We theoretically examine the spin-transfer torque in the presence of spin-orbit interaction (SOI) at impurities in a ferromagnetic metal on the basis of linear response theory. We obtained, in addition to the usual spin-transfer torque, a new contributioin $\sim {\bm j}_{\rm SH}^{\phantom{\dagger}} \cdot \nabla {\bm n}$ in the first order in SOI, where ${\bm j}_{\rm SH}^{\phantom{\dagger}}$ is the spin Hall current driven by an external electric field. This is a reaction to inverse spin Hall effect driven by spin motive force in a ferromagnet.
We theoretically study the spin current and spin-transfer torque generation in a conventional spin- valve hybrid structure of type ferromagnetic/normal metal/ferromagnetic (FM/NM/FM) made of the topological insulator (TI), in which a gate voltage is attached to the normal layer. We demonstrate the penetration of the spin-transfer torque into the right ferromagnetic layer and show that, unlike graphene spin-valve junction, the spin-transfer torque in TI is very sensitive to the chemical potential of the NM region. As an important result, by changing the chemical potential of the NM spacer and m…
Spin-orbit torques in bilayers of ferromagnetic and nonmagnetic materials hold promise for energy efficient switching of magnetization in nonvolatile magnetic memories. Previously studied spin Hall and Rashba torques originate from spin-orbit interactions within the nonmagnetic material and at the bilayer interface, respectively. Here we report a spin-orbit torque that arises from planar Hall current in the ferromagnetic material of the bilayer and acts as either positive or negative magnetic damping. This planar Hall torque exhibits unusual biaxial symmetry in the plane defined by the applied…
Using a multilayer structure containing (cobalt detector layer)/(copper spacer)/(Permalloy source layer), we show experimentally how the non-reorientable spin-orbit torque generated by the Permalloy source layer (the component of spin-orbit torque that does not change when the Permalloy magnetization is rotated) can be measured using spin-torque ferromagnetic resonance (ST-FMR) with lineshape analysis. We find that dynamic spin pumping between the magnetic layers exerts torques on the magnetic layers as large or larger than the spin-orbit torques, so that if dynamic spin pumping is neglected t…
Spin transfer torque in magnetic structures occurs when the transverse component of the spin current that flows from the nonmagnetic medium to ferromagnetic medium are absorbed by the interface. In this paper, considering the Rashba effect on semiconductor region, we have discussed the spin transfer torque in semiconductor/ferromagnetic structure and obtained the components of spin-current density for two models: (I)-single electron and (II)- the distribution of electrons. We have shown that whatever the difference between Fermi surfaces in semiconductor and Fermi spheres for the up and down s…
We study the spatial distribution of spin torque induced by a strong Rashba spin-orbit coupling (RSOC) in a ferromagnetic (FM) metal layer, using the Keldysh non-equilibrium Green's function method. In the presence of the s-d interaction between the non-equilibrium conduction electrons and the local magnetic moments, the RSOC effect induces a torque on the moments, which we term as the Rashba spin torque. A correlation between the Rashba spin torque and the spatial spin current is presented in this work, clearly mapping the spatial distribution of Rashba Spin torque in a nano-sized ferromagnet…
Spin orbit torques are of great interest for switching the magnetization direction in nanostructures, moving skyrmions and exciting spin waves. The standard method of determining their efficiency is by spin torque ferromagnetic resonance (ST-FMR), a technique that involves analyzing the resonance linewidth or lineshape. On microstuctures these two analysis methods are quite consistent. Here we present ST-FMR results on permalloy (Ni$_{80}$Fe$_{20}$) nanowires -- with widths varying from $150$ to 800 nm -- that show that the standard model used to analyze the resonance linewidth and lineshape g…
Spin accumulation and spin transfer torques induced by Spin Hall Effect in bi-layer structures comprising ferromagnetic and paramagnetic materials are theoretically investigated. The charge and spin diffusion equations taking into account spin-flip and spin Hall effect are formulated and solved analytically and numerically for in structures with simplified and complex geometry, respectively. It is demonstrated that spin torques could be efficiently produced by means of Spin Hall effect which may be further enhanced by modifying structure geometry.
We demonstrate that the spin Hall effect in a thin film with strong spin-orbit scattering can excite magnetic precession in an adjacent ferromagnetic film. The flow of alternating current through a Pt/NiFe bilayer generates an oscillating transverse spin current in the Pt, and the resultant transfer of spin angular momentum to the NiFe induces ferromagnetic resonance (FMR) dynamics. The Oersted field from the current also generates an FMR signal but with a different symmetry. The ratio of these two signals allows a quantitative determination of the spin current and the spin Hall angle.
In a ferromagnetic heterostructure, the interplay between a Rashba spin-orbit coupling and an exchange field gives rise to a current-driven spin torque. In a realistic device setup, we investigate the Rashba spin torque in the diffusive regime and report two major findings: (i) a nonvanishing torque exists at the edges of the device even when the magnetization and effective Rashba field are aligned; (ii) anisotropic spin relaxation rates driven by the Rashba spin-orbit coupling assign the spin torque a general expression ${\bm T}=T^y_{\para}(θ){\bm m}\times(\hat{\bm y}\times{\bm m})+T^y_{\bot}…
Spin-torque oscillators are strong candidates as nano-scale microwave generators and detectors. However, because of large amplitude-phase coupling (non-linearity), phase noise is enhanced over other linear auto-oscillators. One way to reduce nonlinearity is to use ferromagnetic layers as a resonator and excite them at localized spots, making a resonator-excitor pair. We investigated the excitation of oscillations in dipole-coupled ferromagnetic layers, driven by localized current at ferromagnetic nano-contacts. Oscillations possessed properties of optical-mode spin-waves and at low field ($\ap…
We have proposed a method to synchronize multiple spin-transfer torque oscillators based on spin pumping, inverse spin Hall, and spin Hall effects. The proposed oscillator system consists of a series of nano-magnets in junction with a normal metal with high spin-orbit coupling, and an accumulative feedback loop. We conduct simulations to demonstrate the effect of modulated charge currents in the normal metal due to spin pumping from each nano-magnet. We show that the interplay between the spin Hall effect and inverse spin Hall effect results in synchronization of the nano-magnets.
We investigate a possible correlation between spin orbit torque (SOT) and exchange-bias (EB) in IrMn-layer/ferromagnetic-ribbon heterostructure by performing magnetoimpedance (MI) measurements. To uncover this correlation, we benefit from EB training effect probed by MI effect at room temperature. A damping-like SOT driven by ac current through the antiferromagnetic IrMn applies to the ferromagnetic ribbon layer, determined by MI magnetic field and frequency sweeps. Importantly, magnitude of the SOT is observed to remain intact against EB training and decrease of EB through alternative magneti…
Spin-torque ferromagnetic resonance (ST-FMR) is a common method used to measure spin-orbit torques (SOTs) in heavy metal/ferromagnet bilayer structures. In the course of a measurement, other resonant processes such as spin pumping (SP) and heating can cause spin current or heat flows between the layers, inducing additional resonant voltage signals via the inverse spin Hall effect (ISHE) and Nernst effects (NE). In the standard ST-FMR geometry, these extra artifacts exhibit a dependence on the angle of an in-plane magnetic field that is identical to the rectification signal from the SOTs. We sh…
Current-induced spin torque and magnetization dynamics in the presence of spin Hall effect in magnetic textures is studied theoretically. The local deviation of the charge current gives rise to a current-induced spin torque of the form (1-β{\bf M})x[({\bf u}_0+α_H{\bf u}_0x\bf M})\cdot{\bm \nabla}]{\bf M}, where {\bf u}_0 is the direction of the injected current, α_H is the Hall angle and βis the non-adiabaticity parameter due to spin relaxation. Since α_H and βcan have a comparable order of magnitude, we show that this torque can significantly modify the current-induced dynamics of both trans…
When spin-orbit torques are measured using spin-torque ferromagnetic resonance (ST-FMR), two alternative ways of analyzing the results to extract the torque efficiencies -- lineshape analysis and analysis of the change in linewidth versus DC current -- often give inconsistent results. We identify a source for these inconsistencies. We show that fits of ST-FMR data to the standard analysis framework leave significant residuals that we identify as due to (i) current-induced excitations of a small volume of magnetic material with magnetic damping much larger than the bulk of the magnetic layer, t…
We study theoretically the detection and possible utilization of electric current-induced mechanical torques in ferromagnetic-normal metal heterostructures that are generated by spin-flip scattering or the absorption of transverse spin currents by a ferromagnet. To this end, we analyze the DC voltage signals over a spin valve that is driven by an AC current. In agreement with recent studies, this "rectification", measured as a function of AC frequency and applied magnetic field, contains important information on the magnetostatics and --dynamics. Subsequently, we show that the vibrations excit…
Spin torque from spin current applied to a nanoscale region of a ferromagnet can act as negative magnetic damping and thereby excite self-oscillations of its magnetization. In contrast, spin torque uniformly applied to the magnetization of an extended ferromagnetic film does not generate self-oscillatory magnetic dynamics but leads to reduction of the saturation magnetization. Here we report studies of the effect of spin torque on a system of intermediate dimensionality - a ferromagnetic nanowire. We observe coherent self-oscillations of magnetization in a ferromagnetic nanowire serving as the…
We study the motion of several types of domain wall profiles in spin-orbit coupled magnetic nanowires and also the influence of spin-orbit interaction on the ferromagnetic resonance of uniform magnetic films. We extend previous studies by fully considering not only the field-like contribution from the spin-orbit torque, but also the recently derived Slonczewski-like spin-orbit torque. We show that the latter interaction affects both the domain wall velocity and the Walker breakdown threshold non-trivially, which suggests that it should be accounted in experimental data analysis. We find that t…
Spin-valve based nanojunctions incorporating Co|Ni multilayers with perpendicular anisotropy were used to study spin-torque driven ferromagnetic resonance (ST-FMR) in a nonlinear regime. Perpendicular field swept resonance lines were measured under a large amplitude microwave current excitation, which produces a large angle precession of the Co|Ni layer magnetization. With increasing rf power the resonance lines broaden and become asymmetric, with their peak shifting to lower applied field. A nonhysteretic step jump in ST-FMR voltage signal was also observed at high powers. The results are ana…
We report an initial experimental survey of spin-Hall torques generated by the rare-earth metals Gd, Dy, Ho, and Lu, along with comparisons to first-principles calculations of their spin Hall conductivities. Using spin torque ferromagnetic resonance (ST-FMR) measurements and DC-biased ST-FMR, we estimate lower bounds for the spin-Hall torque ratio, $ξ_{SH}$, of $\approx$ 0.04 for Gd, $\approx$ 0.05 for Dy, $\approx$ 0.14 for Ho, and $\approx$ 0.014 for Lu. The variations among these elements are qualitatively consistent with results from first principles (density functional theory, DFT, in the…
In systems with strong spin-orbit coupling, the relationship between spin-transfer torque and the divergence of the spin current is generalized to a relation between spin transfer torques, total angular momentum current, and mechanical torques. In ferromagnetic semiconductors, where the spin-orbit coupling is large, these considerations modify the behavior of the spin transfer torques. One example is a persistent spin transfer torque in a spin valve: the spin transfer torque does not decay away from the interface, but approaches a constant value. A second example is a mechanical torque at sing…
We report the thickness dependence of Dzyaloshinskii-Moriya interaction (DMI) and spin-orbit torques (SOTs) in Pt\Co(t)\AlOx, studied by current-induced domain wall (DW) motion and second-harmonic experiments. From the DW motion study, a monotonous decay of the effective DMI strength with an increasing Co thickness is observed, in agreement with a DMI originating at the Pt\Co interface. The study of the ferromagnetic thickness dependence of spin-orbit torques reveals a more complex behavior. The effective SOT-field driving the DW motion is found to initially increase and then saturate with an …
A spin-torque ferromagnetic resonance study is performed in epitaxial $\mathrm{Fe / Ir_{15}Mn_{85}}$ bilayers with different Fe thicknesses. We measure a negative spin-Hall angle of a few percent in the antiferromagnetic IrMn in contrast to previously reported positive values. A large spin-orbit field with Rashba symmetry opposing the Oersted field is also present. Magnitudes of measured spin-orbit torques depend on the crystallographic direction of current and are correlated with the exchange bias direction set during growth. We suggest that the uncompensated moments at the Fe / IrMn interfac…
In ferromagnetic trilayers, a spin-orbit-induced spin current can have a spin polarization of which direction is deviated from that for the spin Hall effect. Recently, magnetization switching in ferromagnetic trilayers has been proposed and confirmed by the experiments. In this work, we theoretically and numerically investigate the switching current required for perpendicular magnetization switching in ferromagnetic trilayers. We confirm that the tilted spin polarization enables field-free deterministic switching at a lower current than conventional spin-orbit torque or spin-transfer torque sw…
We consider theoretically the impact of Rashba spin-orbit coupling on spin torque oscillators (STOs) in synthetic ferromagnets and antiferromagnets that have either a bulk multilayer or a thin film structure. The synthetic magnets consist of a fixed polarizing layer and two free magnetic layers that interact through the Ruderman-Kittel-Kasuya-Yosida interaction. We determine analytically which collinear states along the easy axis that are stable, and establish numerically the phase diagram for when the system is in the STO mode and when collinear configurations are stable, respectively. It is …
We investigate spin-charge conversion phenomena in hybrid structures of topological insulator (TI) thin films and magnetic insulators. We find an anisotropic inverse spin-galvanic effect (ISGE) that yields a highly tunable spin-orbit torque (SOT). Concentrating on the quasiballistic limit, we also predict a giant anisotropic magnetoresistance (AMR) at low dopings. These effects, which have no counterparts in thick TIs, depend on the simultaneous presence of the hybridization between the surface states and the in-plane magnetization. Both the ISGE and AMR exhibit a strong dependence on the magn…
Magnetization reversal of a perpendicular ferromagnetic free layer by spin-orbit torque (SOT) is an attractive alternative to spin-transfer torque (STT) switching in magnetic random-access memory (MRAM) where the write process involves passing a high current across an ultrathin tunnel barrier. A small symmetry-breaking bias field is usually needed for deterministic SOT switching but it is impractical to generate the field externally for spintronic applications. Here, we demonstrate robust zero-field SOT switching of a perpendicular Co90Fe10 (CoFe) free layer where the symmetry is broken by mag…
We study deterministic magnetic reversal of a perpendicularly magnetized Co layer in a Co/MgO/Ta nano-square driven by spin Hall torque from an in-plane current flowing in an underlying Pt layer. The rate-limiting step of the switching process is domain-wall (DW) depinning by spin Hall torque via a thermally-assisted mechanism that eventually produces full reversal by domain expansion. An in-plane applied magnetic field collinear with the current is required, with the necessary field scale set by the need to overcome DW chirality imposed by the Dzyaloshinskii-Moriya interaction. Once Joule hea…
Spin-orbit coupling in inversion-asymmetric magnetic crystals and structures has emerged as a powerful tool to generate complex magnetic textures, interconvert charge and spin under applied current, and control magnetization dynamics. Current-induced spin-orbit torques mediate the transfer of angular momentum from the lattice to the spin system, leading to sustained magnetic oscillations or switching of ferromagnetic as well as antiferromagnetic structures. The manipulation of magnetic order, domain walls and skyrmions by spin-orbit torques provides evidence of the microscopic interactions bet…
The Rashba-Edelstein effect stems from the interaction between the electron's spin and its momentum induced by spin-orbit interaction at an interface or a surface. It was shown that the inverse Rashba-Edelstein effect can be used to convert a spin- into a charge current. Here, we demonstrate that a Bi/Ag Rashba interface can even drive an adjacent ferromagnet to resonance. We employ a spin-torque ferromagnetic resonance excitation/detection scheme which was developed originally for a bulk spin-orbital effect, the spin Hall effect. In our experiment, the direct Rashba-Edelstein effect generates…
Spin torque and spin Hall effect nanooscillators generate high intensity spin wave auto oscillations on the nanoscale enabling novel microwave applications in spintronics, magnonics, and neuromorphic computing. For their operation, these devices require externally generated spin currents either from an additional ferromagnetic layer or a material with a high spin Hall angle. Here we demonstrate highly coherent field and current tunable microwave signals from nanoconstrictions in single 15 and 20 nm thick permalloy layers. Using a combination of spin torque ferromagnetic resonance measurements,…
We calculate the contribution to the spin transfer torque from sequential tunneling through impurities in a magnetic tunnel junction. For a junction with weakly polarized ferromagnetic contacts, the torque is found to be in the plane spanned by the magnetizations of the ferromagnetic contacts and proportional to $\sin θ$, where $θ$ is the angle between the magnetic moments. If the polarization is larger, the torque acquires a significant out-of-plane component and a different dependence on $θ$.
Ferromagnetic heterostructures provide an ideal platform to explore the nature of spin-orbit torques arising from the interplay mediated by itinerant electrons between a Rashba-type spin-orbit coupling and a ferromagnetic exchange interaction. For such a prototypic system, we develop a set of coupled diffusion equations to describe the diffusive spin dynamics and spin-orbit torques. We characterize the spin torque and its two prominent--out-of-plane and in-plane--components for a wide range of relative strength between the Rashba coupling and ferromagnetic exchange. The symmetry and angular de…
We demonstrate that spin-orbit coupled electrons in a magnetically doped system exert a spin torque on the local magnetization, without a flowing current, when the chemical potential is modulated in a magnetic field. The spin torque is proportional to the anomalous Hall conductivity, and its effective field strength may overcome the Zeeman field. Using this effect, the direction of the local magnetization is switched by gate control in a thin film. This charge-induced spin torque is essentially an equilibrium effect, in contrast to the conventional current-induced spin-orbit torque, and, thus,…
A complete set of the generalized drift-diffusion equations for a coupled charge and spin dynamics in ferromagnets in the presence of extrinsic spin-orbit coupling is derived from the quantum kinetic approach, covering major transport phenomena, such as the spin and anomalous Hall effects, spin swapping, spin precession and relaxation processes. We argue that the spin swapping effect in ferromagnets is enhanced due to spin polarization, while the overall spin texture induced by the interplay of spin-orbital and spin precessional effects displays a complex spatial dependence that can be exploit…
This paper reviews the state of the art in spin-torque and spin Hall effect driven nano-oscillators. After a brief introduction to the underlying physics, the authors discuss different implementations of these oscillators, their functional properties in terms of frequency range, output power, phase noise, and modulation rates, and their inherent propensity for mutual synchronization. Finally, the potential for these oscillators in a wide range of applications, from microwave signal sources and detectors to neuromorphic computation elements, is discussed together with the specific electronic ci…
We present measurements of spin orbit torques generated by Ir as a function of film thickness in sputtered Ir/CoFeB and Ir/Co samples. We find that Ir provides a damping-like component of spin orbit torque with a maximum spin torque conductivity 1.4e5 in SI unit and a maximum spin-torque efficiency of 0.04, which is sufficient to drive switching in an 0.8 nm film of CoFeB with perpendicular magnetic anisotropy. We also observe a surprisingly large field like spin orbit torque. Measurements as a function of Ir thickness indicate a substantial contribution to the FLT from an interface mechanism …
It is shown that the current-induced torques between a ferromagnetic layer and an antiferromagnetic layer with a compensated interface vanish when the ferromagnet is aligned with an axis of spin-rotation symmetry of the antiferromagnet. For properly chosen geometries this implies that the current induced torque can stabilize the out-of-plane (or hard axis) orientation of the ferromagnetic layer. This current-induced torque relies on phase coherent transport, and we calculate the robustness of this torque to phase breaking scattering. From this it is shown that the torque is not linearly depend…
We report measurements of the spin torque efficiencies in perpendicularly-magnetized Pt/Co bilayers where the Pt resistivity $ρ_{Pt}$ is strongly dependent on thickness $t_{Pt}$ . The damping-like spin Hall torque efficiency per unit current density, $ξ^j_{DL}$ , varies significantly with $t_{Pt}$, exhibiting a peak value $ξ^j_{DL}=0.12$ at $t_{Pt} = 2.8 - 3.9$ nm. In contrast, $ξ^j_{DL}/ρ_{Pt}$ increases monotonically with $t_{Pt}$ and saturates for $t_{Pt} > 5$ nm, consistent with an intrinsic spin Hall effect mechanism, in which $ξ^j_{DL}$ is enhanced by an increase in $ρ_{Pt}$ . Assuming t…
We study the dynamics of a quantum spin Hall edge coupled to a magnet with its own dynamics. Using spin transfer torque principles, we analyze the interplay between spin currents in the edge state and dynamics of the axis of the magnet, and draw parallels with circuit analogies. As a highlighting feature, we show that while coupling to a magnet typically renders the edge state insulating by opening a gap, in the presence of a small potential bias, spin-transfer torque can restore perfect conductance by transferring angular momentum to the magnet. In the presence of interactions within the edge…
The critical current needed to destabilize the magnetization of a perpendicular ferromagnet via the spin Hall effect is studied. Both the dampinglike and fieldlike torques associated with the spin current generated by the spin Hall effect is included in the Landau-Lifshitz-Gilbert equation to model the system. In the absence of the fieldlike torque, the critical current is independent of the damping constant and is much larger than that of conventional spin torque switching of collinear magnetic systems, as in magnetic tunnel junctions. With the fieldlike torque included, we find that the crit…
Ferromagnetic spin-valves and tunneling junctions are crucial for spintronics applications and are one of the most fundamental spintronics devices. Motivated by the potential unique advantages of antiferromagnets for spintronics, we theoretically study here junctions built out of non-collinear antiferromagnets. We demonstrate a large and robust magnetoresistance and spin-transfer torque capable of ultrafast switching between parallel and anti-parallel states of the junction. In addition, we show that the non-collinear order results in a spin-transfer torque that is in several key aspects diffe…
This article discusses the spin-torque effect in a spin-valve made out of two ferromagnetic leads connected through a coherent nanoconductor (NC), in the limit where a single channel of the NC lies near the Fermi energy of the leads. Due to quantum interferences inside the NC, the spin-torque presents clear qualitative differences with respect to the case of a multichannel disordered spin-valve. In particular, it can be modulated with the NC gate voltage. In principle, this modulation can be observed experimentally, assuming that the spin-torque affects a ferromagnetic nano-domain in direct co…
In the normal metal/ferromagnetic insulator bilayer (such as Pt/Y$_{3}$Fe$_{5}$O$_{12}$) and the normal metal/ferromagnetic metal/oxide trilayer (such as Pt/Co/AlO$_{x}$) where spin injection and ejection are achieved by the spin Hall effect in the normal metal, we propose a minimal model based on quantum tunneling of spins to explain the spin-transfer torque and spin pumping caused by the spin Hall effect. The ratio of their damping-like to field-like component depends on the tunneling wave function that is strongly influenced by generic material properties such as interface $s-d$ coupling, i…
The electrical detection of spin torque ferromagnetic resonance (st-FMR) is becoming a popular method for measuring the spin-Hall angle of heavy metals (HM). However, various sensible analysis on the same material with either the same or different experimental setups yielded different spin-Hall angles with large discrepancy, indicating some missing ingredients in our current understanding of st-FMR. Here we carry out a careful analysis of electrical signals of the st-FMR in a HM/ferromagnet (HM/FM) bilayer with an arbitrary magnetic anisotropy. The FM magnetization is driven by two radio-frequ…
We demonstrate excitation of ferromagnetic resonance in CoFeB/MgO/CoFeB magnetic tunnel junctions (MTJs) by the combined action of voltage-controlled magnetic anisotropy (VCMA) and spin transfer torque (ST). Our measurements reveal that GHz-frequency VCMA torque and ST in low-resistance MTJs have similar magnitudes, and thus that both torques are equally important for understanding high-frequency voltage-driven magnetization dynamics in MTJs. As an example, we show that VCMA can increase the sensitivity of an MTJ-based microwave signal detector to the sensitivity level of semiconductor Schottk…
Current-induced spin torques in layered magnetic heterostructures have many commonalities across broad classes of magnetic materials. These include not only collinear ferromagnets, ferrimagnets, and antiferromagnets, but also more complex noncollinear spin systems. We develop a general Lagrangian-Rayleigh approach for studying the role of dissipative torques, which can pump energy into long-wavelength magnetic dynamics, causing dynamic instabilities. While the Rayleigh structure of such torques is similar for different magnetic materials, their consequences depend sensitively on the nature of …
