The interfacial charge transfer from the substrate may influence the electronic structure of the epitaxial van der Waals (vdW) monolayers and thus their further technological applications. For instance, the freestanding Sb monolayer in puckered honeycomb phase (α-antimonene), the structural analog of black phosphorene, was predicted to be a semiconductor, but the epitaxial one behaves as a gapless semimetal when grown on the Td-WTe2 substrate. Here, we demonstrate that interface engineering can be applied to tune the interfacial charge transfer and thus the electron band of epitaxial monolayer. As a result, the nearly freestanding (semiconducting) α-antimonene monolayer with a band gap of ~170 meV was successfully obtained on the SnSe substrate. Furthermore, a semiconductor-semimetal crossover is observed in the bilayer α-antimonene. This study paves the way towards modifying the electron structure in two-dimensional vdW materials through interface engineering.
Recently a stable monolayer of antimony in buckled honeycomb structure called antimonene was successfully grown on 3D topological insulator Bi$_2$Te$_3$ and Sb$_2$Te$_3$, which displays semiconducting properties. By first principle calculations, we systematically investigate the phononic, electronic and optical properties of $α-$ and $β-$ allotropes of monolayer arsenene/antimonene. We investigate the dynamical stabilities of these four materials by considering the phonon dispersions. The obtained electronic structures reveal the direct band gap of monolayer $α-$As/Sb and indirect band gap of …
The effects of spin-orbit (SOC) and electron-phonon coupling on the collective excitation of doped monolayer Sb$_2$ are investigated using density functional and many-body perturbation theories. The spin-orbit coupling is exclusively important for the monolayer Sb$_2$ and it leads to the reconstruction of the electronic band structure. In particular, plasmon modes of monolayer Sb$_2$ are quite sensitive to the SOC and are characterized by very low damping rates owing to small electron-phonon scatterings. Our results show plasmons in antimonene are significantly less damped compared to monolaye…
The electronic band topology of monolayer $β$-Sb (antimonene) is studied from the flat honeycomb to the equilibrium buckled structure using first-principles calculations and analyzed using a tight-binding model and low energy Hamiltonians. In flat monolayer Sb, the Fermi level occurs near the intersection of two warped Dirac cones, one associated with the $p_z$-orbitals, and one with the $\{p_x,p_y\}$-orbitals. The differently oriented threefold warping of these two cones leads to an unusually shaped nodal line, which leads to anisotropic in-plane transport properties and goniopolarity. A slig…
Van der Waals heterostructures have recently been identified as providing many opportunities to create new two-dimensional materials, and in particular to produce materials with topologically interesting states. Here we show that it is possible to create such heterostructures with multiple topological phases in a single nanoscale island. We discuss their growth within the framework of diffusion-limited aggregation, the formation of moiré patterns due to the differing crystallographies of the materials comprising the heterostructure, and the potential to engineer both the electronic structure a…
Atomically thin two-dimensional (2D) crystals have gained tremendous attentions owing to their potential impacts to the future electronics technologies, as well as the exotic phenomena emerging in these materials. Monolayer of α phase Sb (α-antimonene) that shares the same puckered structure as black phosphorous, has been predicted to be stable with precious properties. However, the experimental realization still remains challenging. Here, we successfully grow high-quality monolayer α-antimonene, with the thickness finely controlled. The α-antimonene exhibits great stability upon exposure to a…
Group-V elemental monolayers including phosphorene are emerging as promising 2D materials with semiconducting electronic properties. Here, we present the results of first principles calculations on stability, mechanical and electronic properties of 2D antimony (Sb), antimonene. Our calculations show that free-standing α and \b{eta} allotropes of antimonene are stable and semiconducting. The α-Sb has a puckered structure with two atomic sub-layers and \b{eta}-Sb has a buckled hexagonal lattice. The calculated Raman spectra and STM images have distinct features thus facilitating characterization…
Geometric optimization and electronic properties of Stone-Wales defective antimonene nanotubes are calculated by the method of first -principle calculations based on density functional theory. Various nanotubes are investigated according to the possible orientations of zigzag/armchair nanostructures when Stone-Wales defects are formed. The band structures, partial density of states and atomic orbitals are calculated to reveal the mechanism of influence of Stone-Wales defects on antimonene nanotubes. When the structure of antimonene changes from monolayer to tube, the indirect gap semiconductor…
In this work, we investigate the mechanical and electronic properties of monolayer antimonene in its most stable beta-phase using first-principles calculations. The upper region of its valence band is found to solely consist of lone pair p-orbital states, which are by nature more delocalized than the d-orbital states in transition metal dichalcogenides, implying superior transport performance of antimonene. The Young's and shear moduli of beta-antimonene are observed to be ~25% higher than those of bulk antimony, while the hexagonal lattice constant of the monolayer reduces significantly (~5%)…
Antimonene has attracted much attention for its high carrier mobility and suitable band gap for electronic, optoelectronic, and even spintronic devices. To tailor its properties for such applications, strain engineering may be adopted. However, such 2D crystals may prefer to exist in the rippled form due to the instability of long-range orders, and rippling has been shown to have a contrasting, significant impact on the electronic properties of various 2D materials, which complicates the tuning process. Hence, the effects of rippling on the electronic properties of antimonene under strain are …
Regulation of electronic structure and mobility cut-on rate in two-dimensional transition metal dichalcogenides (TMDs) has attracted much attention because of its potential in electronic device design. The anisotropic Raman scattering and mobility cut-on rate of monolayer unique distorted-1T(1Td) ReS2 with external strain are determined theoretically based on the density function theory. The angle-dependent Raman spectrum of Ag-like, Eg-like and Cp models are used to discriminate and analysis structural anisotropy; the strain is exploited to adjust the structural symmetry and electronic struct…
By using first-principles calculations, we investigated the monolayer $ReS_2$ with vacancies under strain engineering, specifically focusing on its energy of formation, band gap, electron density of states, effective mass and optical properties. The calculated results disclose that S4 defect is more likely to form than other kinds of vacancies. Asymmetric deformation induced by strain makes its band structure transformation from direct band gap to indirect band gap. The analysis of the partial density of states indicates that the Re-d, Re-p and S-d orbitals are the major components of the defe…
Creation of high quality p-n junctions in graphene monolayer is vital in studying many exotic phenomena of massless Dirac fermions. However, even with the fast progress of graphene technology for more than ten years, it remains conspicuously difficult to generate nanoscale and atomically-sharp p-n junctions in graphene. Here, we employ monolayer-vacancy-island engineering of Cu surface to realize nanoscale p-n junctions with atomically-sharp boundaries in graphene monolayer. The variation of graphene-Cu separations around the edges of the Cu monolayer-vacancy-island affects the positions of th…
Molybdenum disulfide is considered as one of the most promising two-dimensional semiconductors for electronic and optoelectronic device applications. So far, the charge transport in monolayer molybdenum disulfide is dominated by extrinsic factors such as charged impurities, structural defects and traps, leading to much lower mobility than the intrinsic limit. Here, we develop a facile low-temperature thiol chemistry to repair the sulfur vacancies and improve the interface, resulting in significant reduction of the charged impurities and traps. High mobility greater than 80cm2 V-1 s-1 is achiev…
Two-dimensional ferroelectrics (FEs) are promising in the miniaturization of memory devices with ultra-high-density data storage and low power consumption. However, many thiophosphate monolayers, i.e., analogs of CuInP$_2$S$_6$ and referred to as ABP$_2$X$_6$, lose ferroelectricity and instead exhibit an antiferroelectric (AFE) or paraelectric ordering. We propose to tune the AFE ABP$_2$X$_6$ monolayers into the FE ordering through interface engineering. The mechanism is that there are couplings between the charge polarizations of the ABP$_2$X$_6$ monolayers and the local dipoles as well as th…
In this paper, spin properties of monolayer MX (M=Ga, In and X=S, Se, Te) in the presence of strain are studied. Density functional theory is used to investigate spin properties. The strain changes modification of bandgap due to spin-orbit coupling, the results indicate the spin-orbit coupling has a higher effect in the compressive regime. Also, spin splitting in the conduction and valence bands respect to strain are compared for six materials. The location of conduction band minimum (CBM) imposed a type of spin properties. These materials with mirror symmetry can display the Rashba effect whi…
Two-dimensional (2D) magnetic materials are essential for the development of the next-generation spintronic technologies. Recently, layered van der Waals (vdW) compound MnBi2Te4 (MBT) has attracted great interest, and its 2D structure has been reported to host coexisting magnetism and topology. Here, we design several conceptual nanodevices based on MBT monolayer (MBT-ML) and reveal their spin-dependent transport properties by means of the first-principles calculations. The pn-junction diodes and sub-3-nm pin-junction field-effect transistors (FETs) show a strong rectifying effect and a spin f…
Novel materials with tunable magnetic states play a significant role in the development of next-generation spintronic devices. In this paper, we examine the role of biaxial strain on the electronic properties of vacancy-decorated hexagonal boron nitride (h-BN) monolayers using density functional theory calculations. We found that the strain can lead to switching of the magnetic state for h-BN monolayers with boron vacancy or divacancy. Our findings promise a new route for the operation of low-dimensional spintronic devices.
Intrinsic electrical and excitonic properties of monolayer transition metal dichalcogenides are studied on CYTOP fluoropolymer substrates with greatly suppressed unintentional doping and dielectric screening. Ambipolar transport behavior is observed in monolayer WS2 by applying solid states backdates. The excitonic properties of monolayer MoS2 and WS2 are determined by intricate interplays between the bandage renormalization, Pauli blocking and carrier screening against carrier doping.
In search for a new generation of spintronics hardware, material candidates for room temperature quantum spin Hall effect (QSHE) have become a contemporary focus of investigation. Inspired by the original proposal for QSHE in graphene, several heterostructures have been synthesized, aiming at a hexagonal monolayer of heavier group IV elements in order to promote the QSHE bulk gap via increased spin-orbit coupling. So far, however, the monolayer/substrate coupling, which can manifest itself in strain, deformation, and hybridization, has proven to be detrimental to the aspired QSHE conditions fo…
Photoluminescence (PL) of transition metal dichalcogenide (TMD) monolayers is strongly influenced by the dielectric environment. The defect states present in the substrate induces uncontrollable doping in the TMD monolayer and thereby modifies the PL spectra. There have been enormous efforts to tune and overcome the effect of inevitable subtract defects in PL spectra, but a proper understanding and a convenient way are still lacking. Here, we systematically studied the effect of surface defects by gradually increasing the separation between WS2 monolayer and substrate. Hence, we could precisel…
Using the first-principles calculations based on density functional theory, we systematically investigate the strain-engineering (tensile and compressive strain) electronic, mechanical and transport properties of monolayer penta-SiC$_2$. By applying an in-plane tensile or compressive strain, it is easy to modulate the electronic band structure of monolayer penta-SiC$_2$, which subsequently changes the effective mass of carriers. Furthermore, the obtained electronic properties are predicted to change from indirectly semiconducting to metallic. More interestingly, at room temperature, uniaxial s…
The phonon band structure of monolayer MoS2 is characteristic for a large energy gap between acoustic and optical branches, which protects the vibration of acoustic modes from being scattered by optical phonon modes. Therefore, the phonon bandgap engineering is of practical significance for the manipulation of phonon-related mechanical or thermal properties in monolayer MoS2. We perform both phonon analysis and molecular dynamics simulations to investigate the tension effect on the phonon bandgap and the compression induced instability of the monolayer MoS2. Our key finding is that the phonon …
This paper investigates strain effects on the electronic and optical properties of monolayer GaSe using first-principles calculations. The deformation significantly alters energy dispersion, band gap, and the band edge states of GaSe. The band gap evolution exhibits both linearly and nonlinearly with the strains, and strongly depending on the types of deformation and the direction of the modifications. The external mechanical strains also significantly tailor the optical properties of GaSe, the exciton binding energy is strongly reduced when the tensile strain is applied, while the opposite wa…
In this work, we present a computational study on the possibility of strain engineering in monolayer Black Phosphorus (black P) and Blue Phosphorus (blue P) based MOSFETs. The material properties like band structure, carrier effective masses, carrier densities at band extrema are evaluated using Generalized Gradient Approximation (GGA) in Density Functional Theory (DFT).Thereafter self-consistent Non-Equilibrium Greens Function (NEGF) simulations are carried out to study the device performance metrics (such as output characteristics, ON currents, transconductance etc.) of such strained black P…
Two-dimensional (2D) allotrope of tin with low buckled honeycomb structure, named as stanene, is proposed to be an ideal 2D topological insulator with a nontrivial gap larger than 0.1 eV. Theoretical works also pointed out the topological property of stanene occurs by strain tuning. In this letter, we report the successful realization of high quality, monolayer stanene film as well as monolayer stanene nanoribbons on Sb(111) surface by molecular beam epitaxy, providing an ideal platform to the study of stanene. More importantly, we observed a continuous evolution of the electronic bands of sta…
Transition metal dichalcogenides (TMDs) are known to support complex excitonic states. Revealing the differences in relaxation dynamics among different excitonic species and elucidating the transition dynamics between them may provide important guidelines for designing TMD-based excitonic devices. Combining photoluminescence (PL) and reflectance contrast measurements with ultrafast pump-probe spectroscopy under cryogenic temperatures, we herein study the relaxation dynamics of neutral and charged excitons in a back-gate-controlled monolayer device. Pump-probe results reveal quite different rel…
Electron-hole liquids(EHLs), a correlated state of matter and a thermodynamic liquid, have recently been found to exist at room temperature in suspended monolayers of MoS2. Appreciably higher rates of radiative recombination inside the liquid as compared to free excitons hold promise for optoelectronic applications such as broadband lasing. In this paper, we show that leveraging the valley physics in MoS2 may be a route towards achieving tunability of specific characteristics of an EHL, such as emission wavelength, linewidth, and most importantly, the liquid density. The conditions under which…
Two-dimensional transition metal dichalcogenides have attracted great attention recently. Motivated by a recent study of crystalline bulk VTe$_2$, we theoretically investigated the spin-charge-lattice interplay in monolayer VTe$_2$. To understand the controversial experimental reports on several different charge density wave ground states, we paid special attention to the 'hidden' role of antiferromagnetism as its direct experimental detection may be challenging. Our first-principles calculations show that the 4$\times$1 charge density wave and the corresponding lattice deformation are accompa…
Transition metal dichalcogenide (TMDC) monolayers are newly discovered semiconductors for a wide range of applications in electronics and optoelectronics. Most studies have focused on binary monolayers that share common properties: direct optical bandgap, spin-orbit (SO) splittings of hundreds of meV, light-matter interaction dominated by robust excitons and coupled spin-valley states of electrons. Studies on alloy-based monolayers are more recent, yet they may not only extend the possibilities for TMDC applications through specific engineering but also help understanding the differences betwe…
We prepare monolayers of tantalum sulfide on Au(111) by evaporation of Ta in a reactive background of H$_2$S. Under sulfur-rich conditions, monolayers of 2H-TaS$_2$ develop, whereas under sulfur-poor conditions TaS forms, a structure that can be derived from 2H-TaS$_2$ by removal of the bottom S layer. We analyse the alignment of the layers with respect to the substrate and the relation with the domains in the Au(111) herringbone reconstruction using scanning tunneling microscopy (STM). With the help of density functional theory (DFT) calculations we can determine the registry of the two phase…
Two-dimensional (2D) materials are known to possess emergent properties that are not found in their bulk counterparts. Recent experiments have shown a $\sqrt7 \times \sqrt3$ charge density wave (CDW) in monolayer 1T-VSe$_2$, in contrast to the $4\times 4\times 3$ phase in bulk. Here, via first-principles calculations, we show that multiple CDW phases compete in monolayer VSe$_2$, the ground state of which can be tuned by charge doping and in-plane biaxial strain. With doping, the $\sqrt7 \times \sqrt3$ CDW of the pristine VSe$_2$ transfers to a $3 \times \sqrt3$ and $4\times 4$ phase, the latt…
Interactions of quantum materials with strong-laser fields can induce exotic nonequilibrium electronic states. Monolayer transition-metal dichalcogenides, a new class of direct-gap semiconductors with prominent quantum confinement, offer exceptional opportunities toward Floquet engineering of quasiparticle electron-hole states, or excitons. Strong-field driving has a potential to achieve enhanced control of electronic band structure, thus a possibility to open a new realm of exciton light-matter interactions. However, experimental implementation of strongly-driven excitons has so far remained …
Two-dimensional (2D) ferromagnetic materials have been exhibiting promising potential in applications, such as spintronics devices. To grow epitaxial magnetic films on silicon substrate, in the single-layer limit, is practically important but challenging. In this study, we realized the epitaxial growth of MnSn monolayer on Si(111) substrate, with an atomically thin Sn/Si(111)-$2\sqrt{3}\times2\sqrt{3}$- buffer layer, and controlled the MnSn thickness with atomic-layer precision. We discovered the ferromagnetism in MnSn monolayer with the Curie temperature (Tc) of ~54 K. As the MnSn film is gro…
Strain engineering is an important method for tuning the properties of semiconductors and has been used to improve the mobility of silicon transistors for several decades. Recently, theoretical studies have predicted that strain can also improve the mobility of two-dimensional (2D) semiconductors, e.g. by reducing intervalley scattering or lowering effective masses. Here, we experimentally show strain-enhanced electron mobility in monolayer MoS2 transistors with uniaxial tensile strain, on flexible substrates. The on-state current and mobility are nearly doubled with tensile strain up to 0.7%,…
Ab-initio density functional theory calculations are performed to study the electronic properties of a MoS2 monolayer deposited over a SiO2 substrate in the presence of interface impurities and defects. When MoS2 is placed on a defect-free substrate the oxide plays an insignificant role, since the conduction band top and the valence band minimum of MoS2 are located approximately in the middle of the SiO2 band-gap. However, if Na impurities and O dangling bonds are introduced at the SiO2 surface, these lead to localized states, which modulate the conductivity of the MoS2 monolayer from n- to p-…
The objective of this work is to study the effects of charge redistribution, applied layer-normal electric fields, applied strain, and layer engineering on the band alignment of Black Phosphorus (BP)/Molybdenum disulphide (MoS2) heterostructure through Density Functional Theory (DFT) simulations. Black phosphorus works as a p-type material with high mobility, mechanical flexibility, and sensitivity to number of layers. Combining it with the more electronegative material, MoS2 results in strong carrier confinement and a Type II heterostructure. Charge redistribution among the layers shifts the …
Transition metal dichalcogenide monolayers such as MoSe2,MoS2 and WSe2 are direct bandgap semiconductors with original optoelectronic and spin-valley properties. Here we report spectrally sharp, spatially localized emission in monolayer MoSe2. We find this quantum dot like emission in samples exfoliated onto gold substrates and also suspended flakes. Spatial mapping shows a correlation between the location of emitters and the existence of wrinkles (strained regions) in the flake. We tune the emission properties in magnetic and electric fields applied perpendicular to the monolayer plane. We ex…
We demonstrate a method to induce tensile and compressive strain into two-dimensional transition metal dichalcogenide (TMDC) MoS$_{2}$ via the deposition of stressed thin films to encapsulate exfoliated flakes. With this technique we can directly engineer MoS$_{2}$ strain magnitude by changing deposited thin film stress, therefore allowing variable strain to be applied on a flake-to-flake level. These thin film stressors are analogous to SiN$_{x}$ based stressors implemented in industrial CMOS processes to enhance Si mobility, suggesting that our concept is highly scalable and may be applied f…
Newly fabricated monolayer phosphorene and its few-layer structures are expected to be promising for electronic and optical applications because of their finite direct band gaps and sizable but anisotropic electronic mobility. By first-principles simulations, we show that this unique anisotropic conductance can be controlled by using simple strain conditions. With the appropriate biaxial or uniaxial strain, we can rotate the preferred conducting direction by 90 degrees. This will be of useful for exploring quantum Hall effects, and exotic electronic and mechanical applications based on phospho…
Nanomaterials are prone to influence by chemical adsorption because of their large surface to volume ratios. This enables sensitive detection of adsorbed chemical species which, in turn, can tune the property of the host material. Recent studies discovered that single and multilayer molybdenum disulfide (MoS_2) films are ultra sensitive to several important environmental molecules. Here we report new findings from ab initio calculations that reveal substantially enhanced adsorption of NO and NH3 on strained monolyaer MoS2 with significant impact on the properties of the adsorbates and MoS2 lay…
Phase change memory (PCM) is an emerging data storage technology, however its programming is thermal in nature and typically not energy-efficient. Here we reduce the switching power of PCM through the combined approaches of filamentary contacts and thermal confinement. The filamentary contact is formed through an oxidized TiN layer on the bottom electrode, and thermal confinement is achieved using a monolayer semiconductor interface, three-atom thick MoS2. The former reduces the switching volume of the phase change material and yields a 70% reduction in reset current versus typical 150 nm diam…
Low-dimensional transition metal dichalcogenides (TMDC) exhibit great photocatalytic performance and tunability. In this work, using first-principles simulations based on density functional theory (DFT), we demonstrate that external electric bias can be employed to further improve the photocatalytic hydrogen production efficiency of the six AB$_{2}$ (A=Mo, W and B=S, Se, Te) TMDC monolayers by exploiting their piezoelectric response. In particular, when subjected to a proper amount of electrically induced tensile biaxial strain, most TMDC monolayers turn into potentially ideal photocatalyst to…
Alloy engineering of excitonic properties in TMD monolayers
Foundation for Research and Technology-Hellas（希腊研究与技术基金会）；Univ Toulouse, INSA, CNRS, LPCNO（图卢兹大学、国立应用科学学院、法国国家科学研究中心、低压与纳米电子物理实验室）；Department of Materials Science and Engineering, University of Crete（克里特大学材料科学与工程系）；Research Center for Materials Nanoarchitectonics, National Institute for Materials Science（日本国立材料研究所材料纳米架构研究中心）；Research Center for Electronic and Optical Materials, National Institute for Materials Science（日本国立材料研究所电子与光学材料研究中心）；Department of Inorganic Chemistry, University of Chemistry and Technology Prague（布拉格化工大学无机化学系）；Key Laboratory of Advanced Optoelectronic Quantum Architecture and Measurement, Ministry of Education, School of Physics and Beijing Key Laboratory of Nanophotonics and Ultrafine Optoelectronic Systems, Beijing Institute of Technology（北京理工大学物理学院教育部先进光电子量子结构与测量重点实验室及北京市纳米光子学与超精细光电系统重点实验室）；Institut Universitaire de France（法兰西学院）
