Chiral symmetry breaking for deterministic switching of perpendicular magnetization by spin-orbit torque
Hao Wu, John Nance, Seyed Armin Razavi, David Lujan, Bingqian Dai, Yuxiang Liu, Haoran He, Baoshan Cui, Di Wu, Kin Wong, Kemal Sobotkiewich, Xiaoqin Li, Gregory… 展开作者
Hao Wu, John Nance, Seyed Armin Razavi, David Lujan, Bingqian Dai, Yuxiang Liu, Haoran He, Baoshan Cui, Di Wu, Kin Wong, Kemal Sobotkiewich, Xiaoqin Li, Gregory P. Carman, Kang L. Wang
Symmetry breaking is a characteristic to determine which branch of a bifurcation system follows upon crossing a critical point. Specifically, in spin-orbit torque (SOT) devices, a fundamental question arises: how to break the symmetry of the perpendicular magnetic moment by the in-plane spin polarization? Here, we show that the chiral symmetry breaking by the DMI can induce the deterministic SOT switching of the perpendicular magnetization. By introducing a gradient of saturation magnetization or magnetic anisotropy, non-collinear spin textures are formed by the gradient of effective SOT strength, and thus the chiral symmetry of the SOT-induced spin textures is broken by the DMI, resulting in the deterministic magnetization switching. We introduce a strategy to induce an out-of-plane (z) gradient of magnetic properties, as a practical solution for the wafer-scale manufacture of SOT devices.
Spin-orbit torques (SOT) allow the electrical control of magnetic states. Current-induced SOT switching of the perpendicular magnetization is of particular technological importance. The SOT consists of damping-like and field-like torques so that the efficient SOT switching requires to understand combined effects of the two torque-components. Previous quasi-static measurements have reported an increased switching probability with the width of current pulses, as predicted with considering the damping-like torque only. Here we report a decreased switching probability at longer pulse-widths, based…
In ferromagnetic trilayers, a spin-orbit-induced spin current can have a spin polarization of which direction is deviated from that for the spin Hall effect. Recently, magnetization switching in ferromagnetic trilayers has been proposed and confirmed by the experiments. In this work, we theoretically and numerically investigate the switching current required for perpendicular magnetization switching in ferromagnetic trilayers. We confirm that the tilted spin polarization enables field-free deterministic switching at a lower current than conventional spin-orbit torque or spin-transfer torque sw…
Deterministic magnetization switching using spin-orbit torque (SOT) has recently emerged as an efficient means to electrically control the magnetic state of ultrathin magnets. The SOT switching still lacks in oscillatory switching characteristics over time, therefore, it is limited to bipolar operation where a change in polarity of the applied current or field is required for bistable switching. The coherent rotation based oscillatory switching schemes cannot be applied to SOT because the SOT switching occurs through expansion of magnetic domains. Here, we experimentally achieve oscillatory sw…
Spin valves incorporating perpendicularly magnetized materials are promising structures for memory elements and high-frequency generators. We report the angular dependence of the spin-transfer torque in spin valves with perpendicular equilibrium magnetization computed by first-principles circuit theory and compare results with experiments by W.H. Rippard c.s. [Phys. Rev. B 81, 014426 (2010)] on the CoFe|Cu|CoNi system. Furthermore, we predict a non-monotonous ("wavy") spin-transfer torque when the Cu spacer is replaced by a Ru layer.
To address thermal stability issues for spintronic devices with a reduced size, we investigate spin-orbit torque in Co/Pt multilayers with strong perpendicular magnetic anisotropy. Note that the spin-orbit torque arises from the global imbalance of the spin currents from the top and bottom interfaces for each Co layer. By inserting Ta or Cu layers to strengthen the top-down asymmetry, the spin-orbit torque efficiency can be greatly modified without compromised perpendicular magnetic anisotropy. Above all, the efficiency builds up as the number of layers increases, realizing robust thermal stab…
Current-induced spin-orbit torques provide a versatile tool for switching magnetic devices. In perpendicular magnets, the dampinglike component of the torque is the main driver of magnetization reversal. The degree to which the fieldlike torque assists the switching is a matter of debate. Here we study the switching of magnetic tunnel junctions with a CoFeB free layer and either W or Ta underlayers, which have a ratio of fieldlike to dampinglike torque of 0.3 and 1, respectively. We show that the fieldlike torque can either assist or hinder the switching of CoFeB when the static in-plane magne…
Current-induced spin-transfer torques (STT) and spin-orbit torques (SOT) enable the electrical switching of magnetic tunnel junctions (MTJs) in nonvolatile magnetic random access memories. In order to develop faster memory devices, an improvement of the timescales underlying the current driven magnetization dynamics is required. Here we report all-electrical time-resolved measurements of magnetization reversal driven by SOT in a three-terminal MTJ device. Single-shot measurements of the MTJ resistance during current injection reveal that SOT switching involves a stochastic two-step process con…
We report on the current-induced magnetization switching of a three-terminal perpendicular magnetic tunnel junction by spin-orbit torque and the read-out using the tunnelling magnetoresistance (TMR) effect. The device is composed of a perpendicular Ta/FeCoB/MgO/FeCoB stack on top of a Ta current line. The magnetization of the bottom FeCoB layer can be switched reproducibly by the injection of current pulses with density $5\times10^{11}$ A/m$^2$ in the Ta layer in the presence of an in-plane bias magnetic field, leading to the full-scale change of the TMR signal. Our work demonstrates the proof…
We use three-terminal magnetic tunnel junctions (MTJs) designed for field-free switching by spin-orbit torques (SOTs) to systematically study the impact of dual voltage pulses on the switching performances. We show that the concurrent action of an SOT pulse and an MTJ bias pulse allows for reducing the critical switching energy below the level typical of spin transfer torque while preserving the ability to switch the MTJ on the sub-ns time scale. By performing dc and real-time electrical measurements, we discriminate and quantify three effects arising from the MTJ bias: the voltage-controlled …
Flexible control of magnetization switching by electrical manners is crucial for applications of spin-orbitronics. Besides of a switching current that is parallel to an applied field, a bias current that is normal to the switching current is introduced to tune the magnitude of effective damping-like and field-like torques and further to electrically control magnetization switching. Symmetrical and asymmetrical control over the critical switching current by the bias current with opposite polarities is both realized in Pt/Co/MgO and $α$-Ta/CoFeB/MgO systems, respectively. This research not only …
Picosecond switching of the staggered antiferromagnetic order is shown to be realizable through spin-transfer torques from a short current pulse. The coupled dynamics of sublattice magnetization is mapped onto a classical pendulum subject to gravity and a driving pulse, where switching occurs if the pendulum acquires sufficient kinetic energy during the pulse to overcome the maximum of the effective gravity potential. The optimal switching scheme is explored through the dependence of switch angle and magnetic loss on the duration and strength of the current pulse. The physics discussed here pr…
The reversal of perpendicular magnetization (PM) by electric control is crucial for high-density integration of low-power magnetic random-access memory (MRAM). Although the spin-transfer torque (STT) and spin-orbit torque (SOT) technologies have been used to switch the magnetization of a free layer with perpendicular magnetic anisotropy, the former has limited endurance because of the high current density directly through the junction, while the latter requires an external magnetic field or unconventional configuration to break the symmetry. Here we propose and realize the orbit-transfer torqu…
Spin-orbit torques in noncentrosymmetric polycrystalline magnetic heterostructures are usually described in terms of field-like and damping-like torques. However, materials with a lower symmetry point group can exhibit torques whose behavior substantially deviates from the conventional ones. In particular, based on symmetry arguments it was recently proposed that systems belonging to the C_{3v} point group display spin-orbit torques that can promote field-free switching [Liu et al. Nature Nanotechnology 16, 277 (2021)]. In the present work, we analyze the general form of the torques expected i…
We show how the phase diagram for spin torque switching in the case of perpendicular anisotropy is altered at nonzero temperature. The hysteresis region in which the parallel and antiparallel states coexist shrinks, and a new region of telegraph noise appears. In a small sample, the region of coexistence of a precessional and parallel state can disappear entirely. We show that the phase diagram for both zero and nonzero temperatures can be understood and calculated by plotting an effective energy as a function of angle. A combinatorial analysis is useful for systematically describing the phase…
Spin-orbit torque (SOT) driven deterministic control of the magnetization state of a magnet with perpendicular magnetic anisotropy (PMA) is key to next generation spintronic applications including non-volatile, ultrafast, and energy efficient data storage devices. But, field-free deterministic switching of perpendicular magnetization remains a challenge because it requires an out-of-plane anti-damping torque, which is not allowed in conventional spin source materials such as heavy metals (HM) and topological insulators due to the system's symmetry. The exploitation of low-crystal symmetries in…
We have recently reported that the spin transfer torque switching current density is very sensitive to not only the junction sizes but also the exchange stiffness constants of the free layer according to the micromagnetic simulations. The results are very complicate and far from the macro-spin model because of the non-coherent spin switching processes. The dependence of the switching current density on the junction sizes and the exchange stiffness constants becomes systematic when we employ the non-collinear polarizer layer. It is found that the non-collinear polarizer layer enhances the coher…
We systematically survey on Pt$_{x}$Cu$_{1-x}$/Co/MgO magnetic heterostructure with perpendicular magnetic anisotropy and report a significant improvement on spin-orbit torque switching efficiency in Pt-Cu alloy system. The largest damping-like spin-orbit torque efficiency determined by hysteresis loop shift measurement is about 0.44 for Pt$_{0.57}$Cu$_{0.43}$, which is originated from the higher resistivity tuned by alloying. Moreover, from the results of current-induced switching measurements, a lower critical switching current density is achieved by proper alloying due to the simultaneous e…
Two promising strategies for achieving efficient control of magnetization in future magnetic memory and non-volatile spin logic devices are spin transfer torque from spin polarized currents and voltage-controlled magnetic anisotropy (VCMA). Spin transfer torque is in widespread development as the write mechanism for next-generation magnetic memory, while VCMA offers the potential of even better energy performance due to smaller Ohmic losses. Here we introduce a 3-terminal magnetic tunnel junction (MTJ) device that combines both of these mechanisms to achieve new functionality: gate-voltage-mod…
We report a giant spin Hall effect (SHE) in β-Ta that generates spin currents intense enough to induce efficient spin-transfer-torque switching of ferromagnets, thereby providing a new approach for controlling magnetic devices that can be superior to existing technologies. We quantify this SHE by three independent methods and demonstrate spin-torque (ST) switching of both out-of-plane and in-plane magnetized layers. We implement a three-terminal device that utilizes current passing through a low impedance Ta-ferromagnet bilayer to effect switching of a nanomagnet, with a higher-impedance magne…
The switching probability of a single-domain ferromagnet under spin-current excitation is evaluated using the Fokker-Planck equation(FPE). In the case of uniaxial anisotropy, the FPE reduces to an ordinary differential equation in which the lowest eigenvalue $λ_1$ determines the slowest switching events. We have calculated $λ_1$ by using both analytical and numerical methods. It is found that the previous model based on thermally distributed initial magnetization states \cite{Sun1} can be accurately justified in some useful limiting conditions.
We study the effect of the Dzyaloshinskii-Moriya interaction (DMI) on current-induced magnetic switching of a perpendicularly magnetized heavy-metal/ferromagnet/oxide trilayer both experimentally and through micromagnetic simulations. We report the generation of stable helical magnetization stripes for a sufficiently large DMI strength in the switching region, giving rise to intermediate states in the magnetization confirming the essential role of the DMI on switching processes. We compare the simulation and experimental results to a macrospin model, showing the need for a micromagnetic approa…
Current induced magnetization switching by spin-orbit torques offers an energy-efficient means of writing information in heavy metal/ferromagnet (FM) multilayer systems. The relative contributions of field-like torques and damping-like torques to the magnetization switching induced by the electrical current are still under debate. Here, we describe a device based on a symmetric Pt/FM/Pt structure, in which we demonstrate a strong damping-like torque from the spin Hall effect and unmeasurable field-like torque from Rashba effect. The spin-orbit effective fields due to the spin Hall effect were …
We report time-resolved measurements of current-induced reversal of a free magnetic layer in Py/Cu/Py elliptical nanopillars at temperatures T = 4.2 K to 160 K. Comparison of the data to Landau-Lifshitz-Gilbert macrospin simulations of the free layer switching yields numerical values for the spin torque and the Gilbert damping parameters as functions of T. The damping is strongly T-dependent, which we attribute to the antiferromagnetic pinning behavior of a thin permalloy oxide layer around the perimeter of the free layer. This adventitious antiferromagnetic pinning layer can have a major impa…
Spin orbit torque (SOT) provides an efficient way of generating spin current that promises to significantly reduce the current required for switching nanomagnets. However, an in-plane current generated SOT cannot deterministically switch a perpendicularly polarized magnet due to symmetry reasons. On the other hand, perpendicularly polarized magnets are preferred over in-plane magnets for high-density data storage applications due to their significantly larger thermal stability in ultra-scaled dimensions. Here we show that it is possible switch a perpendicularly polarized magnet by SOT without …
We develop a theoretical formula of spin Hall torque in the presence of two ferromagnets. While the direction of the conventional spin Hall torque always points to the in-plane direction, the present system enables to manipulate the torque direction acting on one magnetization by changing the direction of another magnetization. Based on the diffusion equation of the spin accumulation and the Landauer formula, we derive analytical formula of the spin Hall torque. The present model provides a solution to switch a perpendicular ferromagnet deterministically at zero field using the spin Hall effec…
We investigate current-induced magnetization switching for a multilayer structure that allows a reduced switching current while maintaining high thermal stability of the magnetization. The structure consists of a perpendicular polarizer, a perpendicular free-layer, and an additional free-layer having in-plane magnetization. When the current runs perpendicular to the structure, the in-plane free-layer undergoes a precession and supplies an internal rf field to the perpendicular free-layer, resulting in a reduced switching current for one current polarity. For the other polarity, the in-plane fr…
We theoretically investigate the switching of a perpendicular magnetic layer by in-plane charge current due to the spin Hall effect. We find that, in the high damping regime, the threshold switching current is independent of the damping constant, and is almost linearly proportional to both effective perpendicular magnetic anisotropy field and external in-plane field applied along the current direction. We obtain an analytic expression of the threshold current, in excellent agreement with numerical results. This expression can be used to determine the physical quantities associated with spin Ha…
Deterministic current-induced spin-orbit torque (SOT) switching of magnetization in a heavy transition metal/ferromagnetic metal/oxide magnetic heterostructure with the ferromagnetic layer being perpendicularly-magnetized typically requires an externally-applied in-plane field to break the switching symmetry. We show that by inserting an in-plane magnetized ferromagnetic layer CoFeB underneath the conventional W/CoFeB/MgO SOT heterostructure, deterministic SOT switching of the perpendicularly-magnetized top CoFeB layer can be realized without the need of in-plane bias field. Kerr imaging study…
The lack of certain crystalline symmetries in strong spin-orbit-coupled non-magnetic materials allows for the existence of uncoventional spin Hall responses, with electrically generated transverse spin currents possessing collinear flow and spin directions. The injection of such spin currents into an adjacent ferromagnetic layer can excite magnetization dynamics via unconventional spin-orbit torques, leading to deterministic switching in ferromagnets with perpendicular magnetic anisotropy. We study the interplay between conventional and unconventional spin-orbit torques on the magnetization dy…
The spin-orbit torque switching of ferrimagnetic Gd$_x$(Fe$_{90}$Co$_{10}$)$_{100-x}$ films was studied for both transition metal (TM)-rich and rare earth (RE)-rich configurations. The spin-orbit torque driven magnetization switching follows the same handedness in TM-rich and RE-rich samples with respect to the total magnetization, but the handedness of the switching is reversed with respect to the TM magnetization. This indicates that the sign of the spin-orbit-torque-driven magnetic switching follows the total magnetization, although transport based techniques such as anomalous Hall effect a…
Current induced spin-orbit torques have been studied in ferromagnetic nanowires made of 20 nm thick Co/Pd multilayers with perpendicular magnetic anisotropy. Using Hall voltage and lock-in measurements, it is found that upon injection of an electric current both in-plane (Slonczewski-like) and perpendicular (field-like) torques build up in the nanowire. The torque efficiencies are found to be as large as 1.17 kOe and 5 kOe at 108 A/cm2 for the in-plane and perpendicular components, respectively, which is surprisingly comparable to previous studies in ultrathin (~ 1 nm) magnetic bilayers. We sh…
Magnetic heterostructure Mo/CoFeB/MgO has strong perpendicular magnetic anisotropy and thermal stability. Through current-induced hysteresis loop shift measurements, we show that the dampinglike spin-orbit torque (SOT) efficiency of Mo/CoFeB/MgO heterostructure is $ξ_{DL}\approx -0.003\pm 0.001$ and fairly independent of the annealing temperature from 300$^\circ$C to 400$^\circ$C. Though $|ξ_{DL}|$ is small while compare to those from Ta or W-based heterostructures, reversible current-induced SOT switching of a thermally-stable Mo/CoFeB/MgO heterostruture can still be achieved. Furthermore, we…
We theoretically studied the thermally assisted spin torque switching of a synthetic free layer and showed that the switching time is minimized if the condition H_J=|H_s|/(2 alpha) is satisfied, where H_J, H_s and alpha are the coupling field of two ferromagnetic layers, the amplitude of the spin torque, and the Gilbert damping constant. We also showed that the coupling field of the synthetic free layer can be determined from the resonance frequencies of the spin-torque diode effect.
We report the possibility of achieving an order of magnitude reduction in the energy dissipation needed to write bits in perpendicular magnetic tunnel junctions (p-MTJs) by simulating the magnetization dynamics under a combination of resonant surface acoustic waves (r-SAW) and spin-transfer-torque (STT). The magnetization dynamics were simulated using the Landau-Lifshitz-Gilbert equation under macrospin assumption with the inclusion of thermal noise. The resonant magnetization dynamics in the magnetostrictive nanomagnet build over few 10s of cycles of SAW application that drives the magnetizat…
Spin waves in ferrimagnetic yttrium iron garnet (YIG) films with ultralow magnetic damping are relevant for magnon-based spintronics and low-power wave-like computing. The excitation frequency of spin waves in YIG is rather low in weak external magnetic fields because of its small saturation magnetization, which limits the potential of YIG films for high-frequency applications. Here, we demonstrate how exchange-coupling to a CoFeB film enables efficient excitation of high-frequency perpendicular standing spin waves (PSSWs) in nanometer-thick (80 nm and 295 nm) YIG films using uniform microwave…
We report that by measuring current-induced hysteresis loop shift versus in-plane bias magnetic field, the spin Hall effect (SHE) contribution of the current-induced effective field per current density, $χ_{SHE}$, can be estimated for Pt and Ta-based magnetic heterostructures with perpendicular magnetic anisotropy (PMA). We apply this technique to a Pt-based sample with its ferromagnetic (FM) layer being wedged-deposited and discover an extra effective field contribution, $χ_{Wedged}$, due to the asymmetric nature of the deposited FM layer. We confirm the correlation between $χ_{Wedged}$ and t…
We demonstrate efficient current induced spin orbit torque switching in perpendicularly magnetized epitaxial MgO(001)//Pd/Co2FeAl/MgO heterostructures grown by magnetron sputtering. The advantage of such heterostructures for spin orbit torque MRAM devices is that they allow a unique combination of critical ingredients: i) low resistivity required for reduced electric energy consumption during writing, ii) high TMR ratio required for efficient reading and iii) strong perpendicular magnetic anisotropy for increased thermal stability.
We proposed and demonstrated a simple method for detection of in-plane magnetization switching by spin-orbit torque (SOT) in bilayers of non-magnetic / magnetic materials. In our method, SOT is used not only for magnetization switching but also for detection. Our method can detect arbitrary Mx and My component without an external magnetic field, which is useful for fast characterization of type-X, type-Y, and type-XY SOT magnetization switching. Our SOT detection scheme can be utilized not only for fast characterization of SOT switching in bilayers, but also for electrical detection of in-plan…
Schemes of switching nanomagnetic memories via the effect of spin torque with various polarizations of injected electrons are studied. Simulations based on macrospin and micromagnetic theories are performed and compared. We demonstrate that switching with perpendicularly polarized current by short pulses and free precession requires smaller time and energy than spin torque switching with collinear in plane spin polarization; it is also found to be superior to other kinds of memories. We study the tolerances of switching to the magnitude of current and pulse duration. An increased Gilbert dampi…
The oscillation properties of a spin torque oscillator consisting of a perpendicularly magnetized free layer and an in-plane magnetized pinned layer are studied based on an analysis of the energy balance between spin torque and damping. The critical value of an external magnetic field applied normal to the film plane is found, below which the controllable range of the oscillation frequency by the current is suppressed. The value of the critical field depends on the magnetic anisotropy, the saturation magnetization, and the spin torque parameter.
A common ploy to reduce the switching current and energy dissipation in spin-transfer-torque driven magnetization switching of shape-anisotropic single-domain nanomagnets is to employ magnets with low saturation magnetization $M_s$ and high shape-anisotropy. The high shape-anisotropy compensates for low $M_s$ to keep the static switching error rate constant. However, this ploy increases the switching delay, its variance in the presence of thermal noise, and the dynamic switching error rate. Using the stochastic Landau-Lifshitz-Gilbert equation with a random torque emulating thermal noise, we s…
He$^+$ ion irradiation is used to pattern multiple areas of Pt/Co/W films with different irradiation doses in Hall bars. The resulting perpendicular magnetic anisotropy landscape enables selective multilevel current-induced switching, with full deterministic control of the position and order of the individual switching elements. Key pattern design parameters are specified, opening a way to scalable multilevel switching devices.
The magnetization dynamics of spin torque oscillator (STO) consisting of a perpendicularly magnetized free layer and an in-plane magnetized pinned layer was studied by solving the Landau-Lifshitz-Gilbert equation. We derived the analytical formula of the relation between the current and the oscillation frequency of the STO by analyzing the energy balance between the work done by the spin torque and the energy dissipation due to the damping. We also found that the field-like torque breaks the energy balance, and change the oscillation frequency.
Spin torque majority gates are modeled and several regimes of magnetization switching (some leading to failure) are discovered. The switching speed and noise margins are determined for STMGs and an adder based on it. With switching time of 3ns at current of 80uA, the adder computational throughput is comparable to that of a CMOS adder.
In large magnetoresistance devices spin torque-induced changes in resistance can produce GHz current and voltage oscillations which can affect magnetization reversal. In addition, capacitive shunting in large resistance devices can further reduce the current, adversely affecting spin torque switching. Here, we simultaneously solve the Landau-Lifshitz-Gilbert equation with spin torque and the transmission line telegrapher's equations to study the effects of resistance feedback and capacitance on magnetization reversal of both spin valves and magnetic tunnel junctions. While for spin valves para…
The spin torque switching rate of an in-plane magnetized system in the presence of an applied field is derived by solving the Fokker-Planck equation. It is found that three scaling currents are necessary to describe the current dependence of the switching rate in the low-current limit. The dependences of these scaling currents on the applied field strength are also studied.
We study the influence of the spin torque, which depends on the space and time derivative of magnetization, on magnetization reversal time in a ferromagnetic fine particle. The spin torque operates to dissipate the angular momentum of the magnetization precession, and the torque increases in a spin vortex structure. We calculate the magnetization reversal time under a DC magnetic field using the Landau-Lifshitz-Gilbert equation containing a spin torque term. We found that the spin torque changes the magnetization switching speed significantly during the reversal process by maintaining a spin v…
Spin-orbit torques are studied in Ta/TbFeCo patterned structures with a bulk perpendicular magnetic anisotropy (bulk-PMA) for the first time. The current-induced magnetization switching is investigated in the presence of a perpendicular, longitudinal, or transverse field. In order to rule out Joule heating effect, switching of the magnetization is also demonstrated using current pulses. It is found that the anti-damping torque correlated with spin Hall effect is very strong, and a spin Hall angle of about 0.12 is obtained. The field-like torque related with Rashba effect is negligible in this …
We apply a recently developed quantum theory of spin transfer torque to study the effect of the quantum noise in spin transfer process on the magnetization switching in spin-torque-driven devices. The quantum noise induces considerable fluctuation of the switching time at zero temperature. By including the thermal noise, the temperature dependence of the expectation value and standard deviation of the switching time are obtained in the Monte Carlo simulations, and the results are fitted to an effective first passage model. We expect that the predictions here are observable in the single-shot m…
We study current-induced switching in magnetic tunnel junctions (MTJs) in the presence of a field-like spin-transfer torque and titled pinned-layer magnetization in the high current limit at finite temperature. We consider both the Slonczewski and field-like torques with coefficients $a_J$ and $b_J $, respectively. At finite temperatures, $σ= b_J/a_J = \pm1$ leads to a smaller mean switching time compared that with $σ= 0$. The reduction of switching time in the presence of the field-like term is due to the alignment effect (for $σ> 0$) and the initial torque effect.
We report single-shot measurements of resistance versus time for thermally assisted spin-torque-driven switching in magnetic tunnel junctions. We achieve sufficient sensitivity to resolve the resistance signals leading up to switching, including the variations between individual switching events. Analyses of pre-switching thermal fluctuations allow detailed measurements of coherence times and variations in magnetization precession amplitude. We find that with a small in-plane hard-axis magnetic field the magnetization dynamics are more spatially coherent than for the case of zero field.
We simulate the spin torque-induced reversal of the magnetization in thin disks with perpendicular anisotropy at zero temperature. Disks typically smaller than 20 nm in diameter exhibit coherent reversal. A domain wall is involved in larger disks. We derive the critical diameter of this transition. Using a proper definition of the critical voltage, a macrospin model can account perfectly for the reversal dynamics when the reversal is coherent. The same critical voltage appears to match with the micromagnetics switching voltage regardless of the switching path.
We studied the spin torque switching of the single free layer in the thermally activated region by numerically solving the Landau-Lifshitz-Gilbert equation. We found that the temperature dependence of the switching time of the in-plane magnetized system is nonlinear, which means $b \neq 1$. Here, $b$ is the exponent of the current term in the switching rate formula and has been widely assumed to be unity. This result enables us to evaluate the thermal stability of spintronics devices.
The current dependence of the switching barrier for spin torque switching of an in-plane magnetized ferromagnet was studied. Two scaling currents, I_{c}$ and I_{c}^{*}(>I_{c}), were introduced to distinguish the magnetization stability. In the low-current region I<I_{c}, the switching barrier is linear to the current with another scaling current \tilde{I}_{c}, while such linear scaling does not hold in the high-current region I_{c} < I < I_{c}^{*}. The linear scaling is valid for the high temperature and the long current pulse duration time.
The spin torque assisted thermal switching of the single free layer was studied theoretically. Based on the rate equation, we derived the theoretical formulas of the most likely and mean switching currents of the sweep current assisted magnetization switching, and found that the value of the exponent $b$ in the switching rate formula significantly affects the estimation of the retention time of magnetic random access memory. Based on the Fokker-Planck approach, we also showed that the value of $b$ should be two, not unity as argued in the previous works.
