A partially miscible binary liquid mixture, composed of A and B particles, is considered theoretically under conditions for which a stable A-rich liquid phase is in thermal equilibrium with the vapor phase. The B-rich liquid is metastable. The liquids and the thermodynamic conditions are chosen such, that the interface between the A-rich liquid and the vapor contains an intervening wetting film of the B-rich phase. In order to obtain information about the large-scale fluid structure around a colloidal particle, which is trapped at such a composite liquid-vapor interface, three related and linked wetting phenomena at planar liquid-vapor, wall-liquid, and wall-vapor interfaces are studied analytically, using classical density functional theory in conjunction with the sharp-kink approximation for the number density profiles of the A and B particles. If in accordance with the so-called mixing rule the strength of the A-B interaction is given by the geometric mean of the strengths of the A-A and B-B interactions, and similarly the ratio between the wall-A and the wall-B interaction, the scenario, in which the colloid is enclosed by a film of the B-rich liquid, can be excluded. Up to six distinct wetting scenarios are possible, if the above mixing rules for the fluid-wall and for the fluid-fluid interactions are relaxed. The way the space of system parameters is divided into domains corresponding to the six scenarios, and which of the domains actually appear, depends on the signs of the deviations from the mixing rule prescriptions. Relevant domains emerge, if the ratio between the strengths of the wall-A and the wall-B interactions is reduced as compared to the mixing rule prescription, or if the strength of the A-B interaction is increased to values above the one from the mixing rule prescription. The range, within which the contact angle may vary inside the various domains, is also studied.
Within an Onsager-like density functional theory we explore the thermodynamic and structural properties of an isotropic and nematic fluid of hard needle-like colloids in contact with a hard substrate coated with a soft short-ranged attractive or repulsive layer. As a function of the range and the strength of the soft interactions we find wetting and drying transitions, a pre-drying line, and a symmetry-breaking transition from uniaxial to biaxial in the wetting and drying film.
In thermal equilibrium, a colloidal particle between two parallel plates immersed in a fluid which partially wets both the particle and the plates, is attracted by the walls. However, if the particle moves parallel to the plates, a hydrodynamic lift force away from the plates arises in the limit of low Reynolds number. We study theoretically the competition of these two effects and identify the range of velocity in which the velocity may serve as a parameter controlling the adsorption in microflows.
We have carried out extensive equilibrium molecular dynamics (MD) simulations to study the structure and the interfacial properties in the liquid-vapor (LV) phase coexistence of partially miscible binary Lennard-Jones (LJ) mixtures. By analyzing the structural properties as a function of the miscibility parameter, $ α$, we found that at relatively low temperatures the system separates forming a liquid A-liquid B interface in coexistence with the vapor phase. At higher temperatures and, $ 0<α\leq 0.5 $, we found a temperature range, $T^{*}_{w}(α) \leq T^{*} < T^{*}_{cons}(α)$, where the liquid …
The phase behavior of colloidal particles embedded in a binary fluid is influenced by wetting layers surrounding each particle. The free energy of the fluid film depends on its morphology, i.e., on size, shape and connectivity. Under rather natural assumptions a general expression for the Hamiltonian can be given extending the model of hard spheres to partially penetrable shapes including energy contributions related to the volume, surface area, mean curvature, and Euler characteristic of the wetting layer. The complex spatial structure leads to multi-particle interactions of the colloidal par…
Density functional theory is used to study binary colloidal fluids consisting of hard spheres and thin platelets in their bulk and near a planar hard wall. This system exhibits liquid-liquid coexistence of a phase that is rich in spheres (poor in platelets) and a phase that is poor in spheres (rich in platelets). For the mixture near a planar hard wall, we find that the phase rich in spheres wets the wall completely upon approaching the liquid demixing binodal from the sphere-poor phase, provided the concentration of the platelets is smaller than a threshold value which marks a first-order wet…
In this contribution we study wetting and nucleation of vapor bubbles on nanodecorated surfaces via free energy molecular dynamics simulations. The results shed light on the stability of superhydrophobicity in submerged surfaces with nanoscale corrugations. The re-entrant geometry of the cavities under investigation is capable of sustaining a confined vapor phase within the surface roughness (Cassie state) both for hydrophobic and hydrophilic combinations of liquid and solid. The atomistic system is of nanometric size; on this scale thermally activated events can play an important role ultimat…
Using molecular dynamics simulations, we study the motion of a closely fitting nanometer-size solid sphere in a fluid-filled cylindrical nanochannel at low Reynolds numbers and for a wide range of fluid-solid interactions corresponding to different wetting situations. For fluids that are not completely wetting we observe an interesting and novel adsorption phenomenon, in which the solid sphere, that was initially moving along the center of the tube, meanders across the channel and suddenly adsorbes onto the wall. Thereafter, the adsorbed sphere either {\it sticks} to the wall and remains motio…
Above a critical temperature known as the Leidenfrost point (LFP), a heated surface can suspend a liquid droplet above a film of its own vapor. The insulating vapor film can be highly detrimental in metallurgical quenching and thermal control of electronic devices, but may also be harnessed to reduce drag and generate power. Manipulation of the LFP has occurred mostly through experiment, giving rise to a variety of semi-empirical models that account for the Rayleigh-Taylor instability, nucleation rates, and superheat limits. However, a truly comprehensive model has been difficult given that th…
The analytical expressions of liquid-vapor macroscopic contact angles are analyzed for various simple geometries and arrangements of the substrate, in particular when the latter exhibits two or more scales. It concerns the Wenzel state of wetting when the substrate is completely wet, the Cassie-Baxter state when the liquid hangs over the substrate, but also intermediate states of wetting which are shown to be relevant and in competition with the two other ones. Under a separation of scales hypothesis, a composition rule of contact angles is developed whose interest is illustrated in a close pa…
We investigate the initiation of cracks in vertically freestanding water-saturated colloidal pillars constructed using a direct-write technique. Paradoxically, the cracks form during drying at the free end, far from the substrate, where the particle network is unconstrained in contracting its volume as it bears compression by a uniform capillary pressure acting at its outer surface. This is explained by a dominant balance of wetting energy terms, from which follows a simple relationship between the particle size and pillar dimensions that captures the presence or absence of cracks. This relati…
A simulation model is presented, comprising elastic spheres with a short range attraction. Besides conservative forces, radial- and shear friction, and radial noise are added. The model can be used to simulate colloids, granular solids and powders, and the parameters may be related to experimental systems via the range of attraction and the adhesion energy. The model shares the simplicity and speed of Dissipative Particle Dynamics (DPD), yet the predictions are rather non-trivial. We demonstrate that the model predicts the correct scaling relations for fracture of granular solids, and we prese…
We investigate the microstructural and microrheological response to a tracer particle of a two- dimensional colloidal suspension under thermodynamic conditions close to a liquid-gas phase bound- ary. On the liquid side of the binodal, increasing the velocity of the (repulsive) tracer leads to the development of a pronounced cavitation bubble, within which the concentration of colloidal parti- cles is strongly depleted. The tendency of the liquid to cavitate is characterized by a dimensionless colloidal cavitation number. On the gas side of the binodal, a pulled (attractive) tracer leaves behin…
We calculate the interaction between two spherical colloidal particles embedded in the isotropic phase of a nematogenic liquid. The surface of the particles induces wetting nematic coronas that mediate an elastic interaction. In the weak wetting regime, we obtain exact results for the interaction energy and the texture, showing that defects and biaxiality arise, although they are not topologically required. We evidence rich behaviors, including the possibility of reversible colloidal aggregation and dispersion. Complex anisotropic self-assembled phases might be formed in dense suspensions.
Using Brownian dynamics simulations, we systematically study the effective interaction between two parallel hard walls in a 2D suspension of self-propelled (active) colloidal hard spheres, and we find that the effective force between two hard walls can be tuned from a long range repulsion into a long range attraction by changing the density of active particles. At relatively high densities, the active hard spheres can form a dynamic crystalline bridge, which induces a strong oscillating long range dynamic wetting repulsion between the walls. With decreasing density, the dynamic bridge graduall…
We present simulation results addressing the phenomena of colloidal gelation induced by attractive interactions. The liquid-gas transition is prevented by the glass arrest at high enough attraction strength, resulting in a colloidal gel. The dynamics of the system is controlled by the glass, with little effect of the liquid-gas transition. When the system separates in a liquid and vapor phases, even if the denser phase enters the non-ergodic region, the vapor phase enables the structural relaxation of the system as a whole.
Based on a microscopic density functional theory we calculate the internal structure of the three-phase contact line between liquid, vapor, and a confining wall as well as the morphology of liquid wetting films on a substrate exhibiting a chemical step. We present a refined numerical analysis of the nonlocal density functional which describes the interface morphologies and the corresponding line tensions. These results are compared with those predicted by a more simple phenomenological interface displacement model. Except for the case that the interface exhibits large curvatures, we find that …
Hypothesis: As a fluid approaches three phase coexistence, adsorption may take place by the successive formation of two intervening wetting films. The equilibrium thickness of these wetting layers is the result of a delicate balance of intermolecular forces, as dictated by an underlying interface potential. The van der Waals forces for the two variable adsorption layers may be formulated exactly from Dzyaloshinskii-Lifshitz-Pitaevskii theory, and analytical approximations may be derived that extent well beyond the validity of conventional Hamaker theory. Calculations: We consider the adsorptio…
In this paper, the self-assembly of condensed droplets on smooth and constrained surfaces under saturated vapor atmosphere of ethanol and methanol binary system is reported. Hexagonally ordered array of pores are obtained on smooth surfaces with saturated vapors of binary liquids without the assistance of any additives. The results show that the addition of small amount of ethanol to methanol plays a role very similar to that of surface active agents in inducing the formation of regular droplet array. The effect of constraints on self-assembled droplet pattern such as movement of contact line …
Using a density functional based interface displacement model we determine the effective interaction potential between two spherical particles which are immersed in a homogeneous fluid such as the vapor phase of a one-component substance or the A-rich liquid phase of a binary liquid mixture composed of A and B particles. If this solvent is thermodynamically close to a first-order fluid-fluid phase transition, the spheres are covered with wetting films of the incipient bulk phase, i.e., the liquid phase or the B-rich liquid, respectively. Below a critical distance between the spheres their wett…
The effect of line tension on the axisymmetric nanoscale capillary bridge between two identical substrates with convex, concave and flat geometry at the liquid-vapor equilibrium is theoretically studied. The modified Young's equation for the contact angle, which takes into account the effect of line tension is derived on a general axisymmetric curved surface using the variational method. Even without the effect of line tension, the parameter space where the bridge can exist is limited simply by the geometry of substrates. The modified Young's equation further restricts the space where the brid…
We introduce an accurate and efficient method for characterizing surface wetting and interfacial properties, such as the contact angle made by a liquid droplet on a solid surface, and the vapor-liquid surface tension of a fluid. The method makes use of molecular simulations in conjunction with the indirect umbrella sampling technique to systematically wet the surface and estimate the corresponding free energy. To illustrate the method, we study the wetting of a family of Lennard-Jones surfaces by water. We estimate contact angles for surfaces with a wide range of attractions for water by using…
The liquid-gas transition of an electroneutral mixture of oppositely charged colloids, studied by Monte Carlo simulations, is found in the low temperature -- low density region. The critical temperature shows a non-monotonous behavior as a function of the interaction range, $κ^{-1}$, with a maximum at $κσ\approx 10$, implying an island of coexistence in the $κ$-$ρ$ plane. The system is arranged in such a way that each particle is surrounded by shells of particles with alternating charge. In contrast with the electrolyte primitive model, both neutral and charged clusters are obtained in the vap…
Density-functional theory is used to investigate the phase behavior of colloidal binary hard-platelet and hard-rod fluids near a single hard wall or confined in a slit pore. The Zwanzig model, in which the orientations of the particles of rectangular shape are restricted to three orthogonal orientations, is analyzed by numerical minimization of the grand potential functional. The density and orientational profiles as well as the surface contributions to the grand potential are determined. The calculations exhibit a wall-induced continuous surface transition from uniaxial to biaxial symmetry fo…
The surface phase behavior of binary mixtures of colloidal hard rods in contact with a solid substrate (hard wall) is studied, with special emphasis on the region of the phase diagram that includes the smectic A phase. The colloidal rods are modelled as hard cylinders of the same diameter and different lengths, in the approximation of perfect alignment. A fundamental--measure density functional is used to obtain equilibrium density profiles and thermodynamic properties such as surface tensions and adsorption coefficients. The bulk phase diagram exhibits nematic-smectic and smectic-smectic demi…
We explore experimentally the fluidization of vertically agitated PMMA spheres wetted by liquid $^4$He. By controlling the temperature around the $λ$ point we change the properties of the wetting liquid from a normal fluid (helium I) to a superfluid (helium II). For wetting by helium I, the critical acceleration for fluidization ($Γ_c$) shows a steep increase close to the saturation of the vapor pressure in the sample cell. For helium II wetting, $Γ_c$ starts to increase at about 75% saturation, indicating that capillary bridges are enhanced by the superflow of unsaturated helium film. Above s…
It is well known that, at a macroscopic level, the boundary condition for a viscous fluid at a solid wall is one of "no-slip". The liquid velocity field vanishes at a fixed solid boundary. In this paper, we consider the special case of a liquid that partially wets the solid, i.e. a drop of liquid in equilibrium with its vapor on the solid substrate has a finite contact angle. Using extensive Non-Equilibrium Molecular Dynamics (NEMD) simulations, we show that when the contact angle is large enough, the boundary condition can drastically differ (at a microscopic level) from a "no-slip" condition…
A simple fluid, described by point-like particles interacting via the Lennard-Jones potential, is considered under confinement in a slit geometry between two walls at distance Lz apart for densities inside the vapor-liquid coexistence curve. Equilibrium then requires the coexistence of a liquid "bridge" between the two walls, and vapor in the remaining pore volume. We study this equilibrium for several choices of the wall-fluid interaction (corresponding to the full range from complete wetting to complete drying, for a macroscopically thick film), and consider also the kinetics of state change…
Alkali halide (100) crystal surfaces are poorly wetted by their own melt at the triple point. We carried out simulations for NaCl(100) within the well tested BMHFT model potential. Calculations of the solid-vapor, solid-liquid and liquid-vapor free energies showed that solid NaCl(100) is a non-melting surface, and explain its bad wetting in detail. The extreme stability of NaCl(100) is ideal for a study of the nanofriction in the high temperature regime, close to and even above the bulk melting temperature (T_M). Our simulations reveal in this regime two distinct and opposite phenomena for plo…
Measurements of the surface diffusivity of colloidal spheres translating along a vapor/liquid inter- face show an unexpected decrease in diffusivity, or increase in surface drag (from the Stokes-Einstein relation) when the particles situate further into the vapor phase. However, direct measurements of the surface drag from the colloid velocity due to an external force find the expected decrease with deeper immersion into the vapor. The paradoxical drag increase observed in diffusion experiments has been attributed to the attachment of the fluid interface to heterogeneities on the colloid surfa…
We report on a new method to characterize nano-hydrodynamic properties at the liquid/solid interface relying solely on the measurement of the thermal motion of confined colloids. Using Fluorescence Correlation Spectroscopy (FCS) to probe the diffusion of the colloidal tracers, this optical technique --equivalent in spirit to the microrheology technique used for bulk properties-- is able to achieve nanometric resolution on the slip length measurement. It confirms the no-slip boundary condition on wetting surfaces and shows a partial slip b=18 +/- 5 nm on non-wetting ones. Moreover, in the absen…
We determine the solvent mediated contribution to the effective potentials for model colloidal or nano- particles dispersed in a binary solvent that exhibits fluid-fluid phase separation. Using a simple density functional theory we calculate the density profiles of both solvent species in the presence of the `colloids', which are treated as external potentials, and determine the solvent mediated (SM) potentials. Specifically, we calculate SM potentials between (i) two colloids, (ii) a colloid and a planar fluid-fluid interface, and (iii) a colloid and a planar wall with an adsorbed wetting fil…
Colloidal particles at complex fluid interfaces and within films assemble to form ordered structures with high degrees of symmetry via interactions that include capillarity, elasticity, and other fields like electrostatic charge. Here we study microparticle interactions within free-standing smectic-A films, in which the elasticity arising from the director field distortion and capillary interactions arising from interface deformation compete to direct the assembly of motile particles. New colloidal assemblies and patterns, ranging from 1D chains to 2D aggregates, sensitive to the initial wetti…
Colloidal particles with appropriate wetting properties can become very strongly trapped at an interface between two immiscible fluids. We have harnessed this phenomenon to create a new class of soft materials with intriguing and potentially useful characteristics. The material is known as a bijel: bicontinuous interfacially-jammed emulsion gel. It is a colloid-stabilized emulsion with fluid-bicontinuous domains. The potential to create these gels was first predicted using computer simulations. Experimentally we use mixtures of water and 2,6-lutidine at the composition for which the system und…
One of the varieties of pores, often found in natural or artificial building materials, are the so-called blind pores of dead-end or saccate type. Three-dimensional model of such kind of pore has been developed in this work. This model has been used for simulation of water vapor interaction with individual pore by molecular dynamics in combination with the diffusion equation method. Special investigations have been done to find dependencies between thermostats implementations and conservation of thermodynamic and statistical values of water vapor - pore system. The two types of evolution of wa…
Adsorption of small amphiphilic molecules occurs in various biological and technological processes, sometimes desired, the other times unwanted (e.g., contamination). Surface-active molecules preferentially bind to interfaces and affect their wetting properties. We study the adsorption of short-chained alcohols (simple surfactants) to the water-vapor interface and solid surfaces of various polarities using molecular dynamics simulations. The analysis enables us to establish a theoretical expression for the adsorption coefficient, which exponentially scales with the molecular surface area and t…
Understanding the phase behaviour of mixtures continues to pose challenges, even for systems that might be considered "simple". Here we consider a very simple mixture of two colloidal and one non-adsorbing polymer species which can be simplified even further to a size-asymmetrical binary mixture, in which the effective colloid-colloid interactions depend on the polymer concentration. We show that this basic system exhibits surprisingly rich phase behaviour. In particular, we enquire whether such a system features only a liquid-vapor phase separation (as in one-component colloid-polymer mixture…
Particle-stabilized emulsions are commonly used in various industrial applications. These emulsions can present in different forms, such as Pickering emulsions or bijels, which can be distinguished by their different topologies and rheology. We numerically investigate the effect of the volume fraction and the uniform wettability of the stabilizing spherical particles in mixtures of two fluids. For this, we use the well-established three-dimensional lattice Boltzmann method, extended to allow for the added colloidal particles with non-neutral wetting properties. We obtain data on the domain siz…
Most studies on melting under confinement focus only on the solid and liquid melt phases. Despite of its ubiquity, contributions from the capillary interface (liquid / vapor interface) are often neglected. In this study the melting behavior of small cylindrical aggregates in vapor attached to planar surfaces is analyzed. For the assumed boundary conditions (cylindrical solid with a non wetting top plane and a wettable side wall) solid and the liquid phases can coexist within a certain temperature range. Due to capillary instability, the liquid phase can form either an axisymmetric rouloid morp…
Density functional theory is used to study colloidal hard-rod fluids near an individual right-angled wedge or edge as well as near a hard wall which is periodically patterned with rectangular barriers. The Zwanzig model, in which the orientations of the rods are restricted to three orthogonal orientations but their positions can vary continuously, is analyzed by numerical minimization of the grand potential. Density and orientational order profiles, excess adsorptions, as well as surface and line tensions are determined. The calculations exhibit an enrichment [depletion] of rods lying parallel…
We analyse a binary mixture of colloidal parallel hard cylindrical particles with identical diameters but dissimilar lengths $L_1$ and $L_2$, with $s=L_2/L_1=3$, confined by two parallel hard walls in a planar slit-pore geometry, using a fundamental--measure density functional theory. This model presents nematic (N) and two types of smectic (S) phases, with first- and second-order N-S bulk transitions and S-S demixing, and surface behaviour at a single hard wall which includes complete wetting by the S phase mediated (or not) by an infinite number of surface-induced layering (SIL) transitions.…
Recent advances in nano-rheology require that new methods and models be developed to describe the equilibrium and non-equilibrium properties of entangled polymeric materials and their interfaces at a molecular level of detail. In this work we present a Slip-Spring (SLSP) model capable of describing the dynamics of entangled polymers at interfaces, including explicit liquid-vapor and liquid-solid interfaces. The highly coarse-grained approach adopted with this model enables simulation of entire nano-rheological characterization systems within a particle-level base description. Many-body dissipa…
The time-dependent structure, interfacial tension, and evaporation of an oversaturated colloid-rich (liquid) phase in contact with an undersaturated colloid-poor (vapor) phase of a colloidal dispersion is investigated theoretically during the early-stage relaxation, where the interface is relaxing towards a local equilibrium state while the bulk phases are still out of equilibrium. Since systems of this type exhibit a clear separation of colloidal and solvent relaxation time scales with typical times of interfacial tension measurements in between, they can be expected to be suitable for analog…
A finite-temperature density functional approach to describe the properties of parahydrogen in the liquid-vapor coexistence region is presented. The first proposed functional is zero-range, where the density-gradient term is adjusted so as to reproduce the surface tension of the liquid-vapor interface at low temperature. The second functional is finite-range and, while it is fitted to reproduce bulk pH2 properties only, it is shown to yield surface properties in good agreement with experiments. These functionals are used to study the surface thickness of the liquid-vapor interface, the wetting…
he contact angle of a liquid droplet on a surface under partial wetting conditions differs for a nanoscopically rough or periodically corrugated surface from its value for a perfectly flat surface. Wenzel's relation attributes this difference simply to the geometric magnification of the surface area (by a factor $r_{\rm w}$), but the validity of this idea is controversial. We elucidate this problem by model calculations for a sinusoidal corrugation of the form $z_{\rm wall}(y) = Δ\cos(2πy/λ)$ , for a potential of short range $σ_{\rm w}$ acting from the wall on the fluid particles. When the vap…
We investigate the structure of a dilute mixture of amphiphilic dimers and spherical particles, a model relevant to the problem of encapsulating globular "guest" molecules in a dispersion. Dimers and spheres are taken to be hard particles, with an additional attraction between spheres and the smaller monomers in a dimer. Using Monte Carlo simulation, we document the low-temperature formation of aggregates of guests (clusters) held together by dimers, whose typical size and shape depend on the guest concentration $χ$. For low $χ$ (less than $10\%$), most guests are isolated and coated with a la…
We consider the Asakura-Oosawa-Vrij model of hard sphere colloids and ideal polymer coils in contact with a planar hard wall at (colloidal) liquid-gas coexistence. Using extensive numerical density functional calculations, the liquid-gas, wall-liquid and wall-gas interfacial free energies are calculated. The results are inserted into Young's equation to obtain the contact angle between the liquid-gas interface and the wall. As a function of polymer fugacity this angle exhibits discontinuities of slope (``kinks'') upon crossing first-order surface phase transitions located on the gas branch of …
Exploring the role of hydrodynamic interactions in spherically-confined drying colloidal suspensions
Auburn University（奥本大学）；Leibniz-Institut für Polymerforschung Dresden e.V.（德累斯顿莱布尼茨聚合物研究所）；Technische Universität Dresden（德累斯顿工业大学）；Johannes Gutenberg University Mainz（美因茨约翰内斯·古腾堡大学）
In this paper, we aim to investigate the implementation of contact angles in the pseudopotential lattice Boltzmann modeling of wetting at a large density ratio. The pseudopotential lattice Boltzmann model [X. Shan and H. Chen, Phys. Rev. E 49, 2941 (1994)] is a popular mesoscopic model for simulating multiphase flows and interfacial dynamics. In this model, the contact angle is usually realized by a fluid-solid interaction. Two widely used fluid-solid interactions: the density-based interaction and the pseudopotential-based interaction, as well as a modified pseudopotential-based interaction f…
A model is developed for describing the transport of charged colloidal particles in an evaporating sessile droplet on the electrified metal substrate in the presence of a solvent flow. The model takes into account the electric charge of colloidal particles and small ions produced by electrolytic dissociation of the active groups on the colloidal particles and solvent molecules. We employ a system of self-consistent Poisson and Nernst--Planck equations for electric potential and average concentrations of colloidal particles and ions with the appropriate boundary conditions. The fluid dynamics, …
We study the formation and the shape of a liquid meniscus in a wedge with opening angle $2ϕ$ which is exposed to a vapor phase. By applying a suitable effective interface model, at liquid-vapor coexistence and at a temperature $T_ϕ$ we find a filling transition at which the height of the meniscus becomes macroscopically large while the planar walls of the wedge far away from its center remain nonwet up to the wetting transition occurring at $T_w>T_ϕ$. Depending on the fluid and the substrate potential the filling transition can be either continuous or discontinuous. In the latter case it is ac…
We study the interaction of an elastic beam with a liquid drop in the case where bending and extensional effects are both present. We use a variational approach to derive equilibrium equations and constitutive relation for the beam. This relation is shown to include a term due to surface energy in addition of the classical Young's modulus term, leading to a modification of Hooke's law. At the triple point where solid, liquid, and vapor phases meet we find that the external force applied on the beam is parallel to the liquid-vapor interface. Moreover, in the case where solid-vapor and solid-liq…
The interface of a cholesteric liquid crystal with an isotropic fluid can display a range of unusual properties, such as a layer of topological defects close to an undulated interface. These properties have been know for a long time and have been explored for technological applications as a tunable substrate for colloidal self-assembly. However, from a fundamental point of view, this interface remains poorly understood and even basic properties, such as the dependence of the surface tension on the attributes of the liquid crystal, remain unknown. Here, we present a systematic calculation of th…
Last years, there has been a renewed interest in the utilization of statistical field theory methods for the description of systems at equilibrium both in the vicinity and away from critical points, in particular in the field of liquid state physics. These works deal in general with homogeneous systems, although recently the study of liquids in the vicinity of hard walls has also been considered in this way. On the other hand, effective Hamiltonian pertaining to the $ϕ^4$ theory family have been written and extensively used for the description of inhomogeneous systems either at the simple inte…
We introduce a new numerical technique, namely triangular tessellation, to calculate the free energy associated with the adsorption of a colloidal particle at a flat interface. The theory and numerical scheme presented here are sufficiently general to handle non-convex patchy colloids with arbitrary surface patterns characterized by a wetting angle, e.g., amphiphilicity. We ignore interfacial deformation due to capillary, electrostatic, or gravitational forces, but the method can be extended to take such effects into account. It is verified that the numerical method presented is accurate and s…
