Spin-charge interconversion phenomena at the interface between magnetic materials and topological insulators (TIs) are attracting enormous interest in the research effort towards the development of fast and ultra-low power devices for the future information and communication technology. We report a large spin-to-charge conversion efficiency in Au/Co/Au/Sb2Te3/Si(111) heterostructures based on Sb2Te3 TIs grown by metal organic chemical vapor deposition on 4 inches Si(111) substrates. By conducting room temperature spin pumping ferromagnetic resonance, we measure an inverse Edelstein Effect length λIEE up to 0.75 nm, a record value for 3-dimensional chalcogenide-based TIs heterostructures. Our results open the path toward the use of chemical methods to produce TIs on large area Si substrates and characterized by highly performing spin-charge conversion, thus marking a milestone toward future technology-transfer.
Gallium oxide epitaxial layers grown on native substrates and basal plane sapphire were characherized by X-ray phtotelectron and optical reflectance spectroscopies. The XPS electronic structure mapping was coupled to Density functional theory calculations.
We report on the chemically stabilized epitaxial w-BN thin film grown on c-plane sapphire by pulsed laser deposition under slow kinetic condition. Traces of no other allotropes such as cubic (c) or hexagonal (h) BN phases are present. Sapphire substrate plays a significant role in stabilizing the metastable w-BN from h-BN target under unusual PLD growth condition involving low temperature and pressure and is explained based on density functional theory calculation. The hardness and the elastic modulus of the w-BN film are 37 & 339 GPa, respectively measured by indentation along <0001> directio…
Strain and strain adaption mechanisms in modern functional materials are of crucial importance for their performance. Understanding these mechanisms will advance innovative approaches for material properties engineering. Here we study the strain adaption mechanism in a thin film model system as function of epitaxial strain. Chemically disordered FeRh thin films are deposited on W-V buffer layers, which allow for large variation of the preset lattice constants, e.g. epitaxial boundary condition. It is shown by means of high resolution X-ray reciprocal space maps and transmission electron micros…
High-index Bi2Se3(221) film has been grown on In2Se3-buffered GaAs(001), in which a much retarded strain relaxation dynamics is recorded. The slow strain-relaxation process of in epitaxial Bi2Se3(221) can be attributed to the layered structure of Bi2Se3 crystal, where the epifilm grown along [221] is like a pile of weakly-coupled quintuple layer slabs stacked side-by-side on substrate. Finally, we have revealed the strong chemical bonding at the interface of Bi2Se3 and In2Se3 by plotting differential charge contour calculated by first-principle method. This study points to the feasibility of a…
Spot Profile Analysis Low Energy Electron Diffraction of Plasma-Enhanced Chemical Vapor Deposition Grown Epitaxial Few-Layer Graphene on Sapphire
University of Duisburg-Essen（杜伊斯堡-埃森大学）；Faculty of Engineering, University of Duisburg-Essen（杜伊斯堡-埃森大学工程学院）；Department of Chemistry and Waterloo Institute for Nanotechnology（化学系与滑铁卢纳米技术研究所）；Center for Nanointegration (CENIDE)（纳米集成中心）
Notwithstanding numerous density functional studies on the chemically induced transformation of multilayer graphene into a diamond-like film, a comprehensive convincing experimental proof of such a conversion is still lacking. We show that the fluorination of graphene sheets in Bernal (AB)-stacked bilayer graphene (AB-BLG) grown by chemical vapor deposition on a single crystal CuNi(111) surface triggers the formation of interlayer carbon-carbon bonds, resulting in a fluorinated diamond monolayer (F-diamane). Induced by fluorine chemisorption, the phase transition from AB-BLG to single layer di…
(111)NiO epitaxial layers are grown on c-sapphire substrates by pulsed laser deposition (PLD) technique. Structural and morphological properties of the films are studied using in-plane as well as out-of-plane high resolution X-ray diffraction and atomic force microscopy techniques as functions of growth temperature, oxygen pressure and the pulses count of the laser. The study shows that continuous epitaxial films of thickness as low as 3 nm with high crystalline quality, smooth surface and interface morphology can be grown by this technique. The study also reveals the co-existence of 60°-rotat…
We report on the realization of record low resistance Ohmic contacts to MOVPE-grown heavily Si-doped $β$-Ga$_2$O$_3$ and $β$-(Al$_x$Ga$_1-x$)$_2$ O$_3$ epitaxial films. Transfer length measurement (TLM) patterns were fabricated on the heavily Si-doped homoepitaxial $β$-Ga$_2$O$_3$ films with electron concentration (n) ranging from 1.77 to 3.23e20 cm^-3. Record low specific contact resistance and total contact resistance (Rc) of 1.62e-7 Ohm.cm^2 and 0.023 Ohm.mm were realized for $β$-Ga$_2$O$_3$: Si films with n > 3e20 cm^-3. TLM structures were also fabricated on heavily Si doped coherently st…
Nanoporous materials represent a versatile solution for a number of applications ranging from sensing, energy applications, catalysis, drug delivery, and many others. The synergy between the outstanding properties of graphene with a three-dimensional porous structure, circumventing the limits of its 2D nature, constitutes therefore a breakthrough for many fields. We report the first three-dimensional growth of epitaxial graphene on a porousified crystalline 4H-SiC(0001). The wafer porosification is performed via a sequence of metal-assisted photochemical and photoelectrochemical etching in hyd…
By inserting a SrZrO$_3$ buffer layer between the film and the substrate, we demonstrate a significant reduction of the threading dislocation density with an associated improvement of the electron mobility in La:BaSnO$_3$ films. A room temperature mobility of 140 cm$^2$ V$^{-1}\text{s}^{-1}$ is achieved for 25-nm-thick films without any post-growth treatment. The density of threading dislocations is only $4.9\times 10^{9}$ cm$^{-2}$ for buffered films prepared on (110) TbScO$_3$ substrates by pulsed laser deposition.
We report epitaxial growth and characterization of GaN thin films on sapphire (0001) substrates using low temperature GaN intermediate layer by plasma assisted molecular beam epitaxy (PA-MBE) technique. As grown and annealed GaN thin films were studied by high- resolution X-ray diffraction (HRXRD), atomic force microscopy (AFM), Hall Effect and photoluminescence (PL). It has been found that there is a significant improvement in the quality of the GaN films after annealing at 725 \degree C in terms of electron mobility, full width at half maximum (FWHM) of omega (ω) scan around (0002) XRD peak …
Room-temperature quantum oscillations of static magnetic susceptibility of silicon-carbide epitaxial layers grown on a silicon substrate by the method of the coordinated substitution of atoms
This work presents the surface reconstructions and transport properties of the topological insulator PtLuSb grown on Al0.1In0.9Sb/GaAs (001). Two stable surface reconstructions, (1x3) and c(2x2), were observed on PtLuSb (001) surfaces. Antimony-dimerization was determined to be the nature of the (1x3) surface reconstruction as evidenced by chemical binding energy shifts in the antimony 4d core-level for surface bonding components. The two surface reconstructions were studied as a function of Sb4 overpressure and substrate temperature to create a reconstruction phase diagram. From this reconstr…
Two-dimensional (2D) ferromagnetic materials have been exhibiting promising potential in applications, such as spintronics devices. To grow epitaxial magnetic films on silicon substrate, in the single-layer limit, is practically important but challenging. In this study, we realized the epitaxial growth of MnSn monolayer on Si(111) substrate, with an atomically thin Sn/Si(111)-$2\sqrt{3}\times2\sqrt{3}$- buffer layer, and controlled the MnSn thickness with atomic-layer precision. We discovered the ferromagnetism in MnSn monolayer with the Curie temperature (Tc) of ~54 K. As the MnSn film is gro…
Single-crystal Heusler atomic-scale superlattices that have been predicted to exhibit perpendicular magnetic anisotropy and half-metallicity have been successfully grown by molecular beam epitaxy. Superlattices consisting of full-Heusler Co$_2$MnAl and Fe$_2$MnAl with one to three unit cell periodicity were grown on GaAs (001), MgO (001), and Cr (001)/MgO (001). Electron energy loss spectroscopy maps confirmed clearly segregated epitaxial Heusler layers with high cobalt or high iron concentrations for samples grown near room temperature on GaAs (001). Superlattice structures grown with an exce…
A refined model of the origin of epitaxial tilt on miscut (or vicinal) substrates is explained by employing crystal modeling and reciprocal space analysis. The Nagai tilt model (H. Nagai, J. Appl. Phys., 45, 3789 (1974)) is often cited to explain the tilt of lattice planes in a pseudomorphic layer deposited on a miscut substrate that is observed in high resolution x-ray diffraction measurements. Here, however, we demonstrate how that model incorrectly describes how the substrate applies biaxial stress onto the epitaxial layer. Most importantly, the stress applied to an epitaxial layer on a mis…
The spontaneous formation of electronic orders is a crucial element for understanding complex quantum states and engineering heterostructures in two-dimensional materials. We report a novel $\sqrt{19}\times\sqrt{19}$ charge order in few-layer thick 1T-TaTe$_2$ transition metal dichalcogenide films grown by molecular beam epitaxy, which has not been realized. Our photoemission and scanning probe measurements demonstrate that monolayer 1T-TaTe$_2$ exhibits a variety of metastable charge density wave orders, including the $\sqrt{19}\times\sqrt{19}$ superstructure, which can be selectively stabili…
Epitaxial germanidation of full-Heusler Co2FeGe alloy thin films formed by rapid thermal annealing
采用快速热退火诱导锗化方法，在绝缘体上硅（SOI）衬底上外延生长Fe/Co/赝Ge（001）-on-insulator（GOI）多层膜，制备了全Heusler Co2 FeGe（CFG）合金薄膜。X射线衍射（XRD）分析结果表明，薄膜沿[001]方向外延生长，且具有面内外延结构，薄膜的面内外延关系为[100]|| GOI[100]，虽然电影稍微包含纹理成分。强的（111）和（200）超晶格衍射强度表明，CFG薄膜具有高度有序的L21结构。薄膜的横截面高分辨率透射电子显微镜图像表明薄膜具有主要的外延和轻微的织构组分，这与XRD测量结果一致。外延元件直接生长在SOI衬底的BOX层上，而不形成任何界面层。
Epitaxial graphene grown on metallic substrates presents, in several cases, a long-range periodic structure due to a lattice mismatch between the graphene and the substrate. For instance, graphene grown on Ir(111), displays a corrugated supercell with distinct adsorption sites due to a variation of its local electronic structure. This type of surface reconstruction represents a challenging problem for a detailed atomic surface structure determination for experimental and theoretical techniques. In this work, we revisited the surface structure determination of graphene on Ir(111) by using the u…
Interface-resolved structural properties of epitaxial Y$_3$Fe$_5$O$_{12}$/ Gd$_3$Fe$_5$O$_{12}$ bilayers grown on GGG(111) by pulsed laser deposition
National Institute of Science Education and Research（印度科学教育研究所）；Homi Bhabha National Institute（霍米·巴巴国立研究所）；Catalan Institute of Nanoscience and Nanotechnology（加泰罗尼亚纳米科学与技术研究所）
NbN films are grown on c-plane sapphire substrates by molecular beam epitaxy. The structural and superconducting properties of the film are characterized to demonstrate that growth parameters such as substrate temperature and active nitrogen flux effect the structural phase of films, and thereby the superconducting critical temperature. Four phases of NbN are identified for films grown in different conditions. In a novel finding, we demonstrate that atomically flat and highly crystalline $β$-$\textrm{Nb}_2\textrm{N}$ films can be grown at substrate temperatures of 1100 \degree C or higher, and…
Spin-based terahertz (THz) emitters, utilizing the inverse spin Hall effect, are ultra-modern sources for the generation of THz electromagnetic radiation. To make a powerful emitter having large THz amplitude and bandwidth, fundamental understanding in terms of microscopic models is essential. This study reveals important factors to engineer the THz emission amplitude and bandwidth in epitaxial Pt/Fe emitters grown on MgO and MgAl$_2$O$_4$ (MAO) substrates, where the choice of the substrate plays an important role. The THz amplitude and bandwidth are affected by the induced strain in the Fe sp…
Strain-Tunable Magnetocrystalline Anisotropy in Epitaxial Y3Fe5O12 Thin Films
我们证明了在晶格失配的Y3 Al 5 O 12衬底上生长的具有优良结晶质量的外延Y3 Fe 5 O 12薄膜中，磁晶各向异性的应变调谐范围超过一千高斯。铁磁共振（FMR）测量结果显示，Y3 Fe 5 O 12的应变引起的四元畸变的面外和面内单轴各向异性的线性依赖。重要的是，我们发现由逆自旋霍尔效应和FMR线宽展宽确定的自旋混合电导G_r仍然很大：Pt/Y3 Fe 5 O 12/Y3 Al 5 O 12异质结构中的G_r = 3.33 x 10^14 Ohm^-1 m ^-2，与在晶格匹配的Gd 3Ga 5 O 12衬底上生长的Pt/Y3 Fe 5 O 12中发现的值相当。
SnTe is a prototypical topological crystalline insulator, in which the gapless surface state is protected by a crystal symmetry. The hallmark of the topological properties in SnTe is the Dirac cones projected to the surfaces with mirror symmetry, stemming from the band inversion near the L points of its bulk Brillouin zone, which can be measured by angle-resolved photoemission. We have obtained the (111) surface of SnTe film by molecular beam epitaxy on BaF2(111) substrate. Photon-energy-dependence of in situ angle-resolved photoemission, covering multiple Brillouin zones in the direction perp…
The unconventional Si-compatible ferroelectricity in hafnia-based systems, which becomes robust only at nanoscopic sizes, has attracted a lot of interest. While a metastable polar orthorhombic (o-) phase (Pca21) is widely regarded as the responsible phase for ferroelectricity, a higher energy polar rhombohedral (r-) phase is recently reported on epitaxial HfZrO4 (HZO) films grown on (001) SrTiO3 (R3m or R3), (0001) GaN (R3), and Si (111). Armed with results on these systems, here we report a systematic study leading towards identifying comprehensive global trends for stabilizing r-phase polymo…
Epitaxial Growth of Large-area Bilayer Graphene on Ru(0001)
在Ru（0001）表面外延生长了大面积的双层石墨烯（BG），并用低温扫描隧道显微镜对其进行了表征。BG的底层的晶格被拉伸了1.2%，而顶层没有应变。两层之间的晶格失配导致形成具有约21.5nm的周期性和AA-和AB-堆叠的混合物的莫尔图案。原子缺陷周围的root 3 X root 3超结构归因于离域π电子的谷间散射，表明生长态BG表现得像本征自立式石墨烯。
YBa$_2$Cu$_3$O$_{7-δ}$ is a good candidate to systematically study high-temperature superconductivity by nanoengineering using advanced epitaxy. An essential prerequisite for these studies are coherently strained YBa$_2$Cu$_3$O$_{7-δ}$ thin films, which we present here using NdGaO$_3$ (110) as a substrate. The films are coherent up to at least 100 nm thickness and have a critical temperature of 89$\pm$1 K. The $a$ and $b$ lattice parameters of the YBa$_2$Cu$_3$O$_{7-δ}$ are matched to the in-plane lattice parameters of NdGaO$_3$ (110), resulting in a large reduction of the orthorhombicity of t…
