Atomically thin sheets of lead-free one-dimensional hybrid perovskites feature tunable white-light emission from self-trapped excitons
Philip Klement, Natalie Dehnhardt, Chuan-Ding Dong, Florian Dobener, Samuel Bayliff, Julius Winkler, Detlev M. Hofmann, Peter J. Klar, Stefan Schumacher, Sangam… 展开作者
Philip Klement, Natalie Dehnhardt, Chuan-Ding Dong, Florian Dobener, Samuel Bayliff, Julius Winkler, Detlev M. Hofmann, Peter J. Klar, Stefan Schumacher, Sangam Chatterjee, Johanna Heine
Low-dimensional organic-inorganic perovskites synergize the virtues of two unique classes of materials featuring intriguing possibilities for next-generation optoelectronics: they offer tailorable building blocks for atomically thin, layered materials while providing the enhanced light harvesting and emitting capabilities of hybrid perovskites. Here, we go beyond the paradigm that atomically thin materials require in-plane covalent bonding and report single layers of the one-dimensional organic-inorganic perovskite [C$_7$H$_{10}$N]$_3$[BiCl$_5$]Cl. Its unique 1D-2D structure enables single layers and the formation of self-trapped excitons which show white light emission. The thickness dependence of the exciton self-trapping causes an extremely strong shift of the emission energy. Thus, such two-dimensional perovskites demonstrate that already 1D covalent interactions suffice to realize atomically thin materials and provide access to unique exciton physics. These findings enable a much more general construction principle for tailoring and identifying two-dimensional materials that are no longer limited to covalently bonded 2D sheets.
Halide perovskite light absorbers have great advantages for photovoltaics such as efficient solar energy absorption, but charge accumulation and recombination at the interface with an electron transport layer (ETL) remains a major challenge in realizing their full potential. Here we report the experimental realization of a zipper-like interdigitated interface between a Pb-based halide perovskite light absorber and an oxide ETL by the PbO capping of the ETL surface, which produces an atomically thin two-dimensional metallic layer that can significantly enhance the perovskite/ETL charge extracti…
Geometrical confinement effect in exfoliated sheets of layered materials leads to significant evolution of energy dispersion with decreasing layer thickness. Molybdenum disulphide (MoS2) was recently found to exhibit indirect to direct gap transition when the thickness is reduced to a single monolayer. This leads to remarkable enhancement in the photoluminescence efficiency, which opens up new opportunities for the optoelectronic applications of the material. Here we report differential reflectance and photoluminescence (PL) spectra of mono- to few-layer WS2 and WSe2 that indicate that the ban…
The first examples of single crystal epitaxial thin films of a high entropy perovskite oxide are synthesized. Pulsed laser deposition is used to grow the configurationally disordered ABO3 perovskite, Ba(Zr0.2Sn0.2Ti0.2Hf0.2Nb0.2)O3, epitaxially on SrTiO3 and MgO substrates. X-ray diffraction and scanning transmission electron microscopy demonstrate that the films are single phase with excellent crystallinity and atomically abrupt interfaces to the underlying substrates. Atomically-resolved electron energy loss spectroscopy mapping shows a uniform and random distribution of all B-site cations. …
We demonstrate the making of BaZrS3 thin films by molecular beam epitaxy (MBE). BaZrS3 forms in the orthorhombic distorted-perovskite structure with corner-sharing ZrS6 octahedra. The single-step MBE process results in films smooth on the atomic scale, with near-perfect BaZrS3 stoichiometry and an atomically-sharp interface with the LaAlO3 substrate. The films grow epitaxially via two, competing growth modes: buffered epitaxy, with a self-assembled interface layer that relieves the epitaxial strain, and direct epitaxy, with rotated-cube-on-cube growth that accommodates the large lattice consta…
Atomically-abrupt interfaces in transition metal oxide (TMO) heterostructures could host a variety of exotic condensed matter phases that may not be found in the bulk materials at equilibrium. A critical step in the development of such atomically-sharp interfaces is the deposition of atomically-smooth TMO thin films. Optimized deposition conditions exist for the growth of perovskite oxides. However, the deposition of rutile oxides, such as VO$_2$, with atomic-layer precision has been challenging. In this work, we used pulsed laser deposition (PLD) to grow atomically-smooth VO$_2$ thin films on…
Many of the recent advancements in oxide heterostructures have been attributed to modification of spin, charge, lattice, and orbital order parameters at atomically well-defined interfaces. However, the details on the structural, chemical, and electrostatic evolution of interfaces comprised of materials with different crystallographic symmetries remain to be understood. In this work, we have mapped out the interfacial connectivity of atoms of two dissimilar materials, the perovskite SrTiO3 and the brownmillerite SrCoO2.5, using high resolution scanning transmission electron microscopy and geome…
The emerging new paradigm of technologies, the internet of things, entails a process of device miniaturization to combine several functional components, such as sensors, actuators, and powering elements, in a single individual on-chip platform. An essential requirement is for the devices to have a small footprint and thus to be extended over three-dimensions to present adequate performance. A suitable technique to realize devices of complex architectures and virtually any size is three-dimensional printing. So far its use has seen applications exclusively at the macroscale. Here we report the …
Among the large number of promising two-dimensional (2D) atomic layer crystals, true metallic layers are rare. Through combined theoretical and experimental approaches, we report on the stability and successful exfoliation of atomically thin gallenene sheets, having two distinct atomic arrangements along crystallographic twin directions of the parent alpha-gallium. Utilizing the weak interface between solid and molten phases of gallium, a solid-melt interface exfoliation technique is developed to extract these layers. Phonon dispersion calculations show that gallenene can be stabilized with bu…
Atomically thin two-dimensional molybdenum disulfide (MoS2) sheets have attracted much attention due to their potential for future electronic applications. They not only present the best planar electrostatic control in a device, but also lend themselves readily for dielectric engineering. In this work, we experimentally investigated the dielectric effect on the Raman and photoluminescence (PL) spectra of monolayer MoS2 by comparing samples with and without HfO2 on top by atomic layer deposition (ALD). Based on considerations of the thermal, doping, strain and dielectric screening influences, i…
We demonstrate fabrication of atomically sharp interfaces between nitride antiperovskite Mn$_{3}$GaN and oxide perovskites (La$_{0.3}$Sr$_{0.7}$)(Al$_{0.65}$Ta$_{0.35}$)O$_{3}$ (LSAT) and SrTiO$_{3}$ as paradigms of nitride-antiperovskite/oxide-perovskite heterostructures. Using a combination of scanning transmission electron microscopy (STEM), atomic-resolution spectroscopic techniques, and first-principle calculations, we investigated the atomic-scale structure, composition, and boding at the interface. We show that the epitaxial growth between the antiperovskite and perovskite compounds is …
Friction is a ubiquitous phenomenon that greatly affects our everyday lives and is responsible for large amounts of energy loss in industrialised societies. Layered materials such as graphene have interesting frictional properties and are often used as (additives to) lubricants to reduce friction and protect against wear. Experimental Atomic Force Microscopy studies and detailed simulations have shown a number of intriguing effects such as friction strengthening and dependence of friction on the number of layers covering a surface. Here, we propose a simple, fundamental, model for friction on …
We have measured surface morphology and gas adsorption characteristics of uncompressed pyrolytic graphite sheet (uPGS) which is a candidate substrate for AC and DC superflow experiments on monolayers of 4He below T = 1 K. The PGS is a mass-produced thin graphite sheet with various thicknesses between 10 and 100 μm. We employed a variety of measuring techniques such as imagings with optical microscope, SEM and STM, Raman spectroscopy, and adsorption isotherm. PGS has smooth and atomically-flat external surfaces with high crystallinity. Although the specific surface area (<0.1 m$^2$/g) is rather…
Scanning Transmission Electron Microscopy (STEM) has enabled mapping of atomic structures of solids with sub-pm precision, providing insight to the physics of ferroic phenomena and chemical expansion. However, only a subset of information is available, due to projective nature of imaging in the beam direction. Correspondingly, the analysis often relies on the postulated known form of macroscopic Landau-Ginzburg energy, and some predefined relationship between experimentally determined atomic coordinates and the order parameter field. Here, we propose an approach for exploring the structure of …
The layered compound La2-2xSr1+2xMn2O7 (x=0.3) consists of bilayers of metallic MnO2 sheets separated by insulating material. The compound exhibits markedly anisotropic magnetoresistance at temperatures well below the three-dimensional magnetic ordering temperature TC=90 K in addition to colossal magnetoresistance around TC. We present neutron diffraction data which show that the magnetic structure of this material switches from antiferromagnetic stacking of the (ferromagnetically ordered) sheets in zero field to ferromagnetic stacking in a field of 1.5 Tesla. The data are the first to be coll…
Non-monotonic hydration dependence of ionic transport in atomically-thin MnO2 sheets
Institute of Materials Science and Nanotechnology, Bilkent University（比尔肯特大学材料科学与纳米技术研究所）；Bilkent National Nanotechnology Research Center - UNAM（比尔肯特国家纳米技术研究中心）；Department of Physics, Middle East Technical University（中东理工大学物理系）
Thickness is one of the fundamental parameters that define the electronic, optical, and thermal properties of two-dimensional (2D) crystals. Phonons in molybdenum disulfide (MoS2) were recently found to exhibit unique thickness dependence due to interplay between short and long range interactions. Here we report Raman spectra of atomically thin sheets of WS2 and WSe2 in the mono- to few-layer thickness regime. We show that, similar to the case of MoS2, the characteristic and modes exhibit stiffening and softening with increasing number of layers, respectively, with a small shift of less than 3…
We study the thermal effects on the frictional properties of atomically thin sheets. We simulate a simple model based on the Prandtl-Tomlinson model that reproduces the layer dependence of friction and strengthening effects seen in AFM experiments. We investigate sliding at constant speed as well as reversing direction. We also investigate contact aging: the changes that occur to the contact when the sliding stops completely. We compare the numerical results to analytical calculations based on Kramers rates. We find that there is a slower than exponential contact aging that weakens the contact…
As a 2D ferromagnetic semiconductor with magnetic ordering, atomically thin chromium triiodide is the latest addition to the family of two-dimensional (2D) materials. However, realistic exploration of CrI3-based devices and heterostructures is challenging, due to its extreme instability under ambient conditions. Here we present Raman characterization of CrI3, and demonstrate that the main degradation pathway of CrI3 is the photocatalytic substitution of iodine by water. While simple encapsulation by Al2O3, PMMA and hexagonal BN (hBN) only leads to modest reduction in degradation rate, minimizi…
The aim of this work is to study the electrostatic screening by single and few-layer MoS2 sheets by means of electrostatic force microscopy in combination with a non-linear Thomas-Fermi Theory to interpret the experimental results. We find that a continuum model of decoupled layers, which satisfactorily reproduces the electrostatic screening for graphene and graphite, cannot account for the experimental observations. A three-dimensional model with an interlayer hopping parameter can on the other hand successfully account for the observed electric field screening by MoS2 nanolayers, pointing ou…
We show that it is possible to deposit, by mechanical exfoliation on SiO2/Si wafers, atomically thin mica flakes down to a single monolayer thickness. The optical contrast of these mica flakes on top of a SiO2/Si substrate, which depends on their thickness, the illumination wavelength and the SiO2 substrate thickness, can be quantitatively accounted for by a Fresnel law based model. The preparation of atomically thin insulating crystalline sheets will enable the fabrication of ultrathin defect-free insulating substrates, dielectric barriers or planar electron tunneling junctions. Additionally,…
Oxygen stoichiometry is one of the most important elements in determining the physical properties of transition metal oxides (TMOs). A small fractional change in the oxygen content, resulting in the variation of valence state of the transition metal, can drastically modify the materials functionalities. In particular, TMOs with mixed valences have attracted attention for many energy applications. Previous studies also showed that the ability to control the number of d-band electron populations and detailed spin configurations is critical for improved catalytic performance of TMOs. In this cont…
Lead-halide perovskites emerged as novel semiconducting materials suitable for a variety of optoelectronic applications. However, fabrication of reliable perovskite field-effect transistors (FETs), the devices necessary for the fundamental and applied research on charge transport properties of this class of materials, has proven challenging. Here we demonstrate high-performance perovskite FETs based on epitaxial, single crystalline thin films of cesium lead bromide (CsPbBr3). An improved vapor-phase epitaxy has allowed growing truly large-area, atomically flat films of this perovskite with exc…
We have studied the elastic deformation of freely suspended atomically thin sheets of muscovite mica, a widely used electrical insulator in its bulk form. Using an atomic force microscope, we carried out bending test experiments to determine the Young's modulus and the initial pre-tension of mica nanosheets with thicknesses ranging from 14 layers down to just one bilayer. We found that their Young's modulus is high (190 GPa), in agreement with the bulk value, which indicates that the exfoliation procedure employed to fabricate these nanolayers does not introduce a noticeable amount of defects.…
Hybrid lead halide perovskites with 2D stacking structures have recently emerged as promising materials for optoelectronic applications. We report a method for growing 2D nanosheets of hybrid lead halide perovskites (I, Br and Cl), with tunable lateral sizes ranging from 0.05 to 8 microns, and a structure consisting of n stacked monolayers separated by long alkylamines, tunable from bulk down to n=1. The key to obtaining such a wide range of perovskite properties hinged on utilizing the respective lead halide nanosheets as precursors in a hot-injection synthesis that afforded careful control o…
Motivated by efforts to create thin nanoscale metamaterials and understand atomically thin binary monolayers, we study the finite temperature statistical mechanics of arrays of bistable buckled dilations embedded in free-standing two-dimensional crystalline membranes that are allowed to fluctuate in three dimensions. The buckled nodes behave like discrete, but highly compressible, Ising spins, leading to a phase transition at $T_c$ with singularities in the staggered "magnetization," susceptibility, and specific heat, studied via molecular dynamics simulations. Unlike conventional Ising models…
Experimental evidence for ferromagnetic ordering in isotropic atomically thin two-dimensional crystals has been missing until a bilayer Cr2Ge2Te6, and a three-atom thick monolayer CrI3 are shown to retain ferromagnetic ordering at finite temperatures. Here, we demonstrate successful isolation of a non-van der Waals type ultra-thin nanosheet of FeS2 derived from naturally occurring pyrite mineral (FeS2) by means of liquid-phase exfoliation. Structural characterizations imply that (111) oriented sheets are predominant and is supported theoretically by means of density functional theory surface e…
We report the first detailed characterization of the sheet third-harmonic optical susceptibility, $χ_{s}^{(3)}$, of tungsten diselenide (WSe$_{2}$). With a home-built confocal microscope setup developed to study harmonics generation, we map the second- and third-harmonic intensities as a function of position in the sample, pump power and polarization angle, for single and few layers flakes of WSe$_{2}$. We register a value of $|χ_{s}^{(3)}| \approx$ 0.91 $\times$ 10$^{-28}$ m$^{3}$ V$^{-2}$ at a fundamental excitation frequency of $\hbarω$ = 0.8 eV, which is comparable in magnitude to the thir…
A new two-dimensional (2D) material, borophene (2D boron sheet), has been grown successfully recently on single crystal Ag substrates by two parallel experiments [Mannix \textit{et al., Science}, 2015, \textbf{350}, 1513] [Feng \textit{et al., Nature Chemistry}, 2016, \textbf{advance online publication}]. Three main structures have been proposed ($β_{12}$, $χ_3$ and striped borophene). However, the stability of three structures is still in debate. Using first principles calculations, we examine the dynamical, thermodynamical and mechanical stability of $β_{12}$, $χ_3$ and striped borophene. Fr…
The 3D printing technology offers an innovative approach for developing energy storage devices to create facile and low-cost customized electrodes for modern electronics. Generating electric potential by moving a droplet of ionic solution over two-dimensional (2D) materials is a novel method for rain energy harvesting. This work demonstrated a liquid-solid contact electrification-based 3D printed nanogenerator where raindrop passes through the positively charged ultrathin Gadolinium Telluride (Gd2Te3) sheets. Experimental results showed that voltage as high as ~0.6 V could be generated by movi…
Halide perovskites have emerged as disruptive semiconductors for applications including photovoltaics and light emitting devices, with modular optoelectronic properties realisable through composition and dimensionality tuning. Layered Ruddlesden-Popper perovskites of the form BA2MAn-1PbnI3n+1, where n is the number of lead-halide and methylammonium (MA) sheets spaced by longer butylammonium (BA) cations, are particularly interesting due to their unique two-dimensional character and charge carrier dynamics dominated by strongly bound excitons. However, long-range energy transport through excito…
The discovery of two-dimensional electron gases (2DEGs) in SrTiO3-based heterostructures provides new opportunities for nanoelectronics. Herein, we create a new type of oxide 2DEG by the epitaxial-strain-induced polarization at an otherwise nonpolar perovskite-type interface of CaZrO3/SrTiO3. Remarkably, this heterointerface is atomically sharp, and exhibits a high electron mobility exceeding 60,000 cm2V-1s-1 at low temperatures. The 2DEG carrier density exhibits a critical dependence on the film thickness, in good agreement with the polarization induced 2DEG scheme.
Behaving like atomically-precise two-dimensional quantum wells with non-negligible dielectric contrast, the layered HOIPs have strong electronic interactions leading to tightly bound excitons with binding energies on the order of 500 meV. These strong interactions suggest the possibility of larger excitonic complexes like trions and biexcitons, which are hard to study numerically due to the complexity of the layered HOIPs. Here, we propose and parameterize a model Hamiltonian for excitonic complexes in layered HOIPs and we study the correlated eigenfunctions of trions and biexcitons using a co…
Atomic modulations of two-dimensional materials using scanning tunneling microscope (STM) tip-induced forces modifies their mechanical and electrical properties. In situ topographic and spectroscopic probing through electrical tunneling has been used for straining sheets of graphite, monolayer graphene and NbSe2. The findings also resolve a thirty-five-year-old controversy involving numerous proposed models to explain the source of anomalously high measured atomic amplitudes (of up to 24 Angstroms, expected 0.2 Angstroms) from atomic corrugation on graphite surfaces. Our findings attributes th…
Epitaxial strain imposed in complex oxide thin films by heteroepitaxy is recognized as a powerful tool for identifying new properties and exploring the vast potential of materials performance. A particular example is LaCoO3, a zero spin, nonmagnetic material in the bulk, whose strong ferromagnetism in a thin film remains enigmatic despite a decade of intense research. Here, we use scanning transmission electron microscopy complemented by X-ray and optical spectroscopy to study LaCoO3 epitaxial thin films under different strain states. We observed an unconventional strain relaxation behavior re…
2D hybrid organic-inorganic semiconductors (HOIS) are low-cost, self-assembled semiconductors that have proven to be vital for novel optoelectronic devices due to their inherent stable excitons even at room temperature. 2D HOIS are chemically stable with respect to the 3D analogues, but their inherent anisotropy complicates their implementation in devices, including electroluminescence (EL) devices. We report on the synthesis, characterization, cathodoluminescence and EL of a new 2D HOIS, (4-fluoro phenethylamine-H)2PbBr4, and its defect variations (DVs). The latter, in contrast to the pristin…
The buckling of thin elastic sheets is a classic mechanical instability that occurs over a wide range of scales. In the extreme limit of atomically thin membranes like graphene, thermal fluctuations can dramatically modify such mechanical instabilities. We investigate here the delicate interplay of boundary conditions, nonlinear mechanics and thermal fluctuations in controlling buckling of confined thin sheets under isotropic compression. We identify two inequivalent mechanical ensembles based on the boundaries at constant strain (isometric) or at constant stress (isotensional) conditions.Rema…
Thin elastic sheets bend easily and, if they are patterned with cuts, can deform in sophisticated ways. Here we show that carefully tuning the location and arrangement of cuts within thin sheets enables the design of mechanical actuators that scale down to atomically-thin 2D materials. We first show that by understanding the mechanics of a single, non-propagating crack in a sheet we can generate four fundamental forms of linear actuation: roll, pitch, yaw, and lift. Our analytical model shows that these deformations are only weakly dependent on thickness, which we confirm with experiments at c…
Strongly Enhanced Charge-Density Waves and Correlated Insulating State in Atomically Thin 1$T$-TaS$_2$
Nanjing University（南京大学）；Institute of High Energy Physics, Chinese Academy of Sciences（中国科学院高能物理研究所）；Spallation Neutron Source Science Center（散裂中子源科学中心）；National Institute for Materials Science（国立材料研究所）；Center for Shared Scientific Research Facilities, Nanjing University（南京大学共享科研设施中心）
Strong variations in superconducting critical temperatures in different families of the cuprate perovskites, even with similar hole doping in their copper-oxygen planes, suggest the importance of lattice modulation effects. The one-dimensional incommensurate lattice modulation (ILM) of Bi_2Sr_2CaCu_2O_{8+y}, with the average atomic positions perturbed beyond the unit cell, offers an ideal test ground for studying the interplay between superconductivity and the long-range incommensurate lattice fluctuations. Here we report Scanning nano X-ray Diffraction (SnXRD) imaging of incommensurate lattic…
Hybrid organic-inorganic perovskites have emerged as very promising materials for photonic applications, thanks to the great synthetic versatility that allows to tune their optical properties. In the two-dimensional (2D) crystalline form, these materials behave as multiple quantum-well heterostructures with stable excitonic resonances up to room temperature. In this work strong light-matter coupling in 2D perovskite single-crystal flakes is observed, and the polarization-dependent exciton-polariton response is used to disclose new excitonic features. For the first time, an out-of-plane compone…
We report free-standing atomic crystals that are strictly 2D and can be viewed as individual atomic planes pulled out of bulk crystals or as unrolled single-wall nanotubes. By using micromechanical cleavage, we have prepared and studied a variety of 2D crystals, including single layers of boron nitride, graphite, several dichalcogenides and complex oxides. These atomically-thin sheets (essentially gigantic 2D molecules unprotected from the immediate environment) are stable under ambient conditions, exhibit high crystal quality and are continuous on a macroscopic scale.
The recent discovery of graphene has sparked significant interest, which has so far been focused on the peculiar electronic structure of this material, in which charge carriers mimic massless relativistic particle. However, the structure of graphene - a single layer of carbon atoms densely packed in a honeycomb crystal lattice - is also puzzling. On the one hand, graphene appears to be a strictly two-dimensional (2D) material and exhibits such a high crystal quality that electrons can travel submicron distances without scattering. On the other hand, perfect 2D crystals cannot exist in the free…
First principal investigation of Structural optical and thermoelectric properties of hybrid organic-inorganic perovskite $[NH_3-(CH_2)_4-NH_3]CdCl_4$ compound
Two-dimensional crystals, single sheets of layered materials, often show distinct properties desired for optoelectronic applications, such as larger and direct band gaps, valley- and spinorbit effects. Being atomically thin, the low amount of material is a bottleneck in photophysical and photochemical applications. Here, we propose the formation of stacks of two-dimensional crystals intercalated with small surfactant molecules. We show, using first principles calculations, that already the very short surfactant methyl amine electronically decouples the layers. We demonstrate the indirect-direc…
The prospect of 2-dimensional electron gases (2DEGs) possessing high mobility at room temperature in wide-bandgap perovskite stannates is enticing for oxide electronics, particularly to realize transparent and high-electron mobility transistors. Nonetheless only a small number of studies to date report 2DEGs in BaSnO3-based heterostructures. Here, we report 2DEG formation at the LaScO3/BaSnO3 (LSO/BSO) interface with a room-temperature mobility of 60 cm2/V s at a carrier concentration of 1.7x1013 cm-2. This is an order of magnitude higher mobility at room temperature than achieved in SrTiO3-ba…
We fabricate large-area atomically thin MoS$_2$ layers through the direct transformation of crystalline molybdenum MoS$_2$ (MoO$_3$) by sulfurization at relatively low temperatures. The obtained MoS2 sheets are polycrystalline (~10-20 nm single-crystal domain size) with areas of up to 300x300 um$^2$ with 2-4 layers in thickness and show a marked p-type behaviour. The synthesized films are characterized by a combination of complementary techniques: Raman spectroscopy, X-ray diffraction, transmission electron microscopy and electronic transport measurements.
Recently, perovskite related BaPbO$_3$ has attracted attention due to its hidden topological properties and, moreover, has been used as a thin layer in heterostructures to induce two-dimensional superconductivity. Here we investigate the normal state electronic transport properties of thin films of BaPbO$_3$. Temperature and magnetic field dependent sheet resistances are strongly affected by two-dimensional quantum effects. Our analysis decodes the interplay of spin--orbit coupling, disorder, and electron--electron interaction in this compound. Similar to recently discussed topological materia…
Rapid Atmospheric Vapor Deposition of H:In2O3 Transparent Conducting Oxide Thin Films
University of Oxford（牛津大学）；University of Surrey（萨里大学）；National Taiwan University（台湾大学）；University of Cambridge（剑桥大学）；University of Manchester（曼彻斯特大学）；Sungkyunkwan University（成均馆大学）；Univ. Toulouse, CNRS, Toulouse INP, LGC（图卢兹大学，法国国家科学研究中心，图卢兹第三工业大学，化学实验室）
Beginning with the 'conventional' two-dimensional (2D) quantum wells (QWs) based on III-V and II-VI semiconductors in the 1970s, to the recent atomically-thin sheets of van der Waals materials such as 2D semiconducting transition metal dichalcogenides (TMDCs) and 2D magnets, the research in 2D materials is continuously evolving and providing new challenges. Magnetooptical spectroscopy has played a significant role in this area of research, both from fundamental physics and technological perspectives. A major challenge in 2D semiconductors such as TMDCs is to understand their spin-valley-resolv…
Three-dimensional confinement allows semiconductor quantum dots (QDs) to exhibit size-tunable electronic and optical properties that enable a wide range of opto-electronic applications from displays, solar cells and bio-medical imaging to single-electron devices. Additional modalities such as spin and valley properties can provide further degrees of freedom requisite for quantum information and spintronics. When seeking to combine these material features into QD structures, however, confinement can cause hybridization that inhibits the robustness of these emergent properties for insertion into…
