In this paper, we first introduce a generalized modeling and analysis framework to explore the fundamental interactions between user association, coverage probability and link rate in a millimeter wave (mmWave) heterogeneous cellular network (HetNet) in which there are multiple tiers of the ultra-high-frequency (UHF) macrocell and small cell base stations (BSs) and a single tier of mmWave small cell BSs. A generalized user association scheme that can cover many path-loss-based user association schemes is proposed and its related probabilistic properties that facilitate the derivations of the coverage probability and link rate are derived. The derived general expressions of the coverage and link rate not only shed light on how to design user association functions in order to maximize the coverage and link rate but also show that it is impossible to devise a user association scheme that maximizes the coverage and link rate at the same time. Namely, there exists a fundamental tradeoff between the coverage and link rate in mmWave HetNets with distinct bandwidths in the UHF and mmWave bands while a user is associating with a BS. We characterize the coverage-optimal and rate-optimal user association schemes and numerically validate their performances and show the coverage-rate tradeoff problem.
Millimeter-wave (mmWave) bands have been attracting growing attention as a possible candidate for next-generation cellular networks, since the available spectrum is orders of magnitude larger than in current cellular allocations. To precisely design mmWave systems, it is important to examine mmWave interference and SIR coverage under large-scale deployments. For this purpose, we apply an accurate mmWave channel model, derived from experiments, into an analytical framework based on stochastic geometry. In this way we obtain a closed-form SIR coverage probability in large-scale mmWave cellular n…
In this paper, energy efficiency of relay-assisted millimeter wave (mmWave) cellular networks with Poisson Point Process (PPP) distributed base stations (BSs) and relay stations (RSs) is analyzed using tools from stochastic geometry. The distinguishing features of mmWave communications such as directional beamforming and having different path loss laws for line-of-sight (LOS) and non-line-of-sight (NLOS) links are incorporated into the energy efficiency analysis. Following the description of the system model for mmWave cellular networks, coverage probabilities are computed for each link. Subse…
In this paper, the outage performance of relay-assisted millimeter wave (mmWave) cellular systems employing joint spatial division and multiplexing (JSDM) is investigated. It is assumed that the macro base station (BS) equipped with a large number of antennas serves the single antenna pico BS (as a relay) and users simultaneously, and that the pico BS is located at the edge of the macro cell. Theoretical analysis of the signal-to-interference-plus-noise ratio (SINR) outage probability of each user is first obtained. The cell SINR outage probability is then derived. Under the noise-limited assu…
In this paper, we investigate the propagation coupling loss (captures all sources of attenuation between serving cell and mobile station (MS)) and geometry metric (GM) (downlink average signal-to-interference plus noise ratio) performance of mmWave cellular networks for outdoor and indoor MSs, considering urban micro (UMi) environments. Based on these studies, we identify effective mmWave frequency bands for cellular communication. We consider 3GPP compliant system-level simulations with two power allocation schemes: 1) transmit power scaled with communication bandwidth, and 2) constant total …
The millimeter wave (mmWave) bands are likely to play a significant role in next generation cellular systems due to the possibility of very high throughput thanks to the availability of massive bandwidth and high-dimensional antennas. Especially in Non-Line-of-Sight conditions, significant variations in the received RF power can occur as a result of the scattering from nearby building and terrain surfaces. Scattering objects come and go as the user moves through the local environment. At the higher end of the mmWave band, rough surface scatter generates cluster-based small-scale fading, where …
Recent researches show that millimeter wave (mmWave) communications can offer orders of magnitude increases in the cellular capacity. However, the secrecy performance of a mmWave cellular network has not been investigated so far. Leveraging the new path-loss and blockage models for mmWave channels, which are significantly different from the conventional microwave channel, this paper comprehensively studies the network-wide physical layer security performance of the downlink transmission in a mmWave cellular network under a stochastic geometry framework. We first study the secure connectivity p…
In this paper, a mathematical framework for the analysis of average symbol error probability (ASEP) in millimeter wave (mmWave) cellular networks with Poisson Point Process (PPP) distributed base stations (BSs) is developed using tools from stochastic geometry. The distinguishing features of mmWave communications such as directional beamforming and having different path loss laws for line-of-sight (LOS) and non-line-of-sight (NLOS) links are incorporated in the average error probability analysis. First, average pairwise error probability (APEP) expression is obtained by averaging pairwise erro…
In this paper, an analytical framework is provided to analyze the uplink performance of device-to-device (D2D)-enabled millimeter wave (mmWave) cellular networks with clustered D2D user equipments (UEs). Locations of cellular UEs are modeled as a Poison Point Process (PPP), while locations of potential D2D UEs are modeled as a Poisson Cluster Process (PCP). Signal-to-interference-plus-noise ratio (SINR) outage probabilities are derived for both cellular and D2D links using tools from stochastic geometry. The distinguishing features of mmWave communications such as directional beamforming and h…
In mmWave networks, a large or nearby object can obstruct multiple communication links, which results in spatial correlation in the blocking probability between a user and two or more base stations (BSs). This paper characterizes this blocking correlation and derives its impact on the signal-to-interference-plus-noise ratio (SINR) of a mmWave cellular network. We first present an exact analysis of a 1D network and highlight the impact of blocking correlation in the derived expressions. Gaining insights from the 1D analysis, we develop an analytical framework for a 2D network where we character…
We study how dense multi-antenna millimeter wave (mmWave) cellular network performance scales in terms of the base station (BS) spatial density $λ$, by studying the signal-to-interference-plus-noise ratio (SINR) and the area spectral efficiency (ASE). If the number of antennas at each BS scales at least linearly with $λ$, which increases the number of possible beam configurations and their main-lobe gain, and decreases their side-lobe gain, we prove that the SINR approaches a finite random variable that is independent of $λ$ and the ASE scales at least linearly with $λ$. In contrast, if the nu…
Cellular networks equipped with mobile edge computing (MEC) servers can be beneficial for unmanned aerial vehicles (UAVs) with limited onboard computation power and battery life-time. In this paper, we compare energy consumption of a UAV connected to cellular MEC servers in various possible scenarios such as onboard/MEC processing or parallel computation. Using detailed 3GPP-based modelings, we provide quantitative understanding of the most energy efficient approach and its relation with communication technologies, computation factors, and mobility parameters. Our findings show that, across th…
Technologies for mmWave communication are at the forefront of investigations in both industry and academia, as the mmWave band offers the promise of orders of magnitude additional available bandwidths to what has already been allocated to cellular networks. The much larger number of antennas that can be supported in a small footprint at mmWave bands can be leveraged to harvest massive-MIMO type beamforming and spatial multiplexing gains. Similar to LTE systems, two prerequisites for harvesting these benefits are detecting users and acquiring user channel state information (CSI) in the training…
The highly directional and adaptive antennas used in mmWave communication open up the possibility of uncoordinated sharing of spectrum licenses between commercial cellular operators. There are several advantages to sharing including a reduction in license costs and an increase in spectrum utilization. In this paper, we establish the theoretical feasibility of spectrum license sharing among mmWave cellular operators. We consider a heterogeneous multi-operator system containing multiple independent cellular networks, each owned by an operator. We then compute the SINR and rate distribution for d…
Communication at mmWave frequencies is one of the major innovations of the fifth generation of cellular networks, because of the potential multi-gigabit data rate given by the large amounts of available bandwidth. The mmWave channel, however, makes reliable communications particularly challenging, given the harsh propagation environment and the sensitivity to blockage. Therefore, proper modeling of the mmWave channel is fundamental for accurate results in system simulations of mmWave cellular networks. Nonetheless, complex models, such as the 3GPP channel model for frequencies above 6 GHz, may…
In this paper, we provide an analytical framework to analyze the uplink performance of device-to-device (D2D)-enabled millimeter wave (mmWave) cellular networks. Signal-to- interference-plus-noise ratio (SINR) outage probabilities are derived for both cellular and D2D links using tools from stochastic geometry. The distinguishing features of mmWave communications such as directional beamforming and having different path loss laws for line-of-sight (LOS) and non-line-of-sight (NLOS) links are incorporated into the outage analysis by employing a flexible mode selection scheme and Nakagami fading…
Initial deployments of millimeter wave (mmWave) cellular networks are likely to be enabled with self-backhauling. In this work, we propose a random spatial model to analyze uplink (UL) and downlink (DL) SINR distribution and mean rates corresponding to different access-backhaul and UL-DL resource allocation schemes in a self-backhauled mmWave cellular network with Poisson point process (PPP) deployment of users and base stations. In particular, we focus on heuristic implementations of static and dynamic time division duplexing (TDD) for access links with synchronized or unsynchronized access-b…
Enabling the high data rates of millimeter wave (mmWave) cellular systems requires deploying large antenna arrays at both the basestations and mobile users. The beamforming weights of these large arrays need to be tuned to guarantee sufficient beamforming gains. Prior work on coverage and rate of mmWave cellular networks focused mainly on the case when basestations and mobile users beamfomring vectors are perfectly designed for maximum beamforming gains. Designing beamforming/combining vectors, though, requires training which may impact both the SINR coverage and rate of mmWave cellular system…
Regulators all around the world have started identifying the portions of the spectrum that will be used for the next generation of cellular networks. A band in the mmWave spectrum will be exploited to increase the available capacity. In response to the very high expected traffic demand, a sharing mechanism may make it possible to use the spectrum more efficiently. In this work, moving within the European and Italian regulatory conditions, we propose the use of Licensed Spectrum Access (LSA) to coordinate sharing among cellular operators. Additionally, we show some preliminary results on our re…
Large antenna arrays will be needed in future millimeter wave (mmWave) cellular networks, enabling a large number of different possible antenna architectures and multiple-input multiple-output (MIMO) techniques. It is still unclear which MIMO technique is most desirable as a function of different network parameters. This paper, therefore, compares the coverage and rate performance of hybrid beamforming enabled multi-user (MU) MIMO and single-user spatial multiplexing (SM) with single-user analog beamforming (SU-BF). A stochastic geometry model for coverage and rate analysis is proposed for MU-…
The next generation of cellular networks (5G) will exploit the mmWave spectrum to increase the available capacity. Communication at such high frequencies, however, suffers from high path loss and blockage, therefore directional transmissions using antenna arrays and dense deployments are needed. Thus, when evaluating the performance of mmWave mobile networks, it is necessary to accurately model the complex channel, the directionality of the transmission, but also the interplay that these elements can have with the whole protocol stack, both in the radio access and in the higher layers. In this…
Based on the distinguishing features of multi-tier millimeter wave (mmWave) networks such as different transmit powers, different directivity gains from directional beamforming alignment and path loss laws for line-of-sight (LOS) and non-line-of-sight (NLOS) links, we introduce a normalization model to simplify the analysis of multi-tier mmWave cellular networks. The highlight of the model is that we convert a multi-tier mmWave cellular network into a single-tier mmWave network, where all the base stations (BSs) have the same normalized transmit power 1 and the densities of BSs scaled by LOS o…
Due to the greater path loss, shadowing, and increased effect of blockage in millimeter wave cellular networks, base station sharing among network service providers has the potential to significantly improve overall network capacity. However, a service provider may find that despite the technical gains, sharing actually reduces its profits because it makes price competition between service providers tougher. In this work, a weighted scheduling algorithm is described, which gives greater control over how the airtime resource is allocated within a shared cell. It is shown that, under certain mar…
In this paper, a new mathematical framework to the analysis of millimeter wave cellular networks is introduced. Its peculiarity lies in considering realistic path-loss and blockage models, which are derived from experimental data recently reported in the literature. The path-loss model accounts for different distributions for line-of-sight and non-line-of-sight propagation conditions and the blockage model includes an outage state that provides a better representation of the outage possibilities of millimeter wave communications. By modeling the locations of the base stations as points of a Po…
In this paper, the outage performance of a two-tier heterogeneous mmWave cellular networks employing joint spatial division and multiplexing (JSDM) is investigated. It is assumed that macro base stations (BSs) equipped with a large number of antennas and pico BSs equipped with single antenna serve users simultaneously. The two-tier BSs and users are distributed according to independent Poisson point processes (PPPs). Theoretical analysis of the signal-to-interference-plus-noise ratio (SINR) outage probability of the typical user is first provided. The all SINR outage probability of the two tie…
Deploying Sub-6GHz networks together with millimeter wave (mmWave) is a promising solution to achieve high data rates in traffic hotspots while guaranteeing sufficient coverage, where mmWave small cells are densely deployed to provide high quality of service. In this paper, we propose an analytical framework to investigate the integrated Sub-6GHz-mmWave cellular networks, in which the Sub-6GHz base stations (BSs) are modeled as a Poisson point process, and the mmWave BSs are clustered following a Poisson cluster process in traffic hotspots. We conduct stochastic geometry-based analysis and der…
In this paper, we propose a novel policy for device caching that facilitates popular content exchange through high-rate device-to-device (D2D) millimeter-wave (mmWave) communication. The D2D-aware caching (DAC) policy splits the cacheable content into two content groups and distributes it randomly to the user equipment devices (UEs), with the goal to enable D2D connections. By exploiting the high bandwidth availability and the directionality of mmWaves, we ensure high rates for the D2D transmissions, while mitigating the co-channel interference that limits the throughput gains of D2D communica…
Large antenna arrays and millimeter-wave (mmWave) frequencies have been attracting growing attention as possible candidates to meet the high requirements of future 5G mobile networks. In view of the large path loss attenuation in these bands, beamforming techniques that create a beam in the direction of the user equipment are essential to perform the transmission. For this purpose, in this paper, we aim at characterizing realistic antenna radiation patterns, motivated by the need to properly capture mmWave propagation behaviors and understand the achievable performance in 5G cellular scenarios…
In this work, we present a framework analysis of millimeter waves (mmWaves) vehicular communications systems. Communications between vehicles take place through a cooperative relay which acts as an intermediary base station (BS). The relay is equipped with multiple transmit and receive antennas and it employs decode-and-forward (DF) to process the signal. Also, the relay applies maximal ratio combining (MRC), and maximal ratio transmission (MRT), respectively, to receive and forward the signal. As the vehicles' speeds are relatively high, the channel experiences a fast fading and this time var…
While spectrum at millimeter wave (mmWave) frequencies is less scarce than at traditional frequencies below 6 GHz, still it is not unlimited, in particular if we consider the requirements from other services using the same band and the need to license mmWave bands to multiple mobile operators. Therefore, an efficient spectrum access scheme is critical to harvest the maximum benefit from emerging mmWave technologies. In this paper, we introduce a new hybrid spectrum access scheme for mmWave networks, where data is aggregated through two mmWave carriers with different characteristics. In particu…
Millimeter-wave (mmWave) cellular systems are power-limited and susceptible to blockages. As a result, mmWave connectivity will be likely to be intermittent. One promising approach to increasing mmWave connectivity and range is to use relays. Device-to-device (D2D) communications open the door to the vast opportunities of D2D and device-to-network relaying for mmWave cellular systems. In this correspondence, we study how to select a good relay for a given source-destination pair in a two-hop mmWave cellular system, where the mmWave links are subject to random Bernoulli blockages. In such a sys…
In this paper, we extend the diversity and multiplexing tradeoff (DMT) analysis from point-to-point channels to cellular systems to evaluate the impact of inter-cell interference on the system reliability and efficiency. Fundamental tradeoff among diversity order, multiplexing gain and inter-cell interference intensity is characterized to reveal the capability of multiple antennas in cellular systems. And the detrimental effects of the inter-cell interference on the system performance of diversity and multiplexing is presented and analyzed.
Millimeter wave (mmWave) holds promise as a carrier frequency for fifth generation cellular networks. Because mmWave signals are sensitive to blockage, prior models for cellular networks operated in the ultra high frequency (UHF) band do not apply to analyze mmWave cellular networks directly. Leveraging concepts from stochastic geometry, this paper proposes a general framework to evaluate the coverage and rate performance in mmWave cellular networks. Using a distance-dependent line-of-site (LOS) probability function, the locations of the LOS and non-LOS base stations are modeled as two indepen…
A K-tier heterogeneous downlink millimeter wave (mmWave) cellular network with user-centric small cell deployments is studied in this paper. In particular, we consider a heterogeneous network model with user equipments (UEs) being distributed according to a Poisson Cluster Process (PCP). Specifically, we address two cluster processes, namely (i) Thomas cluster process, where the UEs are clustered around the base stations (BSs) and the distances between UEs and the BS are modeled as Gaussian distributed, and (ii) Matern cluster process, where the UEs are scattered according to a uniform distrib…
This paper proposes a cellular network exploiting millimeter-wave (mmWave) and ultra-densified base stations (BSs) to achieve the far-reaching 5G aim in downlink average rate. The mmWave overlaid network however incurs a pitfall that its ample data rate is only applicable for downlink transmissions due to the implementation difficulty at mobile users, leading to an immense difference between uplink and downlink rates. We therefore turn our attention not only to maximize downlink rate but also to ensure the minimum uplink rate. With this end, we firstly derive the mmWave overlaid ultra-dense ce…
Hybrid analog and digital BeamForming (HBF) is one of the enabling transceiver technologies for millimeter Wave (mmWave) Multiple Input Multiple Output (MIMO) systems. This technology offers highly directional communication, which is able to confront the intrinsic characteristics of mmWave signal propagation. However, the small coherence time in mmWave systems, especially under mobility conditions, renders efficient Beam Management (BM) in standalone mmWave communication a very difficult task. In this paper, we consider HBF transceivers with planar antenna panels and design a multi-level beam …
This paper investigates the extent to which spectrum sharing in mmWave networks with multiple cellular operators is a viable alternative to traditional dedicated spectrum allocation. Specifically, we develop a general mathematical framework by which to characterize the performance gain that can be obtained when spectrum sharing is used, as a function of the underlying beamforming, operator coordination, bandwidth, and infrastructure sharing scenarios. The framework is based on joint beamforming and cell association optimization, with the objective of maximizing the long-term throughput of the …
The presence of signal outage, due to shadowing and blockage, is expected to be the main bottleneck in millimeter wave (mmWave) networks. Moreover, with the anticipated vision that mmWave networks would have a dense deployment of base stations, interference from strong line-of-sight base stations increases too, thus further increasing the probability of outage. To address the issue of reducing outage, this paper explores the possibility of base station cooperation in the downlink of a mmWave heterogenous network. The main focus of this work is showing that, in a stochastic geometry framework, …
Unmanned aerial vehicles (UAVs) have brought a lot of flexibility in the network deployment. However, UAVs suffer from the high mobility and instability. To improve the capacity and reliability of the UAV networks, millimeter-wave (mmWave) and reconfigurable intelligent surfaces (RISs) can be used in the system. In this paper, we consider an RIS-assisted mmWave UAV wireless cellular network, where UAVs serve several users with the help of multiple RISs. We jointly optimize the deployment, user scheduling, beamforming vector, and RIS phases to maximize the sum-rate, with the constraints of the …
At millimeter wave (mmWave) frequencies, signals are prone to blocking by objects in the environment, which causes paths to go from line-of-sight (LOS) to non-LOS (NLOS). We consider macrodiversity as a strategy to improve the performance of mmWave cellular systems, where the user attempts to connect with two or more base stations. An accurate analysis of macrodiversity must account for the possibility of correlated blocking, which occurs when a single blockage simultaneously blocks the paths to two base stations. In this paper, we analyze the macrodiverity gain in the presence of correlated r…
Sharing the spectrum among multiple operators seems promising in millimeter wave (mmWave) systems. One explanation is the highly directional transmission in mmWave, which reduces the interference caused by one network on the other networks sharing the same resources. In this paper, we model a mmWave cellular system where an operator that primarily owns an exclusive-use license of a certain band can sell a restricted secondary license of the same band to another operator. This secondary network has a restriction on the maximum interference it can cause to the original network. Using stochastic …
In this paper, we provide an analytical framework to analyze heterogeneous downlink mmWave cellular networks consisting of K tiers of randomly located base stations (BSs) where each tier operates in a mmWave frequency band. Signal-to-interference-plus-noise ratio (SINR) coverage probability is derived for the entire network using tools from stochastic geometry. The distinguishing features of mmWave communications such as directional beamforming and having different path loss laws for line-of-sight (LOS) and non-line-of-sight (NLOS) links are incorporated into the coverage analysis by assuming …
Millimeter wave (mmWave) cellular systems will enable gigabit-per-second data rates thanks to the large bandwidth available at mmWave frequencies. To realize sufficient link margin, mmWave systems will employ directional beamforming with large antenna arrays at both the transmitter and receiver. Due to the high cost and power consumption of gigasample mixed-signal devices, mmWave precoding will likely be divided among the analog and digital domains. The large number of antennas and the presence of analog beamforming requires the development of mmWave-specific channel estimation and precoding a…
Competing cellular operators aggressively share infrastructure in many major US markets. If operators also were to share spectrum in next-generation millimeter-wave (mmWave) networks, intra-cellular interference will become correlated with inter-cellular interference. We propose a mathematical framework to model a multi-operator mmWave cellular network with co-located base-stations (BSs). We then characterize the signal-to-interference-plus-noise ratio (SINR) distribution for an arbitrary network and derive its coverage probability. To understand how varying the spatial correlation between dif…
TCP is the most widely used transport protocol in the internet. However, it offers suboptimal performance when operating over high bandwidth mmWave links. The main issues introduced by communications at such high frequencies are (i) the sensitivity to blockage and (ii) the high bandwidth fluctuations due to Line of Sight (LOS) to Non Line of Sight (NLOS) transitions and vice versa. In particular, TCP has an abstract view of the end-to-end connection, which does not properly capture the dynamics of the wireless mmWave link. The consequence is a suboptimal utilization of the available resources.…
In this paper, we discuss resource sharing, a key dimension in mmWave network design in which spectrum, access and/or network infrastructure resources can be shared by multiple operators. It is argued that this sharing paradigm will be essential to fully exploit the tremendous amounts of bandwidth and the large number of antenna degrees of freedom available in these bands, and to provide statistical multiplexing to accommodate the highly variable nature of the traffic. In this paper, we investigate and compare various sharing configurations in order to capture the enhanced potential of mmWave …
In this paper, we propose a novel and effective approach to optimizing the load balancing in a millimeter wave (mmWave) cellular heterogeneous network (HetNet) with a macro-tier and a micro-tier. The unique characteristics of mmWave transmission are incorporated into the network by adopting the Poisson point process (PPP) for base station (BS) location, the line-of-sight (LoS) ball model for mmWave links, the sectored antenna model for key antenna array characteristics, and Nakagami-$m$ fading for wireless channels. To reduce the load of macro-tier BSs, we consider a bias factor $A_{s}$ in the…
Millimeter-wave (mmWave) communication is a promising solution for achieving high data rate and low latency in 5G wireless cellular networks. Since directional beamforming and antenna arrays are exploited in the mmWave networks, accurate angle-of-arrival (AOA) information can be obtained and utilized for localization purposes. The performance of a localization system is typically assessed by the Cramer-Rao lower bound (CRLB) evaluated based on fixed node locations. However, this strategy only produces a fixed value for the CRLB specific to the scenario of interest. To allow randomly distribute…
Outdoor-to-indoor communications in millimeter-wave (mmWave) cellular networks have been one challenging research problem due to the severe attenuation and the high penetration loss caused by the propagation characteristics of mmWave signals. We propose a viable solution to implement the outdoor-to-indoor mmWave communication system with the aid of an active intelligent transmitting surface (active-ITS), where the active-ITS allows the incoming signal from an outdoor base station (BS) to pass through the surface and be received by the indoor user-equipments (UEs) after shifting its phase and m…
A K-tier heterogeneous mmWave uplink cellular network with clustered user equipments (UEs) is considered in this paper. In particular, UEs are assumed to be clustered around small-cell base stations (BSs) according to a Gaussian distribution, leading to the Thomas cluster process based modeling. Specific and practical line-of-sight (LOS) and non-line-of-sight (NLOS) models are adopted with different parameters for different tiers. The probability density functions (PDFs) and complementary cumulative distribution functions (CCDFs) of different distances from UEs to BSs are characterized. Couple…
The millimeter wave (mmWave) bands have recently attracted considerable interest for next-generation cellular systems due to the massive available bandwidths at these frequencies. However, a key challenge in designing mmWave cellular systems is initial access -- the procedure by which a mobile establishes an initial link-layer connection to a base station cell. MmWave communication relies on highly directional transmissions and the initial access procedure must thus provide a mechanism by which initial transmission directions can be searched in a potentially large angular space. Design options…
Millimeter wave (mmWave) signals are much more sensitive to blockage, which results in a significant increase of the outage probability, especially for the users at the edge of the cells. In this paper, we exploit the technique of base station (BS) cooperation to improve the performance of the cell-edge users in the downlink transmission of mmWave cellular networks. We design two cooperative schemes, which are referred to as fixed-number BS cooperation (FNC) scheme and fixed-region BS cooperation (FRC) scheme, respectively. In FNC scheme, the cooperative BSs consist of the M nearest BSs around…
Due to the heavy reliance of millimeter-wave (mmWave) wireless systems on directional links, beamforming (BF) with high-dimensional arrays is essential for cellular systems in these frequencies. How to perform the array processing in a power efficient manner is a fundamental challenge. Analog and hybrid BF require fewer analog-to-digital and digital-to-analog converters (ADCs and DACs), but can only communicate in a small number of directions at a time, limiting directional search, spatial multiplexing and control signaling. Digital BF enables flexible spatial processing, but must be operated …
The highly directional beams applied in millimeter wave (mmWave) cellular networks make it possible to achieve near interference-free (NIF) transmission under judiciously designed space-time user scheduling, where the power of intra-/inter-cell interference between any two users is below a predefined threshold. In this paper, we investigate two aspects of the NIF space-time user scheduling in a multi-cell mmWave network with multi-RF-chain base stations. Firstly, given that each user has a requirement on the number of space-time resource elements, we study the NIF user scheduling problem to mi…
Wireless indoor coverage and data capacity are important aspects of cellular networks. With the ever-increasing data traffic, demand for more data capacity indoors is also growing. The lower frequencies of the legacy frequency bands of macro outdoor cells manage to provide coverage inside buildings, however, new frequencies foreseen for the 5th generation (5G) of mobile communications in the millimeter wave (mmWave) spectrum penetrate very poorly into buildings. Therefore, a massive densification of the network would require to deploy a large number of indoor small cells, which would lead to h…
We provide a comprehensive overview of mathematical models and analytical techniques for millimeter wave (mmWave) cellular systems. The two fundamental physical differences from conventional Sub-6GHz cellular systems are (i) vulnerability to blocking, and (ii) the need for significant directionality at the transmitter and/or receiver, which is achieved through the use of large antenna arrays of small individual elements. We overview and compare models for both of these factors, and present a baseline analytical approach based on stochastic geometry that allows the computation of the statistica…
In this paper, a novel Poisson hole process (PHP) modeling of wireless networks is proposed. We consider a more general hole shape, i.e. circular sector holes in a random direction, to capture the spatial separation between tiers in a millimeter wave (mmWave) heterogeneous cellular network (HCN). In this case, small cell BSs (SBSs) and macrocell BSs (MBSs) are distributed as a PHP and Poisson point process (PPP). Due to fundamental propagation differences between mmWave and microwave frequencies, we incorporate blockage and directional beamforming in the network model. Using tools from stochas…
In order to overcome the anticipated tremendous growth in the volume of mobile data traffic, the next generation of cellular networks will need to exploit the large bandwidth offered by the millimeter-wave (mmWave) band. A key distinguishing characteristic of mmWave is its use of highly directional and steerable antennas. In addition, future networks will be highly densified through the proliferation of base stations and their supporting infrastructure. With the aim of further improving the overall throughput of the network by mitigating the effect of frequency-selective fading and co-channel …
With the severe spectrum shortage in conventional cellular bands, millimeter-wave (mmWave) frequencies have been attracting growing attention for next-generation micro- and picocellular wireless networks. A fundamental and open question is whether mmWave cellular networks are likely to be noise- or interference-limited. Identifying in which regime a network is operating is critical for the design of MAC and physical-layer procedures and to provide insights on how transmissions across cells should be coordinated to cope with interference. This work uses the latest measurement-based statistical …
