In this study, we fabricate 5-30-nm-thick films of FeSe/STO using pulsed laser deposition (PLD). The grown films exhibit superconductivity with an onset $T_{\mathrm{c}}$ that is much higher than that of bulk FeSe under ambient pressure. The observed $T_{\mathrm{c}}$ values are exceptionally high in terms of the strain vs. $T_{\mathrm{c}}$ relationship of the same material established so far. Furthermore, $T_{\mathrm{c}}$ increases as the film thickness decreases, except for films thinner than 10 nm. This thickness dependence of $T_{\mathrm{c}}$ is in good agreement with the results reported for films grown by molecular beam epitaxy (MBE) that exhibit interface superconductivity. These results indicate the realization of interface superconductivity in PLD-grown FeSe/STO. Furthermore, our PLD technique requires no post-annealing to realize interface superconductivity, which is different from MBE techniques. Because the PLD technique has the advantage that various interfaces can be fabricated easily by simply altering the target materials, our results open novel routes to study interface superconductivity toward higher $T_{\mathrm{c}}$ by systematic control of the interface.
We report comprehensive angle-resolved photoemission investigations on the electronic structure of single crystal multiple-layer FeSe films grown on CaF2 substrate by pulsed laser deposition (PLD) method. Measurements on FeSe/CaF2 samples with different superconducting transition temperatures Tc of 4 K, 9 K and 14 K reveal electronic difference in their Fermi surface and band structure. Indication of the nematic phase transition is observed from temperature-dependent measurements of these samples; the nematic transition temperature is 140-160 K, much higher than 90 K for the bulk FeSe. Potassi…
Monolayer films of FeSe grown on SrTiO$_3$ substrates exhibit significantly higher superconducting transition temperatures than those of bulk FeSe. Interaction of electrons in the FeSe layer with dipolar SrTiO$_3$ phonons has been suggested as the cause of the enhanced transition temperature. In this paper we systematically study the coupling of SrTiO$_3$ longitudinal optical phonons to the FeSe electron, including also electron-electron Coulomb interactions at the random phase approximation level. We find that the electron-phonon interaction between FeSe and SrTiO$_3$ substrate is almost enti…
Monolayer films of FeSe grown on SrTiO$_3$ substrates are electron doped relative to bulk and exhibit a significantly higher superconducting transition temperatures. We present density functional calculations and a modified Schottky model incorporating the strong paraelectricity of SrTiO$_3$ which demonstrate that the doping may be due to charge transfer from SrTiO$_3$ impurity bands driven by work function mismatch. Physically relevant levels of Nb doping are shown to lead to doping of the FeSe compatible with observation. The coupling of electrons in FeSe to polar phonons in the depletion re…
Based on recent high-resolution angle-resolved photoemission spectroscopy measurement in monolayer FeSe grown on SrTiO$_{3}$, we constructed a tight-binding model and proposed a superconducting (SC) pairing function which can well fit the observed band structure and SC gap anisotropy. Then we investigated the spin excitation spectra in order to determine the possible sign structure of the SC order parameter. We found that a resonance-like spin excitation may occur if the SC order parameter changes sign along the Fermi surfaces. However, this resonance is located at different locations in momen…
Among the recently discovered iron-based superconductors, ultrathin films of FeSe grown on SrTiO3 substrates have uniquely evolved into a high superconducting-transition-temperature (TC) material. The mechanisms for the high-TC superconductivity are ongoing debate mainly with the superconducting gap characterized with in-situ analysis for FeSe films grown by bottom-up molecular-beam epitaxy. Here, we demonstrate the alternative access to investigate the high-TC superconductivity in ultrathin FeSe with top-down electrochemical etching technique in three-terminal transistor configuration. In add…
The significant role of interfacial coupling on the superconductivity enhancement in FeSe films on SrTiO3 has been widely recognized. But the explicit origination of this coupling is yet to be identified. Here by surface phonon measurements using high resolution electron energy loss spectroscopy, we found electric field generated by Fuchs-Kliewer (F-K) phonon modes of SrTiO3 can penetrate into FeSe films and strongly interact with electrons therein. The mode-specific electron-phonon coupling (EPC) constant for the ~92 meV F-K phonon is ~0.25 in the single-layer FeSe on SrTiO3. With increasing …
Interface charge transfer and electron-phonon coupling have been suggested to play a crucial role in the recently discovered high-temperature superconductivity of single unit-cell FeSe films on SrTiO3. However, their origin remains elusive. Here, using ultraviolet photoemission spectroscopy (UPS) and element-sensitive X-ray photoemission spectroscopy (XPS), we identify the strengthened Ti-O bond that contributes to the interface enhanced electron-phonon coupling and unveil the band bending at the FeSe/SrTiO3 interface that leads to the charge transfer from SrTiO3 to FeSe films. We also observe…
Understanding the superconductivity at the interface of FeSe/SrTiO3 is a problem of great contemporary interest due to the significant increase in critical temperature (Tc) compared to that of bulk FeSe, as well as the possibility of an unconventional pairing mechanism and topological superconductivity. We report a study of the influence of a capping layer on superconductivity in thin films of FeSe grown on SrTiO3 using molecular beam epitaxy. We used in vacuo four-probe electrical resistance measurements and ex situ magneto-transport measurements to examine the effect of three capping layers …
We report the superconductivity evolution of one unit cell (1-UC) and 2-UC FeSe films on SrTiO3(001) substrates with potassium (K) adsorption. By in situ scanning tunneling spectroscopy measurement, we find that the superconductivity in 1-UC FeSe films is continuously suppressed with increasing K coverage, whereas non-superconducting 2-UC FeSe films become superconducting with a gap of ~17 meV or ~11 meV depending on whether the underlying 1-UC films are superconducting or not. This work explicitly reveals that the interface electron-phonon coupling is strongly related to the charge transfer a…
Interface-enhanced high-temperature superconductivity in one unit-cell (UC) FeSe film on SrTiO3(001) (STO) substrate has recently attracted much attention in condensed matter physics and material science. Here, by ex situ transport measurements, we report on the superconductivity in FeSe ultra-thin films with different thickness on STO substrate. We find that the onset superconducting transition temperature (Tc) decreases with increasing film thickness of FeSe, which is opposite to the behavior usually observed in traditional superconductor films. By systematic post-annealing of 5 UC FeSe film…
Synthesis of monolayer FeSe on SrTiO3, with greatly enhanced superconductivity compared to bulk FeSe, remains difficult. Lengthy annealing within a certain temperature window is always required to achieve superconducting samples as reported by different groups around the world, but the mechanism of annealing in inducing superconductivity has not been elucidated. We grow FeSe films on SrTiO3 by molecular beam epitaxy and adjust the stoichiometry by depositing additional small amounts of Fe atoms. The monolayer films become superconducting after the Fe deposition without any annealing, and show …
Recent observation of $\sim$ 10 times higher critical temperature in FeSe monolayer compared with its bulk phase has drawn a great deal of attention because the electronic structure in the monolayer phase appears to be different than bulk FeSe. Using a combination of density functional theory and dynamical mean field theory, we find electronic correlations have important effects on the predicted atomic-scale geometry and the electronic structure of the monolayer FeSe on SrTiO$_3$. The electronic correlations are dominantly controlled by the Se-Fe-Se angle either in the bulk phase or the monola…
Determination of the pairing symmetry in monolayer FeSe films on SrTiO3 is a requisite for understanding the high superconducting transition temperature in this system, which has attracted intense theoretical and experimental studies but remains controversial. Here, by introducing several types of point defects in FeSe monolayer films, we conduct a systematic investigation on the impurity-induced electronic states by spatially resolved scanning tunneling spectroscopy. Ranging from surface adsorption, chemical substitution to intrinsic structural modification, these defects generate a variety o…
We perform in-plane optical spectroscopy measurement on (00l) FeSe thin-film grown on SrTiO$_3$ substrate by pulsed laser deposition method. The study indicates that the low frequency conductivity consists of two Drude components, a broad one which takes up most of the spectral weight and a very narrow one roughly below 100-150 \cm. The narrow Drude component locates at so low frequencies that no such behavior was observed in iron pnictides. The overall plasma frequency is found to be smaller than the FeAs based compounds, suggesting a stronger correlation effect. Similar to iron pnictides, a …
Single-layer FeSe film on SrTiO3(001) was recently found to be the champion of interfacial superconducting systems, with a much enhanced superconductivity than the bulk iron-based superconductors. Its superconducting mechanism is of great interest. Although the film has a simple Fermi surface topology, its pairing symmetry is unsettled. Here by using low-temperature scanning tunneling microscopy (STM), we systematically investigated the superconductivity of single-layer FeSe/SrTiO3(001) films. We observed fully gapped tunneling spectrum and magnetic vortex lattice in the film. Quasi-particle i…
We investigate the effects of electron-phonon coupling, as well as of spin and charge fluctuations on the superconducting state in a single layer of FeSe on SrTiO$_3$ substrate. These three bosonic mediators of Cooper pairing are treated on equal footing in a multichannel, full-bandwidth, multiband, and anisotropic Eliashberg theory of the interacting state. Our self-consistent calculations show that an s-wave symmetry of the superconducting gap is compatible only with a complete absence of spin fluctuations. When spin fluctuations are present, the sign-changing nodeless d-wave pairing symmetr…
The recent observation of high-temperature superconductivity in one unit cell thick FeSe on SrTiO3 (1UC FeSe/STO)1 initiated a new pathway to realizing even higher transition temperature (Tc) superconductors and established a promising different paradigm to understand the mechanism of high temperature superconductivity2-10. However, independent confirmation on the high Tc value, the role of capping layer in reducing Tc, and the underlying mechanism of the novel superconductivity remain open questions11. Here we report a time-resolved study of the excited state ultrafast dynamics of 1UC FeSe/ST…
The high temperature superconductivity in single-unit-cell (1UC) FeSe on SrTiO3 (STO)(001) and the observation of replica bands by angle-resolved photoemission spectroscopy (ARPES) have led to the conjecture that the coupling between FeSe electron and the STO phonon is responsible for the enhancement of Tc over other FeSe-based superconductors1,2. However the recent observation of a similar superconducting gap in FeSe grown on the (110) surface of STO raises the question of whether a similar mechanism applies3,4. Here we report the ARPES study of the electronic structure of FeSe grown on STO(1…
We investigate the electronic and magnetic properties of FeSe monolayer on the anisotropic SrTiO$_3$ (110) surface. With compressive strain along $[1\bar{1}0]$ direction from the substrate, the monolayer FeSe possesses a staggered bipartite iron lattice with an height difference around 0.06Å~ along the out-plane direction. The staggering causes stronger magnetic frustration between the collinear and checkerboard antiferromagnetic orders, and the strain elongates one electron and two hole pockets along the strain direction and the remaining hole pocket along the orthogonal direction. The strain…
Recently, the signs of both superconducting transition temperature (Tc) beyond 60 K and spin density wave (SDW) have been observed in FeSe thin film on SrTiO3 (STO) substrate, which suggests a strong interplay between superconductivity and magnetism. With the first-principles calculations, we find that the substrate-induced tensile strain tends to stabilize the SDW state in FeSe thin film by enhancing of the next-nearest-neighbor superexchange antiferromagnetic interaction bridged through Se atoms. On the other hand, we find that when there are oxygen vacancies in the substrate, the significan…
The discovery of higher-temperature superconductivity in FeSe monolayers on SrTiO$_3$ (STO) substrates has sparked a surge of interest in the interface superconductivity. One point of the agreement reached to date is that modulation doping by impurities in the substrate is critical for the enhanced superconductivity. Remarkably, the universal doping of about 0.1 electrons per Fe, \textit{i.e.}, so-called ``magic'' doping, has been observed on a range of Ti oxide substrates, which concludes that there likely is some important interaction limiting the FeSe doping. Our study discovers that the po…
Alkali-metal (potassium) adsorption on FeSe thin films with thickness from two unit cells (UC) to 4-UC on SrTiO3 grown by molecular beam epitaxy is investigated with a low-temperature scanning tunneling microscope. At appropriate potassium coverage (0.2-0.3 monolayer), the tunneling spectra of the films all exhibit a superconducting-like gap larger than 11 meV (five times the gap value of bulk FeSe), and two distinct features of characteristic phonon modes at 11 meV and 21 meV. The results reveal the critical role of the interface enhanced electron-phonon coupling for possible high temperature…
We report high temperature superconductivity in one unit-cell (1-UC) FeSe films grown on STO(110) substrate by molecular beam epitaxy. By in-situ scanning tunneling spectroscopy measurement, we observed a superconducting gap as large as 17 meV. Transport measurements on 1-UC FeSe/STO(110) capped with FeTe layers reveal superconductivity with an onset TC of 31.6 K and an upper critical magnetic field of 30.2 T. We also find that the TC can be further increased by an external electric field, but the effect is smaller than that on STO(001) substrate. The study points out the important roles of in…
We examine the impact of interfacial phonons on the superconducting state of FeSe/SrTiO$_3$ developing a material's specific multiband, full bandwidth, and anisotropic Eliashberg theory for this system. Our self-consistent calculations highlight the importance of the interfacial electron-phonon interaction, which is hidden behind the seemingly weak-coupling constant λ$_m$ = 0.4, in mediating the high T$_c$, and explain other puzzling experimental observations, such as the s-wave symmetry and replica bands. We discover that the formation of replica bands has a T$_c$ decreasing effect that is ne…
Mono- and multilayer FeSe thin films grown on SrTiO$_\mathrm{3}$ and BiTiO$_\mathrm{3}$ substrates exhibit a greatly enhanced superconductivity over that found in bulk FeSe. A number of proposals have been advanced for the mechanism of this enhancement. One possibility is the introduction of a cross-interface electron-phonon ($e$-$ph$) interaction between the FeSe electrons and oxygen phonons in the substrates that is peaked in the forward scattering (small ${\bf q}$) direction due to the two-dimensional nature of the interface system. Motivated by this, we explore the consequences of such an …
Single unit cell films of iron selenide (1UC FeSe) grown on SrTiO3 (STO) substrates have recently shown superconducting energy gaps opening at temperatures close to the boiling point of liquid nitrogen (77 K), a record for iron-based superconductors. Towards understanding why Cooper pairs form at such high temperatures, a primary question to address is the role, if any, of the STO substrate. Here, we report high resolution angle resolved photoemission spectroscopy (ARPES) results which reveal an unexpected and unique characteristic of the 1UC FeSe/STO system: shake-off bands suggesting the pre…
We study the consequences of an electron-phonon ($e$-$ph$) interaction that is strongly peaked in the forward scattering ($\mathbf{q} = 0$) direction in a two-dimensional superconductor using Migdal-Eliashberg theory. We find that strong forward scattering results in an enhanced $T_c$ that is linearly proportional to the strength of the dimensionless $e$-$ph$ coupling constant $λ_m$ in the weak coupling limit. This interaction also produces distinct replica bands in the single-particle spectral function, similar to those observed in recent angle-resolved photoemission experiments on FeSe monol…
Interface-enhanced high-temperature superconductivity in one unit-cell (UC) FeSe films on SrTiO3(001) (STO) substrate has recently attracted much attention in condensed matter physics and material science. By combined in-situ scanning tunneling microscopy/spectroscopy (STM/STS) and ex-situ scanning transmission electron microscopy (STEM) studies, we report on atomically resolved structure including both lattice constants and actual atomic positions of the FeSe/STO interface under both non-superconducting and superconducting states. We observed TiO2 double layers (DLs) and significant atomic di…
Single monolayer FeSe film grown on Nb-doped SrTiO$_3$(001) substrate shows the highest superconducting transition temperature (T$_C$ $\sim$ 100 K) among the iron-based superconductors (iron-pnictide), while T$_C$ of bulk FeSe is only $\sim$ 8 K. Antiferromagnetic spin fluctuations were believed to be crucial in iron-pnictides, which has inspired several proposals to understand the FeSe/SrTiO$_3$ system. Although bulk FeSe does not show the antiferromagnetic order, calculations suggest that the parent FeSe/SrTiO$_3$ films are AFM. Experimentally, due to lacking of direct probe, the magnetic st…
This note reviews some of the recent progresses in the study of high temperature superconductivity in the interface between a single unit cell FeSe and SrTiO$_3$. It offers the author's personal view of why $T_c$ is high and how to further increase it.
Superconducting epitaxial FeSe0.5Te0.5 thin films were prepared on SrTiO3 (001) substrates by pulsed laser deposition. The high purity of the phase, the quality of the growth and the epitaxy were studied with different experimental techniques: X-rays diffraction, reflection high energy electron diffraction, scanning tunnelling microscopy and atomic force microscopy. The substrate temperature during the deposition was found to be the main parameter governing sample morphology and superconducting critical temperature. Films obtained in the optimal conditions show an epitaxial growth with c axis …
The latest discovery of possible high temperature superconductivity in the single-layer FeSe film grown on a SrTiO3 substrate, together with the observation of its unique electronic structure and nodeless superconducting gap, has generated much attention. Initial work also found that, while the single-layer FeSe/SrTiO3 film exhibits a clear signature of superconductivity, the double-layer FeSe/SrTiO3 film shows an insulating behavior. Such a dramatic difference between the single-layer and double-layer FeSe/SrTiO3 films is surprising and the underlying origin remains unclear. Here we report ou…
The de Gennes extrapolation length is a direction dependent measure of the spatial evolution of the pairing gap near the boundary of a superconductor, and thus provides a viable means to probe its symmetry. It is expected to be infinite and isotropic for plain s-wave pairing, and finite and anisotropic for d-wave. Here, we synthesize single layer FeSe films on SrTiO3(001) (STO) substrates by molecular beam epitaxy, and measure the de Gennes extrapolation length by scanning tunneling microscopy/spectroscopy. We find a 40% reduction of the superconducting gap near specular [110]Fe edges, yieldin…
We study the temperature evolution of the quasiparticle bands of the FeSe monolayer on the SrTiO$_3$ (STO) substrate from 10 to 300 K by applying the anisotropic, multiband and full-bandwidth Eliashberg theory. To achieve this, we extend this theory by self-consistently coupling the chemical potential to the full set of Eliashberg equations. In this way, the electron filling can accurately be kept at a constant level at any temperature. Solving the coupled equations self-consistently, and with focus on the interfacial electron-phonon coupling, we compute a nearly constant Fermi surface with re…
We study the electron-phonon coupling strength near the interface of monolayer and bilayer FeSe thin films on SrTiO$_3$, BaTiO$_3$, and oxygen-vacant SrTiO$_3$ substrates, using ab initio methods. The calculated total electron-phonon coupling strength $λ=0.2\text{--}0.3$ cannot account for the high $T_c\sim 70$ K observed in these systems through the conventional phonon-mediated pairing mechanism. In all of these systems, however, we find that the coupling constant of a polar oxygen branch peaks at $\mathbf{q}=0$ with negligible coupling elsewhere, while the energy of this mode coincides with …
By the first-principles electronic structure calculations, we have studied electronic structures of FeSe monolayer and bilayer thin films on SrTiO$_3$ (001) with SrO-termination or TiO$_2$ termination. We find that both FeSe monolayer and bilayer on either termination behave like a slightly doped semiconductor and a collinear antiferromagnetic order on Fe ions. There is no substantial charge transfer between the FeSe layers and the substrate. FeSe is adhered to the SrTiO$_3$ surface by a dipole-dipole interaction. The Fermi surface is mainly the contribution of Fe-3d orbitals. A valence band c…
The effects of electron doping and phonon vibrations on the magnetic properties of monolayer and bilayer FeSe epitaxial films on SrTiO$_3$ have been studied, respectively, using first-principles calculations with van der Waals correction. For monolayer FeSe epitaxial film, the combined effect of electron doping and phonon vibrations readily leads to magnetic frustration between the collinear antiferromagnetic state and the checkerboard antiferromagnetic Néel state. For bilayer FeSe epitaxial film, such magnetic frustration is much more easily induced by electron doping in its bottom layer than…
The accurate theoretical description of the underlying electronic structures is essential for understanding the superconducting mechanism of iron-based superconductors. Compared to bulk FeSe, the superconducting single-layer FeSe/SrTiO3 films exhibit a distinct electronic structure consisting of only electron Fermi pockets, due to the formation of a new band gap at the Brillouin zone (BZ) corners and an indirect band gap between the BZ center and corners. Although intensive studies have been carried out, the origin of such a distinct electronic structure and its connection to bulk FeSe remain …
We have studied the effect of tensile strain on the superconductivity in FeSe films. 50 nm, 100 nm, and 200 nm FeSe films were grown on MgO, SrTiO$_3$, and LaAlO$_3$ substrates by using a pulsed laser deposition technique. X-ray diffraction analysis showed that the tetragonal phase is dominant in all of our FeSe films. The 50 nm FeSe films on MgO and SrTiO$_3$ are under tensile strain, while the 50 nm FeSe film on LaAlO$_3$ and the other thick FeSe films are unstrained. Superconducting transitions have been observed in unstrained FeSe films with T$_{onset}$ $\approx$ 8 K, which is close to the…
Cryogenic scanning tunneling microscopy is employed to investigate the stoichiometry and defects of epitaxial FeSe thin films on SrTiO3(001) substrates under various post-growth annealing conditions. Low-temperature annealing with an excess supply of Se leads to formation of Fe vacancies and superstructures, accompanied by a superconductivity (metal)-to-insulator transition in FeSe films. By contrast, high-temperature annealing could eliminate the Fe vacancies and superstructures, and thus recover the high-temperature superconducting phase of monolayer FeSe films. We also observe multilayer Fe…
The monolayer FeSe with a thickness of one unit cell grown on a single-crystal SrTiO$_{3}$ substrate (FeSe/STO) exhibits striking high-temperature superconductivity with transition temperature $T_{c}$ over 65K reported by recent experimental measurements. In this work, through analyzing the distinctive electronic structure, and providing systematic classification of the pairing symmetry , we find that both $s$-and $p$-wave pairing with odd parity give rise to topological superconducting states in monolayer FeSe, and the exotic properties of $s$-wave topological superconducting states have clos…
The discovery of high temperature superconductivity in FeSe films on SrTiO3 substrate has inspired great experimental and theoretical interests. First-principles density functional theory calculations, which have played an important role in the study of bulk iron-based superconductors, also participate in the investigation of interfacial superconductivity. In this article, we review the calculation results on the electronic and magnetic structures of FeSe epitaxial films, emphasizing on the interplay between different degrees of freedom, such as charge, spin, and lattice vibrations. Furthermor…
Superconductivity is significantly enhanced in monolayer FeSe grown on SrTiO3, but not for multilayer films, in which large strength of nematicity develops. However, the link between the high-transition temperature superconductivity in monolayer and the correlation related nematicity in multilayer FeSe films is not well understood. Here, we use low-temperature scanning tunneling microscopy to study few-layer FeSe thin films grown by molecular beam epitaxy. We observe an incommensurate long-range smectic phase, which solely appears in bilayer FeSe films. The smectic order still locally exists a…
Monolayer FeSe grown on SrTiO$_3$ provides a new playground for high-Tc superconductivity. A recent study shows the importance of stripy instability for superconductivity enhancement in FeSe/SrTiO3. However, it is still under debate whether such a stripe phase is ubiquitously bound to the interfacial superconductivity. Here, we report on molecular beam epitaxy growth and low-temperature scanning tunneling microscopy study of FeSe films on BaTiO$_3$(001). We find that the stripe phase is more prominent in FeSe/BaTiO$_3$. Long-range stripes exist in bilayer and triple-layer FeSe films at 4 K and…
The observation of substantially enhanced superconductivity of single-layer FeSe films on SrTiO3 has stimulated intensive research interest. At present, conclusive experimental data on the corresponding electron-boson interaction is still missing. Here we use inelastic electron scattering spectroscopy and angle resolved photoemission spectroscopy to show that the electrons in these systems are dressed by the strongly polarized lattice distortions of the SrTiO3, and the indispensable non-adiabatic nature of such a coupling leads to the formation of dynamic interfacial polarons. Furthermore, the…
In a recent experiment the superconducting gap of a single unit cell thick FeSe film on SrTiO$_3$ substrate is observed by scanning tunneling spectroscopy and angle-resolved photoemission spectroscopy. The value of the superconducting gap is much larger than that of the bulk FeSe under ambient pressure. In this paper we study the effects of screening due to the ferroelectric phonons on Cooper pairing. We conclude it can significantly enhance the energy scale of Cooper pairing and even change the pairing symmetry. Our results also raise some concerns on whether phonons can be completely ignored…
The enhanced superconductivity in monolayer FeSe on titanates opens a fascinating pathway towards the rational design of high-temperature superconductors. Utilizing the state-of-the-art oxide plus chalcogenide molecular beam epitaxy systems in situ connected to a synchrotron angle-resolved photoemission spectroscope, epitaxial LaTiO3 layers with varied atomic thicknesses are inserted between monolayer FeSe and SrTiO3, for systematic modulation of interfacial chemical potential.With the dramatic increase of electron accumulation at the LaTiO3-SrTiO3 surface, providing a substantial surge of wor…
Monolayer FeSe films grown on SrTiO3 (STO) substrate show superconducting gap-opening temperatures (Tc) which are almost an order of magnitude higher than those of the bulk FeSe and are highest among all known Fe-based superconductors. Angle-resolved photoemission spectroscopy (ARPES) observed "replica bands" suggesting the importance of the interaction between FeSe electrons and STO phonons. These facts rejuvenated the quest for Tc enhancement mechanisms in iron-based, especially iron-chalcogenide, superconductors. Here, we perform the first numerically-exact sign-problem-free quantum Monte C…
The recent observation of replica bands in single-layer FeSe/SrTiO$_3$ by angle-resolved photoemission spectroscopy (ARPES) has triggered intense discussions concerning the potential influence of the FeSe electrons coupling with substrate phonons on the superconducting transition temperature. Here we provide strong evidence that the replica bands observed in the single-layer FeSe/SrTiO$_3$ system and several other cases are largely due to the energy loss processes of the escaping photoelectron, resulted from the well-known strong coupling of external propagating electrons to Fuchs-Kliewer (F-K…
Interface enhanced superconductivity at two dimensional limit has become one of most intriguing research directions in condensed matter physics. Here, we report the superconducting properties of ultra-thin FeSe films with the thickness of one unit cell (1-UC) grown on conductive and insulating SrTiO3 (STO) substrates. For the 1-UC FeSe on conductive STO substrate (Nb-STO), the magnetization versus temperature (M-T) measurement shows a diamagnetic signal at 85 K, suggesting the possibility of superconductivity appears at this high temperature. For the FeSe films on insulating STO substrate, sys…
