Spin-torque ferromagnetic resonance (ST-FMR) particularly using magnetic insulators and heavy metals possessing a giant spin Hall effect (SHE) has gotten a lot of attention for the development of spintronic devices. To devise complex functional devices, it is necessary to construct the equivalent spin-circuit representations of different phenomena. Such representation is useful to translate physical equations into circuit elements, benchmarking experiments, and then proposing creative and efficient designs. We utilize the superposition principle in circuit theory to separate the spin Hall magnetoresistance and spin pumping contributions in the ST-FMR experiments. We show that the proposed spin-circuit representation reproduces the standard results in literature. We further consider multilayers like a spin-valve structure with an SHE layer sandwiched by two magnetic layers and show how the corresponding spin-circuit representation can be constructed by simply writing a vector netlist and solved using circuit theory.
Measurements of spin-orbit torques in a ferromagnetic/nonmagnetic multilayer are typically based on an assumption that the entire ferromagnetic layer uniformly responds to the spin-orbit torque. This assumption breaks down when the thickness of the ferromagnetic layer is comparable to the dynamic exchange coupling length, which can be as short as a few nanometers in certain measurement geometries. The nonuniform magnetization reorientation coupled with nonuniform contribution of each magnetic sublayer to the magnetoresistance or the Kerr effect may impact the accuracy in the extrapolation of s…
We theoretically study the spin current and spin-transfer torque generation in a conventional spin- valve hybrid structure of type ferromagnetic/normal metal/ferromagnetic (FM/NM/FM) made of the topological insulator (TI), in which a gate voltage is attached to the normal layer. We demonstrate the penetration of the spin-transfer torque into the right ferromagnetic layer and show that, unlike graphene spin-valve junction, the spin-transfer torque in TI is very sensitive to the chemical potential of the NM region. As an important result, by changing the chemical potential of the NM spacer and m…
We use micromagnetic simulation to demonstrate layer-selective detection of magnetization directions from magnetic dots having two recording layers by using a spin-torque oscillator (STO) as a read device. This method is based on ferromagnetic resonance (FMR) excitation of recording-layer magnetizations by the microwave field from the STO. The FMR excitation affects the oscillation of the STO, which is utilized to sense the magnetization states in a recording layer. The recording layers are designed to have different FMR frequencies so that the FMR excitation is selectively induced by tuning t…
Using a multilayer structure containing (cobalt detector layer)/(copper spacer)/(Permalloy source layer), we show experimentally how the non-reorientable spin-orbit torque generated by the Permalloy source layer (the component of spin-orbit torque that does not change when the Permalloy magnetization is rotated) can be measured using spin-torque ferromagnetic resonance (ST-FMR) with lineshape analysis. We find that dynamic spin pumping between the magnetic layers exerts torques on the magnetic layers as large or larger than the spin-orbit torques, so that if dynamic spin pumping is neglected t…
Under conditions where the angular momentum of a ferromagnetic particle is dominated by intrinsic spin, applied torque is predicted to cause gyroscopic precession of the particle. If the particle is sufficiently isolated from the environment, a measurement of spin precession can potentially yield sensitivity to torque beyond the standard quantum limit. Levitation of a micron-scale ferromagnetic particle above a superconductor is a possible method of near frictionless suspension enabling observation of ferromagnetic particle precession and ultrasensitive torque measurements. We experimentally i…
In ferromagnetic trilayers, a spin-orbit-induced spin current can have a spin polarization of which direction is deviated from that for the spin Hall effect. Recently, magnetization switching in ferromagnetic trilayers has been proposed and confirmed by the experiments. In this work, we theoretically and numerically investigate the switching current required for perpendicular magnetization switching in ferromagnetic trilayers. We confirm that the tilted spin polarization enables field-free deterministic switching at a lower current than conventional spin-orbit torque or spin-transfer torque sw…
Spin transfer torque in magnetic structures occurs when the transverse component of the spin current that flows from the nonmagnetic medium to ferromagnetic medium are absorbed by the interface. In this paper, considering the Rashba effect on semiconductor region, we have discussed the spin transfer torque in semiconductor/ferromagnetic structure and obtained the components of spin-current density for two models: (I)-single electron and (II)- the distribution of electrons. We have shown that whatever the difference between Fermi surfaces in semiconductor and Fermi spheres for the up and down s…
We study the spatial distribution of spin torque induced by a strong Rashba spin-orbit coupling (RSOC) in a ferromagnetic (FM) metal layer, using the Keldysh non-equilibrium Green's function method. In the presence of the s-d interaction between the non-equilibrium conduction electrons and the local magnetic moments, the RSOC effect induces a torque on the moments, which we term as the Rashba spin torque. A correlation between the Rashba spin torque and the spatial spin current is presented in this work, clearly mapping the spatial distribution of Rashba Spin torque in a nano-sized ferromagnet…
We theoretically examine the spin-transfer torque in the presence of spin-orbit interaction (SOI) at impurities in a ferromagnetic metal on the basis of linear response theory. We obtained, in addition to the usual spin-transfer torque, a new contributioin $\sim {\bm j}_{\rm SH}^{\phantom{\dagger}} \cdot \nabla {\bm n}$ in the first order in SOI, where ${\bm j}_{\rm SH}^{\phantom{\dagger}}$ is the spin Hall current driven by an external electric field. This is a reaction to inverse spin Hall effect driven by spin motive force in a ferromagnet.
Ferromagnetic heterostructures provide an ideal platform to explore the nature of spin-orbit torques arising from the interplay mediated by itinerant electrons between a Rashba-type spin-orbit coupling and a ferromagnetic exchange interaction. For such a prototypic system, we develop a set of coupled diffusion equations to describe the diffusive spin dynamics and spin-orbit torques. We characterize the spin torque and its two prominent--out-of-plane and in-plane--components for a wide range of relative strength between the Rashba coupling and ferromagnetic exchange. The symmetry and angular de…
Spin orbit torques are of great interest for switching the magnetization direction in nanostructures, moving skyrmions and exciting spin waves. The standard method of determining their efficiency is by spin torque ferromagnetic resonance (ST-FMR), a technique that involves analyzing the resonance linewidth or lineshape. On microstuctures these two analysis methods are quite consistent. Here we present ST-FMR results on permalloy (Ni$_{80}$Fe$_{20}$) nanowires -- with widths varying from $150$ to 800 nm -- that show that the standard model used to analyze the resonance linewidth and lineshape g…
We demonstrate that the spin Hall effect in a thin film with strong spin-orbit scattering can excite magnetic precession in an adjacent ferromagnetic film. The flow of alternating current through a Pt/NiFe bilayer generates an oscillating transverse spin current in the Pt, and the resultant transfer of spin angular momentum to the NiFe induces ferromagnetic resonance (FMR) dynamics. The Oersted field from the current also generates an FMR signal but with a different symmetry. The ratio of these two signals allows a quantitative determination of the spin current and the spin Hall angle.
In a ferromagnetic heterostructure, the interplay between a Rashba spin-orbit coupling and an exchange field gives rise to a current-driven spin torque. In a realistic device setup, we investigate the Rashba spin torque in the diffusive regime and report two major findings: (i) a nonvanishing torque exists at the edges of the device even when the magnetization and effective Rashba field are aligned; (ii) anisotropic spin relaxation rates driven by the Rashba spin-orbit coupling assign the spin torque a general expression ${\bm T}=T^y_{\para}(θ){\bm m}\times(\hat{\bm y}\times{\bm m})+T^y_{\bot}…
We study spin-orbit-torque-driven ferromagnetic resonance (FMR) in ferromagnetic (FM) bilayers, consisting of Co and permalloy (Py), sandwiched between Pt and MgO layers. We find that the FM layer in contact with the Pt layers dominantly determines that spin Hall angle, which is consistent with the spin-transparency model. By contrast, the FMR linewidths are considerably influenced not only by the spin-pumping effect across the Pt|FM in terface but also by the spin relaxation such as two-magnon scattering at the FMMgO interface.The CoMgO interface leads to notably increased FMR linewidths, whi…
Spin-torque oscillators are strong candidates as nano-scale microwave generators and detectors. However, because of large amplitude-phase coupling (non-linearity), phase noise is enhanced over other linear auto-oscillators. One way to reduce nonlinearity is to use ferromagnetic layers as a resonator and excite them at localized spots, making a resonator-excitor pair. We investigated the excitation of oscillations in dipole-coupled ferromagnetic layers, driven by localized current at ferromagnetic nano-contacts. Oscillations possessed properties of optical-mode spin-waves and at low field ($\ap…
Spin-orbit torques in bilayers of ferromagnetic and nonmagnetic materials hold promise for energy efficient switching of magnetization in nonvolatile magnetic memories. Previously studied spin Hall and Rashba torques originate from spin-orbit interactions within the nonmagnetic material and at the bilayer interface, respectively. Here we report a spin-orbit torque that arises from planar Hall current in the ferromagnetic material of the bilayer and acts as either positive or negative magnetic damping. This planar Hall torque exhibits unusual biaxial symmetry in the plane defined by the applied…
We consider theoretically a current flowing perpendicular to interfaces of a spin-valve type ferromagnetic metallic junction. For the first time an effective approach is investigated to calculate a simultaneous action of the two current effects, namely, the nonequilibrium longitudinal spin injection and the transversal spin-transfer surface torque. Dispersion relation for fluctuations is derived and solved. Nonlinear problem is solved about steady state arising due to instability for a thick enough free layer.
The electrical resistance of ferromagnetic/normal-metal (F/N) heterostructures depends on the nature of the junctions which may be tunnel barriers, point contacts, or intermetallic interfaces. For all junction types, the resistance of disordered F/N/F perpendicular spin valves as a function of the angle between magnetization vectors is shown to obey a simple universal law. The spin-current induced magnetization torque can be measured by the angular magnetoresistance of these spin valves. The results are generalized to arbitrary magnetoelectronic circuits.
We investigate a possible correlation between spin orbit torque (SOT) and exchange-bias (EB) in IrMn-layer/ferromagnetic-ribbon heterostructure by performing magnetoimpedance (MI) measurements. To uncover this correlation, we benefit from EB training effect probed by MI effect at room temperature. A damping-like SOT driven by ac current through the antiferromagnetic IrMn applies to the ferromagnetic ribbon layer, determined by MI magnetic field and frequency sweeps. Importantly, magnitude of the SOT is observed to remain intact against EB training and decrease of EB through alternative magneti…
Charge resistance and spin torque are generated by coherent carrier transport through ferromagnetic 360 degree domain walls, although they follow qualitatively different trends than for 180 degree domain walls. The charge resistance of 360 degree domain walls reaches a maximum at an intermediate wall thickness, unlike 180 degree domain walls, whose resistance decreases monotonically with wall thickness. The peak amplitude of the spin torque and the optimal thickness of the domain wall to maximize torque for a 360 degree wall are more than twice as large as found for a 180 degree domain wall in…
We present a theoretical analysis of current driven ferromagnetic resonance in a ferromagnet/normal-metal/ferromagnet tri-layer. This method of driving ferromagnetic resonance was recently realized experimentally by Tulapurkar et al. [Nature 438, 339 (2005)] and Sankey et al. [Phys. Rev. Lett. 96, 227601 (2006)]. The precessing magnetization rectifies the alternating current applied to drive the ferromagnetic resonance and leads to the generation of a dc voltage. Our analysis shows that a second mechanism to generate a dc voltage, rectification of spin currents emitted by the precessing magnet…
We propose an experimental scheme to determine the spin-transfer torque efficiency excited by the spin-orbit interaction in ferromagnetic bilayers from the measurement of the longitudinal magnetoresistace. Solving a diffusive spin-transport theory with appropriate boundary conditions gives an analytical formula of the longitudinal charge current density. The longitudinal charge current has a term that is proportional to the square of the spin-transfer torque efficiency and that also depends on the ratio of the film thickness to the spin diffusion length of the ferromagnet. Extracting this cont…
We report the rectifying effect of a constant-wave radio frequency (RF) current by a magnetic domain wall (DW) on a single-layered ferromagnetic wire. A direct-current (DC) voltage is generated by the spin torque diode effect, which is a consequence of magnetoresistance oscillation due to the resonant spin wave excitation induced by the spin-polarized RF current. The DC voltage spectrum strongly depends on the internal spin structure in the DW, which corresponds to the magnetic fingerprint of the spin structure in the ferromagnetic wire.
Recent theories of spin-current-induced magnetization reversal are formulated in terms of a spin-mixing conductance $G^{mix}$. We evaluate $G^{mix}$ from first-principles for a number of (dis)ordered interfaces between magnetic and non-magnetic materials. In multi-terminal devices, the magnetization direction of a one side of a tunnel junction or a ferromagnetic insulator can ideally be switched with negligible charge current dissipation.
Within the s-d model description, we derive the current-driven spin torque in a ferromagnet, taking explicitly into account a spin-relaxing Caldeira-Leggett bath coupling to the s-electrons. We derive Bloch-Redfield equations of motion for the s-electron spin dynamics, and formulate a systematic gradient expansion to obtain non-adiabatic (higher-order) corrections to the well-known adiabatic (first-order) spin torque. We provide simple analytical expressions for the second-order spin torque. The theory is applied to current-driven domain wall motion. Second-order contributions imply a deformat…
Spin-torque ferromagnetic resonance (ST-FMR) is a common method used to measure spin-orbit torques (SOTs) in heavy metal/ferromagnet bilayer structures. In the course of a measurement, other resonant processes such as spin pumping (SP) and heating can cause spin current or heat flows between the layers, inducing additional resonant voltage signals via the inverse spin Hall effect (ISHE) and Nernst effects (NE). In the standard ST-FMR geometry, these extra artifacts exhibit a dependence on the angle of an in-plane magnetic field that is identical to the rectification signal from the SOTs. We sh…
When spin-orbit torques are measured using spin-torque ferromagnetic resonance (ST-FMR), two alternative ways of analyzing the results to extract the torque efficiencies -- lineshape analysis and analysis of the change in linewidth versus DC current -- often give inconsistent results. We identify a source for these inconsistencies. We show that fits of ST-FMR data to the standard analysis framework leave significant residuals that we identify as due to (i) current-induced excitations of a small volume of magnetic material with magnetic damping much larger than the bulk of the magnetic layer, t…
We report that spin current transport across Pt-ferromagnet (FM) interfaces is strongly dependent on the type and the thickness of the FM layer and on post-deposition processing protocols. By employing both harmonic voltage measurements and spin-torque ferromagnetic resonance measurements, we find that the efficiency of the Pt spin Hall effect in exerting a damping-like spin torque on the FM ranges from < 0.05 to > 0.10 under different interfacial conditions. We also show that the temperature dependence of the spin torque efficiencies for both the damping-like torque and field-like torque is d…
We study theoretically the detection and possible utilization of electric current-induced mechanical torques in ferromagnetic-normal metal heterostructures that are generated by spin-flip scattering or the absorption of transverse spin currents by a ferromagnet. To this end, we analyze the DC voltage signals over a spin valve that is driven by an AC current. In agreement with recent studies, this "rectification", measured as a function of AC frequency and applied magnetic field, contains important information on the magnetostatics and --dynamics. Subsequently, we show that the vibrations excit…
We use micro-focus Brillouin light scattering spectroscopy to study the effects of spin-orbit torque on thermal spin waves in almost angular-momentum compensated ferrimagnetic CoGd alloy films. The spin-orbit torque is produced by the electric current flowing in the Pt layer adjacent to CoGd. Both the ferromagnetic and the exchange modes are detected in our measurements. The intensity and the linewidth of the ferromagnetic mode are modified by the spin-orbit torque. In contrast, the properties of the exchange mode are unaffected by the spin-orbit torque. We also find that the frequencies and t…
Spin-orbit torque in heavy metal/ferromagnet heterostructures with broken spatial inversion symmetry provides an efficient mechanism for manipulating magnetization using a charge current. Here, we report the presence of a spin torque in a single ferromagnetic layer in both asymmetric MgO/Fe0.8Mn0.2 and symmetric MgO/Fe0.8Mn0.2/MgO structures, which manifests itself in the form of an effective field transverse to the charge current. The current to effective field conversion efficiency, which is characterized using both the nonlinear magnetoresistance and second-order planar Hall effect methods,…
We demonstrate a technique of broadband spin torque ferromagnetic resonance (ST-FMR) with magnetic field modulation for measurements of spin wave properties in magnetic nanostructures. This technique gives great improvement in sensitivity over the conventional ST-FMR measurements, and application of this technique to nanoscale magnetic tunnel junctions (MTJs) reveals a rich spectrum of standing spin wave eigenmodes. Comparison of the ST-FMR measurements with micromagnetic simulations of the spin wave spectrum allows us to explain the character of low-frequency magnetic excitations in nanoscale…
Magnetic skyrmion is a promising building block for developing information storage and computing devices. It can be stabilized in a ferromagnetic thin film with the Dzyaloshinskii-Moriya interaction (DMI). The moving ferromagnetic skyrmion may show the skyrmion Hall effect, that is, the skyrmion shows a transverse shift when it is driven by a spin current. Here, we numerically and theoretically study the current-driven dynamics of a ferromagnetic nanoscale skyrmion in the presence of the anisotropic DMI, where the skyrmion has an elliptical shape. The skyrmion Hall effect of the elliptical sky…
Spin torque from spin current applied to a nanoscale region of a ferromagnet can act as negative magnetic damping and thereby excite self-oscillations of its magnetization. In contrast, spin torque uniformly applied to the magnetization of an extended ferromagnetic film does not generate self-oscillatory magnetic dynamics but leads to reduction of the saturation magnetization. Here we report studies of the effect of spin torque on a system of intermediate dimensionality - a ferromagnetic nanowire. We observe coherent self-oscillations of magnetization in a ferromagnetic nanowire serving as the…
We study the ac current-driven domain wall motion in bilayer ferromagnetic metal (FM)/nonmagnetic metal (NM) nanowire. The solution of the modified Landau-Lifshitz-Gilbert equation including all the spin transfer torques is used to describe motion of the domain wall in presence of the spin Hall effect. We show that the domain wall center has second harmonic frequency response in addition to the known first harmonic excitation. In contrast to the experimentally observed second harmonic response in harmonic Hall measurements of spin-orbit torque in magnetic thin films, this second harmonic respo…
A numerical investigation is conducted for a single spin-torque oscillator under the non-linear region. A large angle precession triggers the generation of multiple modes without any feedbacked circuits and/or magnetic couplings with neighboring oscillators. Our simulations show that a single eigenmode of a given spin-torque oscillator can trigger up to six discrete modes as the sideband modes. These findings will offer the new functionality to the STO for developing the spintronic logic circuits.
We study the motion of several types of domain wall profiles in spin-orbit coupled magnetic nanowires and also the influence of spin-orbit interaction on the ferromagnetic resonance of uniform magnetic films. We extend previous studies by fully considering not only the field-like contribution from the spin-orbit torque, but also the recently derived Slonczewski-like spin-orbit torque. We show that the latter interaction affects both the domain wall velocity and the Walker breakdown threshold non-trivially, which suggests that it should be accounted in experimental data analysis. We find that t…
Spin-valve based nanojunctions incorporating Co|Ni multilayers with perpendicular anisotropy were used to study spin-torque driven ferromagnetic resonance (ST-FMR) in a nonlinear regime. Perpendicular field swept resonance lines were measured under a large amplitude microwave current excitation, which produces a large angle precession of the Co|Ni layer magnetization. With increasing rf power the resonance lines broaden and become asymmetric, with their peak shifting to lower applied field. A nonhysteretic step jump in ST-FMR voltage signal was also observed at high powers. The results are ana…
In systems with strong spin-orbit coupling, the relationship between spin-transfer torque and the divergence of the spin current is generalized to a relation between spin transfer torques, total angular momentum current, and mechanical torques. In ferromagnetic semiconductors, where the spin-orbit coupling is large, these considerations modify the behavior of the spin transfer torques. One example is a persistent spin transfer torque in a spin valve: the spin transfer torque does not decay away from the interface, but approaches a constant value. A second example is a mechanical torque at sing…
We report the thickness dependence of Dzyaloshinskii-Moriya interaction (DMI) and spin-orbit torques (SOTs) in Pt\Co(t)\AlOx, studied by current-induced domain wall (DW) motion and second-harmonic experiments. From the DW motion study, a monotonous decay of the effective DMI strength with an increasing Co thickness is observed, in agreement with a DMI originating at the Pt\Co interface. The study of the ferromagnetic thickness dependence of spin-orbit torques reveals a more complex behavior. The effective SOT-field driving the DW motion is found to initially increase and then saturate with an …
We consider theoretically the impact of Rashba spin-orbit coupling on spin torque oscillators (STOs) in synthetic ferromagnets and antiferromagnets that have either a bulk multilayer or a thin film structure. The synthetic magnets consist of a fixed polarizing layer and two free magnetic layers that interact through the Ruderman-Kittel-Kasuya-Yosida interaction. We determine analytically which collinear states along the easy axis that are stable, and establish numerically the phase diagram for when the system is in the STO mode and when collinear configurations are stable, respectively. It is …
We investigate spin-charge conversion phenomena in hybrid structures of topological insulator (TI) thin films and magnetic insulators. We find an anisotropic inverse spin-galvanic effect (ISGE) that yields a highly tunable spin-orbit torque (SOT). Concentrating on the quasiballistic limit, we also predict a giant anisotropic magnetoresistance (AMR) at low dopings. These effects, which have no counterparts in thick TIs, depend on the simultaneous presence of the hybridization between the surface states and the in-plane magnetization. Both the ISGE and AMR exhibit a strong dependence on the magn…
Magnetization reversal of a perpendicular ferromagnetic free layer by spin-orbit torque (SOT) is an attractive alternative to spin-transfer torque (STT) switching in magnetic random-access memory (MRAM) where the write process involves passing a high current across an ultrathin tunnel barrier. A small symmetry-breaking bias field is usually needed for deterministic SOT switching but it is impractical to generate the field externally for spintronic applications. Here, we demonstrate robust zero-field SOT switching of a perpendicular Co90Fe10 (CoFe) free layer where the symmetry is broken by mag…
Spin-orbit coupling in inversion-asymmetric magnetic crystals and structures has emerged as a powerful tool to generate complex magnetic textures, interconvert charge and spin under applied current, and control magnetization dynamics. Current-induced spin-orbit torques mediate the transfer of angular momentum from the lattice to the spin system, leading to sustained magnetic oscillations or switching of ferromagnetic as well as antiferromagnetic structures. The manipulation of magnetic order, domain walls and skyrmions by spin-orbit torques provides evidence of the microscopic interactions bet…
Several experimental techniques have been introduced in recent years in attempts to measure spin transfer torque in magnetic tunnel junctions (MTJs). The dependence of spin torque on bias is important for understanding fundamental spin physics in magnetic devices and for applications. However, previous techniques have provided only indirect measures of the torque and their results to date for the bias dependence are qualitatively and quantitatively inconsistent. Here we demonstrate that spin torque in MTJs can be measured directly by using time-domain techniques to detect resonant magnetic pre…
The Rashba-Edelstein effect stems from the interaction between the electron's spin and its momentum induced by spin-orbit interaction at an interface or a surface. It was shown that the inverse Rashba-Edelstein effect can be used to convert a spin- into a charge current. Here, we demonstrate that a Bi/Ag Rashba interface can even drive an adjacent ferromagnet to resonance. We employ a spin-torque ferromagnetic resonance excitation/detection scheme which was developed originally for a bulk spin-orbital effect, the spin Hall effect. In our experiment, the direct Rashba-Edelstein effect generates…
We measure the magnetic damping parameter a in thin film CoFeB and permalloy (Py) nanomagnets at room temperature using ferromagnetic resonance driven by microwave frequency spin-transfer torque. We obtain $α_{CoFeB} = 0.014 \pm 0.003$ and $α_{Py}=0.010 \pm 0.002$, values comparable to measurements for extended thin films, but significantly less than the effective damping determined previously for similar nanomagnets by fits to time-domain studies of large-angle magnetic excitations and magnetic reversal. The greater damping found for the large amplitude nanomagnet dynamics is attributed to th…
Spin torque and spin Hall effect nanooscillators generate high intensity spin wave auto oscillations on the nanoscale enabling novel microwave applications in spintronics, magnonics, and neuromorphic computing. For their operation, these devices require externally generated spin currents either from an additional ferromagnetic layer or a material with a high spin Hall angle. Here we demonstrate highly coherent field and current tunable microwave signals from nanoconstrictions in single 15 and 20 nm thick permalloy layers. Using a combination of spin torque ferromagnetic resonance measurements,…
We calculate the contribution to the spin transfer torque from sequential tunneling through impurities in a magnetic tunnel junction. For a junction with weakly polarized ferromagnetic contacts, the torque is found to be in the plane spanned by the magnetizations of the ferromagnetic contacts and proportional to $\sin θ$, where $θ$ is the angle between the magnetic moments. If the polarization is larger, the torque acquires a significant out-of-plane component and a different dependence on $θ$.
We present a circuit model to describe the electron transport through a domain wall in a ferromagnetic nanowire. The domain wall is treated as a coherent 4-terminal device with incoming and outgoing channels of spin up and down and the spin-dependent scattering in the vicinity of the wall is modelled using classical resistances. We derive the conductance of the circuit in terms of general conductance parameters for a domain wall. We then calculate these conductance parameters for the case of ballistic transport through the domain wall, and obtain a simple formula for the domain wall magnetores…
It is shown that the current-induced torques between a ferromagnetic layer and an antiferromagnetic layer with a compensated interface vanish when the ferromagnet is aligned with an axis of spin-rotation symmetry of the antiferromagnet. For properly chosen geometries this implies that the current induced torque can stabilize the out-of-plane (or hard axis) orientation of the ferromagnetic layer. This current-induced torque relies on phase coherent transport, and we calculate the robustness of this torque to phase breaking scattering. From this it is shown that the torque is not linearly depend…
Spin-transfer ferromagnetic resonance (ST-FMR) in symmetric magnetic tunnel junctions (MTJs) with a varied thickness of the MgO tunnel barrier (0.75 nm < $t_{MgO}$ < 1.05 nm) is studied using the spin-torque diode effect. The application of an RF current into nanosized MTJs generates a DC mixing voltage across the device when the frequency is in resonance with the resistance oscillations arising from the spin transfer torque. Magnetization precession in the free and reference layers of the MTJs is analyzed by comparing ST-FMR signals with macrospin and micromagnetic simulations. From ST-FMR sp…
Spin-torque driven ferromagnetic resonance (ST-FMR) is used to study magnetic excitations in Co/Ni synthetic layers confined in nanojunctions. Field swept ST-FMR measurements were conducted with a magnetic field applied perpendicular to the layer surface. The resonance lines were measured under low amplitude excitation in a linear response regime. The resulting resonance fields were compared with those obtained using conventional rf field driven FMR on extended films with the same Co/Ni layer structure. A lower resonance field is found in confined structures. The effect of both dipolar fields …
Extensive efforts have been devoted to the study of spin-orbit torque in ferromagnetic metal/heavy metal bilayers and exploitation of it for magnetization switching using an in-plane current. As the spin-orbit torque is inversely proportional to the thickness of the ferromagnetic layer, sizable effect has only been realized in bilayers with an ultrathin ferromagnetic layer. Here we demonstrate that, by stacking ultrathin Pt and FeMn alternately, both ferromagnetic properties and current induced spin-orbit torque can be achieved in FeMn/Pt multilayers without any constraint on its total thickne…
Ferromagnetic spin-valves and tunneling junctions are crucial for spintronics applications and are one of the most fundamental spintronics devices. Motivated by the potential unique advantages of antiferromagnets for spintronics, we theoretically study here junctions built out of non-collinear antiferromagnets. We demonstrate a large and robust magnetoresistance and spin-transfer torque capable of ultrafast switching between parallel and anti-parallel states of the junction. In addition, we show that the non-collinear order results in a spin-transfer torque that is in several key aspects diffe…
