We investigate a quantum heat engine with a working substance of two particles, one with a spin $1/2$ and the other with an arbitrary spin (spin $s$), coupled by Heisenberg exchange interaction, and subject to an external magnetic field. The engine operates in a quantum Otto cycle. Work harvested in the cycle and its efficiency are calculated using quantum thermodynamical definitions. It is found that the engine has higher efficiencies at higher spins and can harvest work at higher exchange interaction strengths. The role of exchange coupling and spin $s$ on the work output and the thermal efficiency is studied in detail. In addition, the engine operation is analyzed from the perspective of local work and efficiency. The local work definition is generalized for the global changes and the conditions when the global work can be equal or more than the sum of the local works are determined.
Recent experimental breakthroughs produced the first nano heat engines that have the potential to harness quantum resources. An instrumental question is how their performance measures up against the efficiency of classical engines. For single ion engines undergoing quantum Otto cycles it has been found that the efficiency at maximal power is given by the Curzon-Ahlborn efficiency. This is rather remarkable as the Curzon-Alhbron efficiency was originally derived for endoreversible Carnot cycles. Here, we analyze two examples of endoreversible Otto engines within the same conceptual framework as…
We derive the probability distribution of the efficiency of a quantum Otto engine. We explicitly compute the quantum efficiency statistics for an analytically solvable two-level engine. We analyze the occurrence of values of the stochastic efficiency above unity, in particular at infinity, in the nonadiabatic regime and further determine mean and variance in the case of adiabatic driving. We finally investigate the classical-to-quantum transition as the temperature is lowered.
We investigate quantum Otto engine and refrigeration cycles of a time-dependent harmonic oscillator operating under the conditions of maximum $Ω$-function, a trade-off objective function which represents a compromise between energy benefits and losses for a specific job, for both adiabatic and nonadiabatic (sudden) frequency modulations. We derive analytical expressions for the efficiency and coefficient of performance of the Otto cycle. For the case of adiabatic driving, we point out that in the low-temperature regime, the harmonic Otto engine (refrigerator) can be mapped to Feynman's ratchet…
We propose a quantum Otto cycle based on the properties of a two-level system in a realistic out-of-thermal-equilibrium electromagnetic field acting as its sole reservoir. This steady configuration is produced without the need of active control over the state of the environment, which is a non-coherent thermal radiation, sustained only by external heat supplied to macroscopic objects. Remarkably, even for non-ideal finite-time transformations, it largely over-performs the standard ideal Otto cycle, and asymptotically achieves unit efficiency at finite power.
We study internal work optimization over the energy levels of a generic hot quantum Otto engine. We find universal features in the efficiency that resembles the classical external power optimization over the coupling times to the thermal baths. It is shown that in the ultra hot regime the efficiency is determined solely by the optimization constraint, and independent of the engine details. We show that for some constraints the radius of convergence of the perturbative approach used in the classical analysis is zero even for very arbitrarily low efficiencies at small temperature difference.
We consider a finite-time Otto engine operating on a quantum harmonic oscillator and driven by shortcut-to-adiabaticity (STA) techniques to speed up its cycle. We study its efficiency and power when internal friction, time-averaged work, and work fluctuations are used as quantitative figures of merit, showing that time-averaged efficiency and power are useful cost functions for the characterization of the performance of the engine. We then use the minimum allowed time for validity of STA protocol relation to establish a physically relevant bound to the efficiency at maximum power of the STA-dr…
We investigate a heat engine with a finite length Kitaev chain in an Otto cycle. Finite size effects are taken into account using method of Hill's nano-thermodynamics as well as using the method of temperature dependent energy levels. We distinguish the bulk and boundary contributions to the efficiency and the work output of Kitaev chain engine and identify them as non-Otto heat engine and refrigerator cycles, respectively. Possibility of separately running Otto engine cycles associated with the bulk and the whole system, and an Otto refrigerator at the boundary is pointed out. It is found tha…
We study two-mode bosonic engines undergoing an Otto cycle. The energy exchange between the two bosonic systems is provided by a tunable unitary bilinear interaction in the mode operators modeling frequency conversion, whereas the cyclic operation is guaranteed by relaxation to two baths at different temperature after each interacting stage. By means of a two-point-measurement approach we provide the joint probability of the stochastic work and heat. We derive exact expressions for work and heat fluctuations, identities showing the interdependence among average extracted work, fluctuations and…
We consider the optimization of the work output and fluctuations of a finite-time quantum Otto heat engine cycle consisting of compression and expansion work strokes of unequal duration. The asymmetry of the cycle is characterized by a parameter $r_u$ giving the ratio of the times for the compression and expansion work strokes. For such an asymmetric quantum Otto engine cycle, with working substance chosen as a harmonic oscillator or a two-level system, we find that the optimal values of $r_u$ maximising the work output and the reliability (defined as the ratio of average work output to its st…
In finite-time quantum heat engines, some work is consumed to drive a working fluid accompanying coherence, which is called `friction'. To understand the role of friction in quantum thermodynamics, we present a couple of finite-time quantum Otto cycles with two different baths: Agarwal versus Lindbladian. We solve them exactly and compare the performance of the Agarwal engine with that of the Lindbladian engine. In particular, we find remarkable and counterintuitive results that the performance of the Agarwal engine due to friction can be much higher than that in the quasistatic limit with the…
The quantum heat engines have drawn much attention due to miniaturization of devices recently. We study the dynamics of the quantum Otto heat engine using the driven-dissipative Schrödinger equation. Starting from different initial states, we simulate the time evolutions of the internal energy, power and heat-work conversion efficiency. The initial state impacts on these thermodynamic quantities before the Otto cycle reaches stable. In the transition period, the efficiency and power may be higher or lower than the corresponding values in the cyclostationary state. Remarkably, the efficiency co…
Graphene is perhaps the most prominent "Dirac material," a class of systems whose electronic structure gives rise to charge carriers that behave as relativistic fermions. In multilayer graphene several crystal sheets are stacked such that the honeycomb lattice of each layer is displaced along one of the lattice edges. When subject to an external magnetic field, the scaling of the multilayer energy spectrum with the magnetic field, and thus the system's thermodynamic behavior, depends strongly on the number of layers. With this in mind, we examine the performance of a finite-time endoreversible…
In this paper, we study the role and relevance of the cost for an invariant-based shortcut to adiabaticity enabled qubit heat engine operates in a quantum Otto cycle. We consider a qubit heat engine with Landau-Zener Hamiltonian and improve its performance using the Lewis-Riesenfeld invariant-based shortcut to adiabaticity method. Addressing the importance of cost for better performance, the paper explores its relationship with the work and efficiency of the heat engine. We analyze the cost variation with the time duration of non-adiabatic unitary processes involved in the heat engine cycle. T…
Efficiency Enhancement up to Unity in a Generalized Quantum Otto Engine: Comparative Analysis with Conventional Quantum Otto Engine Utilizing a Two-Qubit Heisenberg XXZ Chain
We investigate a heat engine with a finite-length Kitaev chain in an ideal Otto cycle. It is found that the critical point of the topological phase transition coincides with the maxima of the efficiency and work output of the total Otto engine. Finite-size effects are taken into account using the method of Hill's nanothermodynamics, as well as using the method of temperature-dependent energy levels. We identify the bulk and boundary thermal cycles of the Kitaev chain engine and find that they are non-ideal Otto cycles. The physics of deviation from ideal Otto cycle is identified as a finite si…
We propose a quantum Otto cycle in a two spin-$1/2$ anisotropic XY model in a transverse external magnetic field. We first characterize the parameter regime that the working medium operates as an engine in the adiabatic regime. Then, we consider finite-time behavior of the engine with and without utilizing a shortcut to adiabaticity (STA) technique. STA schemes guarantee that the dynamics of a system follows the adiabatic path, at the expense of introducing an external control. We compare the performance of the non-adiabatic and STA engines for a fixed adiabatic efficiency but different parame…
Quantum heat engine with ideal gas has been well studied, yet the role of interaction was seldom explored. We construct a quantum Otto heat engine with N repulsive Bosonic particles in a 1D hard wall box. With the advantage of exact solution using Bethe Ansatz, we obtain not only the exact numerical result of efficiency in all interacting strength c, but also analytical results for strong interaction. We find the efficiency ηrecovers to the one of non-interacting case $η_{\mathrm{non}}=1-(L_{1}/L_{2})^{2}$ for strong interaction with asympotic behavior $η\simη_{\mathrm{non}}-4(N-1)L_{1}\left(L…
We study a driven harmonic oscillator operating an Otto cycle between two thermal baths of finite size. By making extensive use of the tools of Gaussian quantum mechanics, we directly simulate the dynamics of the engine as a whole, without the need to make any approximations. This allows us to understand the non-equilibrium thermodynamics of the engine not only from the perspective of the working medium, but also as it is seen from the thermal baths' standpoint. For sufficiently large baths, our engine is capable of running a number of ideal cycles, delivering finite power while operating very…
To optimize the performance of a heat engine in finite-time cycle, it is important to understand the finite-time effect of thermodynamic processes. Previously, we have shown that extra work is needed to complete a quantum adiabatic process in finite time, and proved that the extra work follows a \mathcal{C}/τ^{2} scaling for long control time τ. There the oscillating part of the extra work is neglected due to the complex energy-level structure of the particular quantum system. However, such oscillation of the extra work can not be neglected in some quantum systems with simple energy-level stru…
We suggest alternative quantum Otto engines, using heat bath algorithmic cooling with partner pairing algorithm instead of isochoric cooling. Liquid state nuclear magnetic resonance systems in one entropy sink are considered as working fluids. Then, the extractable work and thermal efficiency are analyzed in detail for four-stroke and two-stroke type of quantum Otto engines. The role of heat bath algorithmic cooling in these cycles is to use a single entropy sink instead of two. Also, this cooling algorithm increases the power of engines reducing the time required for one cycle.
It is investigated whether non-Markovianity, i.e., the memory effects resulting from the coupling of the system to its environment, can be beneficial for the performance of quantum heat engines. Specifically, two physical models are considered. The first one is a well known single-qubit Otto engine; the non-Markovian behaviour is there implemented by replacing standard thermalization strokes with so-called extremal thermal operations which cannot be realized without the memory effects. The second one is a three-stroke engine in which the cycle consists of two extremal thermal operations and a …
We consider a quasi-static quantum Otto cycle using two effectively two-level systems with degeneracy in the excited state. The systems are coupled through isotropic exchange interaction of strength $J>0$, in the presence of an external magnetic field $B$ which is varied during the cycle. We prove the positive work condition, and show that level-degeneracy can act as a thermodynamic resource, so that a larger amount of work can be extracted than from the non-degenerate case, both with and without coupling. We also derive an upper bound for the efficiency of the cycle. This bound is the same as…
A quantum Otto heat engine is studied with multilevel identical particles trapped in one-dimensional box potential as working substance. The symmetrical wave function for Bosons and the anti-symmetrical wave function for Fermions are considered. In two-particle case, we focus on the ratios of $W^i$ ($i=B,F$) to $W_s$, where $W^B$ and $W^F$ are the work done by two Bosons and Fermions respectively, and $W_s$ is the work output of a single particle under the same conditions. Due to the symmetric of the wave functions, the ratios are not equal to $2$. Three different regimes, low temperature regi…
We construct an entangled quantum Otto engine based on spin-1/2 systems undergoing Dzyaloshinski-Moriya (DM) interaction within a varying magnetic field. We investigate the influence of the DM interaction on basic thermodynamic quantities, including heat transfer, work done, and efficiency and find that the DM interaction importantly influences the engine's thermodynamics. We obtain an expression for engine efficiency, finding it to yield the same efficiency for antiferromagnetic and ferromagnetic coupling. A new upper bound, nontrivially consistent with the second law of thermodynamics, is de…
Quantum thermal machines make use of non-classical thermodynamic resources, one of which is interactions between elements of the quantum working medium. In this paper, we examine the performance of a quasi-static quantum Otto engine based on two spins of arbitrary magnitudes subject to an external magnetic field and coupled via an isotropic Heisenberg exchange interaction. It has been earlier shown that the said interaction provides an enhancement of cycle efficiency for two spin-1/2 particles, with an upper bound which is tighter than the Carnot efficiency. However, the necessary conditions g…
We study a limit cycle of a quantum Otto engine whose each cycle consists of two finite-time quantum isochoric (heating or cooling) processes and two quantum adiabatic work-extracting processes. Considering a two-level system as a working substance that weakly interacts with two reservoirs comprising an infinite number of bosons, we investigate the non-Markovian effect (short-time behavior of the reduced dynamics in the quantum isochoric processes (QIPs)) on work extraction after infinite repetition of the cycles. We focus on the parameter region where energy transferred to the reservoir can c…
Power-efficiency trade-off for finite-time quantum harmonic Otto heat engine via phase-space approach
School of Physics, Korea Institute for Advanced Study（韩国高等科学研究院物理学院）；Asia Pacific Center for Theoretical Physics（亚太理论物理中心）；Department of Physics, POSTECH（韩国科学技术院物理系）
We consider a quantum Otto cycle operating between two squeezed thermal reservoirs. The influences of the squeezing degree on the optimization performance of quantum Otto heat engines and refrigerators are investigated. We demonstrate that under symmetric condition, the efficiency at maximum power (EMP) of heat engines and the coefficient of performance (COP) at maximum \c{hi} criterion of refrigerators are equal to Curzon-Ahlborn (CA) efficiency and CA COP, respectively. We also found that under asymmetric condition, the EMP of heat engines can be improved when the squeezing degree of hot the…
Abstract We perform an experiment in which a quantum heat engine works under two reservoirs, one at a positive spin temperature and the other at an effective negative spin temperature i.e., when the spin system presents population inversion. We show that the efficiency of this engine can be greater than that when both reservoirs are at positive temperatures. We also demonstrate the counter-intuitive result that the Otto efficiency can be beaten only when the quantum engine is operating in the finite-time mode.
Recent theoretical and experimental studies in quantum heat engines show that, in the quasi-static regime, it is possible to have higher efficiency than the limit imposed by Carnot, provided that engineered reservoirs are used. The quasi-static regime, however, is a strong limitation to the operation of heat engines, since infinitely long time is required to complete a cycle. In this paper we propose a two-level model as the working substance to perform a quantum Otto heat engine surrounded by a cold thermal reservoir and a squeezed hot thermal reservoir. Taking advantage of this model we show…
We demonstrate how a quantum Otto engine (QOE) can be implemented using a single ion and an always-on thermal environment. The internal degree of freedom of the ion is chosen as the working fluid, while the motional degree of freedom can be used as the cold bath. We show, that by adiabatically changing the local magnetic field, the work efficiency can be asymptotically made unity. We propose a projective measurement of the internal state of the ion that mimics the release of heat into the cold bath during the engine cycle. In our proposal, the coupling to the hot and the cold baths need not be…
We investigate the quantum thermodynamic cycle of a quantum heat engine carrying out an Otto thermodynamic cycle. We use the thermal properties of a moving heat bath with relativistic velocity with respect to the cold bath. As a working medium, we use a two-level system and a harmonic oscillator that interact with a moving heat bath and a static cold bath. In the current work, the quantum heat engine is studied in the high and low temperatures regime. Using quantum thermodynamics and the theory of open quantum system we obtain the total produced work, the efficiency and the efficiency at maxim…
We use fast periodic control to realize finite-time Otto cycles exhibiting quantum advantage. Such periodic modulation of the working medium - bath interaction Hamiltonian during the thermalization strokes can give rise to non-Markovian anti-Zeno dynamics, and corresponding reduction in the thermalization times. Faster thermalization can in turn significantly enhance the power output in engines, or equivalently, the rate of refrigeration in refrigerators. This improvement in performance of dynamically controlled Otto thermal machines arises due to the time-energy uncertainty relation of quantu…
We analyze the performance of a quantum Otto cycle, employing time-dependent harmonic oscillator as the working fluid undergoing sudden expansion and compression strokes during the adiabatic stages, coupled to a squeezed reservoir. First, we show that the maximum efficiency that our engine can achieve is 1/2 only, which is in contrast with the earlier studies claiming unit efficiency under the effect of squeezed reservoir. Then, we obtain analytic expressions for the upper bound on the efficiency as well as on the coefficient of performance of the Otto cycle. The obtained bounds are independen…
The stochastic efficiency [G. Verley et al., Nat. Commun. 5, 4721 (2014)] was introduced to evaluate the performance of energy-conversion machines in micro-scale. However, such an efficiency generally diverges when no heat is absorbed while work is produced in a thermodynamic cycle. As a result, any statistical moments of the efficiency do not exist. In this study, we come up with a different version of the definition for the stochastic efficiency which is always finite. Its mean value is equal to the conventional efficiency, and higher moments characterize the fluctuations of the cycle. In ad…
The working substance fueling a quantum heat engine may contain coherence in its energy basis, depending on the dynamics of the engine cycle. In some models of quantum Otto heat engines, energy coherence has been associated with entropy production and quantum friction. We considered a quantum Otto heat engine operating at finite time. Coherence is generated and the working substance does not reach thermal equilibrium after interacting with the hot heat reservoir, leaving the working substance in a state with residual energy coherence. We observe an interference-like effect between the residual…
Conducting an open quantum system towards a desired steady state through reservoir engineering is a remarkable task that takes dissipation and decoherence as tools rather than impediments. Here we develop a collisional model to implement reservoir engineering for the one-dimensional harmonic motion of a trapped ion. Our scheme is based on the pulsed interaction between the vibrational mode and the electronic levels of a trapped ion, which is promoted by resolved-sideband lasers. Having multiple internal levels, we show that multiple reservoirs can be engineered, allowing for more efficient syn…
