Alireza Sheikh, Alexandre Graell i Amat, Gianluigi Liva, Alex Alvarado
We use density evolution to optimize the parameters of binary product codes (PCs) decoded based on the recently introduced iterative bounded distance decoding with scaled reliability. We show that binary PCs with component codes of 3-bit error correcting capability provide the best performance-complexity trade-off.
机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。
继续探索
We propose a modified iterative bounded distance decoding of product codes. The proposed algorithm is based on exchanging hard messages iteratively and exploiting channel reliabilities to make hard decisions at each iteration. Performance improvements up to 0.26 dB are achieved.
Improved Chase-Pyndiah Decoding for Product Codes with Scaled Messages
本文提出一种改进的Chase-Pyndiah解码器，通过基于组件解码器置信度缩放外源信息，实现比原始解码器0.1 dB的增益，且复杂度增加 negligible。
The problem of designing high rate, full diversity noncoherent space-time block codes (STBCs) with low encoding and decoding complexity is addressed. First, the notion of $g$-group encodable and $g$-group decodable linear STBCs is introduced. Then for a known class of rate-1 linear designs, an explicit construction of fully-diverse signal sets that lead to four-group encodable and four-group decodable differential scaled unitary STBCs for any power of two number of antennas is provided. Previous works on differential STBCs either sacrifice decoding complexity for higher rate or sacrifice rate …
Iteration-Dependent Scaled Min-Sum Decoding for Low-Complexity Key Reconciliation in CV-QKD
本研究提出适用于CV-QKD低码率LDPC码的依赖迭代缩放最小和译码方法，在接近和积算法性能的同时降低复杂度，推动CV-QKD硬件落地。
Min-Sum decoding is widely used for decoding LDPC codes in many modern digital video broadcasting decoding due to its relative low complexity and robustness against quantization error. However, the suboptimal performance of the Min-Sum affects the integrated performance of wireless receivers. In this paper, we present the idea of adapting the scaling factor of the Min-Sum decoder with iterations through a simple approximation. For the ease of implementation the scaling factor can be changed in a staircase fashion. The stair step is designed to optimize the decoder performance and the required …
The goal of the present paper is the derivation of a framework for the finite-length analysis of message-passing iterative decoding of low-density parity-check codes. To this end we introduce the concept of graph-cover decoding. Whereas in maximum-likelihood decoding all codewords in a code are competing to be the best explanation of the received vector, under graph-cover decoding all codewords in all finite covers of a Tanner graph representation of the code are competing to be the best explanation. We are interested in graph-cover decoding because it is a theoretical tool that can be used to…
Iterative decoding was not originally introduced as the solution to an optimization problem rendering the analysis of its convergence very difficult. In this paper, we investigate the link between iterative decoding and classical optimization techniques. We first show that iterative decoding can be rephrased as two embedded minimization processes involving the Fermi-Dirac distance. Based on this new formulation, an hybrid proximal point algorithm is first derived with the additional advantage of decreasing a desired criterion. In a second part, an hybrid minimum entropy algorithm is proposed w…
This paper presents a generalized construction of RS-SPC product codes. A low-complexity joint-decoding scheme is proposed for these codes, in which a BP-based iterative decoding is performed based on the binary expansion of the whole parity-check matrix. Various powerful RS codes can be used as the component codes for RS-SPC product codes, which gives a good performance for local decoding (decode a single component codeword). The proposed BP-based iterative decoding is a global decoding, and it achieves an error-correcting capability comparable to codes of large blocklengths. This two-phase d…
This paper presents new FEC codes for the erasure channel, LDPC-Band, that have been designed so as to optimize a hybrid iterative-Maximum Likelihood (ML) decoding. Indeed, these codes feature simultaneously a sparse parity check matrix, which allows an efficient use of iterative LDPC decoding, and a generator matrix with a band structure, which allows fast ML decoding on the erasure channel. The combination of these two decoding algorithms leads to erasure codes achieving a very good trade-off between complexity and erasure correction capability.
In this paper, we introduce an efficient iterative solver for the joint linear-programming (LP) decoding of low-density parity-check (LDPC) codes and finite-state channels (FSCs). In particular, we extend the approach of iterative approximate LP decoding, proposed by Vontobel and Koetter and explored by Burshtein, to this problem. By taking advantage of the dual-domain structure of the joint decoding LP, we obtain a convergent iterative algorithm for joint LP decoding whose structure is similar to BCJR-based turbo equalization (TE). The result is a joint iterative decoder whose complexity is s…
In this paper, we propose a novel low complexity scaling strategy of min-sum decoding algorithm for irregular LDPC codes. In the proposed method, we generalize our previously proposed simplified Variable Scaled Min-Sum (SVS-min-sum) by replacing the sub-optimal starting value and heuristic update for the scaling factor sequence by optimized values. Density evolution and Nelder-Mead optimization are used offline, prior to the decoding, to obtain the optimal starting point and per iteration updating step size for the scaling factor sequence of the proposed scaling strategy. The optimization of t…
Fountain codes are erasure correcting codes realizing reliable communication systems for the multicast on the Internet. The zigzag decodable fountain (ZDF) code is one of generalization of the Raptor code, i.e, applying shift operation to generate the output packets. The ZDF code is decoded by a two-stage iterative decoding algorithm, which combines the packet-wise peeling algorithm and the bit-wise peeling algorithm. By the bit-wise peeling algorithm and shift operation, ZDF codes outperform Raptor codes under iterative decoding in terms of decoding erasure rate and overhead. However, the bit…
An algorithm of improving the performance of iterative decoding on perpendicular magnetic recording is presented. This algorithm follows on the authors' previous works on the parallel and serial concatenated turbo codes and low-density parity-check codes. The application of this algorithm with signal-to-noise ratio mismatch technique shows promising results in the presence of media noise. We also show that, compare to the standard iterative decoding algorithm, an improvement of within one order of magnitude can be achieved.
In this paper, a generalization of parallel concatenated block GPCB codes based on BCH and RS codes is presented.
In this work, we consider the problem of reduced latency of low-density parity-check (LDPC) codes with iterative detection and decoding (IDD) receiver in multiuser multiple-antenna systems. The proposed knowledge-aided IDD (KA-IDD) system employs a minimum mean-square error detector with refined iterative processing and a reweighted belief propagation (BP) decoding algorithm. We present reweighted BP decoding algorithms, which exploit the knowledge of short cycles in the graph structure and reweighting factors derived from the expansion of hypergraphs. Simulation results show that the proposed…
Spatially coupled (SC) interleaving is proposed to improve the performance of iterative multiuser detection and decoding (MUDD) for quasi-static fading multiple-input multiple-output systems. The linear minimum mean-squared error (LMMSE) demodulator is used to reduce the complexity and to avoid error propagation. Furthermore, sliding window MUDD is proposed to circumvent an increase of the decoding latency due to SC interleaving. Theoretical and numerical analyses show that SC interleaving can improve the performance of the iterative LMMSE MUDD for regular low-density parity-check codes.
We propose a decoder for Trellis-Constrained Codes, a super-class of Turbo- and LDPC codes. Inspired by amplitude amplification from quantum computing, we attempt to amplify the relative likelihood of the most likely codeword until it stands out from all other codewords.
It is speculated that the most probable channel noise realizations (instantons) that cause the iterative decoding of low-density parity-check codes to fail make the decoding not to converge. The Wiberg's formula is generalized for the case when the part of a computational tree that contributes to the output at its center is ambiguous. Two methods of finding the instantons for large number of iterations are presented and tested on Tanner's [155, 64, 20] code and Gaussian channel. The inherently dynamic instanton with effective distance of 11.475333 is found.
In this paper, we consider the problem of iterative detection and decoding (IDD) for multi-antenna systems using low-density parity-check (LDPC) codes. The proposed IDD system consists of a soft-input soft-output parallel interference (PIC) cancellation scheme with linear minimum mean-square error (MMSE) receive filters and two novel belief propagation (BP) decoding algorithms. The proposed BP algorithms exploit the knowledge of short cycles in the graph structure and the reweighting factors derived from the hypergraph's expansion. Simulation results show that when used to perform IDD for mult…
We show how Gabidulin codes can be list decoded by using an iterative parametrization approach. For a given received word, our decoding algorithm processes its entries one by one, constructing four polynomials at each step. This then yields a parametrization of interpolating solutions for the data so far. From the final result a list of all codewords that are closest to the received word with respect to the rank metric is obtained.
We propose the application of multiple-bases belief-propagation, an optimized iterative decoding method, to a set of rate-1/2 LDPC codes from the IEEE 802.16e WiMAX standard. The presented approach allows for improved decoding performance when signaling over the AWGN channel. As all required operations for this method can be run in parallel, the decoding delay of this method and standard belief-propagation decoding are equal. The obtained results are compared to the performance of LDPC codes optimized with the progressive edge-growth algorithm and to bounds from information theory. It will be …
A variety of low-density parity-check (LDPC) ensembles have now been observed to approach capacity with message-passing decoding. However, all of them use soft (i.e., non-binary) messages and a posteriori probability (APP) decoding of their component codes. In this paper, we show that one can approach capacity at high rates using iterative hard-decision decoding (HDD) of generalized product codes. Specifically, a class of spatially-coupled GLDPC codes with BCH component codes is considered, and it is observed that, in the high-rate regime, they can approach capacity under the proposed iterativ…
Guessing Random Additive Noise Decoding (GRAND) is a universal decoding algorithm that can be used to perform maximum likelihood decoding. It attempts to find the errors introduced by the channel by generating a sequence of possible error vectors in order of likelihood of occurrence and applying them to the received vector. Ordered reliability bits GRAND (ORBGRAND) integrates soft information received from the channel to refine the error vector sequence. In this work, ORBGRAND is modified to produce a soft output, to enable its use as an iterative soft-input soft-output (SISO) decoder. Three t…
Sparse code multiple access (SCMA) is a promising multiplexing approach to achieve high system capacity. In this paper, we develop a novel iterative detection and decoding scheme for SCMA systems combined with Low-density Parity-check (LDPC) decoding. In particular, we decompose the output of the message passing algorithm (MPA) based SCMA multiuser detection into intrinsic part and prior part. Then we design a joint detection and decoding scheme which iteratively exchanges the intrinsic information between the detector and the decoder, yielding a satisfied performance gain. Moreover, the propo…
An iterative algorithm is presented for soft-input-soft-output (SISO) decoding of Reed-Solomon (RS) codes. The proposed iterative algorithm uses the sum product algorithm (SPA) in conjunction with a binary parity check matrix of the RS code. The novelty is in reducing a submatrix of the binary parity check matrix that corresponds to less reliable bits to a sparse nature before the SPA is applied at each iteration. The proposed algorithm can be geometrically interpreted as a two-stage gradient descent with an adaptive potential function. This adaptive procedure is crucial to the convergence beh…
In this paper, we present an iterative soft-decision decoding algorithm for Reed-Solomon codes offering both complexity and performance advantages over previously known decoding algorithms. Our algorithm is a list decoding algorithm which combines two powerful soft decision decoding techniques which were previously regarded in the literature as competitive, namely, the Koetter-Vardy algebraic soft-decision decoding algorithm and belief-propagation based on adaptive parity check matrices, recently proposed by Jiang and Narayanan. Building on the Jiang-Narayanan algorithm, we present a belief-pr…
The belief propagation algorithm has been recognized in the information theory community as a soft-decision iterative decoding algorithm. It is the most powerful algorithm found so far for attacking hard optimization problems in channel decoding. Quantum mechanics is the foundation of modern physics with the time-independent Schrodinger equation being one of the most important equations. This paper shows that the equation can be derived from a generalized belief propagation algorithm. Such a connection on a mathematical basis might shed new insights into the foundations of quantum mechanics an…
In this paper, we consider a few iterative decoding schemes for the joint source-channel coding of correlated sources. Specifically, we consider the joint source-channel coding of two erasure correlated sources with transmission over different erasure channels. Our main interest is in determining whether or not various code ensembles can achieve the capacity region universally over varying channel conditions. We consider two ensembles in the class of low-density generator-matrix (LDGM) codes known as Luby-Transform (LT) codes and one ensemble of low-density parity-check (LDPC) codes. We analyz…
In this paper we study the impact of the processing order of nodes of a bipartite graph, on the performance of an iterative message-passing decoding. To this end, we introduce the concept of neighborhood reliabilities of graph's nodes. Nodes reliabilities are calculated at each iteration and then are used to obtain a processing order within a serial or serial/parallel scheduling. The basic idea is that by processing first the most reliable data, the decoder is reinforced before processing the less reliable one. Using neighborhood reliabilities, the Min-Sum decoder of LDPC codes approaches the …
Departing from traditional communication theory where decoding algorithms are assumed to perform without error, a system where noise perturbs both computational devices and communication channels is considered here. This paper studies limits in processing noisy signals with noisy circuits by investigating the effect of noise on standard iterative decoders for low-density parity-check codes. Concentration of decoding performance around its average is shown to hold when noise is introduced into message-passing and local computation. Density evolution equations for simple faulty iterative decoder…
This paper investigates decoding of binary linear block codes over the binary erasure channel (BEC). Of the current iterative decoding algorithms on this channel, we review the Recovery Algorithm and the Guess Algorithm. We then present a Multi-Guess Algorithm extended from the Guess Algorithm and a new algorithm -- the In-place Algorithm. The Multi-Guess Algorithm can push the limit to break the stopping sets. However, the performance of the Guess and the Multi-Guess Algorithm depend on the parity-check matrix of the code. Simulations show that we can decrease the frame error rate by several …
In this paper, a multi-antenna assisted virtual full-duplex (FD) relaying with reliability-aware iterative decoding at destination node is proposed to improve system spectral efficiency and reliability. This scheme enables two half-duplex relay nodes, mimicked as FD relaying, to alternatively serve as transmitter and receiver to relay their decoded data signals regardless the decoding errors, meanwhile, cancel the inter-relay interference with QR-decomposition. Then, by deploying the reliability-aware iterative detection/decoding process, destination node can efficiently mitigate inter-frame i…
In this paper, we provide necessary and sufficient conditions for a column-weight-three LDPC code to correct three errors when decoded using Gallager A algorithm. We then provide a construction technique which results in a code satisfying the above conditions. We also provide numerical assessment of code performance via simulation results.
In this paper, we develop a density evolution (DE) framework for analyzing the iterative joint decoding (JD) for non-orthogonal multiple access (NOMA) systems, where the ordered-statistics decoding (OSD) is applied to decode short block codes. We first investigate the density-transform feature of the soft-output OSD (SOSD), by deriving the density of the extrinsic log-likelihood ratio (LLR) with known densities of the priori LLR. Then, we represent the OSD-based JD by bipartite graphs (BGs), and develop the DE framework by characterizing the density-transform features of nodes over the BG. Num…
Spatial coupling is utilized to improve the performance of iterative channel estimation, multiuser detection, and decoding for multiple-input multiple-input (MIMO) bit-interleaved coded modulation (BICM). Coupling is applied to both coding and BICM---the encoder uses a protograph-based spatially-coupled low-density parity-check (SC LDPC) code. Spatially and temporally coupled (STC) BICM is proposed to enable iterative channel estimation via coupling. Linear minimum mean-squared error (LMMSE) estimation is applied for both channel estimation and detection to reduce the complexity. Tractable den…
The form of Dueck and Körner's exponent function for correct decoding probability for discrete memoryless channels at rates above the capacity is similar to the form of Csiszár and Körner's exponent function for correct decoding probability in lossy source coding for discrete memoryless sources at rates below the rate distortion function. We recently gave a new algorithm for computing Dueck and Körner's exponent. In this paper, we give an algorithm for computing Csiszár and Körner's exponent. The proposed algorithm can be also used to compute cutoff rate and the rate distortion function.
In this paper we investigate stopping criteria for iterative decoding from a mutual information perspective. We introduce new iteration stopping rules based on an approximation of the mutual information between encoded bits and decoder soft output. The first type stopping rule sets a threshold value directly on the approximated mutual information for terminating decoding. The threshold can be adjusted according to the expected bit error rate. The second one adopts a strategy similar to that of the well known cross-entropy stopping rule by applying a fixed threshold on the ratio of a simple met…
In this paper, we propose a new coded computing technique called "substitute decoding" for general iterative distributed computation tasks. In the first part of the paper, we use PageRank as a simple example to show that substitute decoding can make the computation of power iterations solving PageRank on sparse matrices robust to erasures in distributed systems. For these sparse matrices, codes with dense generator matrices can significantly increase storage costs and codes with low-density generator matrices (LDGM) are preferred. Surprisingly, we show through both theoretical analysis and sim…
GLDPC-PC Codes for MIMO Systems with Iterative Detection and Decoding
提出融合 GLDPC 与短类极化分量码的 GLDPC-PC，借助软输入软输出迭代置信传播解码降低延迟与错误平层，并在 MIMO IDD 系统中显著提升性能。
Using the EXIT chart approach, a necessary and sufficient condition is developed for the local stability of iterative decoding of multi-edge type (MET) doubly-generalized low-density parity-check (D-GLDPC) code ensembles. In such code ensembles, the use of arbitrary linear block codes as component codes is combined with the further design of local Tanner graph connectivity through the use of multiple edge types. The stability condition for these code ensembles is shown to be succinctly described in terms of the value of the spectral radius of an appropriately defined polynomial matrix.
Repetition-based retransmission is used in Alamouti-modulation [1998] for $2\times 2$ MIMO systems. We propose to use instead of ordinary repetition so-called "scaled repetition" together with rotation. It is shown that the rotated and scaled Alamouti code has a hard-decision performance which is only slightly worse than that of the Golden code [2005], the best known $2\times 2$ space-time code. Decoding the Golden code requires an exhaustive search over all codewords, while our rotated and scaled Alamouti code can be decoded with an acceptable complexity however.
Reed-Muller (RM) codes are known for their good maximum likelihood (ML) performance in the short block-length regime. Despite being one of the oldest classes of channel codes, finding a low complexity soft-input decoding scheme is still an open problem. In this work, we present a belief propagation (BP) decoding architecture for RM codes based on their rich automorphism group. The decoding algorithm can be seen as a generalization of multiple-bases belief propagation (MBBP) using polar BP as constituent decoders. We provide extensive error-rate performance simulations and compare our results t…
We analyze a class of high performance, low decoding-data-flow error-correcting codes suitable for high bit-rate optical-fiber communication systems. A spatially-coupled split-component ensemble is defined, generalizing from the most important codes of this class, staircase codes and braided block codes, and preserving a deterministic partitioning of component-code bits over code blocks. Our analysis focuses on low-complexity iterative algebraic decoding, which, for the binary erasure channel, is equivalent to a generalization of the peeling decoder. Using the differential equation method, we …
Iterative Gradient Descent Decoding for Real Number LDPC Codes
本文提出梯度下降符号更新（GDSU）译码器，用于实数LDPC码，在IEEE 802.11标准的1/2和2/3码率下优于GDBF译码器，3/4码率下性能相近。
Low-resolution precoding techniques have gained considerable attention in the wireless communications area recently. Vital but hardly discussed in literature, discrete precoding in conjunction with channel coding is the subject of this study. Unlike prior studies, we propose three different soft detection methods and an iterative detection and decoding scheme that allow the utilization of channel coding in conjunction with low-resolution precoding. Besides an exact approach for computing the extrinsic information, we propose two approximations with reduced computational complexity. Numerical r…
In this paper, we give necessary and sufficient conditions for low-density parity-check (LDPC) codes with column-weight three to correct three errors when decoded using hard-decision message-passing decoding. Additionally, we give necessary and sufficient conditions for column-weight-four codes to correct three errors in four iterations of hard-decision message-passing decoding. We then give a construction technique which results in codes satisfying these conditions. We also provide numerical assessment of code performance via simulation results.
A generic $(r,m)$-erasure correcting set is a collection of vectors in $\bF_2^r$ which can be used to generate, for each binary linear code of codimension $r$, a collection of parity check equations that enables iterative decoding of all correctable erasure patterns of size at most $m$. That is to say, the only stopping sets of size at most $m$ for the generated parity check equations are the erasure patterns for which there is more than one manner to fill in theerasures to obtain a codeword. We give an explicit construction of generic $(r,m)$-erasure correcting sets of cardinality $\sum_{i=0}…
This paper proposes an iterative detection and decoding (IDD) scheme for a cell free massive multiple input multiple output (CF-mMIMO) system. Users send coded data to the access points (APs), which is jointly detected at central processing unit (CPU). The symbols are exchanged iteratively in the form of log likelihood ratios (LLRs) between the detector and the low-density parity check codes (LPDC) decoder, increasing the coded system's performance. We propose a list-based multi-feedback diversity with successive interference cancellation (MF-SIC) to improve the performance of the CF-mMIMO. Fu…
Non-binary low-density parity-check (LDPC) codes have some advantages over their binary counterparts, but unfortunately their decoding complexity is a significant challenge. The iterative hard- and soft-reliability based majority-logic decoding algorithms are attractive for non-binary LDPC codes, since they involve only finite field additions and multiplications as well as integer operations and hence have significantly lower complexity than other algorithms. In this paper, we propose two improvements to the majority-logic decoding algorithms. Instead of the accumulation of reliability informa…
For finite coupling lengths, terminated spatially coupled low-density parity-check (SC-LDPC) codes show a non-negligible rate-loss. In this paper, we investigate if this rate loss can be mitigated by tail-biting SC-LDPC codes in conjunction with iterative demapping of higher order modulation formats. Therefore, we examine the BP threshold of different coupled and uncoupled ensembles. A comparison between the decoding thresholds approximated by EXIT charts and the density evolution results of the coupled and uncoupled ensemble is given. We investigate the effect and potential of different label…
Study of Iterative Detection, Decoding and Channel Estimation for RIS-Aided MIMO Networks
本研究针对多RIS辅助多天线系统，提出结合LDPC码与迭代处理、利用编码导频及奇偶校验比特的迭代检测译码与信道估计方案，在Sub-6 GHz非稀疏信道场景下验证了其性能优势。
In this paper we propose a new efficient message passing algorithm for decoding LDPC transmitted over a channel with strong phase noise. The algorithm performs approximate bayesian inference on a factor graph representation of the channel and code joint posterior. The approximate inference is based on an improved canonical model for the messages of the Sum & Product Algorithm, and a method for clustering the messages using the directional statistics framework. The proposed canonical model includes treatment for phase slips which can limit the performance of tracking algorithms. We show simulat…
Semi-definite relaxation (SDR) detector has been demonstrated to be successful in approaching maximum likelihood (ML) performance while the time complexity is only polynomial. We propose a new receiver jointly utilizing the forward error correction (FEC) code information in the SDR detection process. Strengthened by the code constraints, the joint SDR detector provides soft information of much improved reliability to downstream decoder and therefore outperforms existing receivers with substantial gain.
The asymptotic iterative decoding performances of low-density parity-check (LDPC) codes using min-sum (MS) and sum-product (SP) decoding algorithms on memoryless binary-input output-symmetric (MBIOS) channels are analyzed in this paper. For MS decoding, the analysis is done by upper bounding the bit error probability of the root bit of a tree code by the sequence error probability of a subcode of the tree code assuming the transmission of the all-zero codeword. The result is a recursive upper bound on the bit error probability after each iteration. For SP decoding, we derive a recursively dete…
Concatenation is a method of building long codes out of shorter ones, it attempts to meet the problem of decoding complexity by breaking the required computation into manageable segments. Concatenated Continuous Phase Frequency Shift Keying (CPFSK) facilitates powerful error correction. CPFSK also has the advantage of being bandwidth efficient and compatible with nonlinear amplifiers. Bandwidth efficient concatenated coded modulation schemes were designed for communication over Additive White Gaussian noise (AWGN), and Rayleigh fading channels. An analytical bounds on the performance of serial…
Iterative decoding of short BCH codes and its post-processing
本文针对短BCH码迭代译码，提出启发式优化奇偶校验矩阵、融合三种随机置换加速归一化最小和译码收敛，并结合神经网络辅助有序统计译码后处理，在性能、时延与复杂度间取得良好平衡。
We present a novel iterative detection and decoding scheme for the uplink of large-scale multiuser multiple-antenna systems. In order to reduce the receiver's energy consumption and computational complexity, 1-bit analog-to-digital converters are used in the front-end. The performance loss due to the 1-bit quantization can be mitigated by using large-scale antenna arrays. We propose a linear low-resolution-aware minimum mean square error detector for soft multiuser interference mitigation. Moreover, short block length low-density parity-check codes are considered for avoiding high latency. In …
We propose iterative detection and decoding (IDD) algorithms with Low-Density Parity-Check (LDPC) codes for Multiple Input Multiple Output (MIMO) systems operating in block-fading and fast Rayleigh fading channels. Soft-input soft-output minimum mean-square error receivers with successive interference cancellation are considered. In particular, we devise a novel strategy to improve the bit error rate (BER) performance of IDD schemes, which takes into account the soft \textit{a posteriori} output of the decoder in a block-fading channel when Root-Check LDPC codes are used. A MIMO IDD receiver w…
This paper considers the performance of $(j,k)$-regular low-density parity-check (LDPC) codes with message-passing (MP) decoding algorithms in the high-rate regime. In particular, we derive the high-rate scaling law for MP decoding of LDPC codes on the binary erasure channel (BEC) and the $q$-ary symmetric channel ($q$-SC). For the BEC, the density evolution (DE) threshold of iterative decoding scales like $Θ(k^{-1})$ and the critical stopping ratio scales like $Θ(k^{-j/(j-2)})$. For the $q$-SC, the DE threshold of verification decoding depends on the details of the decoder and scales like $Θ(…
Iterative Channel Estimation, Detection and Decoding for Multi-Antenna Systems with RIS
本文提出了一种利用RIS的多天线系统上行链路的ICEDD方案，通过码辅助估计和迭代信道跟踪提升信道估计精度与系统性能。
扫码添加微信好友，提出您的宝贵建议 👇
💡 备注请填写：网站反馈
发表机构由 AI 从论文文本抽取，如发现错误，欢迎反馈修正建议。