We consider the usage of finite-length polar codes for the Gaussian multiple access channel (GMAC) with a finite number of users. Based on the interleave-division multipleaccess (IDMA) concept, we implement an iterative detection and decoding non-orthogonal multiple access (NOMA) receiver that benefits from a low complexity, while scaling (almost) linearly with the amount of active users. We further show the conceptual simplicity of the belief propagation (BP)-based decoder in a step-by-step illustration of its construction. Beyond its conceptual simplicity, this approach benefits from an improved performance when compared to some recent work tackling the same problem, namely the setup of finite-length forward errorcorrection (FEC) codes for finite-number of users. We consider the 5th generation mobile communication (5G) polar code with a block length $N = 512$ applied to both a two-user and a four-user GMAC scenario with a sum-rate of $R_{sum} = 0.5$ and $R_{sum} = 1$, respectively. Simulation results show that a BP-based soft interference cancellation (SoIC) receiver outperforms a joint successive cancellation (JSC) scheme. Finally, we investigate the effect of a concatenated repetition code which suggests that alternative polar code design rules are required in multi-user scenarios.
We propose a modified iterative bounded distance decoding of product codes. The proposed algorithm is based on exchanging hard messages iteratively and exploiting channel reliabilities to make hard decisions at each iteration. Performance improvements up to 0.26 dB are achieved.
This paper presents a generalized construction of RS-SPC product codes. A low-complexity joint-decoding scheme is proposed for these codes, in which a BP-based iterative decoding is performed based on the binary expansion of the whole parity-check matrix. Various powerful RS codes can be used as the component codes for RS-SPC product codes, which gives a good performance for local decoding (decode a single component codeword). The proposed BP-based iterative decoding is a global decoding, and it achieves an error-correcting capability comparable to codes of large blocklengths. This two-phase d…
We use density evolution to optimize the parameters of binary product codes (PCs) decoded based on the recently introduced iterative bounded distance decoding with scaled reliability. We show that binary PCs with component codes of 3-bit error correcting capability provide the best performance-complexity trade-off.
Fountain codes are erasure correcting codes realizing reliable communication systems for the multicast on the Internet. The zigzag decodable fountain (ZDF) code is one of generalization of the Raptor code, i.e, applying shift operation to generate the output packets. The ZDF code is decoded by a two-stage iterative decoding algorithm, which combines the packet-wise peeling algorithm and the bit-wise peeling algorithm. By the bit-wise peeling algorithm and shift operation, ZDF codes outperform Raptor codes under iterative decoding in terms of decoding erasure rate and overhead. However, the bit…
In this work, we consider the problem of reduced latency of low-density parity-check (LDPC) codes with iterative detection and decoding (IDD) receiver in multiuser multiple-antenna systems. The proposed knowledge-aided IDD (KA-IDD) system employs a minimum mean-square error detector with refined iterative processing and a reweighted belief propagation (BP) decoding algorithm. We present reweighted BP decoding algorithms, which exploit the knowledge of short cycles in the graph structure and reweighting factors derived from the expansion of hypergraphs. Simulation results show that the proposed…
We propose a decoder for Trellis-Constrained Codes, a super-class of Turbo- and LDPC codes. Inspired by amplitude amplification from quantum computing, we attempt to amplify the relative likelihood of the most likely codeword until it stands out from all other codewords.
It is speculated that the most probable channel noise realizations (instantons) that cause the iterative decoding of low-density parity-check codes to fail make the decoding not to converge. The Wiberg's formula is generalized for the case when the part of a computational tree that contributes to the output at its center is ambiguous. Two methods of finding the instantons for large number of iterations are presented and tested on Tanner's [155, 64, 20] code and Gaussian channel. The inherently dynamic instanton with effective distance of 11.475333 is found.
A variety of low-density parity-check (LDPC) ensembles have now been observed to approach capacity with message-passing decoding. However, all of them use soft (i.e., non-binary) messages and a posteriori probability (APP) decoding of their component codes. In this paper, we show that one can approach capacity at high rates using iterative hard-decision decoding (HDD) of generalized product codes. Specifically, a class of spatially-coupled GLDPC codes with BCH component codes is considered, and it is observed that, in the high-rate regime, they can approach capacity under the proposed iterativ…
Guessing Random Additive Noise Decoding (GRAND) is a universal decoding algorithm that can be used to perform maximum likelihood decoding. It attempts to find the errors introduced by the channel by generating a sequence of possible error vectors in order of likelihood of occurrence and applying them to the received vector. Ordered reliability bits GRAND (ORBGRAND) integrates soft information received from the channel to refine the error vector sequence. In this work, ORBGRAND is modified to produce a soft output, to enable its use as an iterative soft-input soft-output (SISO) decoder. Three t…
Sparse code multiple access (SCMA) is a promising multiplexing approach to achieve high system capacity. In this paper, we develop a novel iterative detection and decoding scheme for SCMA systems combined with Low-density Parity-check (LDPC) decoding. In particular, we decompose the output of the message passing algorithm (MPA) based SCMA multiuser detection into intrinsic part and prior part. Then we design a joint detection and decoding scheme which iteratively exchanges the intrinsic information between the detector and the decoder, yielding a satisfied performance gain. Moreover, the propo…
In this paper, a multi-antenna assisted virtual full-duplex (FD) relaying with reliability-aware iterative decoding at destination node is proposed to improve system spectral efficiency and reliability. This scheme enables two half-duplex relay nodes, mimicked as FD relaying, to alternatively serve as transmitter and receiver to relay their decoded data signals regardless the decoding errors, meanwhile, cancel the inter-relay interference with QR-decomposition. Then, by deploying the reliability-aware iterative detection/decoding process, destination node can efficiently mitigate inter-frame i…
In this paper, we develop a density evolution (DE) framework for analyzing the iterative joint decoding (JD) for non-orthogonal multiple access (NOMA) systems, where the ordered-statistics decoding (OSD) is applied to decode short block codes. We first investigate the density-transform feature of the soft-output OSD (SOSD), by deriving the density of the extrinsic log-likelihood ratio (LLR) with known densities of the priori LLR. Then, we represent the OSD-based JD by bipartite graphs (BGs), and develop the DE framework by characterizing the density-transform features of nodes over the BG. Num…
Spatial coupling is utilized to improve the performance of iterative channel estimation, multiuser detection, and decoding for multiple-input multiple-input (MIMO) bit-interleaved coded modulation (BICM). Coupling is applied to both coding and BICM---the encoder uses a protograph-based spatially-coupled low-density parity-check (SC LDPC) code. Spatially and temporally coupled (STC) BICM is proposed to enable iterative channel estimation via coupling. Linear minimum mean-squared error (LMMSE) estimation is applied for both channel estimation and detection to reduce the complexity. Tractable den…
The form of Dueck and Körner's exponent function for correct decoding probability for discrete memoryless channels at rates above the capacity is similar to the form of Csiszár and Körner's exponent function for correct decoding probability in lossy source coding for discrete memoryless sources at rates below the rate distortion function. We recently gave a new algorithm for computing Dueck and Körner's exponent. In this paper, we give an algorithm for computing Csiszár and Körner's exponent. The proposed algorithm can be also used to compute cutoff rate and the rate distortion function.
In this paper, we propose a new coded computing technique called "substitute decoding" for general iterative distributed computation tasks. In the first part of the paper, we use PageRank as a simple example to show that substitute decoding can make the computation of power iterations solving PageRank on sparse matrices robust to erasures in distributed systems. For these sparse matrices, codes with dense generator matrices can significantly increase storage costs and codes with low-density generator matrices (LDGM) are preferred. Surprisingly, we show through both theoretical analysis and sim…
Reed-Muller (RM) codes are known for their good maximum likelihood (ML) performance in the short block-length regime. Despite being one of the oldest classes of channel codes, finding a low complexity soft-input decoding scheme is still an open problem. In this work, we present a belief propagation (BP) decoding architecture for RM codes based on their rich automorphism group. The decoding algorithm can be seen as a generalization of multiple-bases belief propagation (MBBP) using polar BP as constituent decoders. We provide extensive error-rate performance simulations and compare our results t…
We analyze a class of high performance, low decoding-data-flow error-correcting codes suitable for high bit-rate optical-fiber communication systems. A spatially-coupled split-component ensemble is defined, generalizing from the most important codes of this class, staircase codes and braided block codes, and preserving a deterministic partitioning of component-code bits over code blocks. Our analysis focuses on low-complexity iterative algebraic decoding, which, for the binary erasure channel, is equivalent to a generalization of the peeling decoder. Using the differential equation method, we …
Low-resolution precoding techniques have gained considerable attention in the wireless communications area recently. Vital but hardly discussed in literature, discrete precoding in conjunction with channel coding is the subject of this study. Unlike prior studies, we propose three different soft detection methods and an iterative detection and decoding scheme that allow the utilization of channel coding in conjunction with low-resolution precoding. Besides an exact approach for computing the extrinsic information, we propose two approximations with reduced computational complexity. Numerical r…
This paper proposes an iterative detection and decoding (IDD) scheme for a cell free massive multiple input multiple output (CF-mMIMO) system. Users send coded data to the access points (APs), which is jointly detected at central processing unit (CPU). The symbols are exchanged iteratively in the form of log likelihood ratios (LLRs) between the detector and the low-density parity check codes (LPDC) decoder, increasing the coded system's performance. We propose a list-based multi-feedback diversity with successive interference cancellation (MF-SIC) to improve the performance of the CF-mMIMO. Fu…
Non-binary low-density parity-check (LDPC) codes have some advantages over their binary counterparts, but unfortunately their decoding complexity is a significant challenge. The iterative hard- and soft-reliability based majority-logic decoding algorithms are attractive for non-binary LDPC codes, since they involve only finite field additions and multiplications as well as integer operations and hence have significantly lower complexity than other algorithms. In this paper, we propose two improvements to the majority-logic decoding algorithms. Instead of the accumulation of reliability informa…
We survey the known list decoding algorithms for polar codes and compare their complexity. Index terms: Polar codes; Reed-Muller codes; successive cancellation decoding.
For finite coupling lengths, terminated spatially coupled low-density parity-check (SC-LDPC) codes show a non-negligible rate-loss. In this paper, we investigate if this rate loss can be mitigated by tail-biting SC-LDPC codes in conjunction with iterative demapping of higher order modulation formats. Therefore, we examine the BP threshold of different coupled and uncoupled ensembles. A comparison between the decoding thresholds approximated by EXIT charts and the density evolution results of the coupled and uncoupled ensemble is given. We investigate the effect and potential of different label…
Semi-definite relaxation (SDR) detector has been demonstrated to be successful in approaching maximum likelihood (ML) performance while the time complexity is only polynomial. We propose a new receiver jointly utilizing the forward error correction (FEC) code information in the SDR detection process. Strengthened by the code constraints, the joint SDR detector provides soft information of much improved reliability to downstream decoder and therefore outperforms existing receivers with substantial gain.
We present a novel iterative detection and decoding scheme for the uplink of large-scale multiuser multiple-antenna systems. In order to reduce the receiver's energy consumption and computational complexity, 1-bit analog-to-digital converters are used in the front-end. The performance loss due to the 1-bit quantization can be mitigated by using large-scale antenna arrays. We propose a linear low-resolution-aware minimum mean square error detector for soft multiuser interference mitigation. Moreover, short block length low-density parity-check codes are considered for avoiding high latency. In …
An efficient implementation of min-sum SC/list decoding of convolutional polar codes is proposed. The complexity of the proposed implementation of SC decoding is more than two times smaller than the straightforward implementation. Moreover, the proposed list decoding algorithm does not require to copy any LLRs during decoding.
We propose iterative detection and decoding (IDD) algorithms with Low-Density Parity-Check (LDPC) codes for Multiple Input Multiple Output (MIMO) systems operating in block-fading and fast Rayleigh fading channels. Soft-input soft-output minimum mean-square error receivers with successive interference cancellation are considered. In particular, we devise a novel strategy to improve the bit error rate (BER) performance of IDD schemes, which takes into account the soft \textit{a posteriori} output of the decoder in a block-fading channel when Root-Check LDPC codes are used. A MIMO IDD receiver w…
In this paper we deal with polar code automorphisms that are beneficial under low-latency automorphism ensemble (AE) decoding, and we propose polar code designs that have such automorphisms. Successive-cancellation (SC) decoding and thus SC-based AE decoding are invariant with respect to the only known polar code automorphisms, namely those of the lower-triangular affine (LTA) group. To overcome this problem, we provide methods to determine whether a given polar code has non-LTA automorphisms and to identify such automorphisms. Building on this, we design specific polar codes that admit automo…
We exploit the redundancy of the language-based source to help polar decoding. By judging the validity of decoded words in the decoded sequence with the help of a dictionary, the polar list decoder constantly detects erroneous paths after every few bits are decoded. This path-pruning technique based on joint decoding has advantages over stand-alone polar list decoding in that most decoding errors in early stages are corrected. In order to facilitate the joint decoding, we first propose a construction of dynamic dictionary using a trie and show an efficient way to trace the dictionary during de…
