Non-Newtonian fluid flows, especially in three dimensions (3D), arise in numerous settings of interest to physics. Prior studies using the lattice Boltzmann method (LBM) of such flows have so far been limited to mainly to two dimensions and used less robust collision models. In this paper, we develop a new 3D cascaded LBM based on central moments and multiple relaxation times on a three-dimensional, nineteen velocity (D3Q19) lattice for simulation of generalized Newtonian (power law) fluid flows. The relaxation times of the second order moments are varied locally based on the local shear rate and parameterized by the consistency coefficient and the power law index of the nonlinear constitutive relation of the power law fluid. Numerical validation study of the 3D cascaded LBM for various benchmark problems, including the complex 3D non-Newtonian flow in a cubic cavity at different Reynolds numbers and power law index magnitudes encompassing shear thinning and shear thickening fluids, are presented. Furthermore, numerical stability comparisons of the proposed advanced LBM scheme against the LBM based on other collision models, such as the SRT model and MRT model based on raw moments, are made. Numerical results demonstrate the accuracy, second order grid convergence and significant improvements in stability of the 3D cascaded LBM for simulation of 3D non-Newtonian flows of power law fluids.
In this paper, a thermal cascaded lattice Boltzmann method (TCLBM) is developed in combination with the double-distribution-function (DDF) approach. A density distribution function relaxed by the cascaded scheme is employed to solve the flow field, and a total energy distribution function relaxed by the BGK scheme is used to solve temperature field, where two distribution functions are coupled naturally. The forcing terms are incorporated by means of central moments, which is consistent with the previous force scheme [Premnath \emph{et al.}, Phys. Rev. E \textbf{80}, 036702 (2009)] but the der…
In the CLB method, a Bosanquet-type effective viscosity is employed to account for the rarefaction effect on the gas viscosity. To gain accurate simulations and to match the Bosanquet-type effective viscosity, the combined bounce-back/specular-reflection boundary scheme with a modified second-order slip boundary condition is adopted in the CLB method. The present method is applied to study gas flow in a microchannel with periodic boundary condition and gas flow in a long microchannel (the ratio of the length to the height L/H=100) with pressure boundary condition over a wide range of Knudsen n…
In this paper, we give a more pellucid derivation for the cascaded lattice Boltzmann method (CLBM) based on a general multiple-relaxation-time (MRT) frame through defining a shift matrix. When the shift matrix is a unit matrix, the CLBM degrades into an MRT LBM. Based on this, a consistent forcing scheme is developed for the CLBM. The applicability of the non-slip rule, the second-order convergence rate in space and the property of isotropy for the consistent forcing scheme is demonstrated through the simulation of several canonical problems. Several other existing force schemes previously use…
Operator split forcing schemes exploiting a symmetrization principle, i.e. Strang splitting, for cascaded lattice Boltzmann (LB) methods in two- and three-dimensions for fluid flows with impressed local forces are presented. Analogous scheme for the passive scalar transport represented by a convection-diffusion equation with a source term in a novel cascaded LB formulation is also derived. They are based on symmetric applications of the split solutions of the changes on the scalar field/fluid momentum due to the sources/forces over half time steps before and after the collision step. The latte…
Cascaded or central-moment-based lattice Boltzmann method (CLBM) is a relatively recent development in the LBM community, which has better numerical stability and naturally achieves better Galilean invariance for a specified lattice compared with the classical single-relation-time (SRT) LBM. Recently, CLBM has been extended to simulate thermal flows based on the double-distribution-function (DDF) approach [L. Fei \textit{et al.}, Int. J. Heat Mass Transfer 120, 624 (2018)]. In this work, CLBM is further extended to simulate thermal flows involving complex thermal boundary conditions and/or a h…
Significant improvements in the computational performance of the lattice-Boltzmann (LB) model, coded in FORTRAN90, were achieved through application of enhancement techniques. Applied techniques include optimization of array memory layouts, data structure simplification, random number generation outside the simulation thread(s), code parallelization via OpenMP, and intra- and inter-timestep task pipelining. Effectiveness of these optimization techniques was measured on three benchmark problems: (i) transient flow of multiple particles in a Newtonian fluid in a heterogeneous fractured porous do…
Fluid motion driven by thermal effects, such as that due to buoyancy in differentially heated three-dimensional (3D) enclosures, arise in several natural settings and engineering applications. It is represented by the solutions of the Navier-Stokes equations (NSE) in conjunction with the thermal energy transport equation represented as a convection-diffusion equation (CDE) for the temperature field. In this study, we develop new 3D lattice Boltzmann (LB) methods based on central moments and using multiple relaxation times for the three-dimensional, fifteen velocity (D3Q15) lattice, as well as …
A cascaded lattice Boltzmann (LB) approach based on central moments and multiple relaxation times to simulate thermal convective flows, which are driven by buoyancy forces and/or swirling effects, in the cylindrical coordinate system with axial symmetry is presented. In this regard, the dynamics of the axial and radial momentum components along with the pressure are represented by means of the 2D Navier-Stokes equations with geometric mass and momentum source terms in the pseudo Cartesian form, while the evolutions of the azimuthal momentum and the temperature field are each modeled by an adve…
Simulation of multiphase flows require coupled capturing or tracking of the interfaces in conjunction with the solution of fluid motion often occurring at multiple scales. We will present unified cascaded LB methods based on central moments for the solution of the incompressible two-phase flows at high density ratios and for capturing of the interfacial dynamics. Based on a modified continuous Boltzmann equation (MCBE) for two-phase flows, where a kinetic transformation to the distribution function involving the pressure field is introduced to reduce the associated numerical stiffness at high …
Cascaded lattice-Boltzmann method (Cascaded-LBM) employs a new class of collision operators aiming to improve numerical stability. It achieves this and distinguishes from other collision operators, such as in the standard single or multiple relaxation time approaches, by performing relaxation process due to collisions in terms of moments shifted by the local hydrodynamic fluid velocity, i.e. central moments, in an ascending order-by-order at different relaxation rates. In this paper, we propose and derive source terms in the Cascaded-LBM to represent the effect of external or internal forces o…
Cascaded or central-moment-based lattice Boltzmann method (CLBM) proposed in [Geier \textit{et al.}, Phys. Rev. E \textbf{63}, 066705 (2006)] possesses very good numerical stability. However, two constraints exist in three-dimensional (3D) CLBM simulations. Firstly, the conventional implementation for 3D CLBM involves cumbersome operations and requires much higher computational cost compared to the single-relaxation-time (SRT) LBM. Secondly, it is a challenge to accurately incorporate a general force field into the 3D CLBM. In this paper, we present an improved method to implement CLBM in 3D. …
Central moment lattice Boltzmann method (LBM) is one of the more recent developments among the lattice kinetic schemes for computational fluid dynamics. A key element in this approach is the use of central moments to specify collision process and forcing, and thereby naturally maintaining Galilean invariance, an important characteristic of fluid flows. When the different central moments are relaxed at different rates like in a standard multiple relaxation time (MRT) formulation based on raw moments, it is endowed with a number of desirable physical and numerical features. Since the collision o…
This paper presents a 2D/3D Free Surface Lattice Boltzmann Method simulation package called LBfoam for the simulation of foaming processes. The model incorporates the essential physics of foaming phenomena: gas diffusion into nucleated bubbles, bubble dynamics and coalescence, surface tension, the stabilizing disjoining pressure between bubbles, and Newtonian and non-Newtonian rheological models. The software can simulate the growth and interaction of bubbles, and predict final foam structures. The implementation is based on the Palabos library (in C++), which enables large-scale parallel simu…
We propose numerical simulations of viscoelastic fluids based on a hybrid algorithm combining Lattice-Boltzmann models (LBM) and Finite Differences (FD) schemes, the former used to model the macroscopic hydrodynamic equations, and the latter used to model the polymer dynamics. The kinetics of the polymers is introduced using constitutive equations for viscoelastic fluids with finitely extensible non-linear elastic dumbbells with Peterlin's closure (FENE-P). The numerical model is first benchmarked by characterizing the rheological behaviour of dilute homogeneous solutions in various configurat…
The cascaded or central-moments-based lattice Boltzmann method (CM-LBM) is a robust alternative to the more conventional BGK-LBM for the simulation of high-Reynolds number flows. Unfortunately, its original formulation makes its extension to a broader range of physics quite difficult. To tackle this issue, a recent work [A. De Rosis, Phys. Rev. E 95, 013310 (2017)] proposed a more generic way to derive concise and efficient three-dimensional CM-LBMs. Knowing the original model also relies on central moments that are derived in an adhoc manner, i.e., by mimicking those of the Maxwell-Boltzmann …
Lattice Boltzmann (LB) models used for the computation of fluid flows represented by the Navier-Stokes (NS) equations on standard lattices can lead to non-Galilean invariant (GI) viscous stress involving cubic velocity errors. This arises from the dependence of their third order diagonal moments on the first order moments for standard lattices, and strategies have recently been introduced to restore GI without such errors using a modified collision operator involving either corrections to the relaxation times or to the moment equilibria. Convergence acceleration in the simulation of steady flo…
The accuracy and stability of implicit CFD codes are frequently impaired by the decoupling between variables, which can ultimately lead to numerical divergence. Coupled solvers, which solve all the governing equations simultaneously, have the potential to fix this problem. In this work, we report the implementation of coupled solvers for transient and steady-state electrically-driven flow simulations in the finite-volumes framework. The numerical method, developed in OpenFOAM, is generic for Newtonian and viscoelastic fluids and is formulated for the Poisson-Nernst-Planck and Poisson-Boltzmann…
It is well known that the number of particles should be scaled up to enable industrial scale simulation. The calculations are more computationally intensive when the motion of the surrounding fluid is considered. Besides the advances in computer hardware and numerical algorithms, the coupling scheme also plays an important role on the computational efficiency. In this study, a particle immersed boundary method (PIBM) for simulating the fluid-particle multiphase flow was presented and assessed in both two- and three-dimensional applications. The idea behind PIBM derives from the conventional mo…
Discretized fluid solvers coupled to a Newtonian dynamics method are a popular tool to study suspension flow. As any simulation technique with finite resolution, the lattice Boltzmann method, when coupled to discrete particles using the momentum exchange method, resolves the diverging lubrication interactions between surfaces near contact only insufficiently. For spheres, it is common practice to account for surface-normal lubrication forces by means of an explicit correction term. A method that additionally covers all further singular interactions for spheres is present in the literature as w…
