In this paper, a diffuse-interface lattice Boltzmann method (DI-LBM) is developed for fluid-particle interaction problems. In this method, the sharp interface between the fluid and solid is replaced by a thin but nonzero thickness transition region named diffuse interface, where the physical variables varies continuously. In order to describe the diffuse interface, we introduce a smooth function, which is similar to the order parameter in phase-field model or the volume fraction of solid phase in the partially saturated lattice Boltzmann method (PS-LBM). In addition, to depict the fluid-particle interaction more accurately, a modified force term is also proposed and included in the evolution equation of the DI-LBM. Some classical problems are used to test the DI-LBM, and the results are in good agreement with some available theoretical and numerical works. Finally, it is also found that the DI-LBM is more efficient and accurate than the PS-LBM with the superposition model.
This paper deals with the numerical modelling of the interaction between a fluid and an incompressible solid (Neo Hookean) in small perturbations with the lattice Boltzmann method (LBM). In order to use a monolithic formulation and to solve the whole problem with the lattice Boltzmann method, an Eulerian approach is employed for the solid medium. The initial problem is thus transformed into a diphasic problem and a unique LBM solver is used for both phases (fluid and solid). With this approach, the force at the fluid-solid interface does not need to be explicitly computed. It is intrinsic to t…
In this paper, we propose a hybrid lattice Boltzmann method (HLBM) for solving fluid-structure interaction problems. The proposed numerical approach is applied to model the flow induced by a vibrating thin lamina submerged in a viscous quiescent fluid. The hydrodynamic force exerted by the fluid on the solid body is described by means of a complex hydrodynamic function, whose real and imaginary parts are determined via parametric analysis. Numerical results are validated by comparison with those from other numerical as well as experimental works available in the literature. The proposed hybrid…
A simplified finite volume lattice Boltzmann method for simulations of fluid flows from laminar to turbulent regime, Part I: Numerical framework and its application to laminar flow simulation
A two-fluid Discrete Boltzmann Model(DBM) for compressible flows based on Ellipsoidal Statistical Bhatnagar-Gross-Krook(ES-BGK) is presented. The model has flexible Prandtl number or specific heat ratio. Mathematically, the model is composed of two coupled Discrete Boltzmann Equations(DBE). Each DBE describes one component of the fluid. Physically, the model is equivalent to a macroscopic fluid model based on Navier-Stokes(NS) equations, and supplemented by a coarse-grained model for thermodynamic non-equilibrium behaviors. To obtain a flexible Prandtl number, a coefficient is introduced in th…
In this paper, two different approaches fluid forces computation approaches are compared in the frame of Volume Penalization - Lattice Boltzmann Method (VP-LBM). The first method, the momentum exchange method, uses the variation of the distribution functions near the fluid solid interface, while the second one, the stress integration method, allows direct integration of fluid forces onto this interface. Applied to the VP-LBM, which consists in penalizing the solid in the LBM, these two methods lead to significantly different results. The tests are performed to study on one hand the lift and dr…
This paper proposes an approach combining the Volume Penalization (VP) and the the Lattice Boltzmann method (LBM) to compute fluid structure interaction involving rigid bodies. The method consists in adding a force term in the LBM formulation, and thus considers the rigid body similar to particular porous media. Using a characteristic function for the solid domain avoids the expensive tracking of the fluid-solid interface employed commonly in LBM to treat FSI problems. The method is applied to three FSI problems and solved using a Graphics Processor Units (GPU) device. The applications focus o…
Significant improvements in the computational performance of the lattice-Boltzmann (LB) model, coded in FORTRAN90, were achieved through application of enhancement techniques. Applied techniques include optimization of array memory layouts, data structure simplification, random number generation outside the simulation thread(s), code parallelization via OpenMP, and intra- and inter-timestep task pipelining. Effectiveness of these optimization techniques was measured on three benchmark problems: (i) transient flow of multiple particles in a Newtonian fluid in a heterogeneous fractured porous do…
We generalize to three dimensions (3D) a recently developed improved multi-component pseudopotential lattice Boltzmann method and analyze its applicability to simulate flows through realistic porous media. The model is validated and characterized via benchmarks, and we investigate its performance by simulating the displacement of immiscible fluids in 3D geometries. Two samples are considered, namely, a pack of spheres obtained numerically, and a Bentheimer sandstone rock sample obtained experimentally. We show that, with this model it is possible to simulate realistic viscosity ratios, to tune…
The simulation of geometrically resolved rigid particles in a fluid relies on coupling algorithms to transfer momentum both ways between the particles and the fluid. In this article, the fluid flow is modeled with a parallel Lattice Boltzmann method using adaptive grid refinement to improve numerical efficiency. The coupling with the particles is realized with the momentum exchange method. When implemented in plain form, instabilities may arise in the coupling when the particles are lighter than the fluid. The algorithm can be stabilized with a virtual mass correction specifically developed fo…
We simulate the two-dimensional fluid flow around National Advisory Committee for Aeronautics (NACA) 0012 airfoil using a hybrid lattice Boltzmann method (HLBM), which combines the standard lattice Boltzmann method with an unstructured finite-volume formulation. The aim of the study is to assess the numerical performances and the robustness of the computational method. To this purpose, after providing a convergence study to estimate the overall accuracy of the method, we analyze the numerical solution for different values of the angle of attack at a Reynolds number equal to $10^3$. Subsequentl…
Three-phase flows through a pore network of Berea sandstone are studied numerically under critical interfacial tension condition. Results show that the relative permeability of each fluid increases as its own saturation increases. The specific interfacial length between wetting and non-wetting fluids monotonously decreases with increasing the saturation of intermediate-wetting fluid, while the other two specific interfacial lengths exhibit a non-monotonous variation. As the wetting (non-wetting) fluid becomes less wetting (non-wetting), the relative permeability of wetting fluid monotonously i…
A lattice Boltzmann method for binary fluids based on mass-conserved quasi-incompressible phase-field theory
在本文中，基于准不可压缩相场模型[J.Shen et al，Comm.Comp.Phys.13，1045（2013）]，提出了用于二元流体的晶格玻尔兹曼方程（LBE）模型。与其他基于不可压相场论的不可压LBE模型相比，准不可压模型具有局部质量守恒的特点。通过一系列数值模拟验证了该模型的有效性，并与不可压LBE模型[H. Liang等人，Phys.Rev.E89，053320（2014）]。结果表明，该模型能准确地跟踪界面，在化学势分布均匀的情况下，准不可压模型和不可压模型的预测结果定性一致，在化学势分布不均匀的情况下，两者的预测结果相差较大。
The dynamics of dry active matter have implications for a diverse collection of biological phenomena spanning a range of length and time scales, such as animal flocking, cell tissue dynamics, and swarming of inserts and bacteria. Uniting these systems are a common set of symmetries and conservation laws, defining dry active fluids as a class of physical system. Many interesting behaviours have been observed at high densities, which remain difficult to simulate due to the computational demand. Here, we show how two-dimensional dry active fluids in a dense regime can be studied using a simple mo…
We provide a Boltzmann-type kinetic description for dilute polymer solutions based on two-fluid theory. This Boltzmann-type description uses a quasi-equilibrium based relaxation mechanism to model collisions between a polymer dumbbell and a solvent molecule. The model reproduces the desired macroscopic equations for the polymer-solvent mixture. The proposed kinetic scheme leads to a numerical algorithm which is along the lines of the lattice Boltzmann method. Finally, the algorithm is applied to describe the evolution of a perturbed Kolmogorov flow profile, whereby we recover the major elastic…
Non-Newtonian fluid flows, especially in three dimensions (3D), arise in numerous settings of interest to physics. Prior studies using the lattice Boltzmann method (LBM) of such flows have so far been limited to mainly to two dimensions and used less robust collision models. In this paper, we develop a new 3D cascaded LBM based on central moments and multiple relaxation times on a three-dimensional, nineteen velocity (D3Q19) lattice for simulation of generalized Newtonian (power law) fluid flows. The relaxation times of the second order moments are varied locally based on the local shear rate …
Fluid-particle systems are very common in many natural processes and engineering applications. However, accurately and efficiently modelling fluid-particle systems with complex particle shapes is still a challenging task. Here, we present a numerical model that combines the advantages of Lattice Boltzmann Method (LBM) in solving complex flow problems and the capability of the recently introduced Metaball Discrete Element Method (MDEM) in handling non-spherical particle shapes. A sharp interface coupling scheme is developed and the numerical instability issues due to the discontinuity of interf…
This article presents a multi-physics methodology for the numerical simulation of physical systems that involve the non-linear interaction of multi-phase reactive fluids and elastoplastic solids, inducing high strain-rates and high deformations. Each state of matter is governed by a single system of non-linear, inhomogeneous partial differential equations, which are solved simultaneously on the same computational grid, and do not require special treatment of immersed boundaries. To this end, the governing equations for solid and reactive multiphase fluid mechanics are written in the same mathe…
Immiscible fluid displacement in porous media occurs in several natural and industrial processes. For example, during petroleum extraction from porous rock reservoirs, water is used to displace oil. In this paper, we investigate primary drainage and imbibition in a heterogeneous porous medium using an improved numerical model based on the multicomponent pseudopotential lattice Boltzmann method. We apply recent developments from the literature and develop new pressure boundary conditions. We show that the proposed model is able to simulate realistic viscosity ratios, and it allows independent t…
