Natural abundance, impressive chemical characteristics and economic feasibility have rekindled the appeal for rechargeable sodium (Na) batteries as a practical solution for the growing energy demand, environmental sustainability and energy independence. However, the scarcity of viable positive electrode materials remains a huge impediment to the actualization of this technology. In this paper, we explore honeycomb layered oxides adopting the composition Na$_2$Ni$_{2-x}$Co$_x$TeO$_6$ ($x = 0, 0.25$ and $0.50$) as feasible positive electrode (cathode) materials for rechargeable sodium batteries at both room- and elevated temperatures using ionic liquids. Through standard galvanostatic assessments and analyses we demonstrate that substitution of nickel with cobalt in Na$_2$Ni$_2$TeO$_6$ leads to an increase in the discharge voltage to nearly $4$ V (versus Na$^+$ / Na) for the Na$_2$Ni$_{2-x}$Co$_x$TeO$_6$ family of honeycomb layered oxide materials, which surpasses the attained average voltages for most layered oxide positive electrode materials that facilitate Na-ion desertion. We also verify the increased kinetics within the Na$_2$Ni$_{2-x}$Co$_x$TeO$_6$ honeycomb layered oxides during operations at elevated temperatures which lead to an increase in reversible capacity of the rechargeable Na battery. This study underpins the doping of congener transition metal atoms to the honeycomb structure of Na$_2$Ni$_2$TeO$_6$ in addition to elevated-temperature operation as a judicious route to enhance the electrochemical performance of analogous layered oxides.
This study introduces the principles of a new class of batteries, rechargeable molten air batteries, and several battery chemistry examples are demonstrated. The new battery class uses a molten electrolyte, are quasi reversible, and have amongst the highest intrinsic battery electric energy storage capacities. Three examples of the new batteries are demonstrated. These are the iron, carbon and VB2 molten air batteries with respective intrinsic volumetric energy capacities of 10,000, 19,000 and 27,000 Wh per liter.
Searching for efficient and high-performance cathode materials for rechargeable magnesium ion batteries (RMBs) is urgent for exploring sustainable energy technologies. However, the majority of cathode materials for RMBs usually suffer from low rate capacity and inferior cycle performance caused by structure collapse. Herein, ternary CuCo$_2$S$_4$/Cu$_7$S$_4$ composites with nano-sized are first synthesized by a facile solvothermal method in this work and the magnesium ion storage behavior is discussed when applied in the cathode for RMBs. Electrochemical results demonstrate that the nanosphere…
Crystal structures play a vital role in determining materials properties. In Li-ion cathodes, the crystal structure defines the dimensionality and connectivity of interstitial sites, thus determining Li-ion diffusion kinetics. While a perfect crystal has infinite structural coherence, a class of recently discovered high-capacity cathodes, Li-excess cation-disordered rocksalts, falls on the other end of the spectrum: Their cation sublattices are assumed to be randomly populated by Li and transition metal ions with zero configurational coherence based on conventional X-ray diffraction, such that…
We present theoretical analysis on why and how rechargeable metal-air type batteries can be made significantly safer and more practical by utilizing CO2/oxalate conversions instead of O2/peroxide or O2/hydroxide ones, in the positive electrode. Metal-air batteries, such as the Li-air one, may have very large energy densities, comparable to that of gasoline, theoretically allowing for long range all-electric vehicles. There are, however, still significant challenges, especially related to the safety of their underlying chemistries, the robustness of their recharging and the need of supplying hi…
The mechanisms and efficiency of charge transport in lithium peroxide (Li2O2) are key factors in understanding the performance of non-aqueous Li-air batteries. Towards revealing these mechanisms, here we use first-principles calculations to predict the concentrations and mobilities of charge carriers and intrinsic defects in Li2O2 as a function of cell voltage. Our calculations reveal that changes in the charge state of O2 dimers controls the defect chemistry and conductivity of Li2O2. Negative lithium vacancies (missing Li+) and small hole polarons are identified as the dominant charge carrie…
Cycle life is critically important in applications of rechargeable batteries, but lifetime prediction is mostly based on empirical trends, rather than mathematical models. In practical lithium-ion batteries, capacity fade occurs over thousands of cycles, limited by slow electrochemical processes, such as the formation of a solid-electrolyte interphase (SEI) in the negative electrode, which compete with reversible lithium intercalation. Focusing on SEI growth as the canonical degradation mechanism, we show that a simple single-particle model can accurately explain experimentally observed capaci…
Theoretical Studies on Sodium Storage Mechanism in Hard Carbon Anodes of Sodium-Ion Batteries: Molecular Simulations Based on Machine Learning Force Fields
Endowed with a multitude of exquisite properties such as rich electrochemistry, superb topology and eccentric electromagnetic phenomena, honeycomb layered oxides have risen to the top echelons of science with applications in diverse fields ranging from condensed matter physics, solid-state chemistry, materials science, solid-state ionics to electrochemistry. However, these oxides are vastly underutilised as their underlying atomistic mechanisms remain unexplored. Therefore, in this study, atomic-resolution imaging on pristine $\rm K_2Ni_2TeO_6$ along multiple zone axes was conducted using sphe…
We report the electrochemical performance of nanostructures of Na$_{0.66}$V$_4$O$_{10}$ as cathode material for rechargeable batteries. The Rietveld refinement of room temperature x-ray diffraction pattern shows the monoclinic phase with C2/m space group. The cyclic voltammetry curves of prepared half-cells exhibit redox peaks at ~3.1 and 2.6~V, which are due to two-phase transition reaction between V$^{5+/4+}$ and can be assigned to the single step deintercalation/intercalation of Na-ion. We observe a good cycling stability with specific discharge capacity (measured vs. Na$^+$/Na) between 80 …
Study of In-plane and Interlayer Interactions During Aluminum Fluoride Intercalation in Graphite: Implications for the Development of Rechargeable Batteries
Finding proper electrocatalysts capable of efficient catalyzing both ORR and OER is of great importance for metal-air batteries. With increasing inclination towards structural and flexible devices, developing a high-performance self-standing air-cathode is highly demanded and challenging, as most of oxygen catalysts are powder and need to be further processed. Here, we construct highly bifunctional air catalyst from macroscopic CNT fibers (CNTf) through direct CVD spinning followed by hydrothermal method. The electrocatalytic properties of the samples were tuned by altering nitrogen-doping and…
Controlling nanostructure from molecular, crystal lattice to the electrode level remains as arts in practice, where nucleation and growth of the crystals still require more fundamental understanding and precise control to shape the microstructure of metal deposits and their properties. This is vital to achieve dendrite-free Li metal anodes with high electrochemical reversibility for practical high-energy rechargeable Li batteries. Here, cryogenic-transmission electron microscopy was used to capture the dynamic growth and atomic structure of Li metal deposits at the early nucleation stage, in w…
We report the synthesis of a graphene-sulfur composite material by wrapping polyethyleneglycol (PEG) coated submicron sulfur particles with mildly oxidized graphene oxide sheets decorated by carbon black nanoparticles. The PEG and graphene coating layers are important to accommodating volume expansion of the coated sulfur particles during discharge, trapping soluble polysulfide intermediates and rendering the sulfur particles electrically conducting. The resulting graphene-sulfur composite showed high and stable specific capacities up to ~600mAh/g over more than 100 cycles, representing a prom…
Discovery of atomically thin black phosphorus (called phosphorene) holds promise to be used as an alternative two-dimensional material to graphene and transition metal dichalcogenides especially as an anode material for lithium-ion batteries (LIBs). However, at present bulk black phosphorus (BP) still suffers from rapid capacity fading that results in poor rechargeable performance. Here, for the first time, we use in situ transmission electron microscopy (TEM) to construct nanoscale phosphorene LIBs and visualize the capacity fading mechanism in thick multilayer phosphorene by real time captur…
The abundance of Sodium (Na), its low-cost, and low reduction potential provide a lucrative inexpensive, safe, and environmentally benign alternative to Lithium Ion Batteries (LIBs). The significant challenges in advancing Sodium Ion Battery (NIB) technologies lies in finding the better electrode materials. Experimental investigations revealed the real potency of Germanium (Ge) as suitable anode materials for NIBs. However, a systematic atomistic study is necessary to understand the fundamental aspects of capacity-voltage correlation, microstructural changes of Ge, as well as diffusion kinetic…
Phosphorus is one of the most promising anodes for sodium ion batteries (SIBs). Little is known about the structural mechanism of Na/P cycling due to the fact that only one of the structures involved (Na3P) is crystalline. Using operando X-ray diffraction computed tomography (XRD-CT) analysed by Rietveld and pair distribution (PDF) methods combined with density functional theory (DFT) calculations we show that the sodiation and desodiation mechanisms of phosphorus are very different. Sodiation follows the thermodynamic path of lowest energy from P via NaP to Na3P while desodiation follows a ki…
Sodium-ion batteries (SIBs) have attracted a great deal of attention as potential low-cost energy storage alternatives to Lithium-ion batteries (LIBs) due to the intrinsic safety and great abundance of sodium on Earth. For developing competitive SIBs, highly efficient anode materials with large capacity and rapid ion diffusion are indispensable. In this study, a two-dimensional (2D) Dirac monolayer, that is borophosphene, is proposed to be a promising anode material for high performance SIBs on the basis of density functional theory calculations. The performances of Na adsorption and diffusion…
Potassium-ion ($\rm K$-ion) rechargeable batteries; considered to be lucrative low-cost battery options for large-scale and capacious energy storage systems, have been garnering tremendous attention in recent years. However, due to the scarcity of cathode materials that can condone the reversible re-insertion of the large $\rm K$-ions at feasible capacities, the viability of $\rm K$-ion batteries has been greatly undercut. In this paper, we explore a potential cathode material in the $\rm K_2O$-$\rm Fe_2O_3$-$\rm MnO_2$ ternary phase system, that not only demonstrates reversible $\rm K$-ion re…
Sodium ion batteries become popular due to their low cost. Among possible anode materials of sodium ion batteries, phosphorus has great potential owing to its high theoretical capacity. Previous research that yielded high capacity and long duration of phosphorus anode used expensive materials such as black phosphorus (BP) and phosphorene. To take advantage of the low cost of sodium ion batteries, we report a simple and low-cost method to fabricate anode: condensing red phosphorus on carbon xerogel. Even with large particle size (~ 50 $μ$m) and high mass loading (2 mg cm$^{-2}$), the composite …
Phosphorus has received recent attention in the context of high-capacity and high-rate anodes for lithium and sodium-ion batteries. Here, we present a first principles structure prediction study combined with NMR calculations which gives us insights into its lithiation/sodiation process. We report a variety of new phases phases found by AIRSS and the atomic species swapping methods. Of particular interest, a stable Na$_5$P$_4$-C2/m structure and locally stable structures found less than 10 meV/f.u. from the convex hull, such as Li$_4$P$_3$-P2$_1$2$_1$2$_1$, NaP$_5$-Pnma and Na$_4$P$_3$-Cmcm. T…
Renewable energy sources such as solar and wind are critical to combatting global warming. Nevertheless, their intermittent energy generation requires the development of large-scale grid energy storage, in contrast to the on-demand generation of coal-based power plants. Sodium-ion batteries offer a promising potential technology, yet because sodium ions are larger than lithium ions, sodium-ion intercalation results in more drastic structural rearrangements. An improved understanding of structural dynamics and ionic diffusion pathways is crucial to developing more durable sodium-ion batteries. …
The performance of lithium and sodium ion batteries relies notably on the accessibility to carbon electrodes of controllable porous structure and chemical composition. This work reports a facile synthesis of well-defined porous N-doped carbons (NPCs) using a poly(ionic liquid) (PIL) as precursor, and graphene oxide (GO)-stabilized poly(methyl methacrylate) (PMMA) nanoparticles as sacrificial template. The GO-stabilized PMMA nanoparticles were first prepared and then decorated by a thin PIL coating before carbonization. The resulting NPCs reached a satisfactory specific surface area of up to 56…
Cathode materials undergo various phase transitions during the charge/discharge process, and the structural transitions significantly affect the battery performance. Although phonon properties can provide a direct clue for structural stability and transitions, it has been less explored in sodium cathode materials. Here, using the first-principles calculations, we investigate phonon and electronic properties of various layered NaMnO$_2$ materials, especially focusing on the dependency of the Jahn-Teller distortion of Mn$^{3+}$. The phonon dispersion curves show that the O$'$3 and P$'$2 structur…
We present a comparative ab initio study of Li and Na insertion in molecular (van der Waals) crystals of TCNE (tetracyanoethylene) as well as in covalent Li/Na-TCNE crystals. We confirm the structure of previously synthesized (covalent) Li-TCNE crystal as well as predict the existence of its Na-TCNE analogue. In the molecular/covalent TCNE crystals, insertion sites are identified with the binding energy of Li and Na up to 2.7/1.8 and 2.6/1.8 eV stronger than Li and Na cohesive energy, respectively, in dilute concentrations. Up to 5.5/2.5 and 3/2 Li and Na atoms per TCNE unit can be inserted in…
We investigate the Li2CuSb full-Heusler alloy using the first-principles electronic structure calculations and propose the electrochemical lithiation in this alloy. Band structure calculations suggest the presence of metallic nature in this alloy contrary to half-metallic nature as predicted for most of the members of the full-Heusler alloy family. This alloy is found to be a promising anode material for high-capacity rechargeable batteries based on lithium-ion. We found a removal voltage of 2.48 V for lithium ions in the Li2CuSb/Cu cell, which is in good agreement with the experimentally obta…
There is an urgently need for the high-performance rechargeable electrical storage devices as supplement or substitutions of lithium ion batteries due to the shortage of lithium in nature. Herein we propose a stable 2D electrene T'-Ca2P as anode material for Na/K ion batteries by first-principle calculations. Our calculated results show that T'-Ca2P monolayer is an antiferromagnetic semiconducting electrene with spin-polarized electron gas. It exhibits suitable adsorption for both Na and K atoms, and its anisotropic migration energy barriers are 0.050/0.101 eV and 0.037/0.091 eV in b/a directi…
Bismuth has recently attracted interest in connection with Na-ion battery anodes due to its high volumetric capacity. It reacts with Na to form Na$_3$Bi which is a prototypical Dirac semimetal with a nontrivial electronic structure. Density-functional-theory based first-principles calculations are playing a key role in understanding the fascinating electronic structure of Na$_3$Bi and other topological materials. In particular, the strongly-constrained-and-appropriately-normed (SCAN) meta-generalized-gradient-approximation (meta-GGA) has shown significant improvement over the widely used gener…
In search of the potential cathode materials for sodium-ion batteries and to understand the diffusion kinetics, we report the detailed analysis of electrochemical investigation of honeycomb structured Na$_{2}$Ni$_{2}$TeO$_{6}$ material using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), galvanostatic charge-discharge (GCD) and galvanostatic intermittent titration technique (GITT). We found the discharge capacities of 82 and 77 mAhg$^{-1}$ at 0.05~C and 0.1~C current rates, respectively, and the mid-working potential of $\approx$3.9~V at 1~C and high capacity retention …
Graphyne, a single atomic layer structure of the carbon six-member rings connected by one acetilenic linkage, is a promising anode of rechargeable batteries. In this paper, a first-principle study has been carried out on graphyne as a new candidate for the anode material of magnesium-ion batteries, using density functional theory calculations. The main focus is on the magnesium adsorption on graphyne surface. The structural properties such as adsorption height and energy, the most stable adsorption sites, the Band structure and DOS of the pristine graphyne the diverse Mg-decorated graphyne str…
Sodium ion batteries (SIBs) are considered as an efficient alternative for lithium-ion batteries (LIBs) owing to the natural abundance and low cost of sodium than lithium. In this context, the anode materials play a vital role in rechargeable batteries to acquire high energy and power density. In order to demonstrate transition metal dichalcogenide (TMD) as potential anode materials, we have synthesized MoSeTe sample by conventional flux method, and the structure and morphology are characterized using x-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission el…
We present a comparative ab initio computational study of sodium and lithium storage in amorphous (glassy) carbon (a-C) vs. graphite. Amorphous structures are obtained by fitting stochastically generated structures to a reference radial distribution function. Li insertion is thermodynamically favored in both graphite and a-C. While sodium insertion is thermodynamically unfavored in graphite, a-C possesses multiple insertion sites with binding energies stronger than Na cohesive energy, making it usable as anode material for Na-ion batteries.
Rechargeable Zn batteries with aqueous electrolytes have been considered as promising alternative energy storage technology, with various advantages such as low cost, high volumetric capacity, environmentally friendly, and high safety. However, a lack of reliable cathode materials has largely pledged their applications. Herein, we developed a machine learning (ML) based approach to predict cathodes with high capacity (>150 mAh/g) and high voltage (>0.5V). We screened over ~130,000 inorganic materials from the Materials Project database and applied the crystal graph convolutional neural network…
Due to its unique physical and chemical properties, graphene is being considered as a promising material for energy conversion and storage applications. Introduction of functional groups and dopants on/in graphene is a useful strategy for tuning its properties. In order to fully exploit its potential, atomic-level understanding of its interaction with species of importance for such applications is required. We present a DFT study of the interaction of sodium atoms with epoxy-graphene and analyze how this interaction is affected upon doping with boron and nitrogen. We demonstrate how the dopant…
The identification of alternatives to the Lithium-ion battery architecture remains a crucial priority in the diversification of energy storage technologies. Accompanied by the low reduction potential of $\mathrm{Ca^{2+}/Ca}$, -2.87 V vs. SHE, metal-anode-based rechargeable Calcium (Ca) batteries appear competitive in terms of energy densities. However, the development of Ca-batteries lacks high-energy density intercalation cathode materials. Using first-principles methodologies, we screen a large chemical space for potential Ca-based cathode chemistries, with composition of $\mathrm{Ca_iTM_jZ_…
Electrochemical performance and diffusion kinetics of a NASICON type Na$_{3.3}$Mn$_{1.2}$Ti$_{0.75}$Mo$_{0.05}$(PO$_4$)$_3$/C cathode for low-cost sodium-ion batteries
Following the successful utilization of LiFePO4 as a novel cathode material for rechargeable lithium batteries, interest and efforts have grown in the research of another olivine structured material LiMnPO4 due to its higher operating potential voltage and energy density. However, high rate performance for LiMnPO4-based cathode materials has been challenging due to its extremely low electrical and ionic conductivities. Here, we develop a synthesis of Fe-doped LiMnPO4 (LiMn0.75Fe0.25PO4) nanorods directly bonded on graphene sheets (reduced from graphene oxide) to render LiMn0.75Fe0.25PO4 nanoro…
We report the electrochemical investigation of 5% Al doped MoS$_2$@rGO composite as a high-performance anode for sodium (Na)-ion batteries. The x-ray diffraction (XRD), Raman spectroscopy and high-resolution transmission electron microscopy characterizations reveal that the Al doping increase the interlayer spacing of (002) plane of MoS$_2$ nanosheets and form a stable 1T phase. The galvanostatic charge-discharge measurements show the specific capacity stable around 450, 400, 350, 300 and 200 mAhg$^{-1}$ at current densities of 0.05, 0.1, 0.3, 0.5 and 1~Ag$^{-1}$, respectively. Also, we observ…
