Spin-based silicon quantum electronic circuits offer a scalable platform for quantum computation, combining the manufacturability of semiconductor devices with the long coherence times afforded by spins in silicon. Advancing from current few-qubit devices to silicon quantum processors with upwards of a million qubits, as required for fault-tolerant operation, presents several unique challenges, one of the most demanding being the ability to deliver microwave signals for large-scale qubit control. Here we demonstrate a potential solution to this problem by using a three-dimensional dielectric resonator to broadcast a global microwave signal across a quantum nanoelectronic circuit. Critically, this technique utilizes only a single microwave source and is capable of delivering control signals to millions of qubits simultaneously. We show that the global field can be used to perform spin resonance of single electrons confined in a silicon double quantum dot device, establishing the feasibility of this approach for scalable spin qubit control.
In this paper, we review the 1/f-type noise properties of nanoelectronic devices focusing on three demonstrative platforms: resistive switching memories, graphene nanogaps and single-molecule nanowires. The functionality of such ultrasmall devices is confined to an extremely small volume, where bulk considerations on the noise loose their validity: the relative contribution of a fluctuator heavily depends on its distance from the device bottleneck, and the noise characteristics are sensitive to the nanometer-scale device geometry and the details of the mostly non-classical transport mechanism.…
In this paper we present NANOTCAD2D, a code for the simulation of the electrical properties of semiconductor-based nanoelectronic devices and structures in two-dimensional domains. Such code is based on the solution of the Poisson/Schrödinger equation with density functional theory and of the continuity equation of the ballistic current. NANOTCAD2D can be applied to structures fabricated on III-IV, strained-silicon and silicon-germanium heterostructures, CMOS structures, and can easily be extended to new materials. In particular, in the case of SiGe heterostructures, it computes the effects of…
We investigate electrical conduction through individual oligopeptide molecules thiol-bonded between gold nanocontacts using ab initio and semi-empirical techniques. Our theory explains for the first time these molecules' experimentally observed current-voltage characteristics, including both the magnitude and rectification of the current, and uses no adjustable parameters. We identify the mechanism of the observed current rectification, and predict that it will result in negative differential resistance at moderate biases. Our findings open the way to the realization of protein-based nanoelect…
We derive simple expressions that relate the noise and correlation properties of a general time-dependent quantum conductor to the wave functions of the system. The formalism provides a practical route for numerical calculations of quantum noise in an externally driven system. We illustrate the approach with numerical calculations of the noise properties associated to a voltage pulse applied on a one-dimensional conductor. The methodology is however fully general and can be used for a large class of mesoscopic conductors.
We argue that twisted graphene nanoribbons subjected to a transverse electric field can operate as a variety of nanoelectronic devices, such as tunable tunnel diodes with current-voltage characteristics controlled by the transverse field. Using the density-functional tight-binding method to address the effects of mechanical strain induced by the twisting, we show that the electronic transport properties remain almost unaffected by the strain in relevant cases and propose a simplified tight-binding model which gives reliable results. The transverse electric field creates a periodic electrostati…
Nanoscale electronic devices are of great interest for all kinds of applications like switching, energy conversion and sensing. The objective of this chapter, however, is not to discuss specific devices or applications. Rather it is to convey the conceptual framework that has emerged over the last twenty years, which is important not only because of the practical insights it provides into the design of nanoscale devices, but also because of the conceptual insights it affords regarding the meaning of resistance and the essence of all non-equilibrium phenomena in general. We present a unified de…
In quantum nanoelectronics, numerical simulations have become an ubiquitous tool. Yet the comparison with experiments is often done at a qualitative level or restricted to a single device with a handful of fitting parameters. In this work, we assess the predictive power of these simulations by comparing the results of a single model with a large experimental data set of 110 devices with 48 different geometries. The devices are quantum point contacts of various shapes and sizes made with electrostatic gates deposited on top of a high mobility GaAs/GaAlAs two dimensional electron gas. We study t…
We demonstrate significant cooling of electrons in a nanostructure below 10 mK by demagnetisation of thin-film copper on a silicon chip. Our approach overcomes the typical bottleneck of weak electron-phonon scattering by coupling the electrons directly to a bath of refrigerated nuclei, rather than cooling via phonons in the host lattice. Consequently, weak electron-phonon scattering becomes an advantage. It allows the electrons to be cooled for an experimentally useful period of time to temperatures colder than the dilution refrigerator platform, the incoming electrical connections, and the ho…
We present a sensitive, tunable radio-frequency resonator designed to detect reactive changes in nanoelectronic devices down to dilution refrigerator temperatures. The resonator incorporates GaAs varicap diodes to allow electrical tuning of the resonant frequency and the coupling to the input line. We find a resonant frequency tuning range of 8.4 MHz at 55 mK that increases to 29 MHz at 1.5 K. To assess the impact on performance of different tuning conditions, we connect a quantum dot in a silicon nanowire field-effect transistor to the resonator, and measure changes in the device capacitance …
Molecular electronics is envisioned as a promising candidate for the nanoelectronics of the future. More than a possible answer to ultimate miniaturization problem in nanoelectronics, molecular electronics is foreseen as a possible way to assemble a large numbers of nanoscale objects (molecules, nanoparticules, nanotubes and nanowires) to form new devices and circuit architectures. It is also an interesting approach to significantly reduce the fabrication costs, as well as the energetical costs of computation, compared to usual semiconductor technologies. Moreover, molecular electronics is a f…
Here we review recent progress in cooling micro/nanoelectronic devices significantly below 10 mK. A number of groups worldwide are working to produce sub-millikelvin on-chip electron temperatures, motivated by the possibility of observing new physical effects and improving the performance of quantum technologies, sensors and metrological standards. The challenge is a longstanding one, with the lowest reported on-chip electron temperature having remained around 4 mK for more than 15 years. This is despite the fact that microkelvin temperatures have been accessible in bulk materials since the mi…
Through the Non-Equilibrium Green's Function (NEGF) formalism, quantum-scale device simulation can be performed with the inclusion of electron-phonon scattering. However, the simulation of realistically sized devices under the NEGF formalism typically requires prohibitive amounts of memory and computation time. Two of the most demanding computational problems for NEGF simulation involve mathematical operations with structured matrices called semiseparable matrices. In this work, we present parallel approaches for these computational problems which allow for efficient distribution of both memor…
The route to reliable quantum nanoelectronic devices hinges on precise control of the electrostatic environment. For this reason, accurate methods for electrostatic simulations are essential in the design process. The most widespread methods for this purpose are the Thomas-Fermi approximation, which provides quick approximate results, and the Schrödinger-Poisson method, which better takes into account quantum mechanical effects. The mentioned methods suffer from relevant shortcomings: the Thomas-Fermi method fails to take into account quantum confinement effects that are crucial in heterostruc…
Electronic transport in semiconducting single-wall carbon nanotubes is studied by combined scanning gate microscopy and scanning impedance microscopy (SIM). Depending on the probe potential, SIM can be performed in both invasive and non-invasive mode. High-resolution imaging of the defects is achieved when the probe acts as a local gate and simultaneously an electrostatic probe of local potential. A class of weak defects becomes observable even if they are located in the vicinity of strong defects. The imaging mechanism of tip-gating scanning impedance microscopy is discussed.
Quantum point contacts (QPCs) have shown promise as nanoscale spin-selective components for spintronic applications and are of fundamental interest in the study of electron many-body effects such as the 0.7 x 2e^2/h anomaly. We report on the dependence of the 1D Lande g-factor g* and 0.7 anomaly on electron density and confinement in QPCs with two different top-gate architectures. We obtain g* values up to 2.8 for the lowest 1D subband, significantly exceeding previous in-plane g-factor values in AlGaAs/GaAs QPCs, and approaching that in InGaAs/InP QPCs. We show that g* is highly sensitive to …
As semiconductor devices scale to new dimensions, the materials and designs become more dependent on atomic details. NEMO5 is a nanoelectronics modeling package designed for comprehending the critical multi-scale, multi-physics phenomena through efficient computational approaches and quantitatively modeling new generations of nanoelectronic devices as well as predicting novel device architectures and phenomena. This article seeks to provide updates on the current status of the tool and new functionality, including advances in quantum transport simulations and with materials such as metals, top…
Electron-phase modulation in magnetic and electric fields will be presented in In_(0.75)Ga_(0.25)As Aharonov-Bohm (AB) rings. The zero Schottky barrier of this material made it possible to nanofabricate devices with radii down to below 200 nm without carrier depletion. We shall present a fabrication scheme based on wet and dry etching that yielded excellent reproducibility, very high contrast of the oscillations and good electrical gating. The operation of these structures is compatible with closed-cycle refrigeration and suggests that this process can yield coherent electronic circuits that d…
We report the cooling of electrons in nanoelectronic Coulomb blockade thermometers below 4 mK. Above 7 mK the devices are in good thermal contact with the environment, well isolated from electrical noise, and not susceptible to self-heating. This is attributed to an optimised design that incorporates cooling fins with a high electron-phonon coupling and on-chip electronic filters, combined with a low-noise electronic measurement setup. Below 7 mK the electron temperature is seen to diverge from the ambient temperature. By immersing a Coulomb Blockade Thermometer in the 3He/4He refrigerant of a…
I review the advancements of atomic scale nanoelectronics towards quantum neuromorphics. First, I summarize the key properties of elementary combinations of few neurons, namely long-- and short--term plasticity, spike-timing dependent plasticity (associative plasticity), quantumness and stochastic effects, and their potential computational employment. Next, I review several atomic scale device technologies developed to control electron transport at the atomic level, including single atom implantation for atomic arrays and CMOS quantum dots, single atom memories, Ag$_2$S and Cu$_2$S atomic swit…
The unconventional properties of graphene, with a massless Dirac band dispersion and large coherence properties, have raised a large interest for applications in nanoelectronics. In this work, we emphasize that graphene two dimensional character combined with current standard lithography processes allow to achieve devices smaller than the Dirac electrons wavelength. In this regime, we demonstrate that the electronic properties present deep analogies with subwavelength optics phenomena. We describe the rich transport physics in graphene-based nanodevices through optical analogies: From the Beth…
Fragile quantum effects such as single electron charging in quantum dots or macroscopic coherent tunneling in superconducting junctions are the basis of modern quantum technologies. These phenomena can only be observed in devices where the characteristic spacing between energy levels exceeds the thermal energy, $k_\textrm{B}T$, demanding effective refrigeration techniques for nanoscale electronic devices. Commercially available dilution refrigerators have enabled typical electron temperatures in the $10$ to $100\,$mK regime, however indirect cooling of nanodevices becomes inefficient due to st…
We report on the transport properties of novel carbon nanostructures made of partially unzipped carbon nanotubes, which can be regarded as a seamless junction of a tube and a nanoribbon. We find that graphene nanoribbons act at certain energy ranges as a perfect valley filters for carbon nanotubes, with the maximum possible conductance. Our results show that a partially unzipped carbon nanotube is a magnetoresistive device, with a very large value of the magnetoresistance. We explore the properties of several structures combining nanotubes and graphene nanoribbons, demonstrating that they beha…
Graphene's original promise to succeed silicon faltered due to pervasive edge disorder in lithographically patterned deposited graphene and the lack of a new electronics paradigm. Here we demonstrate that the annealed edges in conventionally patterned graphene epitaxially grown on a silicon carbide substrate (epigraphene) are stabilized by the substrate and support a protected edge state. The edge state has a mean free path that is greater than 50 microns, 5000 times greater that the bulk states and involves a theoretically unexpected Majorana-like zero-energy non-degenerate quasiparticle that…
We present a simple, general purpose, quantum Monte-Carlo algorithm for out-of-equilibrium interacting nanoelectronics systems. It allows one to systematically compute the expansion of any physical observable (such as current or density) in powers of the electron-electron interaction coupling constant $U$. It is based on the out-of-equilibrium Keldysh Green's function formalism in real-time and corresponds to evaluating all the Feynman diagrams to a given order $U^n$ (up to $n=15$ in the present work). A key idea is to explicitly sum over the Keldysh indices in order to enforce the unitarity o…
The frontiers of quantum electronics have been linked to the discovery of new refrigeration methods since the discovery of superconductivity at a temperature around $4\,$K, enabled by the liquefaction of helium. Since then, the advances in cryogenics led to discoveries such as the quantum Hall effect and new technologies like superconducting and semiconductor quantum bits. Presently, nanoelectronic devices typically reach electron temperatures around $10\,$mK to $100\,$mK by commercially available dilution refrigerators. However, cooling electrons via the encompassing lattice vibrations, or ph…
The spin of an electron or a nucleus in a semiconductor [1] naturally implements the unit of quantum information -- the qubit -- while providing a technological link to the established electronics industry [2]. The solid-state environment, however, may provide deleterious interactions between the qubit and the nuclear spins of surrounding atoms [3], or charge and spin fluctuators in defects, oxides and interfaces [4]. For group IV materials such as silicon, enrichment of the spin-zero 28-Si isotope drastically reduces spin-bath decoherence [5]. Experiments on bulk spin ensembles in 28-Si cryst…
The isolation of energetically persistent scattering pathways from the resonant manifold of an open electron billiard in the deep quantum regime is demonstrated. This enables efficient conductance switching at varying temperature and Fermi velocity, using a weak magnetic field. The effect relies on the interplay between magnetic focusing and soft-wall confinement, which rescale the scattering pathways and decouple quasi-bound states from the attached leads, the field-free motion being forwardly collimated. The mechanism proves robust against billiard shape variations and qualifies as a nanoele…
Searching of optimal parameters of nanoelectronic devices is a primal problem in their modeling. We solve this problem on example of the electron ballistic switch in quantum network model. For this purpose, we use a computing scheme in which closed channels are taking into account. It allows calculating correctly a scattering matrix of the switch and, consequently, the electric currents flowing through it. Without losing generality, we consider model of two-junction switch at room temperature. Its character is localization of the controlling electric field in the domain before branching. We op…
Since any realistic electronic device has some degree of disorder, predicting disorder effects in quantum transport is a critical problem. Here we report the theory of nonequilibrium coherent potential approximation (NECPA) for analyzing disorder effects in nonequilibrium quantum transport of nanoelectronic devices. The NECPA is formulated by contour ordered nonequilibrium Green's function (NEGF) where the disorder average is carried out within the coherent potential approximation on the complex-time contour. We have derived a set of new rules that supplement the celebrated Langreth theorem an…
Temperature is a fundamental parameter in the study of physical phenomena. At the nanoscale, local temperature differences can be harnessed to design novel thermal nanoelectronic devices or test quantum thermodynamical concepts. Determining temperature locally is hence of particular relevance. Here, we present a primary electron thermometer that allows probing the local temperature of a single electron reservoir in single-electron devices. The thermometer is based on cyclic electron tunneling between a system with discrete energy levels and a single electron reservoir. When driven at a finite …
Electronic transport properties through some model quantum systems are re-visited. A simple tight-binding framework is given to describe the systems where all numerical calculations are made using the Green's function formalism. First, we demonstrate electronic transport in four different polycyclic hydrocarbon molecules, namely, benzene, napthalene, anthracene and tetracene. It is observed that electron conduction through these molecular wires is highly sensitive to molecule-to-electrode coupling strength and quantum interference of electronic waves passing through different branches of the m…
Understanding of the electrical contact properties of semiconductor nanowire (NW) field effect transistors (FETs) plays a crucial role in employing semiconducting NWs as building blocks for future nanoelectronic devices and in the study of fundamental physics problems. Here, we report on a study of the contact properties of Ti/Au, a widely used contact metal combination, to individual InSb NWs via both two-probe and four-probe transport measurements. We show that a Schottky barrier of height $Φ_{\rm{SB}}\sim20\ \rm{meV}$ is present at the metal-InSb NW interfaces and its effective height is ga…
We report on our recent efforts to perform realistic simulations of large quantum devices in the time domain. In contrast to d.c. transport where the calculations are explicitly performed at the Fermi level, the presence of time-dependent terms in the Hamiltonian makes the system inelastic so that it is necessary to explicitly enforce the Pauli principle in the simulations. We illustrate our approach with calculations for a flying qubit interferometer, a nanoelectronic device that is currently under experimental investigation. Our calculations illustrate the fact that many degrees of freedom (…
We demonstrate high yield fabrication of field effect transistors (FET) using chemically reduced graphene oxide (RGO) sheets suspended in water assembled via dielectrophoresis. The two terminal resistances of the devices were improved by an order of magnitude upon mild annealing at 200 0C in Ar/H2 environment for 1 hour. With the application of a backgate voltage, all of the devices showed FET behavior with maximum hole and electron mobilities of 4.0 and 1.5 cm2/Vs respectively. This study shows promise for scaled up fabrication of graphene based nanoelectronic devices.
We characterize germanium-vacancy GeVn complexes in silicon using first-principles Density Functional Theory calculations with screening-dependent hybrid functionals. We report on the local geometry and electronic excited states of these defects, including charge transition levels corresponding to the addition of one or more electrons to the defect. Our main theoretical result concerns the GeV complex, which we show to give rise to two excited states deep in the gap, at -0.51 and -0.35 eV from the conduction band, consistently with the available spectroscopic data. The adopted theoretical sche…
We show that graphene-based quantum pumps can tap into evanescent modes, which penetrate deeply into the device as a consequence of Klein tunneling. The evanescent modes dominate pumping at the Dirac point, and give rise to a universal response under weak driving for short and wide pumps, in close analogy to their role for the minimal conductivity in ballistic transport. In contrast, evanescent modes contribute negligibly to normal pumps. Our findings add a new incentive for the exploration of graphene-based nanoelectronic devices.
We introduce an inverse design framework based on artificial neural networks, genetic algorithms, and tight-binding calculations, capable to optimize the very large configuration space of nanoelectronic devices. Our non-linear optimization procedure operates on trial Hamiltonians through superoperators controlling growth policies of regions of distinct doping. We demonstrate that our algorithm optimizes the doping of graphene-based three-terminal devices for valleytronics applications, monotonously converging to synthesizable devices with high merit functions in a few thousand evaluations (out…
Deep Learning Accelerated Quantum Transport Simulations in Nanoelectronics: From Break Junctions to Field-Effect Transistors
School of Artificial Intelligence and Data Science, University of Science and Technology of China（中国科学技术大学人工智能与数据科学学院）；AI for Science Institute（AI for Science研究院）；Centre for Nanoscale Science and Technology, Academy for Advanced Interdisciplinary Studies, Peking University（北京大学纳米尺度科学与技术中心）；Department of Physics, McGill University（麦吉尔大学物理系）；Key Laboratory for the Physics and Chemistry of Nanodevices, School of Electronics, Peking University（北京大学纳米器件物理与化学重点实验室）；DP Technology（DP技术）；Suzhou Institute for Advanced Research, University of Science and Technology of China（中国科学技术大学苏州市先进研究所）；Suzhou Big Data & AI Research and Engineering Center（苏州市大数据与人工智能研究与工程中心）
Controlled placement of nanomaterials at predefined locations with nanoscale precision remains among the most challenging problems that inhibit their large-scale integration in the field of semiconductor process technology. Methods based on surface functionalization have a drawback where undesired chemical modifications can occur and deteriorate the deposited material. The application of electric-field assisted placement techniques eliminates the element of chemical treatment; however, it requires an incorporation of conductive placement electrodes that limit the performance, scaling, and dens…
Black phosphorous (BP) is is recently unveiled as a promising two-dimensional direct bandgap semiconducting material. Here, we report the ambipolar field effect transistor behavior of multilayers of BP with ferromagnetic tunnel contacts. We observe a reduced of Schottky barrier < 50 meV by using TiO${_2}$/Co contacts, which could be further tuned by gate voltages. Eminently a good transistor performance is achieved in BP devices, with drain current modulation on the order of four to six orders of magnitude. The charge carrier mobility is found to be $\sim$ 155 and 0.18 cm${^2}$ V${^{-1}}$ s${^…
As a general trend, nanoelectronics experiments are shifting toward frequencies so high that they become comparable to the device's internal characteristic time scales, resulting in new opportunities for studying the dynamical aspects of quantum mechanics. Here we theoretically study how a voltage pulse (in the quantum regime) propagates through an electronic interferometer (Fabry- Perot or Mach-Zehnder). We show that extremely fast pulses provide a conceptually new tool for manipulating quantum information: the possibility to dynamically engineer the interference pattern of a quantum system. …
One of the most important problems in nanoelectronic device theory is to estimate how fast or how slow a quantum device can turn on/off a current. For an arbitrary noninteracting phase-coherent device scattering region connected to the outside world by leads, we have derived an exact solution for the nonequilibrium, nonlinear, and time-dependent current driven by both up- and down-step pulsed voltages. Our analysis is based on the Keldysh nonequilibrium Green's functions formalism where the electronic structure of the leads as well as the scattering region are treated on an equal footing. A mo…
Graphene nanoribbons (GNRs) are a novel and intriguing class of materials in the field of nanoelectronics, since their properties, solely defined by their width and edge type, are controllable with high precision directly from synthesis. Here we study the correlation between the GNR structure and the corresponding device electrical properties. We investigated a series of field effect devices consisting of a film of armchair GNRs with different structures (namely width and/or length) as the transistor channel, contacted with narrowly spaced graphene sheets as the source-drain electrodes. By ana…
Integrating high-mobility graphene grown by chemical vapor deposition (CVD) into spin transport devices is one of the key tasks in graphene spintronics. We use a van der Waals pickup technique to transfer CVD graphene by hexagonal boron nitride (hBN) from the copper growth substrate onto predefined Co/MgO electrodes to build inverted spin valve devices. Two approaches are presented: (i) a process where the CVD-graphene/hBN stack is first patterned into a bar and then transferred by a second larger hBN crystal onto spin valve electrodes and (ii) a direct transfer of a CVD-graphene/hBN stack. We…
We have produced ultrathin epitaxial graphite films which show remarkable 2D electron gas (2DEG) behavior. The films, composed of typically 3 graphene sheets, were grown by thermal decomposition on the (0001) surface of 6H-SiC, and characterized by surface-science techniques. The low-temperature conductance spans a range of localization regimes according to the structural state (square resistance 1.5 kOhm to 225 kOhm at 4 K, with positive magnetoconductance). Low resistance samples show characteristics of weak-localization in two dimensions, from which we estimate elastic and inelastic mean fr…
Using density functional theory and nonequilibrium Greens functions-based methods we investigated the electronic and transport properties of monolayer TiS3 pn-junction. We constructed a lateral pn-junction in monolayer TiS3 by using Li and F adatoms. An applied bias voltage caused significant variability in the electronic and transport properties of the TiS3 pn-junction. In addition, spin dependent current-voltage characteristics of the constructed TiS3 pn-junction were analyzed. Important device characteristics were found such as negative differential resistance and rectifying diode behaviors…
The use of two truly two-dimensional gapless semiconductors, monolayer and bilayer graphene, as current-carrying components in field-effect transistors (FET) gives access to new types of nanoelectronic devices. Here, we report on the development of graphene-based FETs containing two decoupled graphene monolayers manufactured from a single one folded during the exfoliation process. The transport characteristics of these newly-developed devices differ markedly from those manufactured from a single-crystal bilayer. By analyzing Shubnikov-de Haas oscillations, we demonstrate the possibility to ind…
Nonreciprocal effects in nanoelectronic devices offer unique possibilities for manipulating electron transport and engineering quantum electronic circuits for information processing purposes. However, a lack of rigorous theoretical tools is hindering this development. Here, we provide a general input-output description of nonreciprocal transport in solid-state quantum dot architectures, based on quantum optomechanical analogs. In particular, we break reciprocity between coherently-coupled quantum dots by dissipation-engineering in which these (so-called) primary dots are mutually coupled to au…
In this paper we review the theory of silicon nanowires. We focus on nanowires with diameters below 10 nm, where quantum effects become important and the properties diverge significantly from those of bulk silicon. These wires can be efficiently treated within electronic structure simulation methods and will be among the most important functional blocks of future nanoelectronic devices. Firstly, we review the structural properties of silicon nanowires, emphasizing the close connection between the growth orientation, the cross-section and the bounding facets. Secondly, we discuss the electronic…
Phonon-assisted tunneling in a double barrier resonant tunneling device can be seen as a resonance in the electron-phonon Fock space which is tuned by the applied voltage. We show that the geometrical parameters can induce a symmetry condition in this space that can strongly enhance the emission of longitudinal optical phonons. For devices with thin emitter barriers this is achieved by a wider collector's barrier.
