A Hybrid Model-based and Data-driven Approach to Spectrum Sharing in mmWave Cellular Networks
School of Electrical Engineering and Computer Science, KTH Royal Institute of Technology（瑞典皇家理工学院电气工程与计算机科学学院）；COMELEC Department, Telecom ParisTech（巴黎高科电信学院COMELEC系）
Hossein S. Ghadikolaei, Hadi Ghauch, Gabor Fodor, Mikael Skoglund, Carlo Fischione
Inter-operator spectrum sharing in millimeter-wave bands has the potential of substantially increasing the spectrum utilization and providing a larger bandwidth to individual user equipment at the expense of increasing inter-operator interference. Unfortunately, traditional model-based spectrum sharing schemes make idealistic assumptions about inter-operator coordination mechanisms in terms of latency and protocol overhead, while being sensitive to missing channel state information. In this paper, we propose hybrid model-based and data-driven multi-operator spectrum sharing mechanisms, which incorporate model-based beamforming and user association complemented by data-driven model refinements. Our solution has the same computational complexity as a model-based approach but has the major advantage of having substantially less signaling overhead. We discuss how limited channel state information and quantized codebook-based beamforming affect the learning and the spectrum sharing performance. We show that the proposed hybrid sharing scheme significantly improves spectrum utilization under realistic assumptions on inter-operator coordination and channel state information acquisition.
Communication at mmWave frequencies is one of the major innovations of the fifth generation of cellular networks, because of the potential multi-gigabit data rate given by the large amounts of available bandwidth. The mmWave channel, however, makes reliable communications particularly challenging, given the harsh propagation environment and the sensitivity to blockage. Therefore, proper modeling of the mmWave channel is fundamental for accurate results in system simulations of mmWave cellular networks. Nonetheless, complex models, such as the 3GPP channel model for frequencies above 6 GHz, may…
Regulators all around the world have started identifying the portions of the spectrum that will be used for the next generation of cellular networks. A band in the mmWave spectrum will be exploited to increase the available capacity. In response to the very high expected traffic demand, a sharing mechanism may make it possible to use the spectrum more efficiently. In this work, moving within the European and Italian regulatory conditions, we propose the use of Licensed Spectrum Access (LSA) to coordinate sharing among cellular operators. Additionally, we show some preliminary results on our re…
The next generation of cellular networks (5G) will exploit the mmWave spectrum to increase the available capacity. Communication at such high frequencies, however, suffers from high path loss and blockage, therefore directional transmissions using antenna arrays and dense deployments are needed. Thus, when evaluating the performance of mmWave mobile networks, it is necessary to accurately model the complex channel, the directionality of the transmission, but also the interplay that these elements can have with the whole protocol stack, both in the radio access and in the higher layers. In this…
Large antenna arrays and millimeter-wave (mmWave) frequencies have been attracting growing attention as possible candidates to meet the high requirements of future 5G mobile networks. In view of the large path loss attenuation in these bands, beamforming techniques that create a beam in the direction of the user equipment are essential to perform the transmission. For this purpose, in this paper, we aim at characterizing realistic antenna radiation patterns, motivated by the need to properly capture mmWave propagation behaviors and understand the achievable performance in 5G cellular scenarios…
In this paper, the outage performance of relay-assisted millimeter wave (mmWave) cellular systems employing joint spatial division and multiplexing (JSDM) is investigated. It is assumed that the macro base station (BS) equipped with a large number of antennas serves the single antenna pico BS (as a relay) and users simultaneously, and that the pico BS is located at the edge of the macro cell. Theoretical analysis of the signal-to-interference-plus-noise ratio (SINR) outage probability of each user is first obtained. The cell SINR outage probability is then derived. Under the noise-limited assu…
TCP is the most widely used transport protocol in the internet. However, it offers suboptimal performance when operating over high bandwidth mmWave links. The main issues introduced by communications at such high frequencies are (i) the sensitivity to blockage and (ii) the high bandwidth fluctuations due to Line of Sight (LOS) to Non Line of Sight (NLOS) transitions and vice versa. In particular, TCP has an abstract view of the end-to-end connection, which does not properly capture the dynamics of the wireless mmWave link. The consequence is a suboptimal utilization of the available resources.…
In this paper, an analytical framework is provided to analyze the uplink performance of device-to-device (D2D)-enabled millimeter wave (mmWave) cellular networks with clustered D2D user equipments (UEs). Locations of cellular UEs are modeled as a Poison Point Process (PPP), while locations of potential D2D UEs are modeled as a Poisson Cluster Process (PCP). Signal-to-interference-plus-noise ratio (SINR) outage probabilities are derived for both cellular and D2D links using tools from stochastic geometry. The distinguishing features of mmWave communications such as directional beamforming and h…
In mmWave networks, a large or nearby object can obstruct multiple communication links, which results in spatial correlation in the blocking probability between a user and two or more base stations (BSs). This paper characterizes this blocking correlation and derives its impact on the signal-to-interference-plus-noise ratio (SINR) of a mmWave cellular network. We first present an exact analysis of a 1D network and highlight the impact of blocking correlation in the derived expressions. Gaining insights from the 1D analysis, we develop an analytical framework for a 2D network where we character…
We study how dense multi-antenna millimeter wave (mmWave) cellular network performance scales in terms of the base station (BS) spatial density $λ$, by studying the signal-to-interference-plus-noise ratio (SINR) and the area spectral efficiency (ASE). If the number of antennas at each BS scales at least linearly with $λ$, which increases the number of possible beam configurations and their main-lobe gain, and decreases their side-lobe gain, we prove that the SINR approaches a finite random variable that is independent of $λ$ and the ASE scales at least linearly with $λ$. In contrast, if the nu…
Cellular networks equipped with mobile edge computing (MEC) servers can be beneficial for unmanned aerial vehicles (UAVs) with limited onboard computation power and battery life-time. In this paper, we compare energy consumption of a UAV connected to cellular MEC servers in various possible scenarios such as onboard/MEC processing or parallel computation. Using detailed 3GPP-based modelings, we provide quantitative understanding of the most energy efficient approach and its relation with communication technologies, computation factors, and mobility parameters. Our findings show that, across th…
In this paper, the outage performance of a two-tier heterogeneous mmWave cellular networks employing joint spatial division and multiplexing (JSDM) is investigated. It is assumed that macro base stations (BSs) equipped with a large number of antennas and pico BSs equipped with single antenna serve users simultaneously. The two-tier BSs and users are distributed according to independent Poisson point processes (PPPs). Theoretical analysis of the signal-to-interference-plus-noise ratio (SINR) outage probability of the typical user is first provided. The all SINR outage probability of the two tie…
Deploying Sub-6GHz networks together with millimeter wave (mmWave) is a promising solution to achieve high data rates in traffic hotspots while guaranteeing sufficient coverage, where mmWave small cells are densely deployed to provide high quality of service. In this paper, we propose an analytical framework to investigate the integrated Sub-6GHz-mmWave cellular networks, in which the Sub-6GHz base stations (BSs) are modeled as a Poisson point process, and the mmWave BSs are clustered following a Poisson cluster process in traffic hotspots. We conduct stochastic geometry-based analysis and der…
In this paper, we first introduce a generalized modeling and analysis framework to explore the fundamental interactions between user association, coverage probability and link rate in a millimeter wave (mmWave) heterogeneous cellular network (HetNet) in which there are multiple tiers of the ultra-high-frequency (UHF) macrocell and small cell base stations (BSs) and a single tier of mmWave small cell BSs. A generalized user association scheme that can cover many path-loss-based user association schemes is proposed and its related probabilistic properties that facilitate the derivations of the c…
Wireless indoor coverage and data capacity are important aspects of cellular networks. With the ever-increasing data traffic, demand for more data capacity indoors is also growing. The lower frequencies of the legacy frequency bands of macro outdoor cells manage to provide coverage inside buildings, however, new frequencies foreseen for the 5th generation (5G) of mobile communications in the millimeter wave (mmWave) spectrum penetrate very poorly into buildings. Therefore, a massive densification of the network would require to deploy a large number of indoor small cells, which would lead to h…
The opening of the millimeter wave (mmWave) spectrum bands for 5G communications has motivated the need for novel spectrum sharing solutions at these high frequencies. In fact, reconfigurable intelligent surfaces (RISs) have recently emerged to enable spectrum sharing while enhancing the incumbents' quality-of-service (QoS). Nonetheless, co-existence over mmWave bands remains persistently challenging due to their unfavorable propagation characteristics. Hence, initiating mmWave spectrum sharing requires the RIS to further assist in improving the QoS over mmWave bands without jeopardizing spect…
Due to the greater path loss, shadowing, and increased effect of blockage in millimeter wave cellular networks, base station sharing among network service providers has the potential to significantly improve overall network capacity. However, a service provider may find that despite the technical gains, sharing actually reduces its profits because it makes price competition between service providers tougher. In this work, a weighted scheduling algorithm is described, which gives greater control over how the airtime resource is allocated within a shared cell. It is shown that, under certain mar…
Based on the distinguishing features of multi-tier millimeter wave (mmWave) networks such as different transmit powers, different directivity gains from directional beamforming alignment and path loss laws for line-of-sight (LOS) and non-line-of-sight (NLOS) links, we introduce a normalization model to simplify the analysis of multi-tier mmWave cellular networks. The highlight of the model is that we convert a multi-tier mmWave cellular network into a single-tier mmWave network, where all the base stations (BSs) have the same normalized transmit power 1 and the densities of BSs scaled by LOS o…
At millimeter wave (mmWave) frequencies, signals are prone to blocking by objects in the environment, which causes paths to go from line-of-sight (LOS) to non-LOS (NLOS). We consider macrodiversity as a strategy to improve the performance of mmWave cellular systems, where the user attempts to connect with two or more base stations. An accurate analysis of macrodiversity must account for the possibility of correlated blocking, which occurs when a single blockage simultaneously blocks the paths to two base stations. In this paper, we analyze the macrodiverity gain in the presence of correlated r…
In this work, we present a framework analysis of millimeter waves (mmWaves) vehicular communications systems. Communications between vehicles take place through a cooperative relay which acts as an intermediary base station (BS). The relay is equipped with multiple transmit and receive antennas and it employs decode-and-forward (DF) to process the signal. Also, the relay applies maximal ratio combining (MRC), and maximal ratio transmission (MRT), respectively, to receive and forward the signal. As the vehicles' speeds are relatively high, the channel experiences a fast fading and this time var…
Millimeter-wave (mmWave) bands will play an important role in 5G wireless systems. The system performance can be assessed by using models from stochastic geometry that cater for the directivity in the desired signal transmissions as well as the interference, and by calculating the signal-to-interference-plus-noise ratio (SINR) coverage. Nonetheless, the correctness of the existing coverage expressions derived through stochastic geometry may be questioned, as it is not clear whether they capture the impact of the detailed mmWave channel and antenna features. In this study, we propose an SINR co…
The highly directional beams applied in millimeter wave (mmWave) cellular networks make it possible to achieve near interference-free (NIF) transmission under judiciously designed space-time user scheduling, where the power of intra-/inter-cell interference between any two users is below a predefined threshold. In this paper, we investigate two aspects of the NIF space-time user scheduling in a multi-cell mmWave network with multi-RF-chain base stations. Firstly, given that each user has a requirement on the number of space-time resource elements, we study the NIF user scheduling problem to mi…
Outdoor-to-indoor communications in millimeter-wave (mmWave) cellular networks have been one challenging research problem due to the severe attenuation and the high penetration loss caused by the propagation characteristics of mmWave signals. We propose a viable solution to implement the outdoor-to-indoor mmWave communication system with the aid of an active intelligent transmitting surface (active-ITS), where the active-ITS allows the incoming signal from an outdoor base station (BS) to pass through the surface and be received by the indoor user-equipments (UEs) after shifting its phase and m…
Hybrid analog and digital BeamForming (HBF) is one of the enabling transceiver technologies for millimeter Wave (mmWave) Multiple Input Multiple Output (MIMO) systems. This technology offers highly directional communication, which is able to confront the intrinsic characteristics of mmWave signal propagation. However, the small coherence time in mmWave systems, especially under mobility conditions, renders efficient Beam Management (BM) in standalone mmWave communication a very difficult task. In this paper, we consider HBF transceivers with planar antenna panels and design a multi-level beam …
A K-tier heterogeneous mmWave uplink cellular network with clustered user equipments (UEs) is considered in this paper. In particular, UEs are assumed to be clustered around small-cell base stations (BSs) according to a Gaussian distribution, leading to the Thomas cluster process based modeling. Specific and practical line-of-sight (LOS) and non-line-of-sight (NLOS) models are adopted with different parameters for different tiers. The probability density functions (PDFs) and complementary cumulative distribution functions (CCDFs) of different distances from UEs to BSs are characterized. Couple…
The next generation of multimedia applications will require the telecommunication networks to support a higher bitrate than today, in order to deliver virtual reality and ultra-high quality video content to the users. Most of the video content will be accessed from mobile devices, prompting the provision of very high data rates by next generation (5G) cellular networks. A possible enabler in this regard is communication at mmWave frequencies, given the vast amount of available spectrum that can be allocated to mobile users; however, the harsh propagation environment at such high frequencies ma…
Unmanned aerial vehicles (UAVs) have brought a lot of flexibility in the network deployment. However, UAVs suffer from the high mobility and instability. To improve the capacity and reliability of the UAV networks, millimeter-wave (mmWave) and reconfigurable intelligent surfaces (RISs) can be used in the system. In this paper, we consider an RIS-assisted mmWave UAV wireless cellular network, where UAVs serve several users with the help of multiple RISs. We jointly optimize the deployment, user scheduling, beamforming vector, and RIS phases to maximize the sum-rate, with the constraints of the …
In this paper we examine the use of matching theory for user association in millimeter wave (mmWave)-enabled cellular heterogeneous networks (HetNets). In a mmWave system, the channel variations can be fast and unpredictable, rendering centralized user association potentially inefficient. We propose an efficient distributed matching algorithm, called early acceptance (EA), tailored for user association in 5G HetNets. The effectiveness of the proposed algorithm is assessed by comparing its performance with the well-known deferred acceptance (DA) matching algorithm, in which user association is …
