3,2) charge configuration enables a latched re…
We report the dispersive charge-state readout of a double quantum dot in the few-electron regime using the in situ gate electrodes as sensitive detectors. We benchmark this gate-sensing technique against the well established quantum point contact (QPC) charge detector and find comparable performance with a bandwidth of 10 MHz and an equivalent charge sensitivity of 6.3 x 10-3 e/ \sqrt Hz. Dispersive gate-sensing alleviates the burden of separate charge detectors for quantum dot systems and promises to enable readout of qubits in scaled-up arrays.
We have investigated the spin preparation efficiency by optical pumping of individual Mn atoms embedded in CdTe/ZnTe quantum dots. Monitoring the time dependence of the intensity of the fluorescence during the resonant optical pumping process in individual quantum dots allows to directly probe the dynamics of the initialization of the Mn spin. This technique presents the convenience of including preparation and read-out of the Mn spin in the same step. Our measurements demonstrate that Mn spin initialization, at zero magnetic field, can reach an efficiency of 75% and occurs in the tens of \emp…
We use microwave radiation generated by a semiconductor double quantum dot (DQD) micromaser for charge state detection. A cavity is populated with n_c ~ 6000 photons by driving a current through an emitter DQD. These photons are used to sense the charge state of a target DQD that is located at the opposite end of the cavity. Charge dynamics in the target DQD influence the output power and emission frequency of the maser. Three different readout mechanisms are compared. The detection scheme requires no cavity input field and may potentially be used to improve the scalability of semiconductor an…
Quantum dot arrays are a versatile platform for the implementation of spin qubits, as high-bandwidth sensor dots can be integrated with single-, double- and triple-dot qubits yielding fast and high-fidelity qubit readout. However, for undoped silicon devices, reflectometry off sensor ohmics suffers from the finite resistivity of the two-dimensional electron gas (2DEG), and alternative readout methods are limited to measuring qubit capacitance, rather than qubit charge. By coupling a surface-mount resonant circuit to the plunger gate of a high-impedance sensor, we realized a fast charge sensing…
We study the dynamics of a single electron spin in a double quantum dot (DQD) and its readout via a quantum point contact (QPC). We model the system microscopically and derive rate equations for the reduced electron density matrix of the DQD. Two cases with one and two electrons in the DQD are studied. In the one-electron case, with different Zeeman splittings in the two dots, the electron spin states are distinctly characterized by a constant and an oscillatory current through the QPC. In the two-electron case, the readout of the spin state of the electron in one of the dots called the qubit …
Recently, the possibility of an all electrical scheme of preparation and readout for a single spin state in a single quantum dot attached to spin biased leads has been shown [F. Chi et al., Phys. Rev. B 81, 075310 (2010)]. However, spin scattering mechanisms have been omitted. To remedy this lack we consider the influence of the spin-flip scattering process on the proposed preparation and readout scheme.
We demonstrate optical readout of a single electron spin using cavity quantum electrodynamics. The spin is trapped in a single quantum dot that is strongly coupled to a nanophotonic cavity. Selectively coupling one of the optical transitions of the quantum dot to the cavity mode results in a spin-dependent cavity reflectivity that enables projective spin measurements by monitoring the reflected intensity of an incident optical field. Using this approach, we demonstrate spin readout fidelity of 0.61 for a quantum dot that has a poor branching ratio of 0.43. Achieving this fidelity using resonan…
Nuclear spins show long coherence times and are well isolated from the environment, which are properties making them promising for quantum information applications. Here, we present a method for nuclear spin readout by probing the transmission of a microwave resonator. We consider a single electron in a silicon quantum dot-donor device interacting with a microwave resonator via the electric dipole coupling and subjected to a homogeneous magnetic field and a transverse magnetic field gradient. In our scenario, the electron spin interacts with a $^{31}\mathrm{P}$ defect nuclear spin via the hype…
Quantum computers require interfaces with classical electronics for efficient qubit control, measurement and fast data processing. Fabricating the qubit and the classical control layer using the same technology is appealing because it will facilitate the integration process, improving feedback speeds and offer potential solutions to wiring and layout challenges. Integrating classical and quantum devices monolithically, using complementary metal-oxide-transistor (CMOS) processes, enables the processor to profit from the most mature industrial technology for the fabrication of large scale circui…
We present a theory and experiment demonstrating optical readout of charge and spin in a single InAs/GaAs self-assembled quantum dot. By applying a magnetic field we create the filling factor 2 quantum Hall singlet phase of the charged exciton. Increasing or decreasing the magnetic field leads to electronic spin-flip transitions and increasing spin polarization. The increasing total spin of electrons appears as a manifold of closely spaced emission lines, while spin flips appear as discontinuities of emission lines. The number of multiplets and discontinuities measures the number of carriers a…
Silicon spin qubits have emerged as a promising path to large-scale quantum processors. In this prospect, the development of scalable qubit readout schemes involving a minimal device overhead is a compelling step. Here we report the implementation of gate-coupled rf reflectometry for the dispersive readout of a fully functional spin qubit device. We use a p-type double-gate transistor made using industry-standard silicon technology. The first gate confines a hole quantum dot encoding the spin qubit, the second one a helper dot enabling readout. The qubit state is measured through the phase res…
Silicon spin qubits are promising candidates for realising large scale quantum processors, benefitting from a magnetically quiet host material and the prospects of leveraging the mature silicon device fabrication industry. We report the measurement of an electron spin in a singly-occupied gate-defined quantum dot, fabricated using CMOS compatible processes at the 300 mm wafer scale. For readout, we employ spin-dependent tunneling combined with a low-footprint single-lead quantum dot charge sensor, measured using radiofrequency gate reflectometry. We demonstrate spin readout in two devices usin…
We demonstrate coherent control of a quantum dot exciton using photocurrent detection with a sinusoidal reverse bias. Optical control is performed at low bias, where tunneling-limited coherence times are long. Following this step, the tunneling rates are increased to remove the long-lived hole, achieving a high photocurrent signal. For a detection efficiency of 68%, electron and hole tunneling times during optical control of 200 ps and 20 ns can be achieved, compared to 120 ps and 7 ns for the constant bias case, respectively.
Electrical readout of spin qubits requires fast and sensitive measurements, but these are hindered by poor impedance matching to the device. We demonstrate perfect impedance matching in a radio-frequency readout circuit, realized by incorporating voltage-tunable varactors to cancel out parasitic capacitances. In the optimized setup, a capacitance sensitivity of $1.6~\mathrm{aF}/\sqrt{\mathrm{Hz}}$ is achieved at a maximum source-drain bias of $170~μ$V root-mean-square and with bandwidth above $15~$MHz. Coulomb blockade is measured via both conductance and capacitance in a quantum dot, and the …
A cryogenic quantum dot thermometer is calibrated and operated using only a single non-galvanic gate connection. The thermometer is probed with radio-frequency reflectometry and calibrated by fitting a physical model to the phase of the reflected radio-frequency signal taken at temperatures across a small range. Thermometry of the source and drain reservoirs of the dot is then performed by fitting the calibrated physical model to new phase data. The thermometer can operate at the transition between thermally broadened and lifetime broadened regimes, and outside the temperatures used in calibra…
Single-shot read-out of individual qubits is typically the slowest process among the elementary single- and two-qubit operations required for quantum information processing. Here, we use resonance fluorescence from a single-electron charged quantum dot to read-out the spin-qubit state in 800 nanoseconds with a fidelity exceeding 80%. Observation of the spin evolution on longer timescales reveals quantum jumps of the spin state: we use the experimentally determined waiting-time distribution to characterize the quantum jumps. Embedding a quantum dot in a photonic nanostructure could be used to e…
Developing fast and accurate control and readout techniques is an important challenge in quantum information processing with semiconductor qubits. Here, we study the dynamics and the coherence properties of a GaAs/AlGaAs double quantum dot (DQD) charge qubit strongly coupled to a high-impedance SQUID array resonator. We drive qubit transitions with synthesized microwave pulses and perform qubit readout through the state dependent frequency shift imparted by the qubit on the dispersively coupled resonator. We perform Rabi oscillation, Ramsey fringe, energy relaxation and Hahn-echo measurements …
We theoretically examine a scheme for projectively reading out the parity state of a pair of Majorana bound states (MBS) using a tunnel coupled quantum dot. The dot is coupled to one end of the topological wire but isolated from any reservoir, and is capacitively coupled to a charge sensor for measurement. The combined parity of the MBS-dot system is conserved and charge transfer between the MBS and dot only occurs through resonant tunnelling. Resonance is controlled by the dot potential through a local gate and by the MBS energy splitting due to the overlap of the MBS pair wavefunctions. The …
We put forward nonadiabatic charge pumping as a method for accessing the different charge relaxation rates as well as the relaxation rates of excited orbital states in double-quantum-dot setups, based on extremely size-limited quantum dots and dopant systems. The rates are obtained in a well-separated manner from plateaus, occurring when comparing the steady-state current for reversed driving cycles. This yields a reliable readout independent of any fitting parameters. Importantly, the nonadiabatic pumping spectroscopy essentially exploits the same driving scheme as the operation of these devi…
The efficient single photon emission capabilities of quantum dot molecules position them as promising platforms for quantum information processing. Furthermore, quantum dot molecules feature a "decoherence-free" subspace that enables spin qubits with long coherence time. To efficiently read out the spin state within this subspace requires optically cycling isolated transitions that originate from a triplet manifold within the quantum dot molecule. We propose and theoretically study a two-stage spin readout protocol within this decoherence-free subspace that allows single-shot readout performan…
We investigate gate voltage dependence of electrical readout noise in high-speed rf reflectometry using gallium arsenide quantum dots. The fast Fourier transform spectrum from the real time measurement reflects build-in device noise and circuit noise including the resonator and the amplifier. We separate their noise spectral components by model analysis. Detail of gate voltage dependence of the flicker noise is investigated and compared to the charge sensor sensitivity. We point out that the dominant component of the readout noise changes by the measurement integration time.
Electron spins in silicon quantum dots provide a promising route towards realising the large number of coupled qubits required for a useful quantum processor. At present, the requisite single-shot spin qubit measurements are performed using on-chip charge sensors, capacitively coupled to the quantum dots. However, as the number of qubits is increased, this approach becomes impractical due to the footprint and complexity of the charge sensors, combined with the required proximity to the quantum dots. Alternatively, the spin state can be measured directly by detecting the complex impedance of sp…
Electrons confined in semiconductor quantum dot arrays have both charge and spin degrees of freedom. The spin provides a well-controllable and long-lived qubit implementation. The charge configuration in the dot array is influenced by Coulomb repulsion, and the same interaction enables charge sensors to probe this configuration. Here we show that the Coulomb repulsion allows an initial charge transition to induce subsequent charge transitions, inducing a cascade of electron hops, like toppling dominoes. A cascade can transmit information along a quantum dot array over a distance that extends b…
Superconducting resonators enable fast characterization and readout of mesoscopic quantum devices. Finding ways to perform measurements of interest on such devices using resonators only is therefore of great practical relevance. We report the experimental investigation of an InAs nanowire multi-quantum dot device by probing GHz resonators connected to the device. First, we demonstrate accurate extraction of the DC conductance from measurements of the high-frequency admittance. Because our technique does not rely on DC calibration, it could potentially obviate the need for DC measurements in se…
RF reflectometry offers a fast and sensitive method for charge sensing and spin readout in gated quantum dots. We focus in this work on the implementation of RF readout in accumulation-mode gate-defined quantum dots, where the large parasitic capacitance poses a challenge. We describe and test two methods for mitigating the effect of the parasitic capacitance, one by on-chip modifications and a second by off-chip changes. We demonstrate that these methods enable high-performance charge readout in Si/SiGe quantum dots, achieving a fidelity of 99.9% for a measurement time of 1 $μ$s.
