arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2510.27367physics.med-phphysics.comp-ph
收藏

通过孔隙率梯度增强功能梯度骨支架中的力学刺激:一项有限元分析研究

Enhancing Mechanical Stimuli in Functionally Graded Bone Scaffolds Through Porosity Gradients: A Finite Element Analysis Study

University of New South Wales(新南威尔士大学);Technische Universität Berlin(柏林工业大学);Berlin Institute of Health, Charité—Universitätsmedizin Berlin(柏林健康研究所,夏里特-柏林大学医学中心);University of Technology Sydney(悉尼科技大学)

Anson Wen Han Cheong, Vahid Badali, Sean Kiely, Iman Roohani, Yang Jiang, Jianguang Fang, Ali Entezari

AI总结:

本研究通过有限元分析系统探究了孔隙率梯度大小、分辨率、材料特性和固定板刚性对功能梯度骨支架内力学刺激分布的影响,发现引入孔隙率梯度可显著增强支架内特别是应力遮挡区域的平均八面体剪应变,且该效应随梯度增大和材料刚度提高而增强。

摘要:

在骨支架内实现最佳的生物力学环境对于促进组织再生至关重要,特别是在承重解剖部位,刚性固定会引发应力遮挡并损害愈合。功能梯度(FG)支架通过引入受控的孔隙率或材料特性变化,作为一种通过促进更有利的载荷传递来缓解应力遮挡的策略,受到了广泛关注。本研究系统调查了孔隙率梯度大小(即孔隙率的最大值与最小值之比)、梯度分辨率、支架材料特性和固定板刚性对FG支架内力学刺激分布的影响。在用骨板稳定的的一个股骨节段缺损模型上进行了有限元分析(FEA),,并将多种孔隙率梯度策略与由体心立方(BCC)晶胞组成的均匀支架进行了比较。评估了由钛合金(Ti-6Al-4V)、生物活性玻璃(45S5 Bio-glass)和聚乳酸(PLA)制成的支架,以涵盖一系列材料刚度。引入孔隙率梯度持续增强了支架内的平均八面体剪应变,特别是在受应力遮挡影响的固定板邻近区域。力学刺激改善的程度随着孔隙率梯度幅度的增大和梯度分辨率的提高而增加。这些改善在较刚硬的材料(如Ti-6Al-4V)中更为显著,强调了支架材料特性与结构设计之间的关键相互作用。这些发现突出了定制孔隙率分布和材料选择以优化骨再生支架力学性能的重要性。

英文摘要:

Achieving an optimal biomechanical environment within bone scaffolds is critical for promoting tissue regeneration, particularly in load-bearing anatomical sites where rigid fixation can induce stress shielding and compromise healing. Functionally graded (FG) scaffolds, which incorporate controlled variations in porosity or material properties, have attracted significant attention as a strategy to mitigate stress shielding by promoting more favourable load transfer. In this study, the effects of porosity gradient magnitude (i.e., max-to-min ratio of porosity), gradient resolution, scaffold material properties, and fixation plate rigidity on the distribution of mechanical stimuli within FG scaffolds were systematically investigated. Finite element analyses (FEA) were conducted on a femoral segmental defect model stabilised with a bone plate, and multiple porosity gradient strategies were compared against a corresponding uniform scaffold composed of body-centred cubic (BCC) unit cells. Scaffolds composed of titanium alloy (Ti-6Al-4V), bioactive glass (45S5 Bio-glass), and polylactic acid (PLA) were evaluated to capture a range of material stiffnesses. Introducing porosity gradients consistently enhanced the mean octahedral shear strain within the scaffold, particularly in regions adjacent to the fixation plate affected by stress shielding. The magnitude of mechanical stimulus improvement increased with both greater porosity gradient magnitudes and higher gradient resolution. These improvements were more pronounced in stiffer materials, such as Ti-6Al-4V, emphasising the critical interplay between scaffold material properties and architectural design. These findings highlight the importance of tailoring both porosity profiles and material selection to optimise scaffold mechanics for bone regeneration.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑