骨-种植体界面的应力遮挡:表面粗糙度和骨-种植体接触比的影响
Stress shielding at the bone-implant interface: influence of surface roughness and of the bone-implant contact ratio
摘要:
非骨水泥型种植体的短期和长期稳定性在很大程度上取决于种植体与骨组织之间的界面载荷传递。由于骨和植入物之间的材料特性差异,剪切应力产生应力屏蔽效应。假体周围骨组织应力场的测量一直是个难题。本研究旨在研究假体周围骨组织中应力场对i)植入物表面粗糙度,ii)骨和植入物的材料特性,iii)骨-植入物接触比的依赖性。为此,开发了骨整合骨种植体界面的微尺度2-D有限元模型,其中表面粗糙度由正弦表面建模。结果表明,等静压不受骨-植入物界面存在的影响,而剪切应力是由于几何奇异性(低表面粗糙度)和骨-植入物界面剪切应力(高表面粗糙度)的综合效应而产生的。当骨-植入物接触比值较低时,应力屏蔽效应可能更重要,这对应于植入物稳定性相对较低的情况。剪切应力在距界面0 - 0.1倍粗糙度波长$λ$的距离处达到最大值,在距种植体表面大于$λ$的距离处趋于0,与骨-种植体接触比和波度比无关。与分析模型的比较允许验证数值结果。未来的工作应该使用目前的方法来模拟骨整合现象。
英文摘要:
Short and long-term stabilities of cementless implants are strongly determined by the interfacial load transfer between implants and bone tissue. Stress-shielding effects arise from shear stresses due to the difference of material properties between bone and the implant. It remains difficult to measure the stress field in periprosthetic bone tissue. This study proposes to investigate the dependence of the stress field in periprosthetic bone tissue on i) the implant surface roughness, ii) material properties of bone and of the implant, iii) the bone-implant contact ratio. To do so, a microscale 2-D finite element model of an osseointegrated boneimplant interface was developed where the surface roughness was modeled by a sinusoidal surface. The results show that the isostatic pressure is not affected by the presence of the bone-implant interface while shear stresses arise due to the combined effects of a geometrical singularity (for low surface roughness) and of shear stresses at the bone-implant interface (for high surface roughness). Stress-shielding effects are likely to be more important when the bone-implant contact ratio value is low, which corresponds to a case of relatively low implant stability. Shear stress reach a maximum value at a distance from the interface comprised between 0 and 0.1 time roughness wavelength $λ$ and tend to 0 at a distance from the implant surface higher than $λ$, independently from bone-implant contact ratio and waviness ratio. A comparison with an analytical model allows validating the numerical results. Future work should use the present approach to model osseointegration phenomena.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。