A K-tier heterogeneous mmWave uplink cellular network with clustered user equipments (UEs) is considered in this paper. In particular, UEs are assumed to be clustered around small-cell base stations (BSs) according to a Gaussian distribution, leading to the Thomas cluster process based modeling. Specific and practical line-of-sight (LOS) and non-line-of-sight (NLOS) models are adopted with different parameters for different tiers. The probability density functions (PDFs) and complementary cumulative distribution functions (CCDFs) of different distances from UEs to BSs are characterized. Coupled association strategy and largest long-term averaged biased received power criterion are considered, and general expressions for association probabilities are provided. Following the identification of the association probabilities, the Laplace transforms of the inter-cell interference and the intra-cluster interference are characterized. Using tools from stochastic geometry, general expressions of the SINR coverage probability are provided. As extensions, fractional power control is incorporated into the analysis, tractable closed-form expressions are provided for special cases, and average ergodic spectral efficiency is analyzed. Via numerical and simulation results, analytical characterizations are confirmed and the impact of key system and network parameters on the performance is identified.
Millimeter-wave (mmWave) cell-free massive multi-user (MU) multiple-input multiple-output (MIMO) systems combine the large bandwidths available at mmWave frequencies with the improved coverage of cell-free systems. However, to combat the high path loss at mmWave frequencies, user equipments (UEs) must form beams in meaningful directions, i.e., to a nearby access point (AP). At the same time, multiple UEs should avoid transmitting to the same AP to reduce MU interference. We propose an interference-aware method for beam alignment (BA) in the cell-free mmWave massive MU-MIMO uplink. In the consi…
Location-aware communication systems are expected to play a pivotal part in the next generation of mobile communication networks. Therefore, there is a need to understand the localization limits in these networks, particularly, using millimeter-wave technology (mmWave). Towards that, we address the uplink and downlink localization limits in terms of 3D position and orientation error bounds for mmWave multipath channels. We also carry out a detailed analysis of the dependence of the bounds of different systems parameters. Our key findings indicate that the uplink and downlink behave differently…
In this paper, we provide an analytical framework to analyze the uplink performance of device-to-device (D2D)-enabled millimeter wave (mmWave) cellular networks. Signal-to- interference-plus-noise ratio (SINR) outage probabilities are derived for both cellular and D2D links using tools from stochastic geometry. The distinguishing features of mmWave communications such as directional beamforming and having different path loss laws for line-of-sight (LOS) and non-line-of-sight (NLOS) links are incorporated into the outage analysis by employing a flexible mode selection scheme and Nakagami fading…
Millimeter wave (mmWave) communication is expected to play an important role in next generation cellular networks, aiming to cope with the bandwidth shortage affecting conventional wireless carriers. Using side-information has been proposed as a potential approach to accelerate beam selection in mmWave massive MIMO (m-MIMO) communications. However, in practice, such information is not error-free, leading to performance degradation. In the multi-user case, a wrong beam choice might result in irreducible inter-user interference at the base station (BS) side. In this paper, we consider location-a…
The millimeter wave (mmWave) frequencies offer the potential of orders of magnitude increases in capacity for next-generation cellular systems. However, links in mmWave networks are susceptible to blockage and may suffer from rapid variations in quality. Connectivity to multiple cells - at mmWave and/or traditional frequencies - is considered essential for robust communication. One of the challenges in supporting multi-connectivity in mmWaves is the requirement for the network to track the direction of each link in addition to its power and timing. To address this challenge, we implement a nov…
In this paper, an analytical framework is provided to analyze the uplink performance of device-to-device (D2D)-enabled millimeter wave (mmWave) cellular networks with clustered D2D user equipments (UEs). Locations of cellular UEs are modeled as a Poison Point Process (PPP), while locations of potential D2D UEs are modeled as a Poisson Cluster Process (PCP). Signal-to-interference-plus-noise ratio (SINR) outage probabilities are derived for both cellular and D2D links using tools from stochastic geometry. The distinguishing features of mmWave communications such as directional beamforming and h…
Reliability and latency challenges in future mixed sub-6 GHz/millimeter wave (mmWave) fifth generation (5G) cell-free massive multiple-input multiple-output (MIMO) networks is to guarantee a fast radio resource management in both uplink (UL) and downlink (DL), while tackling the corresponding propagation imbalance that may arise in blockage situations. In this context, we introduce a semi-blind UL/DL decoupling concept where, after its initial activation, the central processing unit (CPU) gathers measurements of the Rician $K$-factor---reflecting the line-of-sight (LOS) condition of the user e…
In this paper, we study the energy efficiency (EE) maximization problem for an uplink millimeter wave massive multiple-input multiple-output system with non-orthogonal multiple access (NOMA). Multiple two-user clusters are formed according to their channel correlation and gain difference, and NOMA is applied within each cluster. Then, a hybrid analog-digital beamforming scheme is designed to lower the number of radio frequency chains at the base station (BS). On this basis, we formulate a power allocation (PA) problem to maximize the EE under users' quality of service requirements. An iterativ…
Hybrid analog and digital BeamForming (HBF) is one of the enabling transceiver technologies for millimeter Wave (mmWave) Multiple Input Multiple Output (MIMO) systems. This technology offers highly directional communication, which is able to confront the intrinsic characteristics of mmWave signal propagation. However, the small coherence time in mmWave systems, especially under mobility conditions, renders efficient Beam Management (BM) in standalone mmWave communication a very difficult task. In this paper, we consider HBF transceivers with planar antenna panels and design a multi-level beam …
The demand for higher data rates and the scarce spectrum resources drive the adoption of collaborative communication techniques. In this work we shown that the existing cluster based collaborative schemes can be greatly improved in terms of both the achievable performance, and complexity, by allowing overlapping across clusters. Further improvement is achieved by incorporating scheduling to the decoding process. Different variants of the improved schemes are considered and are shown to achieve near optimum performance for practical signal-to-noise ratios for the one- and two-dimensional (hexag…
In this paper, we investigate network-assisted full-duplex (NAFD) cell-free millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) systems with digital-to-analog converter (DAC) quantization and fronthaul compression. We propose to maximize the weighted uplink and downlink sum rate by jointly optimizing the power allocation of both the transmitting remote antenna units (T-RAUs) and uplink users and the variances of the downlink and uplink fronthaul compression noises. To deal with this challenging problem, we further apply a successive convex approximation (SCA) method to handl…
This paper proposes a cellular network exploiting millimeter-wave (mmWave) and ultra-densified base stations (BSs) to achieve the far-reaching 5G aim in downlink average rate. The mmWave overlaid network however incurs a pitfall that its ample data rate is only applicable for downlink transmissions due to the implementation difficulty at mobile users, leading to an immense difference between uplink and downlink rates. We therefore turn our attention not only to maximize downlink rate but also to ensure the minimum uplink rate. With this end, we firstly derive the mmWave overlaid ultra-dense ce…
In this paper, we investigate the energy-efficient resource allocation problem in an uplink non-orthogonal multiple access (NOMA) millimeter wave system, where the fully-connected-based sparse radio frequency chain antenna structure is applied at the base station (BS). To relieve the pilot overhead for channel estimation, we propose a codebook-based analog beam design scheme, which only requires to obtain the equivalent channel gain. On this basis, users belonging to the same analog beam are served via NOMA. Meanwhile, an advanced NOMA decoding scheme is proposed by exploiting the global infor…
Millimeter wave (mmWave) links will offer high capacity but are poor at penetrating into or diffracting around solid objects. Thus, we consider a hybrid cellular network with traditional sub 6 GHz macrocells coexisting with denser mmWave small cells, where a mobile user can connect to either opportunistically. We develop a general analytical model to characterize and derive the uplink and downlink cell association in view of the SINR and rate coverage probabilities in such a mixed deployment. We offer extensive validation of these analytical results (which rely on several simplifying assumptio…
Millimeter wave frequencies will likely be part of the fifth generation of mobile networks and of the 3GPP New Radio (NR) standard. MmWave communication indeed provides a very large bandwidth, thus an increased cell throughput, but how to exploit these resources at the higher layers is still an open research question. A very relevant issue is the high variability of the channel, caused by the blockage from obstacles and the human body. This affects the design of congestion control mechanisms at the transport layer, and state-of-the-art TCP schemes such as TCP CUBIC present suboptimal performan…
The use of mmWave frequencies is one of the key strategies to achieve the fascinating 1000x increase in the capacity of future 5G wireless systems. While for traditional sub-6 GHz cellular frequencies several well-developed statistical channel models are available for system simulation, similar tools are not available for mmWave frequencies, thus preventing a fair comparison of independently developed transmission and reception schemes. In this paper we provide a simple albeit accurate statistical procedure for the generation of a clustered MIMO channel model operating at mmWaves, for both the…
In order to overcome the anticipated tremendous growth in the volume of mobile data traffic, the next generation of cellular networks will need to exploit the large bandwidth offered by the millimeter-wave (mmWave) band. A key distinguishing characteristic of mmWave is its use of highly directional and steerable antennas. In addition, future networks will be highly densified through the proliferation of base stations and their supporting infrastructure. With the aim of further improving the overall throughput of the network by mitigating the effect of frequency-selective fading and co-channel …
Millimeter-wave (mmWave) communication and network densification hold great promise for achieving high-rate communication in next-generation wireless networks. Cloud radio access network (CRAN), in which low-complexity remote radio heads (RRHs) coordinated by a central unit (CU) are deployed to serve users in a distributed manner, is a cost-effective solution to achieve network densification. However, when operating over a large bandwidth in the mmWave frequencies, the digital fronthaul links in a CRAN would be easily saturated by the large amount of sampled and quantized signals to be transfe…
Xidian University（西安电子科技大学）；Science and Technology on Electronic Information Control Laboratory（电子信息控制重点实验室）；Memorial University（纪念大学）
In a time-varying massive multiple-input multipleoutput (MIMO) system, the acquisition of the downlink channel state information at the base station (BS) is a very challenging task due to the prohibitively high overheads associated with downlink training and uplink feedback. In this paper, we consider the hybrid precoding structure at BS and examine the antennatime domain channel extrapolation. We design a latent ordinary differential equation (ODE)-based network under the variational auto-encoder (VAE) framework to learn the mapping function from the partial uplink channels to the full downli…
We consider a single-cell scenario involving a single base station (BS) with a massive array serving multi-antenna terminals in the downlink of a mmWave channel. We present a class of multiuser user MIMO schemes, which rely on uplink training from the user terminals, and on uplink/downlink channel reciprocity. The BS employs virtual sector-based processing according to which, user-channel estimation and data transmission are performed in parallel over non-overlapping angular sectors. The uplink training schemes we consider are non-orthogonal, that is, we allow multiple users to transmit pilots…
For unmanned aerial vehicle (UAV) aided millimeter wave (mmWave) networks, we propose a unified three-dimensional (3D) spatial framework in this paper to model a general case that uncovered users send messages to base stations via UAVs. More specifically, the locations of transceivers in downlink and uplink are modeled through the Poisson point processes and Poisson cluster processes (PCPs), respectively. For PCPs, Matern cluster and Thomas cluster processes, are analyzed. Furthermore, both 3D blockage processes and 3D antenna patterns are introduced for appraising the effect of altitudes. Bas…
In this work, we propose a beam training codebook for Reconfigurable Intelligent Surface (RIS) assisted mmWave uplink communication. Beam training procedure is important to establish a reliable link between user node and Access point (AP). A codebook based training procedure reduces the search time to obtain best possible phase shift by RIS controller to align incident beam at RIS in the direction of receiving node. We consider a semi passive RIS to assist RIS controller with a feedback of minimum overhead. It is shown that the procedure detects a mobile node with high probability in a short i…
Deploying Sub-6GHz networks together with millimeter wave (mmWave) is a promising solution to achieve high data rates in traffic hotspots while guaranteeing sufficient coverage, where mmWave small cells are densely deployed to provide high quality of service. In this paper, we propose an analytical framework to investigate the integrated Sub-6GHz-mmWave cellular networks, in which the Sub-6GHz base stations (BSs) are modeled as a Poisson point process, and the mmWave BSs are clustered following a Poisson cluster process in traffic hotspots. We conduct stochastic geometry-based analysis and der…
In this paper, we investigate the combination of two key enabling technologies for the fifth generation (5G) wireless mobile communication, namely millimeter-wave (mmWave) communications and non-orthogonal multiple access (NOMA). In particular, we consider a typical 2-user uplink mmWave-NOMA system, where the base station (BS) equips an analog beamforming structure with a single RF chain and serves 2 NOMA users. An optimization problem is formulated to maximize the achievable sum rate of the 2 users while ensuring a minimal rate constraint for each user. The problem turns to be a joint power c…
In millimeter wave (mmWave) systems, we investigate uplink user scheduling when a basestation employs low-resolution analog-to-digital converters (ADCs) with a large number of antennas. To reduce power consumption in the receiver, low-resolution ADCs can be a potential solution for mmWave systems in which many antennas are likely to be deployed to compensate for the large path loss. Due to quantization error, we show that the channel structure in the beamspace, in addition to the channel magnitude and beamspace orthogonality, plays a key role in maximizing the achievable rates of scheduled use…
A K-tier heterogeneous downlink millimeter wave (mmWave) cellular network with user-centric small cell deployments is studied in this paper. In particular, we consider a heterogeneous network model with user equipments (UEs) being distributed according to a Poisson Cluster Process (PCP). Specifically, we address two cluster processes, namely (i) Thomas cluster process, where the UEs are clustered around the base stations (BSs) and the distances between UEs and the BS are modeled as Gaussian distributed, and (ii) Matern cluster process, where the UEs are scattered according to a uniform distrib…
At millimeter wave (mmWave) frequencies, signals are prone to blocking by objects in the environment, which causes paths to go from line-of-sight (LOS) to non-LOS (NLOS). We consider macrodiversity as a strategy to improve the performance of mmWave cellular systems, where the user attempts to connect with two or more base stations. An accurate analysis of macrodiversity must account for the possibility of correlated blocking, which occurs when a single blockage simultaneously blocks the paths to two base stations. In this paper, we analyze the macrodiverity gain in the presence of correlated r…
Using out-of-band (OOB) side-information has recently been shown to accelerate beam selection in single-user millimeter wave (mmWave) massive MIMO communications. In this paper, we propose a novel OOB-aided beam selection framework for a mmWave uplink multi-user system. In particular, we exploit spatial information extracted from lower (sub-6 GHz) bands in order to assist with an inter-user coordination scheme at mmWave bands. To enforce coordination, we propose an exchange protocol exploiting device-to-device communications, where low-rate beam-related information is exchanged between the mob…
The millimeter wave (mmWave) bands offer the possibility of orders of magnitude greater throughput for fifth generation (5G) cellular systems. However, since mmWave signals are highly susceptible to blockage, channel quality on any one mmWave link can be extremely intermittent. This paper implements a novel dual connectivity protocol that enables mobile user equipment (UE) devices to maintain physical layer connections to 4G and 5G cells simultaneously. A novel uplink control signaling system combined with a local coordinator enables rapid path switching in the event of failures on any one lin…
In this work, we propose a novel approach for high accuracy user localization by merging tools from both millimeter wave (mmWave) imaging and communications. The key idea of the proposed solution is to leverage mmWave imaging to construct a high-resolution 3D image of the line-of-sight (LOS) and non-line-of-sight (NLOS) objects in the environment at one antenna array. Then, uplink pilot signaling with the user is used to estimate the angle-of-arrival and time-of-arrival of the dominant channel paths. By projecting the AoA and ToA information on the 3D mmWave images of the environment, the prop…
Beijing Institute of Technology（北京理工大学）；CNRS（法国国家科学研究中心）；CentraleSupélec（中央理工-高等电力学院）；Université Paris-Saclay（巴黎-萨克雷大学）；King Abdullah University of Science and Technology（阿卜杜拉国王科技大学）
Integrating large intelligent reflecting surfaces (IRS) into millimeter-wave (mmWave) massive multi-input-multi-ouput (MIMO) has been a promising approach for improved coverage and throughput. Most existing work assumes the ideal channel estimation, which can be challenging due to the high-dimensional cascaded MIMO channels and passive reflecting elements. Therefore, this paper proposes a deep denoising neural network assisted compressive channel estimation for mmWave IRS systems to reduce the training overhead. Specifically, we first introduce a hybrid passive/active IRS architecture, where v…
Initial deployments of millimeter wave (mmWave) cellular networks are likely to be enabled with self-backhauling. In this work, we propose a random spatial model to analyze uplink (UL) and downlink (DL) SINR distribution and mean rates corresponding to different access-backhaul and UL-DL resource allocation schemes in a self-backhauled mmWave cellular network with Poisson point process (PPP) deployment of users and base stations. In particular, we focus on heuristic implementations of static and dynamic time division duplexing (TDD) for access links with synchronized or unsynchronized access-b…
This paper considers the problem of beam alignment in a cell-free massive MIMO deployment with multiple access points (APs) and multiple user equipments (UEs) simultaneously operating in the same millimeter wave frequency band. Assuming the availability of a control channel at sub-6 GHz frequencies, a protocol is developed that permits estimating, for each UE, the strongest propagation path from each of the surrounding APs, and to perform user-centric association between the UEs and the APs. Estimation of the strongest paths from nearby APs is realized at the UE in a one-phase procedure, durin…
Non-orthogonal multiple access (NOMA) and millimeter wave (mmWave) are two key enabling technologies for the fifth-generation (5G) mobile networks and beyond. In this paper, we consider uplink communications with a hybrid beamforming structure and focus on improving the spectral efficiency (SE) and energy efficiency (EE) of mmWave multiple-input multiple-output (MIMO)-NOMA systems with enhanced user grouping and power allocation. Exploiting the directionality feature of mmWave channels, we first propose a novel initial agglomerative nesting (AGNES) based user grouping algorithm by taking advan…
In this paper, we study the problem of physical layer security in the uplink of millimeter-wave massive multiple-input multiple-output (MIMO) networks and propose a jamming detection and suppression method. The proposed method is based on directional information of the received signals at the base station antenna array. The proposed jamming detection method can accurately detect both the existence and direction of the jammer using the received pilot signals in the training phase. The obtained information is then exploited to develop a channel estimator that excludes the jammer's angular subspa…
In this paper, we investigate the uplink transmission performance of low-power wide-area (LPWA) networks with regards to coexisting radio modules. We adopt long range (LoRa) radio technique as an example of the network of focus even though our analysis can be easily extended to other situations. We exploit a new topology to model the network, where the node locations of LoRa follow a Poisson cluster process (PCP) while other coexisting radio modules follow a Poisson point process (PPP). Unlike most of the performance analysis based on stochastic geometry, we take noise into consideration. More…
Full Duplex (FD) radio has emerged as a promising solution to increase the data rates by up to a factor of two via simultaneous transmission and reception in the same frequency band. This paper studies a novel hybrid beamforming (HYBF) design to maximize the weighted sum-rate (WSR) in a single-cell millimeter wave (mmWave) massive multiple-input-multiple-output (mMIMO) FD system. Motivated by practical considerations, we assume that the multi-antenna users and hybrid FD base station (BS) suffer from the limited dynamic range (LDR) noise due to non-ideal hardware and an impairment aware HYBF ap…
We propose an effective interference management and beamforming mechanism for uplink communication systems that yields fair allocation of rates. In particular, we consider a hotspot area of a millimeter-wave (mmWave) access network consisting of multiple user equipment (UE) in the uplink and multiple access points (APs) with directional antennas and adjustable beam widths and directions (beam configurations). This network suffers tremendously from multi-beam multi-user interference, and, to improve the uplink transmission performance, we propose a centralized scheme that optimizes the power, t…
Data aggregation is an effective solution to enable cellular support of Internet-of-things (IoT) communications. Indeed, it helps alleviate channel congestion, reduce the communication range, and extend battery-lifetime. In this paper, we use stochastic geometry to analyze the performance of uplink cellular IoT using different deployment strategies of aggregators, including terrestrial and aerial ones, e.g., drones or unmanned aerial vehicles. We focus on IoT-specific performance metrics, that are typically used by 3GPP. Specifically, we derive closed-form expressions of the average transmit p…
Supporting high mobility in millimeter wave (mmWave) systems enables a wide range of important applications such as vehicular communications and wireless virtual/augmented reality. Realizing this in practice, though, requires overcoming several challenges. First, the use of narrow beams and the sensitivity of mmWave signals to blockage greatly impact the coverage and reliability of highly-mobile links. Second, highly-mobile users in dense mmWave deployments need to frequently hand-off between base stations (BSs), which is associated with critical control and latency overhead. Further, identify…
We introduce clustered millimeter wave networks with invoking non-orthogonal multiple access~(NOMA) techniques, where the NOMA users are modeled as Poisson cluster processes and each cluster contains a base station (BS) located at the center. To provide realistic directional beamforming, an actual antenna array pattern is deployed at all BSs. We propose three distance-dependent user selection strategies to appraise the path loss impact on the performance of our considered networks. With the aid of such strategies, we derive tractable analytical expressions for the coverage probability and syst…
The advent of Reconfigurable Intelligent Surfaces (RISs) in wireless communication networks unlocks the way to support high frequency radio access (e.g. in millimeter wave) while overcoming their sensitivity to the presence of deep fading and blockages. In support of this vision, this work exhibits the forward-looking perception of using RIS to enhance the connectivity of the communication links in edge computing scenarios, to support computation offloading services. We consider a multi-user MIMO system, and we formulate a long-term optimization problem aiming to ensure a bounded end-to-end de…
We investigate uplink user scheduling for millimeter wave (mmWave) hybrid analog/digital beamforming systems with low-resolution analog-to-digital converters (ADCs). Deriving new scheduling criteria for the mmWave systems, we show that the channel structure in the beamspace, in addition to the channel magnitude and orthogonality, plays a key role in maximizing the achievable rates of scheduled users due to quantization error. The criteria show that to maximize the achievable rate for a given channel gain, the channels of the scheduled users need to have (1) as many propagation paths as possibl…
Millimeter wave (mmWave) links have the potential to offer high data rates and capacity needed in fifth generation (5G) networks, however they have very high penetration and path loss. A solution to this problem is to bring the base station closer to the end-user through heterogeneous networks (HetNets). HetNets could be designed to allow users to connect to different base stations (BSs) in the uplink and downlink. This phenomenon is known as downlink-uplink decoupling (DUDe). This paper explores the effect of DUDe in a three tier HetNet deployed in two different real-world environments. Our s…
Multi-tier architecture improves the spatial reuse of radio spectrum in cellular networks, but it introduces complicated heterogeneity in the spatial distribution of transmitters, which brings new challenges in interference analysis. In this work, we present a stochastic geometric model to evaluate the uplink interference in a two-tier network considering multi-type users and base stations. Each type of tier-1 users and tier-2 base stations are modeled as independent homogeneous Poisson point processes, and tier-2 users are modeled as locally non-homogeneous clustered Poisson point processes c…
In this paper, we analyze the energy coverage performance of heterogeneous millimeter wave (mmWave) wireless power transfer (WPT) networks, where macro base stations (MBSs) are distributed according to a Poisson point process (PPP), the location of power beacons (PBs) is modeled as a $k$-tier Poisson cluster process (PCP), and energy users (EUs) are clustered around the centers of PB clusters. Moreover, the cosine antenna gain model is adopted instead of the prevalent flap-top gain model, which is simpler in derivation but less accurate. Based on the generalized exponential distribution approx…
Millimeter wave (mmWave) communication by utilizing lens antenna arrays is a promising technique for realizing cost-effective 5G wireless systems with large MIMO (multiple-input multiple-output) but only limited radio frequency (RF) chains. This paper studies an uplink multi-user mmWave single-sided lens MIMO system, where only the base station (BS) is equipped with a full-dimensional (FD) lens antenna array with both elevation and azimuth angle resolution capabilities, and each mobile station (MS) employs the conventional uniform planar array (UPA) without the lens. By exploiting the angle-de…
Millimeter wave (mmWave) communication systems using adaptive-resolution analog-to-digital converters (RADCs) have recently drawn considerable interests from the research community as benefit of their high energy efficiency and low implementation cost. In this paper, we focus on the mmWave uplink using RADCs and investigate the joint user scheduling and resource allocation problem. Specifically, we seek to maximize the system throughput of the scheduled users by jointly optimizing their transmit power level and hybrid combiners as well as the number of quantization bits, subject to practical c…
Initial access is the process which allows a mobile user to first connect to a cellular network. It consists of two main steps: cell search (CS) on the downlink and random access (RA) on the uplink. Millimeter wave (mmWave) cellular systems typically must rely on directional beamforming (BF) in order to create a viable connection. The beamforming direction must therefore be learned-as well as used-in the initial access process for mmWave cellular networks. This paper considers four simple but representative initial access protocols that use various combinations of directional beamforming and o…
Green Learning for STAR-RIS mmWave Systems with Implicit CSI
Institute of Communication Engineering (ICE), National Sun Yat-sen University (NSYSU)（通信工程研究所，国立中山大学）；Research Center for Information Technology Innovation (CITI), Academia Sinica (AS)（信息科技创新研究中心，台湾“中央研究院”）；Bradley Department of Electrical and Computer Engineering (ECE), Virginia Tech (VT)（电气与计算机工程系，弗吉尼亚理工大学）；Ming Hsieh Department of Electrical Engineering, University of Southern California (USC)（电气工程系，南加州大学）
This paper investigates the performance of millimeter wave (mmWave) communications in clustered device-to-device (D2D) networks. The locations of D2D transceivers are modeled as a Poisson Cluster Process (PCP). In each cluster, devices are equipped with multiple antennas, and the active D2D transmitter (D2D-Tx) utilizes mmWave to serve one of the proximate D2D receivers (D2D-Rxs). Specifically, we introduce three user association strategies: 1) Uniformly distributed D2D-Tx model; 2) Nearest D2D-Tx model; 3) Closest line-of-site (LOS) D2D-Tx model. To characterize the performance of the conside…
The high reflect beamforming gain of the intelligent reflecting surface (IRS) makes it appealing not only for wireless information transmission but also for wireless power transfer. In this letter, we consider an IRS-assisted wireless powered communication network, where a base station (BS) transmits energy to multiple users grouped into multiple clusters in the downlink, and the clustered users transmit information to the BS in the manner of hybrid non-orthogonal multiple access and time division multiple access in the uplink. We investigate optimizing the reflect beamforming of the IRS and t…
