Increased isolation mass for pebble accreting planetary cores in pressure maxima of protoplanetary discs
Zsolt Sándor, Zsolt Regály
备注：
6 pages, 3 figures, This article has been accepted for publication in MNRAS Letters Published by Oxford University Press on behalf of the Royal Astronomical Society
The growth of a pebble accreting planetary core is stopped when reaching its \textit{isolation mass} that is due to a pressure maximum emerging at the outer edge of the gap opened in gas. This pressure maximum traps the inward drifting pebbles stopping the accretion of solids onto the core. On the other hand, a large amount of pebbles ($\sim 100M_\oplus$) should flow through the orbit of the core until reaching its isolation mass. The efficiency of pebble accretion increases if the core grows in a dust trap of the protoplanetary disc. Dust traps are observed as ring-like structures by ALMA suggesting the existence of global pressure maxima in discs that can also act as planet migration traps. This work aims to reveal how large a planetary core can grow in such a pressure maximum by pebble accretion. In our hydrodynamic simulations, pebbles are treated as a pressureless fluid mutually coupled to the gas via drag force. Our results show that in a global pressure maximum the pebble isolation mass for a planetary core is significantly larger than in discs with power-law surface density profile. An increased isolation mass shortens the formation time of giant planets.
Icy pebbles may play an important role in planet formation close to the water ice line of protoplanetary discs. There, dust coagulation is more efficient and re-condensation of vapor on pebbles may enhance their growth outside the ice line. Previous theoretical studies showed that disruption of icy pebbles due to sublimation increases the growth rate of pebbles inside and outside the ice line, by freeing small silicate particles back in the dust reservoir of the disc. However, since planet accretion is dependent on the Stokes number of the accreting pebbles, the growth of planetesimals could b…
A notable challenge of planet formation is to find a path to directly form planetesimals from small particles. We aim to understand how drifting pebbles pile up in a protoplanetary disk with a non-uniform turbulence structure. We consider a disk structure in which the midplane turbulence viscosity is increasing with radius in protoplanetary disks as in the outer region of a dead zone. We perform 1D diffusion-advection simulations of pebbles that include back-reaction (the inertia) to radial drift and vertical/radial diffusion of pebbles for a given pebble-to-gas mass flux. We report a new mech…
We introduce collisions of solids as a new and efficient ionization mechanism for gas in protoplanetary disks, which especially operates in the dense midplane of protoplanetary disks. This idea is sparked by laboratory experiments where we found that charge, which is exchanged by grains in mutual collision (tribocharging), is not tied to their surfaces alone. As kind of collateral effect, charges also become entrained into the gas phase, i.e. collisions ionize the protoplanetary disk. Therefore, solids are not only sinks of charges in disks but also sources. A first estimate shows that ionizat…
The formation of the first planetesimals and the final growth of planetary cores relies on the abundance of small pebbles. The efficiencies of both the streaming instability (SI) process, suggested to catalyze the early growth of planetesimals, and the pebble-accretion process, suggested to accelerate the growth of planetary cores, depend on the sizes of solids residing in the disk. In particular, these processes were found to be sensitive to size distribution of solids, and efficient planetesimal formation and growth through these channels require a limited pebble size distribution. Here we s…
We examine the migration of luminous low-mass cores in laminar protoplanetary discs where accretion occurs mainly because of disc winds and where the planet luminosity is generated by pebble accretion. Using 2D hydrodynamical simulations, we determine the eccentricities induced by thermal forces as a function of gas and pebble accretion rates, and also evaluate the importance of the torque exerted by the solid component relative to the gas torque. For a gas accretion rate $\dot M= 2\times 10^{-8}$ $M_\odot/$yr and pebble flux $\dot M_{peb}=170$ $M_\oplus$/Myr, we find that embryo eccentricitie…
Forming planetesimals from pebbles is a major challenge in our current understanding of planet formation. In a protoplanetary disk, pebbles drift inward near the disk midplane via gas drag and they may enter a dead zone. In this context, we identified that the backreaction of the drag of pebbles onto the gas could lead to a runaway pile-up of pebbles, the so-called no-drift mechanism. We improve upon the previous study of the no-drift mechanism by investigating the nature and characteristics of the resultant planetesimal belt. We performed 1D diffusion-advection simulations of drifting pebbles…
Aims. Dust plays a crucial role in the evolution of protoplanetary disks. We study the dynamics and growth of initially sub-$μm$ dust particles in self-gravitating young protoplanetary disks with various strengths of turbulent viscosity. We aim to understand the physical conditions that determine the formation and spatial distribution of pebbles when both disk self-gravity and turbulent viscosity can be concurrently at work. Methods. We perform the thin-disk hydrodynamics simulations of self-gravitating protoplanetary disks over an initial time period of 0.5 Myr using the FEOSAD code. Turbulen…
[abridged] Recent laboratory experiments indicate that destructive collisions of icy dust particles occur with much lower velocities than previously thought. When these new velocities are considered from laboratory experiments in dust evolution models, a growth to pebble sizes in protoplanetary disks (PPDs) is difficult. This may contradict (sub-)mm observations and challenge the formation of planetesimals and planets. We investigate the conditions that are required in dust evolution models for growing and trapping pebbles in PPDs when the fragmentation speed is 1ms$^{-1}$ in the entire disk. …
The composition of planets may be largely determined by the chemical processing and accretion of icy pebbles in protoplanetary disks. Recent observations of protoplanetary disks hint at wide-spread depletion of gaseous carbon. The missing volatile carbon is likely frozen in CO and/or CO$_2$ ice on grains and locked into the disk through pebble trapping in pressure bumps or planetesimals. We present the results of the first successful ACA (Atacama Compact Array) [C I] $J$ = 1-0 mini-survey of seven protoplanetary disks. Using tailored azimuthally symmetric DALI (Dust And LInes) thermo-chemical …
Are the observed gaps in protoplanetary discs caused by growing planets?
最近对原行星盘的详细观测揭示了许多亚结构，其中大多数是环状的。一种解释是，这些光环是由不断增长的行星造成的。这些潜在的行星还没有在它们的圆盘上打开非常深的缝隙。相反，这些行星在圆盘上形成小间隙，在其轨道外部产生小的压力颠簸，阻止最大尘埃颗粒的流入。在卵石吸积范例中，这个行星质量对应于卵石隔离质量，卵石吸积停止，有效的气体吸积开始。我们通过卵石和气体吸积进行行星人口合成，包括I型和II型迁移。在模拟的第一阶段，我们研究行星到达卵石隔离质量所需的条件，并将它们的位置与观察到的间隙进行比较。我们发现，为了匹配的差距结构2000 M E的卵石是必要的，这将只适用于最富金属的恒星。然后，我们跟踪这些行星的演化，将其与观测到的系外行星种群进行比较。行星形成在光盘与这些大量的卵石导致大多数形成气体巨星和只有很少的超级地球，矛盾的观察。这导致的结论是，要么（i）观察到的磁盘是例外，（ii）不是所有的差距，观察到的磁盘是由行星或（iii），我们错过了一些重要的成分，在行星形成有关的气体吸积和/或行星迁移。
Axisymmetric dust rings containing tens to hundreds of Earth masses of solids have been observed in protoplanetary discs with (sub-)millimetre imaging. Here, we investigate the growth of a planetary embryo in a massive (150M$_\oplus$) axisymmetric dust trap through dust and gas hydrodynamics simulations. When accounting for the accretion luminosity of the planetary embryo from pebble accretion, the thermal feedback on the surrounding gas leads to the formation of an anticyclonic vortex. Since the vortex forms at the location of the planet, this has significant consequences for the planet's gro…
Recent observations of protoplanetary disks have revealed ring-like structures that can be associated to pressure maxima. Pressure maxima are known to be dust collectors and planet migration traps. Most of planet formation works are based either on the pebble accretion model or on the planetesimal accretion model. However, recent studies proposed the possible formation of Jupiter by the hybrid accretion of pebbles and planetesimals. We aim to study the full process of planet formation consisting of dust evolution, planetesimal formation and planet growth at a pressure maximum in a protoplaneta…
Observations of protoplanetary disks have revealed them to be complex and dynamic, with vertical and radial transport of gas and dust occurring simultaneously with chemistry and planet formation. Previous models of protoplanetary disks focused primarily on chemical evolution of gas and dust in a static disk, or dynamical evolution of solids in a chemically passive disk. In this paper, we present a new 1D method for modelling pebble growth and chemistry simultaneously. Gas and small dust particles are allowed to diffuse vertically, connecting chemistry at all elevations of the disk. Pebbles are…
Observationally inferred crystalline abundance in silicates in comets, which should have been formed in the outer region of a protoplanetary disk, is relatively high (~ 10-60%), although crystalline silicates would be formed by annealing of amorphous precursors in the disk inner region. In order to quantitatively address this puzzle, we have performed Monte Carlo simulation of advection/diffusion of silicate particles in a turbulent disk, in the setting based on pebble accretion model: pebbles consisting of many small amorphous silicates embedded in icy mantle are formed in the disk outer regi…
Pebble accretion is an emerging paradigm for the fast growth of planetary cores. Pebble flux and pebble sizes are the key parameters used in the pebble accretion models. We aim to derive the pebble sizes and fluxes from state-of-the-art dust coagulation models, understand their dependence on disk parameters and the fragmentation threshold velocity, and the impact of those on the planetary growth by pebble accretion. We use a one-dimensional dust evolution model including dust growth and fragmentation to calculate realistic pebble sizes and mass flux. We use this information to integrate the gr…
Tracing Pebble Drift History in Two Protoplanetary Disks with CO Enhancement
University of Wisconsin-Madison（威斯康星大学麦迪逊分校）；University of Exeter（埃克塞特大学）；University of Leeds（利兹大学）；Massachusetts Institute of Technology（麻省理工学院）；University of Virginia（弗吉尼亚大学）；Boston University（波士顿大学）；Harvard & Smithsonian（哈佛大学与史密森尼学会）；University of Michigan（密歇根大学）
Rapid Formation of Gas-giant Planets via Collisional Coagulation from Dust Grains to Planetary Cores. II. Dependence on Pebble Bulk Density and Disk Temperature
The similar orbital distances and detection rates of debris disks and the prominent rings observed in protoplanetary disks suggest a potential connection between these structures. We explore this connection with new calculations that follow the evolution of rings of pebbles and planetesimals as they grow into planets and generate dusty debris. Depending on the initial solid mass and planetesimal formation efficiency, the calculations predict diverse outcomes for the resulting planet masses and accompanying debris signature. When compared with debris disk incidence rates as a function of lumino…
Optical properties are required for the correct understanding and modelling of protoplanetary and debris discs. By assuming that comets are the most pristine bodies in the solar system, our goal is to derive optical constants of real protoplanetary material. We determine the complex index of refraction of the near-surface material of comet 67P/Churyumov-Gerasimenko by fitting the sub-millimetre/millimetre observations of the thermal emission of the comet's sub-surface made by the Microwave Instrument for the Rosetta Orbiter (MIRO) with synthetic temperatures derived from a thermophysical model…
We investigate the pebble isolation mass for a planet on a fixed eccentric orbit in its protoplanetary disc by conducting a set of 2D hydrodynamical simulations including dust turbulent diffusion. A range of planet eccentricities up to $e=0.2$ is adopted. Our simulations also cover a range of $α-$turbulent viscosities, and for each pair $\{α,e\}$ the pebble isolation mass is estimated as the minimum planet mass in our simulations such that solids with a Stokes number $\gtrsim 0.05$ do not flow across the planet orbit and remain trapped around a pressure bump outside the planet gap. For $α<10^{…
