Here we review recent progress in cooling micro/nanoelectronic devices significantly below 10 mK. A number of groups worldwide are working to produce sub-millikelvin on-chip electron temperatures, motivated by the possibility of observing new physical effects and improving the performance of quantum technologies, sensors and metrological standards. The challenge is a longstanding one, with the lowest reported on-chip electron temperature having remained around 4 mK for more than 15 years. This is despite the fact that microkelvin temperatures have been accessible in bulk materials since the mid 20th century. In this review we describe progress made in the last five years using new cooling techniques. Developments have been driven by improvements in the understanding of nanoscale physics, material properties and heat flow in electronic devices at ultralow temperatures, and have involved collaboration between universities and institutes, physicists and engineers. We hope that this review will serve as a summary of the current state-of-the-art, and provide a roadmap for future developments. We focus on techniques that have shown, in experiment, the potential to reach sub-millikelvin electron temperatures. In particular, we focus on on-chip demagnetisation refrigeration. Multiple groups have used this technique to reach temperatures around 1 mK, with a current lowest temperature below 0.5 mK.
We demonstrate significant cooling of electrons in a nanostructure below 10 mK by demagnetisation of thin-film copper on a silicon chip. Our approach overcomes the typical bottleneck of weak electron-phonon scattering by coupling the electrons directly to a bath of refrigerated nuclei, rather than cooling via phonons in the host lattice. Consequently, weak electron-phonon scattering becomes an advantage. It allows the electrons to be cooled for an experimentally useful period of time to temperatures colder than the dilution refrigerator platform, the incoming electrical connections, and the ho…
We report the cooling of electrons in nanoelectronic Coulomb blockade thermometers below 4 mK. Above 7 mK the devices are in good thermal contact with the environment, well isolated from electrical noise, and not susceptible to self-heating. This is attributed to an optimised design that incorporates cooling fins with a high electron-phonon coupling and on-chip electronic filters, combined with a low-noise electronic measurement setup. Below 7 mK the electron temperature is seen to diverge from the ambient temperature. By immersing a Coulomb Blockade Thermometer in the 3He/4He refrigerant of a…
The frontiers of quantum electronics have been linked to the discovery of new refrigeration methods since the discovery of superconductivity at a temperature around $4\,$K, enabled by the liquefaction of helium. Since then, the advances in cryogenics led to discoveries such as the quantum Hall effect and new technologies like superconducting and semiconductor quantum bits. Presently, nanoelectronic devices typically reach electron temperatures around $10\,$mK to $100\,$mK by commercially available dilution refrigerators. However, cooling electrons via the encompassing lattice vibrations, or ph…
Cooling nanoelectronic devices below 10 mK is a great challenge since thermal conductivities become very small, thus creating a pronounced sensitivity to heat leaks. Here, we overcome these difficulties by using adiabatic demagnetization of \emph{both} the electronic leads \emph{and} the large metallic islands of a Coulomb blockade thermometer. This reduces the external heat leak through the leads and also provides on-chip refrigeration, together cooling the thermometer down to 2.8$\pm$0.1 mK. We present a thermal model which gives a good qualitative account and suggests that the main limitati…
We present a parallel network of 16 demagnetization refrigerators mounted on a cryofree dilution refrigerator aimed to cool nanoelectronic devices to sub-millikelvin temperatures. To measure the refrigerator temperature, the thermal motion of electrons in a Ag wire -- thermalized by a spot-weld to one of the Cu nuclear refrigerators -- is inductively picked-up by a superconducting gradiometer and amplified by a SQUID mounted at 4 K. The noise thermometer as well as other thermometers are used to characterize the performance of the system, finding magnetic field independent heat-leaks of a few …
The Peltier effect is the reverse phenomenon of the Seebeck effect, and has been observed experimentally in nanoscale junctions. However, despite its promising applications in local cooling of nanoelectronic devices, the role of strong electron correlations on such a phenomenon is still unclear. Here, by analyzing the thermoelectric properties of quantum impurity systems out of equilibrium, we unveil the essential role of electron-electron interactions and quantum resonant states in Peltier cooling, leading to the prediction of the Kondo cooling phenomenon. The existence of such Kondo cooling …
In this paper, we review the 1/f-type noise properties of nanoelectronic devices focusing on three demonstrative platforms: resistive switching memories, graphene nanogaps and single-molecule nanowires. The functionality of such ultrasmall devices is confined to an extremely small volume, where bulk considerations on the noise loose their validity: the relative contribution of a fluctuator heavily depends on its distance from the device bottleneck, and the noise characteristics are sensitive to the nanometer-scale device geometry and the details of the mostly non-classical transport mechanism.…
We demonstrate the possiblity to cool nanoelectronic systems in nonequilibrium situations by increasing the temperature of the environment. Such cooling by heating is possible for a variety of experimental conditions where the relevant transport-induced excitation processes become quenched and deexcitation processes are enhanced upon an increase of temperature. The phenomenon turns out to be robust with respect to all relevant parameters. It is especially pronounced for higher bias voltages and weak to moderate coupling. Our findings have implications for open quantum systems in general, where…
Fragile quantum effects such as single electron charging in quantum dots or macroscopic coherent tunneling in superconducting junctions are the basis of modern quantum technologies. These phenomena can only be observed in devices where the characteristic spacing between energy levels exceeds the thermal energy, $k_\textrm{B}T$, demanding effective refrigeration techniques for nanoscale electronic devices. Commercially available dilution refrigerators have enabled typical electron temperatures in the $10$ to $100\,$mK regime, however indirect cooling of nanodevices becomes inefficient due to st…
Towards ultra-scaled nanoelectronics using the zipper material system $Bi_2O_2Se/Bi_2SeO_5$
Institute for Microelectronics, Technical University Vienna（维也纳工业大学微电子研究所）；Southern University of Science and Technology（南方科技大学）；Peking University（北京大学）；Huawei Technologies Research and Development Belgium N.V.（华为技术研究与开发比利时有限公司）
The recent identification of strongly bound excitons in room temperature anatase TiO$_2$ single crystals and nanoparticles underscores the importance of bulk many-body effects in samples used for applications. Here, for the first time, we unravel the interplay between many-body interactions and correlations in highly-excited anatase TiO$_2$ nanoparticles using ultrafast two-dimensional deep-ultraviolet spectroscopy. With this approach, under non-resonant excitation, we disentangle the optical nonlinearities contributing to the bleach of the lowest direct exciton peak. This allows us to clock t…
The timescale of electronic cooling is an important parameter controlling the performance of devices based on quantum materials for optoelectronic, thermoelectric and thermal management applications. In most conventional materials, cooling proceeds via the emission of phonons, a relatively slow process that can bottleneck the carrier relaxation dynamics, thus degrading the device performance. Here we present the theory of near-field radiative heat transfer, that occurs when a two-dimensional electron system is coupled via the non-retarded Coulomb interaction to a three-dimensional bulk that ca…
Carrier relaxation measurements in moiré materials offer a unique probe of the microscopic interactions, in particular the ones that are not easily measured by transport. Umklapp scattering between phonons is a ubiquitous momentum-nonconserving process that governs the thermal conductivity of semiconductors and insulators. In contrast, Umklapp scattering between electrons and phonons has not been demonstrated experimentally. Here, we study the cooling of hot electrons in moiré graphene using time- and frequency-resolved photovoltage measurements as a direct probe of its complex energy pathways…
Hot electron effects in graphene are significant because of graphene's small electronic heat capacity and weak electron-phonon coupling, yet the dynamics and cooling mechanisms of hot electrons in graphene are not completely understood. We describe a novel photocurrent spectroscopy method that uses the mixing of continuous-wave lasers in a graphene photothermal detector to measure the frequency dependence and nonlinearity of hot-electron cooling in graphene as a function of the carrier concentration and temperature. The method offers unparalleled sensitivity to the nonlinearity, and probes the…
Two-dimensional electron gases (2DEGs) with high mobility, engineered in semiconductor heterostructures host a variety of ordered phases arising from strong correlations, which emerge at sufficiently low temperatures. The 2DEG can be further controlled by surface gates to create quasi-one dimensional systems, with potential spintronic applications. Here we address the long-standing challenge of cooling such electrons to below 1$\,$mK, potentially important for identification of topological phases and spin correlated states. The 2DEG device was immersed in liquid $^3$He, cooled by the nuclear a…
The primary impediment to continued improvement of charge-based electronics is the excessive energy dissipation incurred in switching a bit of information. With suitable choice of materials, devices made of multiferroic composites, i.e., strain-coupled piezoelectric-magnetostrictive heterostructures, dissipate miniscule amount of energy of ~1 attojoule at room-temperature, while switching in sub-nanosecond delay. Apart from devising memory bits, such devices can be also utilized for building logic, so that they can be deemed suitable for computing purposes as well. Here, we first review the cu…
Pauli blockade occurs when the excited electrons fill up the states near the conduction bands and block subsequent absorption in semiconductors, and has been widely applied in mode-locking for passively-pulsed-laser systems. In this letter, we report the first direct observation that the Pauli blockade is broken by ultrafast cooling of hot electrons in optically-pumped graphene. With femtosecond spectroscopy, we demonstrate that the time scale to excite an electron (~100 fs) is of the same order as that of the electron decay via electron-electron scattering, which allows the electron excitatio…
Dirac Fermion, which is the low energy collective excitation near the Dirac cone in monolayer graphene, have gained great attention by low energy Terahertz probe. In the case of undoped graphene, it has been generally understood that the ultrafast terahertz thermal relaxation is mostly driven by the electron-phonon coupling (EOP), which can be prolonged to tens and hundreds of picoseconds. However, for the high doped graphene, which manifests the negative photoinduced terahertz conductivity, there is still no consensus on the dominant aspects of the cooling process on a time scale of a few pic…
Fast carrier cooling is important for high power graphene based devices. Strongly Coupled Optical Phonons (SCOPs) play a major role in the relaxation of photoexcited carriers in graphene. Heterostructures of graphene and hexagonal boron nitride (hBN) have shown exceptional mobility and high saturation current, which makes them ideal for applications, but the effect of the hBN substrate on carrier cooling mechanisms is not understood. We track the cooling of hot photo-excited carriers in graphene-hBN heterostructures using ultrafast pump-probe spectroscopy. We find that the carriers cool down f…
The use of ultra-low temperature cooling and of high hydrostatic pressure techniques has significantly expanded our understanding of the two-dimensional electron gas confined to GaAs/AlGaAs structures. This chapter reviews a selected set of experiments employing these specialized techniques in the study of the fractional quantum Hall states and of the charged ordered phases, such as the reentrant integer quantum Hall states and the quantum Hall nematic. Topics discussed include a successful cooling technique used, novel odd denominator fractional quantum Hall states, new transport results on e…
