Strain-induced anion ordering in perovskite oxyfluoride films
Jiayi Wang, Yongjin Shin, Jay R. Paudel, Joseph D. Grassi, Raj K. Sah, Weibing Yang, Evguenia Karapetrova, Abdulhadi Zaidan, Vladimir N. Strocov, Christoph Klew… 展开作者
Jiayi Wang, Yongjin Shin, Jay R. Paudel, Joseph D. Grassi, Raj K. Sah, Weibing Yang, Evguenia Karapetrova, Abdulhadi Zaidan, Vladimir N. Strocov, Christoph Klewe, Padraic Shafer, Alexander X. Gray, James M. Rondinelli, Steven J. May
Anionic ordering is a promising route to engineer physical properties in functional heteroanionic materials. A central challenge in the study of anion-ordered compounds lies in developing robust synthetic strategies to control anion occupation and in understanding the resultant implications for electronic structure. Here, we show that epitaxial strain induces preferential occupation of F and O on the anion sites in perovskite oxyfluoride SrMnO2.5-dFg films grown on different substrates. Under compressive strain, F tends to take the apical-like sites, which was revealed by F and O K-edge linearly polarized x-ray absorption spectroscopy and density functional theory calculations, resulting in an enhanced c-axis expansion. Under tensile strain, F tends to take the equatorial-like sites, enabling the longer Mn-F bonds to lie within the plane. The anion ordered oxyfluoride films exhibit a significant orbital polarization of the 3d electrons, distinct F-site dependence to their valence band density of states, and an enhanced resistivity when F occupies the apical-like anion site compared to the equatorial-like site. By demonstrating a general strategy for inducing anion-site order in oxyfluoride perovskites, this work lays the foundation for future materials design and synthesis efforts that leverage this greater degree of atomic control to realize new polar or quasi-two-dimensional materials.
Photocatalytic water splitting represents a very promising but at the same time very challenging contribution to a clean and renewable route to produce hydrogen fuel. Developing efficient and cost-effective photocatalysts for water splitting is a growing need. For this purpose, semiconductor photocatalysts have attracted much more attention due to their stability and low manufacturing cost. Here, we have systematically applied several state-of-the-art advanced first-principles-based methodologies, viz., hybrid density functional theory, many-body perturbation theory (G$_0$W$_0$) and density fu…
Using first-principle calculations, we restrained the m=1 oxyfluoride Aurivillius Bi$_2$TiO4F$_2$ to adopt three ordered key configurations, such as tetragonal $I4/mmm$ phases with fluorine anions distributed either at the octahedral apical sites or at the octahedral equatorial ones and orthorhombic $Pma2$ phase with fluorine anions distributed over both apical and equatorial sites. We explored the energetics of the metastable phases and their potential for ferroelectricity and found that the least favorable configuration is equatorial sites for fluorine and the most favorable one is the mixtu…
We report the synthesis of SrMnO$_{3-δ}$F$_{γ}$ perovskite oxyfluoride thin films using a vapor transport method to fluorinate as-grown SrMnO$_{2.5}$ epitaxial thin films. The influence of the fluoropolymer, which acts as a fluorine vapor source, was investigated by utilizing polyvinyl fluoride (PVF), polyvinylidene difluoride (PVDF) and polytetrafluoroethylene (PTFE) in the reaction. The same process was carried out with polyethylene (PE) to isolate the role of carbon in the vapor transport process. The F distribution was probed by X-ray photoemission spectroscopy, which confirmed the incorpo…
Organic or inorganic (A) metal (M) halide (X) perovskites (AMX3) are semiconductor materials setting the basis for the development of highly efficient, low-cost and multijunction solar energy conversion devices. The best efficiencies nowadays are obtained with mixed compositions containing methylammonium, formamidinium, Cs and Rb as well as iodine, bromine and chlorine as anions. The understanding of fundamental properties such as crystal structure and its effect on the band gap, as well as their phase stability is essential. In this systematic study X-ray diffraction and photoluminescense spe…
Anion exchange offers great flexibility and high precision in phase control, compositional engineering and optoelectronic property tuning. Different from previous successful anion exchange process in liquid solution, herein, we develop a vapor-phase anion-exchange strategy to realize the precise phase and bandgap control of large-scale inorganic perovskites by using gas injection cycle, produing some perovskites such as CsPbCl3 which has never been reported in thin film morphology. Ab-initio calculations also provide the insightful mechanism to understand the impact of anion exchange on tuning…
The electronic orbital characteristics at the band edges plays an important role in determining the electrical, optical and defect properties of perovskite photovoltaic materials. It is highly desirable to establish the relationship between the underlying atomic orbitals and the optoelectronic properties as a guide to maximize the photovoltaic performance. Here, using first-principles calculations and taking anion ordered Ruddlesden-Popper (RP) phase halide perovskites Cs$_{n+1}$Ge$_n$I$_{n+1}$Cl$_{2n}$ as an example, we demonstrate how to rationally optimize the optoelectronic properties (e.g…
Enhancing carrier transfer properties of Na-rich anti-perovskites, Na4OM2 with tetrahedral anion groups: an evaluation through first-principles computational analysis
Compositionally tunable vanadium oxyhydrides Sr2VO4-xHx (x = 0 - 1) without considerable anion vacancy were synthesized by high-pressure solid state reaction. The crystal structures and their properties were characterized by powder neutron diffraction, synchrotron X-ray diffraction, thermal desorption spectroscopy, and first-principles density functional theory (DFT) calculations. The hydrogen anions selectively replaced equatorial oxygen sites in the VO6 layers via statistical substitution of hydrogen in the low x region (x < 0.2). A new orthorhombic phase (Immm) with an almost entirely hydro…
Mixed-anion mixed-cation perovskites with (FAPbI$_3$)$_{1-x}$(MAPbBr$_3$)$_x$ composition have allowed record efficiencies in photovoltaic solar cells, but their atomic-scale behaviour is not well understood yet, in part because their theoretical modelling requires consideration of complex and interrelated dynamic and disordering effects. We present here an ab initio molecular dynamics investigation of the structural, thermodynamic, and electronic properties of the (FAPbI$_3$)$_{0.875}$(MAPbBr$_3$)$_{0.125}$ perovskite. A special quasi-random structure is proposed to mimic the disorder of both…
Contrary to the common belief that light-induced halide ion segregation in a mixed halide al-loy occurs within the illuminated area, we find that the Br ions released by light diffuse away from the area, which generates a counter-balancing Coulombic force between the anion deficit and surplus region, together resulting in a macro/mesoscopic size anion ring surrounding the center, showing a photoluminescence ring. Upon removing the illumination, the displaced anions return to the illuminated area, and the restoring force leads to a damped ultra-low-frequency oscillatory ion motion, which may be…
Lead halide perovskite nanocrystals (NCs) are currently emerging as one of the most interesting solution processed semiconductors since they possess high photoluminescence quantum yield (PLQY), and colour tunability through anion exchange reactions or quantum confinement. Here, we show efficient solar cells based on mixed halide (CsPbBrI2) NCs obtained via anion exchange reactions in ambient conditions. We performed anion exchange reactions in concentrated NC solutions with I-, thus inducing a PL red-shift up to 676 nm, and obtaining a high PLQY in film (65%). Solar cell devices operating in t…
Anion Ordering and Phase Stability Govern Optical Band Gaps in BaZr(S,Se)3
Chalmers University of Technology（查尔姆斯理工大学）；Massachusetts Institute of Technology（麻省理工学院）；Northumbria University（诺森比亚大学）；University College London（伦敦大学学院）
The band gap of SrTiO$_{3}$ retards its photocatalytic application. Regardless narrowing the band gap of the anion doped SrTiO$_{3}$, the anion doping structures have low photoconversion efficiency. The co-cation dopings are used to modify the band gap and band edges positions of SrTiO$_{3}$ to enhance the photocatalyitic properties by extending the absorption to longer visible-light. Using density functional calculations with the Heyd-Scuseria-Ernzerhof (HSE06) hybrid functional for exchange-correlation, the crystal and electronic structures as well as the optical properties of the mono and c…
The perovskite oxynitride LaTiO\textsubscript{2}N is a promising material for photocatalytic water splitting under visible light. One of the obstacles towards higher efficiencies of this and similar materials stems from charge-carrier recombination, which could be suppressed by the built-in electric field in polar materials. In this study, we investigate the spontaneous polarization in epitaxially strained LaTiO\textsubscript{2}N thin films via density functional theory calculations. The effect of epitaxial strain on the anion order, resulting out-of-plane polarization, energy barriers for pol…
We use a group theoretical approach to enumerate the possible couplings between magnetism and ferroelectric polarisation in the parent $Pm\bar{3}m$ perovskite structure. We show that third order magnetoelectric coupling terms must always involve magnetic ordering at the A and B-site which either transforms both as R-point or both as X-point time odd irreducible representations (irreps). For fourth order couplings we demonstrate that this criterion may be relaxed allowing couplings involving irreps at X, M and R-points which collectively conserve crystal momentum, producing a magnetoelectric ef…
We report the synthesis and characterization of a novel class of ionic semiconductor materials- inorganic chalcogenide perovskites. Several different compounds including BaZrS3, CaZrS3, SrTiS3 and SrZrS3 were synthesized by high temperature sulfurization of their oxide counterparts. Their crystal structures were identified by XRD and composition by EDX. UV-vis and photoluminescence measurements confirmed that they are direct gap semiconductors with band gap values consistent with theoretical predictions. By adopting an anion alloying approach, we demonstrate widely tunable band gap from 1.73 e…
Multiferroics are a unique class of materials where magnetic and ferroelectric orders coexist. The research on multiferroics contributes significantly to the fundamental understanding of the strong correlations between different material degrees of freedom and provides an energy-efficient route toward the electrical control of magnetism. While multiple ABO3 oxide perovskites have been identified as being multiferroic, their magnetoelectric coupling strength is often weak, necessitating the material search in different compounds. Here, we report the observation of room-temperature multiferroic …
The impact of ordered vacancies on the dynamic stability of perovskites is investigated under the $\textit{ab initio}$ framework with a focus on cubic BaFeO$_{3}$ ($Pm\bar{3}m$) and vacancy-ordered monoclinic BaFeO$_{2.67}$ ($P2_{1}/m$). The harmonic approximation shows that both structures are dynamically unstable at 0 K. For the monoclinic structure, the instability is related to rotational distortions of the Fe coordination tetrahedra near the ordered vacancies. $\textit{Ab initio}$ molecular dynamics simulations in combination with the introduced structural descriptor demonstrate that both…
Inorganic metal-halide cubic perovskite semiconductors have become more popular in industrial applications of photovoltaic and optoelectronic devices. Among various perovskites, lead-free materials are currently most explored due to their non-toxic effect on the environment. In this study, the structural, electronic, optical, and mechanical properties of lead-free cubic perovskite materials FrBX3 (B = Ge, Sn; X = Cl, Br, I) are investigated through first-principles density-functional theory (DFT) calculations. These materials are found to exhibit semiconducting behavior with direct bandgap ene…
Organic-inorganic lead halide perovskites containing a mixture of iodide and bromide anions consistently perform better in donor-acceptor heterojunction solar cells than the standard methylammonium lead triiodide material. This observation is counterintuitive, as it is generally expected for photovoltaic materials that heterogeneities and compositional disorder cause reduced carrier diffusion length and conversion efficiency. Here, we combine ultrafast photoinduced electroabsorption and broadband fluorescence up-conversion spectroscopy measurements to scrutinize the carrier dynamics in mixed-c…
Novel halide perovskites with improved stability and optoelectronic properties can be designed via composition engineering at cation and/or anion sites. Data-driven methods, especially high-throughput first principles computations and subsequent analysis based on unique materials descriptors, are key to achieving this goal. In this work, we report a density functional theory (DFT) based dataset of 495 $ABX_3$ halide perovskite compounds, with various atomic and molecular species considered at A, B and X sites, and different amounts of mixing applied at each site using the special quasirandom s…
We identify the existence of nonlinear optical (NLO) activity in a number of novel $ABX_3$-type metal-free perovskites, where $A$ is a highly tuneable organic cation, $B$ is a NH$_4$ cation and $X$ a halide anion. Through systematic first-principles calculations, we identify important trends to chart the second-harmonic generation of this class of materials. We study three perovskites MDABCO-NH$_4$I$_3$, CNDABCO-NH$_4$I$_3$ and ODABCO-NH$_4$I$_3$ for use as deep-UV second-harmonic generation materials. We identify the role of the dipole moment imparted by the organic group on the $A$ cation as…
The presence of a switchable spontaneous electric polarization makes ferroelectrics ideal candidates for the use in many applications such as memory and sensors devices. Since known ferroelectrics are rather limited, finding new ferroelectric (FE) materials has become a flourishing field. One promising route is to design the so-called hybrid improper ferroelectricity. However, the previous approach based on the Landau theory is not easily adopted to the systems that are unrelated to the Pbnm perovskite structure. To this end, we develop a general design rule that is applicable to any systems. …
Can Strain or Anion Interchange Make an Unstable Structure Stable? Energetics, Lattice Dynamics and Strain-Tunable Band Gaps of Lithium Chalcohalide Antiperovskites (Li$_{3}$$BA$) and their Anion Interchange Variants (Li$_{3}$$AB$)
Hybrid perovskites with mixed organic cations such as methylammonium and formamidinium have attracted interest due to their improved stability and capability to tune their properties varying the composition. In this work we report on the local variation of the structural and electronic properties in mixed A-site cation MA/FA lead iodide perovskites FAXMA1-XPBI3 evaluated from static first-principles calculations in certain structures where the orientations of organic cations result from examining the energy landscape of some compositions. The cation replacement at the A-site to form the solid …
Structural stability, electronic structure, and magnetism of the $d^9$ double infinite-layer La$_3$Ni$_2$O$_5$F under chemical pressure and epitaxial strain
The interfacial structure of SrZr$_{x}$Ti$_{1-x}$O$_3$ films grown on semiconducting Ge substrates are investigated by synchrotron X-ray diffraction and first-principles density functional theory. By systematically tuning Zr content x, the effects of bonding at the interface and epitaxial strain on the physical structure of the film can be distinguished. The interfacial perovskite layers are found to be polarized as a result of cation-anion ionic displacements perpendicular to the perovskite/semiconductor interface. We find a correlation between the observed buckling and valence band offsets a…
Perovskite oxynitrides are a promising class of material for photocatalytic water-splitting due to their small band gaps and suitably aligned band edges. Recently, epitaxially strained oxynitrides started to attract interest due to the possibility to engineer the anion order and ferroelectric distortions. However, contrary to oxides there have been no studies on the band-gap evolution in oxynitrides with epitaxial strain. Here, we investigate, using density functional theory calculations, the influence of epitaxial strain on the band gap of two different oxynitrides and compare our results wit…
Confinement of electron holes via the peroxo group formation in the negative charge-transfer materials on the example of SrFeO3: plane-wave density functional theory predictions
