The van der Waals layered material CuInP2S6 features interesting functional behavior, including the existence of four uniaxial polarization states, polarization reversal against the electric field through Cu ion migration, a negative-capacitance regime, and reversible extraction of Cu ions. At the heart of these characteristics lies the high mobility of Cu ions, which also determines the spontaneous polarization. Therefore, Cu migration across the lattice results in unusual ferroelectric behavior. Here, we demonstrate how the interplay of polar and ionic properties provides a path to ionically controlled ferroelectric behavior, achieved by applying selected DC voltage pulses and subsequently probing ferroelectric switching during fast triangular voltage sweeps. Using current measurements and theoretical calculations, we observe that increasing DC pulse duration results in higher ionic currents, the build-up of an internal electric field that shifts polarization loops, and an increase in total switchable polarization by ~50% due to the existence of a high polarization phase which is stabilized by the internal electric field. Apart from tuning ferroelectric behavior by selected square pulses, hysteretic polarization switching can even be entirely deactivated and reactivated, resulting in three-state systems where polarization switching is either inhibited or can be performed in two different directions.
The atomic-scale synthesis of artificial oxide heterostructures offers new opportunities to create novel states that do not occur in nature. The main challenge related to synthesizing these structures is obtaining atomically sharp interfaces with designed termination sequences. Here, we demonstrate that the oxygen pressure (PO2) during growth plays an important role in controlling the interfacial terminations of SrRuO3/BaTiO3/SrRuO3 (SRO/BTO/SRO) ferroelectric capacitors. The SRO/BTO/SRO heterostructures were grown by the pulsed laser deposition (PLD) method. The top SRO/BTO interface grown at…
Ferroelectricity enables key integrated technologies from non-volatile memory to precision ultrasound. Wurtzite ferroelectric Al1-xScxN has recently attracted attention because of its robust ferroelectricity and Si process compatibility in addition to being the first known ferroelectric wurtzite. However, the origin and control of ferroelectricity in wurtzite materials is not yet fully understood. Here we show that the local bond ionicity, rather than simply the change in tetrahedral distortion, is key to controlling the macroscopic ferroelectric response, according to our coupled experimental…
Alternative origins of polarity in compressively strained SrTiO3-RENiO3 capacitors
University College London（伦敦大学学院）；London Centre for Nanotechnology（伦敦纳米技术中心）；Instituto de Nanociencia y Materiales de Aragón (INMA), CSIC-Universidad de Zaragoza（阿拉贡纳米科学与材料研究所（INMA），西班牙科学研究中心-萨拉戈萨大学）；Departamento de Física de la Materia Condensada, Universidad de Zaragoza（萨拉戈萨大学凝聚态物理系）；Condensed Matter Physics, Physics Department, Durham University（杜伦大学物理系凝聚态物理）；Smart Materials Unit, Luxembourg Institute of Science and Technology (LIST)（卢森堡科学与技术研究所（LIST）智能材料部门）；Department of Physics and Materials Science, University of Luxembourg（卢森堡大学物理与材料科学系）；Departamento de Ciencia y Tecnologia de Materiales y Fluidos, Universidad de Zaragoza（萨拉戈萨大学材料与流体科学技术系）
In this study, we propose a measurement technique for evaluating ferroelectric polarization characteristics in ferroelectric field-effect transistors (FeFETs). Different from standard metal/ferroelectric/metal capacitors, the depletion and inversion phenomena in semiconductor substrates have to be carefully taken into account when evaluating the ferroelectric properties using fast voltage sweep as input. The non-equilibrium deep depletion is found to be the limiting factor for the accurate evaluation of ferroelectric properties in metal/ferroelectric/semiconductor capacitors. By connecting the…
Zirconia and hafnia based thin films have attracted tremendous attention in the last decade due to their unexpected ferroelectric behavior at the nanoscale, which facilitates the downscaling of ferroelectric devices. The present work reports a novel ferroelectric rhombohedral phase of ZrO2 that can be achieved in thin films grown on (111)- Nb:SrTiO3 substrates by ion-beam sputtering. Structural and ferroelectric characterizations reveal that the (111)-oriented ZrO2 films are under epitaxial compressive strain and display a switchable ferroelectric polarization of about 20.2 μC/cm2 with a coerc…
Ferroelectricity in binary oxides including hafnia and zirconia have riveted the attention of the scientific community due to highly unconventional physical mechanisms and the potential for integration of these materials into semiconductor workflows. Over the last decade, it has been argued that behaviors such as wake-up phenomena and an extreme sensitivity to electrode and processing conditions suggests that ferroelectricity in these materials is strongly coupled with additional mechanisms, with possible candidates including the ionic subsystem or strain. Here we argue that the properties of …
Ferroelectricity occurs in crystals with broken spatial inversion symmetry. In conventional perovskite oxides, concerted ionic displacements within a three-dimensional network of transition metal-oxygen polyhedra (MOx) manifest spontaneous polarization. Meanwhile, some two-dimensional networks of MOx can foster geometric ferroelectricity with magnetism, owing to the distortion of the polyhedra. Because of the fundamentally different mechanism of ferroelectricity in a two-dimensional network, one can further challenge an uncharted mechanism of ferroelectricity in a one-dimensional channel of MO…
Ferroelectrics that are also ionic conductors offer possibilities for novel applications with high tunability, especially if the same atomic species causes both phenomena. In particular, at temperatures just below the Curie temperature, polarized states may be sustainable as the mobile species is driven in a controlled way over the energy barrier that governs ionic conduction, resulting in unique control of the polarization. This possibility was recently demonstrated in CuInP2S6, a layered ferroelectric ionic conductor in which Cu ions cause both ferroelectricity and ionic conduction. Here, we…
The interplay between electrochemical surface charges and bulk ferroelectricity in thin films gives rise to a continuum of coupled ferro-ionic states. These states are exquisitely sensitive to chemical and electric conditions at the surfaces, applied voltage, and oxygen pressure. Using the analytical approach combining the Ginzburg-Landau-Devonshire description of the ferroelectricity with Langmuir adsorption isotherm for the ions at the film surface, we have studied the temperature-, time- and field- dependent polarization changes and electromechanical response of the ferro-ionic states. The …
The noncollinear cycloidal magnetic order breaks the inversion symmetry in CaMn$_{7}$O$_{12}$, generating one of the largest spin-orbit driven ferroelectric polarizations measured to date. In this Letter, the microscopic origin of the polarization, including its direction, charge density redistribution, magnetic exchange interactions, and its coupling to the spin helicity, is explored via first principles calculations. The Berry phase computed polarization exhibits almost pure electronic behavior, as the Mn displacements are negligible, $\approx$~0.7~m\textrmÅ. The polarization magnitude and d…
Investigating the Electromechanical Behavior of Unconventionally Ferroelectric $Hf_{0.5}Zr_{0.5}O_{2}$-based Capacitors Through Operando Nanobeam X-ray Diffraction
Ferroelectricity usually fades away when materials are thinned down below a critical value. Employing the first-principles density functional theory and modern theory of polarization, we show that the unique ionic-potential anharmonicity can induce spontaneous in-plane electrical polarizations and ferroelectricity in monolayer group-IV monochalcogenides MX (M=Ge, Sn; X=S, Se). Using Monte Carlo simulations with an effective Hamiltonian extracted from the parameterized energy space, we show these materials exhibit a two-dimensional ferroelectric phase transition that is described by fourth-orde…
This work presents a scalable method to produce robust all-solid electric double layer capacitors (EDLCs), compatible with roll-to-roll processes and structural laminate composite fabrication. It consists in sandwiching and pressing an ionic liquid (IL) based polymer electrolyte membrane between two CNT fiber sheet electrodes at room temperature, and laminating with ordinary plastic film. This fabrication method is demonstrated by assembling large area devices of up to 100 cm2 with electrodes fabricated in-house, as well as with commercial CNT fiber sheets. Free-standing flexible devices opera…
Unconventional ferroelectricity, robust at reduced nanoscale sizes, exhibited by hafnia-based thin-films presents tremendous opportunities in nanoelectronics. However, the exact nature of polarization switching remains controversial. Here, we investigate epitaxial Hf0.5Zr0.5O2 (HZO) capacitors, interfaced with oxygen conducting metals (La0.67Sr0.33MnO3, LSMO) as electrodes, using atomic resolution electron microscopy while in situ electrical biasing. By direct oxygen imaging, we observe reversible oxygen vacancy migration from the bottom to the top electrode through HZO and reveal associated r…
Recent experiments demonstrated robust ferroelectricity in Mg-doped ZnO (ZMO) of the wurtzite structure, hinting at a promising strategy to substantially expand the list of ferroelectrics by doping conventional piezoelectrics. We investigate the origin of ferroelectricity in ZMO with first-principles density functional theory (DFT). The general argument that the Mg alloying could soften the ionic potential energy surface of ZMO for polarization reversal is overly simplified. Our DFT calculations reveal that even at a high Mg concentration, the energy difference ($ΔU$) between the polar and non…
Enhancing the performance of nanoscale ferroelectric (FE) field-effect transistors and FE capacitors for memory devices and logic relies on miniaturizing the metal electrode/ferroelectric area and reducing the thickness of the insulator. Although size reductions improve data retention, deliver lower voltage threshold switching, and increase areal density, they also degrade the functional electric polarization. There is a critical, nanometer length $t_\mathrm{FE}^*$ below which the polarization disappears owing to depolarizing field effects. Here we show how to overcome the critical thickness l…
Electrical energy storage systems (EESSs) with high energy density and power density are essential for the effective miniaturization of future electronic devices. Among different EESSs available in the market, dielectric capacitors relying on swift electronic and ionic polarization-based mechanisms to store and deliver energy already demonstrate high power densities. However, different intrinsic and extrinsic contributions to energy dissipations prevent ceramic-based dielectric capacitors from reaching high recoverable energy density levels. Interestingly, relaxor ferroelectric-based dielectri…
Proximity Ferroelectricity in Compositionally Graded Structures
Frantsevich Institute for Problems in Materials Science, National Academy of Sciences of Ukraine（乌克兰国家科学院弗拉采维奇材料科学问题研究所）；Institute of Physics, National Academy of Sciences of Ukraine（乌克兰国家科学院物理研究所）；University of Tennessee（田纳西大学）；Pennsylvania State University（宾夕法尼亚州立大学）
Ferroelectric materials have remained one of the foci of condensed matter physics and materials science for over 50 years. In the last 20 years, the development of voltage-modulated scanning probe microscopy techniques, exemplified by Piezoresponse force microscopy (PFM) and associated time and voltage spectroscopies, opened a pathway to explore these materials on a single-digit nanometer level. Consequently, domain structures, walls and polarization dynamics can now be imaged in real space. More generally, PFM has allowed studying electromechanical coupling in a broad variety of materials ran…
Ferroelectricity and metallicity are usually believed not to coexist because conducting electrons would screen out static internal electric fields. In 1965, Anderson and Blount proposed the concept of 'ferroelectric metal', however, it is only until recently that very rare ferroelectric metals were reported. Here, by combining high-throughput ab initio calculations and data-driven machine learning method with new electronic orbital based descriptors, we systematically investigated a large family (2,964) of two-dimensional (2D) bimetal phosphates, and discovered 60 stable ferroelectrics with ou…
