We use fast periodic control to realize finite-time Otto cycles exhibiting quantum advantage. Such periodic modulation of the working medium - bath interaction Hamiltonian during the thermalization strokes can give rise to non-Markovian anti-Zeno dynamics, and corresponding reduction in the thermalization times. Faster thermalization can in turn significantly enhance the power output in engines, or equivalently, the rate of refrigeration in refrigerators. This improvement in performance of dynamically controlled Otto thermal machines arises due to the time-energy uncertainty relation of quantum mechanics.
To reveal the role of the quantumness in the Otto cycle and to discuss the validity of the thermodynamic uncertainty relation (TUR) in the cycle, we study the quantum Otto cycle and its classical counterpart. In particular, we calculate exactly the mean values and relative error of thermodynamic quantities. In the quasistatic limit, quantumness reduces the productivity and precision of the Otto cycle compared to that in the absence of quantumness, whereas in the finite-time mode, it can increase the cycle's productivity and precision. Interestingly, as the strength (heat conductance) between t…
We study a quantum Otto cycle that uses a 2-qubit working substance whose Hamiltonian does not commute with itself at different times during unitary strokes. We investigate how the cycle responds to the loss of quantum adiabaticity when these strokes are operated with a finite duration. We find that qualitative features such as the possibility of counter-rotating cycles operating as heat engines, or a cycle efficiency that can increase with a decrease in the temperature difference between the baths, are resilient even to highly nonadiabatic strokes. However, cycle efficiency rapidly decreases,…
We study the performance of a quantum Otto cycle driven by trapping potentials of the form $V_t(x) \sim x^{2q}$. This family of potentials possesses a simple scaling property which allows for analytical insights into the efficiency and work output of the cycle. We show that, while both the mean work output and the efficiency of two Otto cycles in different trapping potentials can be made equal, the work probability distribution will still be strongly affected by the difference in structure of the energy levels. Lastly, we perform a comparison of quantum Otto cycles in various physically releva…
We consider the optimization of the work output and fluctuations of a finite-time quantum Otto heat engine cycle consisting of compression and expansion work strokes of unequal duration. The asymmetry of the cycle is characterized by a parameter $r_u$ giving the ratio of the times for the compression and expansion work strokes. For such an asymmetric quantum Otto engine cycle, with working substance chosen as a harmonic oscillator or a two-level system, we find that the optimal values of $r_u$ maximising the work output and the reliability (defined as the ratio of average work output to its st…
Properties of the coupled particles with spin 3/2 (quartits) in a constant magnetic field, as a working substance in the quantum Otto cycle of the heat engine, are considered. It is shown that this system as a converter of heat energy in work (i) shows the efficiency 1 at the negative absolute temperatures of heat baths, (ii) at the temperatures of the opposite sign the efficiency approaches to 1, (iii) at the positive temperatures of heat baths antiferromagnetic interaction raises efficiency threefold in comparison with uncoupled particles.
Recent experimental breakthroughs produced the first nano heat engines that have the potential to harness quantum resources. An instrumental question is how their performance measures up against the efficiency of classical engines. For single ion engines undergoing quantum Otto cycles it has been found that the efficiency at maximal power is given by the Curzon-Ahlborn efficiency. This is rather remarkable as the Curzon-Alhbron efficiency was originally derived for endoreversible Carnot cycles. Here, we analyze two examples of endoreversible Otto engines within the same conceptual framework as…
The stochastic efficiency [G. Verley et al., Nat. Commun. 5, 4721 (2014)] was introduced to evaluate the performance of energy-conversion machines in micro-scale. However, such an efficiency generally diverges when no heat is absorbed while work is produced in a thermodynamic cycle. As a result, any statistical moments of the efficiency do not exist. In this study, we come up with a different version of the definition for the stochastic efficiency which is always finite. Its mean value is equal to the conventional efficiency, and higher moments characterize the fluctuations of the cycle. In ad…
In this paper, we study the role and relevance of the cost for an invariant-based shortcut to adiabaticity enabled qubit heat engine operates in a quantum Otto cycle. We consider a qubit heat engine with Landau-Zener Hamiltonian and improve its performance using the Lewis-Riesenfeld invariant-based shortcut to adiabaticity method. Addressing the importance of cost for better performance, the paper explores its relationship with the work and efficiency of the heat engine. We analyze the cost variation with the time duration of non-adiabatic unitary processes involved in the heat engine cycle. T…
We propose a quantum Otto cycle based on the properties of a two-level system in a realistic out-of-thermal-equilibrium electromagnetic field acting as its sole reservoir. This steady configuration is produced without the need of active control over the state of the environment, which is a non-coherent thermal radiation, sustained only by external heat supplied to macroscopic objects. Remarkably, even for non-ideal finite-time transformations, it largely over-performs the standard ideal Otto cycle, and asymptotically achieves unit efficiency at finite power.
The influence of the dynamical Stark shift on the thermal entanglement and the efficiency of the quantum Otto cycle is studied for the su(1,1) Tavis-Cummings system. It is shown that the degree of the thermal entanglement becomes larger as the dynamical Stark shift increases. In contrast, the efficiency of the Otto cycle is degraded with an increase of the values of dynamical Stark shift. Expressions for the efficiency coefficient are derived. Using those expressions we identify the maximal efficiency of the quantum Otto cycle from the experimentally measured values of the dynamical Stark shif…
We study a quantum Otto cycle in which the strokes are performed in finite time. The cycle involves energy measurements at the end of each stroke to allow for the respective determination of work. We then optimize for the work and efficiency of the cycle by varying the time spent in the different strokes and find that the optimal value of the ratio of time spent on each stroke goes through sudden changes as the parameters of this cycle vary continuously. The position of these discontinuities depends on the optimized quantity under consideration such as the net work output or the efficiency.
We investigate a heat engine with a finite length Kitaev chain in an Otto cycle. Finite size effects are taken into account using method of Hill's nano-thermodynamics as well as using the method of temperature dependent energy levels. We distinguish the bulk and boundary contributions to the efficiency and the work output of Kitaev chain engine and identify them as non-Otto heat engine and refrigerator cycles, respectively. Possibility of separately running Otto engine cycles associated with the bulk and the whole system, and an Otto refrigerator at the boundary is pointed out. It is found tha…
We consider a finite-time Otto engine operating on a quantum harmonic oscillator and driven by shortcut-to-adiabaticity (STA) techniques to speed up its cycle. We study its efficiency and power when internal friction, time-averaged work, and work fluctuations are used as quantitative figures of merit, showing that time-averaged efficiency and power are useful cost functions for the characterization of the performance of the engine. We then use the minimum allowed time for validity of STA protocol relation to establish a physically relevant bound to the efficiency at maximum power of the STA-dr…
The optimization of finite-time thermodynamic heat engines was intensively explored recently, yet limited to few cycles, e.g. finite-time Carnot-like cycle. In this paper, we supplement a new type of finite-time engine with quantum Otto cycle and show the better performance. The current model can be widely utilized benefited from the general \mathcal{C}/τ^{2} scaling of extra work for finite-time adiabatic process with long control time τ. Such scaling allows analytical optimization of the generic finite-time quantum Otto cycle to surpass the efficiency at maximum power for the Carnot-like eng…
The availability of controllable macroscopic devices, which maintain quantum coherence over relatively long time intervals, for the first time allows an experimental realization of many effects previously considered only as Gedankenexperiments, such as the operation of quantum heat engines. The theoretical efficiency ηof quantum heat engines is restricted by the same Carnot boundary η_C as for the classical ones: any deviations from quasistatic evolution suppressing ηbelow η_C. Here we investigate an implementation of an analog of the Otto cycle in a tunable quantum coherent circuit and show t…
We study the 1-d isotropic Heisenberg model of two spin-1/2 systems as a quantum heat engine. The engine undergoes a four-step Otto cycle where the two adiabatic branches involve changing the external magnetic field at a fixed value of the coupling constant. We find conditions for the engine efficiency to be higher than the uncoupled model; in particular, we find an upper bound which is tighter than the Carnot bound. A new domain of parameter values is pointed out which was not feasible in the interaction-free model. Locally, each spin seems to effect the flow of heat in a direction opposite t…
We investigate quantum Otto engine and refrigeration cycles of a time-dependent harmonic oscillator operating under the conditions of maximum $Ω$-function, a trade-off objective function which represents a compromise between energy benefits and losses for a specific job, for both adiabatic and nonadiabatic (sudden) frequency modulations. We derive analytical expressions for the efficiency and coefficient of performance of the Otto cycle. For the case of adiabatic driving, we point out that in the low-temperature regime, the harmonic Otto engine (refrigerator) can be mapped to Feynman's ratchet…
Quantum thermal machines make use of non-classical thermodynamic resources, one of which is interactions between elements of the quantum working medium. In this paper, we examine the performance of a quasi-static quantum Otto engine based on two spins of arbitrary magnitudes subject to an external magnetic field and coupled via an isotropic Heisenberg exchange interaction. It has been earlier shown that the said interaction provides an enhancement of cycle efficiency for two spin-1/2 particles, with an upper bound which is tighter than the Carnot efficiency. However, the necessary conditions g…
We investigate a heat engine with a finite-length Kitaev chain in an ideal Otto cycle. It is found that the critical point of the topological phase transition coincides with the maxima of the efficiency and work output of the total Otto engine. Finite-size effects are taken into account using the method of Hill's nanothermodynamics, as well as using the method of temperature-dependent energy levels. We identify the bulk and boundary thermal cycles of the Kitaev chain engine and find that they are non-ideal Otto cycles. The physics of deviation from ideal Otto cycle is identified as a finite si…
From the thermodynamic equilibrium properties of a two-level system with variable energy-level gap $Δ$, and a careful distinction between the Gibbs relation $dE = T dS + (E/Δ) dΔ$ and the energy balance equation $dE = δQ^\leftarrow - δW^\to$, we infer some important aspects of the second law of thermodynamics and, contrary to a recent suggestion based on the analysis of an Otto-like thermodynamic cycle between two values of $Δ$ of a spin-1/2 system, we show that a quantum thermodynamic Carnot cycle, with the celebrated optimal efficiency $1 - (T_{low}/T_{high})$, is possible in principle with …
We consider a quasi-static quantum Otto cycle using two effectively two-level systems with degeneracy in the excited state. The systems are coupled through isotropic exchange interaction of strength $J>0$, in the presence of an external magnetic field $B$ which is varied during the cycle. We prove the positive work condition, and show that level-degeneracy can act as a thermodynamic resource, so that a larger amount of work can be extracted than from the non-degenerate case, both with and without coupling. We also derive an upper bound for the efficiency of the cycle. This bound is the same as…
We consider a quantum Otto refrigerator cycle of a time-dependent harmonic oscillator. We investigate the coefficient of performance at maximum figure of merit for adiabatic and nonadiabatic frequency modulations. We obtain analytical expressions for the optimal performance both in the high-temperature (classical) regime and in the low-temperature (quantum) limit. We moreover analyze the breakdown of the cooling cycle for strongly nonadiabatic driving protocols and derive analytical estimates for the minimal driving time allowed for cooling.
The concept of inner friction, by which a quantum heat engine is unable to follow adiabatically its strokes and thus dissipates useful energy, is illustrated in an exact physical model where the working substance consists of an ensemble of misaligned spins interacting with a magnetic field and performing the Otto cycle. The effect of this static disorder under a finite-time cycle gives a new perspective of the concept of inner friction under realistic settings. We investigate the efficiency and power of this engine and relate its performance to the amount of friction from misalignment and to t…
We study the finite-time effects in a quantum Otto cycle where a collective spin system is used as the working fluid. Starting from a simple one-qubit system we analyze the transition to the limit cycle in the case of a finite-time thermalization. If the system consists of a large sample of independent qubits interacting coherently with the heat bath, the superradiant equilibration is observed. We show that this phenomenon can boost the power of the engine. Mutual interaction of qubits in the working fluid is modeled by the Lipkin-Meshkov-Glick Hamiltonian. We demonstrate that in this case the…
Efficiency Enhancement up to Unity in a Generalized Quantum Otto Engine: Comparative Analysis with Conventional Quantum Otto Engine Utilizing a Two-Qubit Heisenberg XXZ Chain
We discuss a model of a closed quantum evolution of two-qubits where the joint Hamiltonian is so chosen that one of the qubits acts as a bath and thermalize the other qubit which is acting as the system. The corresponding exact master equation for the system is derived. Interestingly, for a specific choice of parameters the master equation takes the Gorini-Kossakowski-Lindblad-Sudarshan (GKLS) form with constant coefficients, representing pumping and damping of a single qubit system. Based on this model we construct an Otto cycle connected to a single qubit bath and study its thermodynamic pro…
Conducting an open quantum system towards a desired steady state through reservoir engineering is a remarkable task that takes dissipation and decoherence as tools rather than impediments. Here we develop a collisional model to implement reservoir engineering for the one-dimensional harmonic motion of a trapped ion. Our scheme is based on the pulsed interaction between the vibrational mode and the electronic levels of a trapped ion, which is promoted by resolved-sideband lasers. Having multiple internal levels, we show that multiple reservoirs can be engineered, allowing for more efficient syn…
We study a driven harmonic oscillator operating an Otto cycle between two thermal baths of finite size. By making extensive use of the tools of Gaussian quantum mechanics, we directly simulate the dynamics of the engine as a whole, without the need to make any approximations. This allows us to understand the non-equilibrium thermodynamics of the engine not only from the perspective of the working medium, but also as it is seen from the thermal baths' standpoint. For sufficiently large baths, our engine is capable of running a number of ideal cycles, delivering finite power while operating very…
We investigate a quantum heat engine with a working substance of two particles, one with a spin $1/2$ and the other with an arbitrary spin (spin $s$), coupled by Heisenberg exchange interaction, and subject to an external magnetic field. The engine operates in a quantum Otto cycle. Work harvested in the cycle and its efficiency are calculated using quantum thermodynamical definitions. It is found that the engine has higher efficiencies at higher spins and can harvest work at higher exchange interaction strengths. The role of exchange coupling and spin $s$ on the work output and the thermal eff…
Uniformly accelerated frame mimics a thermal bath whose temperature is proportional to the proper acceleration. Using this phenomenon we give a detailed construction of an Otto cycle between two energy eigenstates of a system, consists of two entangled qubits. In the isochoric stages the thermal bath is being provided via the vacuum fluctuations of the background field for a monopole interaction by accelerating them. We find that making of Otto cycle is possible when one qubit is accelerating in the right Rindler wedge and other one is moving in the left Rindler wedge; i.e. in anti-parallel mo…
We propose an arbitrary driven spin as the working fluid of a quantum Otto cycle in the presence of internal friction. The role of total allocated time to the adiabatic branches of the cycle, generated by different control field profiles, on the extractable work and the thermal efficiency are analyzed in detail. The internal friction is characterized by the excess entropy production and quantitatively determined by studying the closeness of an actual unitary process to an infinitely long one via quantum relative entropy. It is found that the non-ideal, finite-time adiabatic transformations neg…
Lipkin-Meshkov-Glick model of two anisotropically interacting spins in a magnetic field is proposed as a working substance of a quantum Otto engine to explore and exploit the anisotropy effects for the optimization of engine operation. Three different cases for the adiabatic branches of the cycle have been considered. In the first two cases, either the magnetic field or coupling strength are changed; while in the third case, both the magnetic field and the coupling strength are changed by the same ratio. The system parameters for which the engine can operate similar to or dramatically differen…
The quantum Otto cycle serves as a bridge between the macroscopic world of heat engines and the quantum regime of thermal devices composed from a single element. We compile recent studies of the quantum Otto cycle with a harmonic oscillator as a working medium. This model has the advantage that it is analytically trackable. In addition, an experimental realization has been achieved employing a single ion in a harmonic trap. The review is embedded in the field of quantum thermodynamics and quantum open systems. The basic principles of the theory are explained by a specific example illuminating …
We suggest alternative quantum Otto engines, using heat bath algorithmic cooling with partner pairing algorithm instead of isochoric cooling. Liquid state nuclear magnetic resonance systems in one entropy sink are considered as working fluids. Then, the extractable work and thermal efficiency are analyzed in detail for four-stroke and two-stroke type of quantum Otto engines. The role of heat bath algorithmic cooling in these cycles is to use a single entropy sink instead of two. Also, this cooling algorithm increases the power of engines reducing the time required for one cycle.
We study a limit cycle of a quantum Otto engine whose each cycle consists of two finite-time quantum isochoric (heating or cooling) processes and two quantum adiabatic work-extracting processes. Considering a two-level system as a working substance that weakly interacts with two reservoirs comprising an infinite number of bosons, we investigate the non-Markovian effect (short-time behavior of the reduced dynamics in the quantum isochoric processes (QIPs)) on work extraction after infinite repetition of the cycles. We focus on the parameter region where energy transferred to the reservoir can c…
We propose a relativistic quantum Otto cycle between an entangled state of two qubits and their composite excited (or ground) state whose efficiency can be greater than the usual single qubit quantum Otto engine. The hot and cold reservoirs are constructed by providing uniform accelerations to these qubits along with the interaction between the background field and individual qubits. The efficiency, as measured from one of the qubits' frame, not only depends on the energy gap of the states but also the relative acceleration between them. For lower acceleration of our observer's qubit compared …
We introduce a quantum heat engine performing an Otto cycle by using the thermal properties of the quantum vacuum. Since Hawking and Unruh, it has been established that the vacuum space, either near a black hole or for an accelerated observer, behaves as a bath of thermal radiation. In this work, we present a fully quantum Otto cycle, which relies on the Unruh effect for a single quantum bit (qubit) in contact with quantum vacuum fluctuations. By using the notions of quantum thermodynamics and perturbation theory we obtain that the quantum vacuum can exchange heat and produce work on the qubit…
