Despite its idealizations, thermodynamics has proven its power as a predictive theory for practical applications. In particular, the Curzon-Ahlborn efficiency provides a benchmark for any real engine operating at maximal power. Here we further develop the analysis of endoreversible Otto engines. For a generic class of working mediums, whose internal energy is proportional to some power of the temperature, we find that no engine can achieve the Carnot efficiency at finite power. However, we also find that for the specific example of photonic engines the efficiency at maximal power is larger than the Curzon-Ahlborn efficiency.
Graphene is perhaps the most prominent "Dirac material," a class of systems whose electronic structure gives rise to charge carriers that behave as relativistic fermions. In multilayer graphene several crystal sheets are stacked such that the honeycomb lattice of each layer is displaced along one of the lattice edges. When subject to an external magnetic field, the scaling of the multilayer energy spectrum with the magnetic field, and thus the system's thermodynamic behavior, depends strongly on the number of layers. With this in mind, we examine the performance of a finite-time endoreversible…
Recent experimental breakthroughs produced the first nano heat engines that have the potential to harness quantum resources. An instrumental question is how their performance measures up against the efficiency of classical engines. For single ion engines undergoing quantum Otto cycles it has been found that the efficiency at maximal power is given by the Curzon-Ahlborn efficiency. This is rather remarkable as the Curzon-Alhbron efficiency was originally derived for endoreversible Carnot cycles. Here, we analyze two examples of endoreversible Otto engines within the same conceptual framework as…
Low-dissipation model and the endoreversible model of heat engines are two of the most commonly studied models of machines in finite-time thermodynamics. In this paper, we compare the performance characteristics of these two models under optimal power output. We point out a basic equivalence between them, in the linear response regime.
We study the optimal performance of an endoreversible quantum dot heat engine, in which the heat transfer between the system and baths is mediated by qubits, operating under the conditions of a trade-off objective function known as maximum efficient power function defined by the product of power and efficiency of the engine. First, we numerically study the optimization of the efficient power function for the engine under consideration. Then, we obtain some analytic results by applying hightemperature limit and compare the performance of the engine at maximum efficient power functionto the engi…
Quantum heat engines are subjected to quantum fluctuations related to their discrete energy spectra. Such fluctuations question the reliable operation of quantum engines in the microscopic realm. We here realize an endoreversible quantum Otto cycle in the large quasi-spin states of Cesium impurities immersed in an ultracold Rubidium bath. Endoreversible machines are internally reversible and irreversible losses only occur via thermal contact. We employ quantum control over both machine and bath to suppress internal dissipation and regulate the direction of heat transfer that occurs via inelast…
We present a study of the performance of endoreversible thermal machines optimized with respect to the thermodynamic force associated with the cold bath in the regime of small thermodynamic forces. These thermal machines can work either as an engine or as a refrigerator. We analyze how the optimal performances are determined by the dependence of the thermodynamic flux on the forces. The results are motivated and illustrated with a quantum model, the three level maser, and explicit analytical expressions of the engine efficiency as a function of the system parameters are given.
We derive the general probability distribution function of stochastic work for quantum Otto engines in which both the isochoric and driving processes are irreversible due to finite time duration. The time-dependent power fluctuations, average power, and thermodynamic efficiency are explicitly obtained for a complete cycle operating with an analytically solvable two-level system. We show that, there is a trade-off between efficiency (or power) and power fluctuations.
The derivation of general performance benchmarks is important in the design of highly optimized heat engines and refrigerators. To obtain them, one may model phenomenologically the leading sources of irreversibility ending up with results which are model-independent, but limited in scope. Alternatively, one can take a simple physical system realizing a thermodynamic cycle and assess its optimal operation from a complete microscopic description. We follow this approach in order to derive the coefficient of performance at maximum cooling rate for \textit{any} endoreversible quantum refrigerator.…
We present the spin quantum Otto machine under different optimization criterion when function either as a heat engine or a refrigerator. We examine the optimal performance of the heat engine and refrigerator depending on their efficiency, output power and maximum entropy production. For heat engine case, we obtain the expression for the upper and lower bounds efficiencies at maximum power and maximum ecological function. In addition, the spin quantum Otto refrigerator coefficient of performance is optimized for three different criterion -- cooling power, product of performance and power and ec…
The second law of thermodynamics constrains that the efficiency of heat engines, classical or quantum, cannot be greater than the universal Carnot efficiency. We discover another bound for the efficiency of a quantum Otto heat engine consisting of a harmonic oscillator. Dynamics of the engine is governed by the Lindblad equation for the density matrix, which is mapped to the Fokker-Planck equation for the quasi-probability distribution. Applying stochastic thermodynamics to the Fokker-Planck equation system, we obtain the $\hbar$-dependent quantum mechanical bound for the efficiency. It turns …
We formulate an endoreversible finite-time Carnot cycle model based on the assumptions of local equilibrium and constant energy flux, where the efficiency and the power are expressed in terms of the thermodynamic variables of the working substance. By analyzing the entropy production rate caused by the heat transfer in each isothermal process during the cycle, and using an endoreversible condition applied to the linear response regime, we identify the thermodynamic flux and force of the present system and obtain a linear relation that connects them. We calculate the efficiency at maximum power…
We consider the efficiency at maximum power of a quantum Otto engine, which uses a spin or a harmonic system as its working substance and works between two heat reservoirs at constant temperatures $T_h$ and $T_c$ $ (<T_h)$. Although the spin-$1/2$ system behaves quite differently from the harmonic system in that they obey two typical quantum statistics, the efficiencies at maximum power based on these two different kinds of quantum systems are bounded from the upper side by the same expression of the efficiency at maximum power: $η_{mp}\leqη_+\equiv η_C^2/[η_C-(1-η_C)\ln(1-η_C)]$, with $η_C=1-…
We study the ratio between the variances of work output and heat input, $η^{(2)}$, for a class of four-stroke heat engines which covers various typical cycles. Recent studies on the upper and lower bounds of $η^{(2)}$ are based on the quasistatic limit and the linear response regime, respectively. We extend these relations to the finite-time regime within the endoreversible approximation. We consider the ratio $η_{\text{MP}}^{(2)}$ at maximum power and find that the square of the Curzon-Ahlborn efficiency, $η_{\text{CA}}^2$, gives a good estimate of $η_{\text{MP}}^{(2)}$ for the class of heat …
We investigate stochastic thermodynamics of a two-particles Langevin system. Each particle is in contact with a heat bath at different temperatures $T_1$ and $T_2~(<T_1)$, respectively. Particles are trapped by a harmonic potential and driven by a linear external force. The system can act as an autonomous heat engine performing work against the external driving force. Linearity of the system enables us to examine thermodynamic properties of the engine analytically. We find that the efficiency of the engine at maximum power $η_{MP}$ is given by $η_{MP} = 1-\sqrt{T_2/T_1}$. This universal form h…
We derive the probability distribution of the efficiency of a quantum Otto engine. We explicitly compute the quantum efficiency statistics for an analytically solvable two-level engine. We analyze the occurrence of values of the stochastic efficiency above unity, in particular at infinity, in the nonadiabatic regime and further determine mean and variance in the case of adiabatic driving. We finally investigate the classical-to-quantum transition as the temperature is lowered.
We investigate quantum Otto engine and refrigeration cycles of a time-dependent harmonic oscillator operating under the conditions of maximum $Ω$-function, a trade-off objective function which represents a compromise between energy benefits and losses for a specific job, for both adiabatic and nonadiabatic (sudden) frequency modulations. We derive analytical expressions for the efficiency and coefficient of performance of the Otto cycle. For the case of adiabatic driving, we point out that in the low-temperature regime, the harmonic Otto engine (refrigerator) can be mapped to Feynman's ratchet…
We propose a quantum Otto cycle based on the properties of a two-level system in a realistic out-of-thermal-equilibrium electromagnetic field acting as its sole reservoir. This steady configuration is produced without the need of active control over the state of the environment, which is a non-coherent thermal radiation, sustained only by external heat supplied to macroscopic objects. Remarkably, even for non-ideal finite-time transformations, it largely over-performs the standard ideal Otto cycle, and asymptotically achieves unit efficiency at finite power.
We consider a finite-time Otto engine operating on a quantum harmonic oscillator and driven by shortcut-to-adiabaticity (STA) techniques to speed up its cycle. We study its efficiency and power when internal friction, time-averaged work, and work fluctuations are used as quantitative figures of merit, showing that time-averaged efficiency and power are useful cost functions for the characterization of the performance of the engine. We then use the minimum allowed time for validity of STA protocol relation to establish a physically relevant bound to the efficiency at maximum power of the STA-dr…
We investigate a heat engine with a finite length Kitaev chain in an Otto cycle. Finite size effects are taken into account using method of Hill's nano-thermodynamics as well as using the method of temperature dependent energy levels. We distinguish the bulk and boundary contributions to the efficiency and the work output of Kitaev chain engine and identify them as non-Otto heat engine and refrigerator cycles, respectively. Possibility of separately running Otto engine cycles associated with the bulk and the whole system, and an Otto refrigerator at the boundary is pointed out. It is found tha…
We study two-mode bosonic engines undergoing an Otto cycle. The energy exchange between the two bosonic systems is provided by a tunable unitary bilinear interaction in the mode operators modeling frequency conversion, whereas the cyclic operation is guaranteed by relaxation to two baths at different temperature after each interacting stage. By means of a two-point-measurement approach we provide the joint probability of the stochastic work and heat. We derive exact expressions for work and heat fluctuations, identities showing the interdependence among average extracted work, fluctuations and…
We consider the optimization of the work output and fluctuations of a finite-time quantum Otto heat engine cycle consisting of compression and expansion work strokes of unequal duration. The asymmetry of the cycle is characterized by a parameter $r_u$ giving the ratio of the times for the compression and expansion work strokes. For such an asymmetric quantum Otto engine cycle, with working substance chosen as a harmonic oscillator or a two-level system, we find that the optimal values of $r_u$ maximising the work output and the reliability (defined as the ratio of average work output to its st…
In finite-time quantum heat engines, some work is consumed to drive a working fluid accompanying coherence, which is called `friction'. To understand the role of friction in quantum thermodynamics, we present a couple of finite-time quantum Otto cycles with two different baths: Agarwal versus Lindbladian. We solve them exactly and compare the performance of the Agarwal engine with that of the Lindbladian engine. In particular, we find remarkable and counterintuitive results that the performance of the Agarwal engine due to friction can be much higher than that in the quasistatic limit with the…
The quantum heat engines have drawn much attention due to miniaturization of devices recently. We study the dynamics of the quantum Otto heat engine using the driven-dissipative Schrödinger equation. Starting from different initial states, we simulate the time evolutions of the internal energy, power and heat-work conversion efficiency. The initial state impacts on these thermodynamic quantities before the Otto cycle reaches stable. In the transition period, the efficiency and power may be higher or lower than the corresponding values in the cyclostationary state. Remarkably, the efficiency co…
In this paper, we study the role and relevance of the cost for an invariant-based shortcut to adiabaticity enabled qubit heat engine operates in a quantum Otto cycle. We consider a qubit heat engine with Landau-Zener Hamiltonian and improve its performance using the Lewis-Riesenfeld invariant-based shortcut to adiabaticity method. Addressing the importance of cost for better performance, the paper explores its relationship with the work and efficiency of the heat engine. We analyze the cost variation with the time duration of non-adiabatic unitary processes involved in the heat engine cycle. T…
The performance of endoreversible thermal machines operating at finite power constitutes one of the main challenges of nonequilibrium classical and quantum thermodynamics, engineering and others. We introduce the idea of adjusting the interaction time asymmetry in order to optimize the engine performance. We consider one of the simplest thermal machines, composed of a quantum dot interacting sequentially with two different reservoirs of heat and particles. Distinct optimization protocols are analyzed in the framework of stochastic thermodynamics. Results reveal that asymmetric interaction time…
We investigate a quantum heat engine with a working substance of two particles, one with a spin $1/2$ and the other with an arbitrary spin (spin $s$), coupled by Heisenberg exchange interaction, and subject to an external magnetic field. The engine operates in a quantum Otto cycle. Work harvested in the cycle and its efficiency are calculated using quantum thermodynamical definitions. It is found that the engine has higher efficiencies at higher spins and can harvest work at higher exchange interaction strengths. The role of exchange coupling and spin $s$ on the work output and the thermal eff…
In this paper, we analyze the total work extracted and the efficiency of the magnetic Otto cycle in its classic and quantum versions. As a general result, we found that the work and efficiency of the classical engine is always greater than or equal to that of its quantum counterpart independent of the working substance. In the classical case, this is due to the fact that the working substance is always in thermodynamic equilibrium at each point of the cycle, maximizing the energy extracted in the adiabatic paths. We apply this analysis to the case of a two-level system, finding that the work a…
We investigate a heat engine with a finite-length Kitaev chain in an ideal Otto cycle. It is found that the critical point of the topological phase transition coincides with the maxima of the efficiency and work output of the total Otto engine. Finite-size effects are taken into account using the method of Hill's nanothermodynamics, as well as using the method of temperature-dependent energy levels. We identify the bulk and boundary thermal cycles of the Kitaev chain engine and find that they are non-ideal Otto cycles. The physics of deviation from ideal Otto cycle is identified as a finite si…
We propose a quantum Otto cycle in a two spin-$1/2$ anisotropic XY model in a transverse external magnetic field. We first characterize the parameter regime that the working medium operates as an engine in the adiabatic regime. Then, we consider finite-time behavior of the engine with and without utilizing a shortcut to adiabaticity (STA) technique. STA schemes guarantee that the dynamics of a system follows the adiabatic path, at the expense of introducing an external control. We compare the performance of the non-adiabatic and STA engines for a fixed adiabatic efficiency but different parame…
For finite-time quantum Otto heat engine with working fluid consisting of either a (i) qubit or (ii) a harmonic oscillator, we show that the relative fluctuation of output work is always greater than the corresponding relative fluctuation of input heat absorbed from the hot bath. As a result, the ratio between the work fluctuation and the input heat fluctuation receives a lower bound in terms of the square value of the average efficiency of the engine. The saturation of the lower bound is received in the quasi-static limit of the engine and can be shown for a class of working fluids that follo…
Quantum heat engine with ideal gas has been well studied, yet the role of interaction was seldom explored. We construct a quantum Otto heat engine with N repulsive Bosonic particles in a 1D hard wall box. With the advantage of exact solution using Bethe Ansatz, we obtain not only the exact numerical result of efficiency in all interacting strength c, but also analytical results for strong interaction. We find the efficiency ηrecovers to the one of non-interacting case $η_{\mathrm{non}}=1-(L_{1}/L_{2})^{2}$ for strong interaction with asympotic behavior $η\simη_{\mathrm{non}}-4(N-1)L_{1}\left(L…
We study a driven harmonic oscillator operating an Otto cycle between two thermal baths of finite size. By making extensive use of the tools of Gaussian quantum mechanics, we directly simulate the dynamics of the engine as a whole, without the need to make any approximations. This allows us to understand the non-equilibrium thermodynamics of the engine not only from the perspective of the working medium, but also as it is seen from the thermal baths' standpoint. For sufficiently large baths, our engine is capable of running a number of ideal cycles, delivering finite power while operating very…
To optimize the performance of a heat engine in finite-time cycle, it is important to understand the finite-time effect of thermodynamic processes. Previously, we have shown that extra work is needed to complete a quantum adiabatic process in finite time, and proved that the extra work follows a \mathcal{C}/τ^{2} scaling for long control time τ. There the oscillating part of the extra work is neglected due to the complex energy-level structure of the particular quantum system. However, such oscillation of the extra work can not be neglected in some quantum systems with simple energy-level stru…
In order to establish better performance compromises between the process functionals of a heat engine, in the context of finite time thermodynamics (FTT), we propose some generalizations for the well known Efficient Power function through certain variables called <<Generalization Parameters>>. These generalization proposals show advantages in the characterization of operation modes for an endoreversible heat engine model. In particular, with introduce the k-Efficient Power regime. For this objective function we find the performance of the operation of some power plants through the parameter k.…
It is investigated whether non-Markovianity, i.e., the memory effects resulting from the coupling of the system to its environment, can be beneficial for the performance of quantum heat engines. Specifically, two physical models are considered. The first one is a well known single-qubit Otto engine; the non-Markovian behaviour is there implemented by replacing standard thermalization strokes with so-called extremal thermal operations which cannot be realized without the memory effects. The second one is a three-stroke engine in which the cycle consists of two extremal thermal operations and a …
Quantum thermal machines make use of non-classical thermodynamic resources, one of which is interactions between elements of the quantum working medium. In this paper, we examine the performance of a quasi-static quantum Otto engine based on two spins of arbitrary magnitudes subject to an external magnetic field and coupled via an isotropic Heisenberg exchange interaction. It has been earlier shown that the said interaction provides an enhancement of cycle efficiency for two spin-1/2 particles, with an upper bound which is tighter than the Carnot efficiency. However, the necessary conditions g…
