This letter investigates physical layer security in intelligent reflecting surface (IRS)-aided visible light communication (VLC). Under the point source assumption, we first elaborate the system model in the scenario with multiple legitimate users and one eavesdropper, where the secrecy rate maximization problem is transformed into an assignment problem by objective function approximation. Then, an iterative Kuhn-Munkres algorithm is proposed to optimize the transformed problem, and its computational complexity is in the second-order form of the numbers of IRS units and transmitters. Moreover, numerical simulations are carried out to verify the approximation performance and the VLC secrecy rate improvement by IRS.
Although the multi-antenna or so-called multiple-input multiple-output (MIMO) transmission has been the enabling technology for the past generations of radio-frequency (RF)-based wireless communication systems, its application to the visible light communication (VLC) still faces a critical challenge as the MIMO spatial multiplexing gain can be hardly attained in VLC channels due to their strong spatial correlation. In this paper, we tackle this problem by deploying the optical intelligent reflecting surface (OIRS) in the environment to boost the capacity of MIMO VLC. Firstly, based on the extr…
The rise of intelligent reflecting surfaces (IRSs) is opening the door for unprecedented capabilities in visible light communication (VLC) systems. By controlling light propagation in indoor environments, it is possible to manipulate the channel conditions to achieve specific key performance indicators. In this paper, we investigate the role that IRSs can play in boosting the secrecy capacity of non-orthogonal multiple access (NOMA) VLC systems. More specifically, we propose an IRS-based physical layer security (PLS) mechanism that mitigates the information leakage risk inherent in NOMA. Our r…
There is a paucity of random access protocols designed for alleviating collisions in visible light communication (VLC) systems, where carrier sensing is hard to be achieved due to the directionality of light. To resolve the problem of collisions, we adopt the successive interference cancellation (SIC) algorithm to enable the coordinator to simultaneously communicate with multiple devices, which is referred to as the multi-packet reception (MPR) capability. However, the MPR capability could be fully utilized only when random access algorithms are properly designed. Considering the characteristi…
In this paper, we focus on the optimal beamformer design for rate splitting multiple access (RSMA)-aided multipleinput single-output (MISO) visible light communication (VLC) networks. First, we derive the closed-form lower bounds of the achievable rate of each user, which are the first theoretical bound of achievable rate for RSMA-aided VLC networks. Second, we investigate the optimal beamformer design for RSMA-aided VLC networks to maximize the sum rate under the optical and electrical power constraints. In addition, we show that the proposed RSMA-aided networks can achieve superior performan…
With the capability of reconfiguring the wireless electromagnetic environment, intelligent reflecting surface (IRS) is a new paradigm for designing future wireless communication systems. In this paper, we consider optical IRS for improving the performance of visible light communication (VLC) under a multiple-input and multiple-output (MIMO) setting. Specifically, we focus on the downlink communication of an indoor MIMO VLC system and aim to minimize the mean square error (MSE) of demodulated signals at the receiver. To this end, the MIMO channel gain of the IRS-aided VLC is first derived under…
Intelligent reflecting surfaces (IRS) can improve the physical layer security (PLS) by providing a controllable wireless environment. In this paper, we propose a novel PLS technique with the help of IRS implemented by an intelligent mirror array for the visible light communication (VLC) system. First, for the IRS aided VLC system containing an access point (AP), a legitimate user and an eavesdropper, the IRS channel gain and a lower bound of the achievable secrecy rate are derived. Further, to enhance the IRS channel gain of the legitimate user while restricting the IRS channel gain of the eav…
University of Strathclyde（思克莱德大学）；Ericsson AB（爱立信公司）；Ericsson Silicon Valley（爱立信硅谷）
The emerging intelligent reflecting surface (IRS) technology introduces the potential of controlled light propagation in visible light communication (VLC) systems. This concept opens the door for new applications in which the channel itself can be altered to achieve specific key performance indicators. In this paper, for the first time in the open literature, we investigate the role that IRSs can play in enhancing the link reliability in VLC systems employing non-orthogonal multiple access (NOMA). We propose a framework for the joint optimisation of the NOMA and IRS parameters and show that it…
This letter presents a detailed performance analysis of the intelligent reflecting surface (IRS) aided single-input single-output communication systems, taking into account of the direct link between the transmitter and receiver. A closed-form upper bound is derived for the ergodic capacity, and an accurate approximation is obtained for the outage probability. In addition, simplified expressions are presented in the asymptotic regime. Numerical results are provided to validate the correctness of the theoretical analysis. It is found that increasing the number of reflecting elements can signifi…
Intelligent Reflecting Surface (IRS) has been recently proposed as a promising solution to enhance the spectral and energy efficiency of future wireless networks by tuning a massive number of low-cost passive reflecting elements and thereby constructing favorable wireless propagation environment. Different from the prior works that focus on link-level performance optimization for IRS-aided wireless systems, this letter characterizes the spatial throughput of a single-cell multiuser system aided by multiple IRSs that are randomly deployed in the cell. It is shown by simulation that our analysis…
This letter investigates the joint active and passive beamforming optimization for intelligent reflecting surface (IRS) aided multiuser multiple-input multiple-output systems with the objective of maximizing the weighted sum-rate. We show that this problem can be solved via a matrix weighted mean square error minimization equivalence. In particular, for the optimization of the passive IRS beamforming, we first propose an iterative algorithm with excellent performance based on the manifold optimization. By using the matrix fractional programming technique to obtain a more tractable object funct…
Reconfigurable intelligent surface (RIS) provides a promising way to build the programmable wireless transmission environments in the future. Owing to the large number of reflecting elements used at the RIS, joint optimization for the active beamforming at the transmitter and the passive reflector at the RIS is usually complicated and time-consuming. To address this problem, this paper proposes a low-complexity joint beamforming and reflecting algorithm based on fractional programing (FP). Specifically, we first consider a RIS-aided multi-user communication system with perfect channel state in…
Non-Uniform Codebook Design for Optical IRS-Assisted VLC Systems
Aristotle University of Thessaloniki（色雷斯大学）；University of Ioannina（约阿尼纳大学）；FORTH（希腊研究基金会）；James Watt School of Engineering, University of Glasgow（格拉斯哥大学詹姆斯·瓦特工程学院）
The intelligent reflecting surface (IRS) is an emerging technique to extend the wireless coverage. In this letter, the performance of hybrid automatic repeat request (hybrid-ARQ) for an IRS-assisted system is analyzed. More specifically, the outage performance of the IRS-aided system using hybrid-ARQ protocol with chase combining is studied. Asymptotic analysis also shows that the outage performance improves better than linearly by increasing number of reflectors of the IRS-aided system. The results also verify the potential of combining the ARQ scheme in the link layer of the IRS-aided system…
In this paper, we study the performance of wideband terahertz (THz) communications assisted by an intelligent reflecting surface (IRS). Specifically, we first introduce a generalized channel model that is suitable for electrically large THz IRSs operating in the near-field. Unlike prior works, our channel model takes into account the spherical wavefront of the emitted electromagnetic waves and the spatial-wideband effect. We next show that conventional frequency-flat beamfocusing significantly reduces the power gain due to beam squint, and hence is highly suboptimal. More importantly, we analy…
Reducing computational complexity is crucial in optimizing the phase shifts of Intelligent Reflecting Surface (IRS) systems since IRS-assisted communication systems are generally deployed with a large number of reflecting elements (REs). This letter proposes a low-complexity algorithm, designated as Dimension-wise Sinusoidal Maximization (DSM), to obtain the optimal IRS phase shifts that maximize the sum capacity of a MIMO network. The algorithm exploits the fact that the objective function for the optimization problem is sinusoidal w.r.t. the phase shift of each RE. The numerical results show…
Intelligent reflecting surface (IRS) is a new promising technology that is able to manipulate the wireless propagation channel via smart and controllable signal reflection. In this paper, we investigate the capacity region of a multiple access channel (MAC) with two users sending independent messages to an access point (AP), aided by $M$ IRS reflecting elements. We consider two practical IRS deployment strategies that lead to different user-AP effective channels, namely, the distributed deployment where the $M$ reflecting elements form two IRSs, each deployed in the vicinity of one user, versu…
Intelligent reflecting surface (IRS) is a novel burgeoning concept, which possesses advantages in enhancing wireless communication and user localization, while maintaining low hardware cost and energy consumption. Herein, we establish an IRS-aided mmWave-MIMO based joint localization and communication system (IMM-JLCS), and probe into its performance evaluation and optimization design. Specifically, first, we provide the signal, channel and estimation error models, and contrive the working process of the IMM-JLCS in detail. Then, by configuring appropriate IRS phase shifts, we derive the close…
This paper investigates the achievable rate region of the multiple-input single-output (MISO) interference channel aided by intelligent reflecting surfaces (IRSs). We exploit the the additional design degree of freedom provided by the coordinated IRSs to enhance the desired signal and suppress interference so as to enlarge the achievable rate region of the interference channel. To this end, we jointly optimize the active transmit beamforming at the transmitters and passive reflective beamforming at the IRSs, subject to the constant modulus constraints of reflective beamforming vectors. To addr…
In intelligent reflecting surface (IRS) aided wireless communication systems, channel state information (CSI) is crucial to achieve its promising passive beamforming gains. However, CSI errors are inevitable in practice and generally correlated over the IRS reflecting elements due to the limited training with discrete phase shifts, which degrade the data transmission rate and reliability. In this paper, we focus on investigating the effect of CSI errors to the outage performance in an IRS-aided multiuser downlink communication system. Specifically, we aim to jointly optimize the active transmi…
This paper proposes a novel location information aided multiple intelligent reflecting surface (IRS) systems. Assuming imperfect user location information, the effective angles from the IRS to the users are estimated, which is then used to design the transmit beam and IRS beam. Furthermore, closed-form expressions for the achievable rate are derived. The analytical findings indicate that the achievable rate can be improved by increasing the number of base station (BS) antennas or reflecting elements. Specifically, a power gain of order $N M^2$ is achieved, where $N$ is the antenna number and $…
Intelligent reflecting surface (IRS) is an emerging technology that is able to significantly improve the performance of wireless communications, by smartly tuning signal reflections at a large number of passive reflecting elements. On the other hand, with ubiquitous wireless devices and ambient radio-frequency signals, wireless sensing has become a promising new application for the next-generation/6G wireless networks. By synergizing low-cost IRS and fertile wireless sensing applications, this article proposes a new IRS-aided sensing paradigm for enhancing the performance of wireless sensing c…
Reconfigurable Intelligent Surface (RIS) is a promising solution to reconfigure the wireless environment in a controllable way. To compensate for the double-fading attenuation in the RIS-aided link, a large number of passive reflecting elements (REs) are conventionally deployed at the RIS, resulting in large surface size and considerable circuit power consumption. In this paper, we propose a new type of RIS, called active RIS, where each RE is assisted by active loads (negative resistance), that reflect and amplify the incident signal instead of only reflecting it with the adjustable phase shi…
In this letter, we study the secure communication problem in the unmanned aerial vehicle (UAV) enabled networks aided by an intelligent reflecting surface (IRS) from the physical-layer security perspective. Specifically, the IRS is deployed to assist the wireless transmission from the UAV to the ground user in the presence of an eavesdropper. The objective of this work is to maximize the secrecy rate by jointly optimizing the phase shifts at the IRS as well as the transmit power and location of the UAV. However, the formulated problem is difficult to solve directly due to the non-linear and no…
Intelligent reflecting surface (IRS) is a promising technology for achieving spectrum and energy efficient wireless networks cost-effectively. Most existing works on IRS have focused on exploiting IRS to enhance the performance of wireless communication or wireless information transmission (WIT), while its potential for boosting the efficiency of radio-frequency (RF) wireless energy transmission (WET) still remains largely open. Although IRS-aided WET shares similar characteristics with IRS-aided WIT, they differ fundamentally in terms of design objective, receiver architecture, and practical …
Intelligent reflecting surface (IRS) has the potential to significantly enhance the network performance by reconfiguring the wireless propagation environments. It is however difficult to obtain the accurate downlink channel state information (CSI) for efficient beamforming design in IRS-aided wireless networks. In this article, we consider an IRS-aided downlink multiple-input single-output (MISO) network, where the base station (BS) is not required to know the underlying channel distribution. We formulate an outage probability minimization problem by jointly optimizing the beamforming vector a…
In this letter, we study a rate-splitting multiple access (RSMA)-based intelligent reflecting surface (IRS)-aided multi-user multiple-input single-output (MISO) secure communication system with a potential eavesdropper (Eve). Aiming to maximize the minimum secrecy rate (SR) among all the legitimate users (LUs), a design problem for jointly optimizing the transmit beamforming with artificial noise (AN), the IRS beamforming, and the secrecy common rate allocation is formulated. Since the design problem is highly non-convex with coupled optimization variables, we develop a computationally efficie…
As communication systems that employ millimeter wave (mmWave) frequency bands must use large antenna arrays to overcome the severe propagation loss of mmWave signals, hybrid beamforming has been considered as an integral component of mmWave communications. Recently, intelligent reflecting surface (IRS) has been proposed as an innovative technology that can significantly improve the performance of mmWave communication systems through the use of low-cost passive reflecting elements. In this paper, we study IRS-aided mmWave multiple-input multiple-output (MIMO) systems with hybrid beamforming arc…
This paper considers an active intelligent reflecting surface (IRS)-aided wireless powered communication network (WPCN), where devices first harvest energy and then transmit information to a hybrid access point (HAP). Different from the existing works on passive IRS-aided WPCNs, this is the first work that introduces the active IRS in WPCNs. To guarantee fairness, the problem is formulated as an amplifying power-limited weighted sum throughput (WST) maximization problem, which is solved by successive convex approximation technique and fractional programming alternatively. To balance the perfor…
In reconfigurable intelligent surfaces (RISs) aided communications, the existing passive beamforming (PB) design involves polynomial complexity in the number of reflecting elements, and thus is difficult to implement due to a massive number of reflecting elements. To overcome this difficulty, we propose a reflection-angle-based cascaded channel model by adopting the generalized Snell's law, in which the dimension of the variable space involved in optimization is significantly reduced, resulting in a simplified hierarchical passive beamforming (HPB) design. We develop an efficient two-stage HPB…
The low efficiency of far-field wireless power transfer (WPT) limits the fundamental rate-energy (R-E) performance trade-off of the simultaneous wireless information and power transfer (SWIPT) system. To address this challenge, we propose in this letter a new SWIPT system aided by the emerging intelligent reflecting surface (IRS) technology. By leveraging massive low-cost passive elements that are able to reflect the signals with adjustable phase shifts, IRS achieve a high passive beamforming gain, which is appealing for drastically enhancing the WPT efficiency and thereby the R-E trade-off of…
In this paper, the novel simultaneously transmitting and reflecting (STAR) reconfigurable intelligent surface (RIS), which enables full-space coverage on users located on both sides of the surface, is investigated in the multi-user mobile edge computing (MEC) system. A computation rate maximization problem is formulated via the joint design of the STAR-RIS phase shifts, reflection and transmission amplitude coefficients, the receive beamforming vectors at the access point, and the users' energy partition strategies for local computing and offloading. Two operating protocols of STAR-RIS, namely…
Intelligent reflecting surface (IRS) is envisioned to play a significant role in future wireless communication systems as an effective means of reconfiguring the radio signal propagation environment. In this paper, we study a new multi-IRS aided massive multiple-input multiple-output (MIMO) system, where a multi-antenna BS transmits independent messages to a set of remote single-antenna users using orthogonal beams that are subsequently reflected by different groups of IRSs via their respective multi-hop passive beamforming over pairwise line-of-sight (LoS) links. We aim to select optimal IRSs…
This paper considers a two-user downlink transmission in intelligent reflecting surface (IRS) aided network over fading channels. Particularly, non-orthogonal multiple access (NOMA) and two orthogonal multiple access (OMA) schemes, namely, time division multiple access (TDMA) and frequency division multiple access (FDMA), are studied. The objective is to maximize the system average sum rate for the delay-tolerant transmission. We propose two adjustment schemes, namely, dynamic phase adjustment and one-time phase adjustment. The power budget, minimum average data rate, and discrete unit modulus…
This paper proposes a novel framework of resource allocation in intelligent reflecting surface (IRS) aided multi-cell non-orthogonal multiple access (NOMA) networks, where a sum-rate maximization problem is formulated. To address this challenging mixed-integer non-linear problem, we decompose it into an optimization problem (P1) with continuous variables and a matching problem (P2) with integer variables. For the non-convex optimization problem (P1), iterative algorithms are proposed for allocating transmit power, designing reflection matrix, and determining decoding order by invoking relaxati…
University of Macau（澳门大学）；National University of Singapore（新加坡国立大学）
Intelligent reflecting surface (IRS) is an enabling technology to engineer the radio signal prorogation in wireless networks. By smartly tuning the signal reflection via a large number of low-cost passive reflecting elements, IRS is capable of dynamically altering wireless channels to enhance the communication performance. It is thus expected that the new IRS-aided hybrid wireless network comprising both active and passive components will be highly promising to achieve a sustainable capacity growth cost-effectively in the future. Despite its great potential, IRS faces new challenges to be effi…
The performance of a device-to-device (D2D) underlay communication system is limited by the co-channel interference between cellular users (CUs) and D2D devices. To address this challenge, an intelligent reflecting surface (IRS) aided D2D underlay system is studied in this paper. A two-timescale optimization scheme is proposed to reduce the required channel training and feedback overhead, where transmit beamforming at the base station (BS) and power control at the D2D transmitter are adapted to instantaneous effective channel state information (CSI); and the IRS phase shifts are adapted to slo…
The novel concept of simultaneously transmitting and reflecting (STAR) reconfigurable intelligent surfaces (RISs) is investigated, where the incident wireless signal is divided into transmitted and reflected signals passing into both sides of the space surrounding the surface, thus facilitating a full-space manipulation of signal propagation. Based on the introduced basic signal model of `STAR', three practical operating protocols for STAR-RISs are proposed, namely energy splitting (ES), mode switching (MS), and time switching (TS). Moreover, a STAR-RIS aided downlink communication system is c…
We consider in this paper a new intelligent reflecting surface (IRS)-aided LEO satellite communication system, by utilizing the controllable phase shifts of massive passive reflecting elements to achieve flexible beamforming, which copes with the time-varying channel between the high-mobility satellite (SAT) and ground node (GN) cost-effectively. In particular, we propose a new architecture for IRS-aided LEO satellite communication where IRSs are deployed at both sides of the SAT and GN, and study their cooperative passive beamforming (CPB) design over line-of-sight (LoS)-dominant single-refle…
In this letter, we consider an intelligent reflecting surface (IRS)-aided wireless relaying system, where a decode-and-forward relay (R) is employed to forward data from a source (S) to a destination (D), aided by M passive reflecting elements. We consider two practical IRS deployment strategies, namely, single-IRS deployment where all reflecting elements are mounted on one single IRS that is deployed near S, R, or D, and multi-IRS deployment where the reflecting elements are allocated over three separate IRSs which are deployed near S, R, and D, respectively. Under the line-of-sight (LoS) cha…
In this letter, we consider an intelligent reflecting surface (IRS)-aided wireless communication system, where an active or passive IRS is employed to assist the communication between an access point and a user. First, we consider the downlink/uplink communication separately and optimize the IRS placement for rate maximization with an active or passive IRS. We show that the active IRS should be deployed closer to the receiver with the IRS's decreasing amplification power; while in contrast, the passive IRS should be deployed near either the transmitter or receiver. Moreover, with optimized IRS…
As a recently proposed idea for future wireless systems, intelligent reflecting surface (IRS) can assist communications between entities which do not have high-quality direct channels in between. Specifically, an IRS comprises many low-cost passive elements, each of which reflects the incident signal by incurring a phase change so that the reflected signals add coherently at the receiver. In this paper, for an IRS-aided wireless network, we study the problem of power control at the base station (BS) for physical-layer broadcasting under quality of service (QoS) constraints at mobile users, by …
It is known that the capacity of the intelligent reflecting surface (IRS) aided cellular network can be effectively improved by reflecting the incident signals from the transmitter in a low-cost passive reflecting way. Nevertheless, in the actual network operation, the base station (BS) and IRS may belong to different operators, consequently, the IRS is reluctant to help the BS without any payment. Therefore, this paper investigates price-based reflection resource (elements) allocation strategies for an IRS-aided multiuser multiple-input and single-output (MISO) downlink communication systems,…
This work studies the modelling and the optimization of intelligent reflecting surface (IRS) assisted multiple-input multiple-output (MIMO) systems through cascaded line-of-sight (LoS) links. In Part I of this work, we build up a new IRS-aided MIMO channel model, named the cascaded LoS MIMO channel. The proposed channel model consists of a transmitter (Tx) and a receiver (Rx) both equipped with uniform linear arrays, and an IRS is used to enable communications between the transmitter and the receiver through the LoS links seen by the IRS. When modeling the reflection of electromagnetic waves a…
