In this letter, we propose two power allocation schemes based on the statistical channel state information (CSI) and instantaneous s->r CSI at transmitters respectively for a 2-N-2 cooperative multicast system with non-regenerative network coding.Then the isolated precoder and the distributed precoder are respectively applied to the schemes to further improve the system performance by achieving the full diversity gain. Finally, we demonstrate that joint instantaneous s->r CSI based power allocation and distributed precoder design achieve the best performance.
In the present work, a multibeam satellite that employs aggressive frequency reuse towards increasing the offered throughput is considered. Focusing on the forward link, the goal is to employ multi-antenna signal processing techniques, namely linear precoding, to manage the inter-beam interferences. In this context, fundamental practical limitations, namely the rigid framing structure of satellite communication standards and the on-board per-antenna power constraints, are herein considered. Therefore, the concept of optimal frame based precoding under per-antenna constraints, is discussed. Thi…
Next generation multi-beam SatCom architectures will heavily exploit full frequency reuse schemes along with interference management techniques, e.g., precoding or multiuser detection, to drastically increase the system throughput. In this framework, we address the problem of the user selection for multicast precoding by formulating it as a clustering problem. By introducing a novel mathematical framework, we design fixed-/variable-size clustering algorithms that group users into simultaneously precoded and served clusters while maximising the system throughput. Numerical simulations are used …
Next generation of wireless networks will likely rely on large-scale antenna systems, either in the form of massive multi-input-multi-output (MIMO) or millimeter wave (mmWave) systems. Therefore, the conventional fully-digital precoders are not suitable for physical layer multicasting as they require a dedicated radio frequency chain per antenna element. In this paper, we show that in a multi-group multicasting system with an arbitrary number of transmit antennas, $G$ multicasting groups, and an arbitrary number of users in each group, one can achieve the performance of any fully-digital preco…
This work investigates the problem of downlink transmit precoding for physical layer multicasting with a limited number of radio-frequency (RF) chains. To tackle the RF hardware constraint, we consider a hybrid precoder that is partitioned into a high-dimensional RF precoder and a low-dimensional baseband precoder. Considering a total transmit power constraint over the RF chains, the goal is to maximize the minimum (max-min) received signal-to-noise ratio (SNR) among all users. We propose a low complexity algorithm to compute the RF precoder that achieves near-optimal max-min performance. More…
Precoding has been conventionally considered as an effective means of mitigating the interference and efficiently exploiting the available in the multiantenna downlink channel, where multiple users are simultaneously served with independent information over the same channel resources. The early works in this area were focused on transmitting an individual information stream to each user by constructing weighted linear combinations of symbol blocks (codewords). However, more recent works have moved beyond this traditional view by: i) transmitting distinct data streams to groups of users and ii)…
This paper studies the joint design of user grouping, scheduling (or admission control) and precoding to optimize energy efficiency (EE) for multigroup multicast scenarios in single-cell multiuser MISO downlink channels. Noticing that the existing definition of EE fails to account for group sizes, a new metric called multicast energy efficiency (MEE) is proposed. In this context, the joint design is considered for the maximization of MEE, EE, and scheduled users. Firstly, with the help of binary variables (associated with grouping and scheduling) the joint design problem is formulated as a mix…
We consider multi-group multicast precoding designs for cell-free massive multiple-input multiple-output (MIMO) systems. To optimize the transmit and receive beamforming strategies, we focus on minimizing the sum of the maximum mean squared errors (MSEs) over the multicast groups, which is then approximated with the sum MSE to simplify the computation and signaling. We adopt an iterative bi-directional training scheme with uplink and downlink precoded pilots to cooperatively design the multi-group multicast precoders at each base station and the combiners at each user equipment in a distribute…
This paper studies the concept of jointly utilizing the data information(DI)and channel state information (CSI) in order to design symbol-level precoders for a multiple input and single output (MISO) downlink channel. In this direction, the interference among the simultaneous data streams is transformed to useful signal that can improve the signal to interference noise ratio (SINR) of the downlink transmissions. We propose a maximum ratio transmissions (MRT) based algorithm that jointly exploits DI and CSI to gain the benefits from these useful signals. In this context, a novel framework to mi…
This paper deals with the problem of precoding in multibeam satellite systems. In contrast to general multiuser multiple-input-multiple-output (MIMO) cellular schemes, multibeam satellite architectures suffer from different challenges. First, satellite communications standards embed more than one user in each frame in order to increase the channel coding gain. This leads to the different so-called multigroup multicast model, whose optimization requires computationally complex operations. Second, when the data traffic is generated by several Earth stations (gateways), the precoding matrix must …
With the goal of improving spectral efficiency, complex rotation-based precoding and power allocation schemes are developed for two multiple-input multiple-output (MIMO) communication systems, namely, simultaneous wireless information and power transfer (SWIPT) and physical layer multicasting. While the state-of-the-art solutions for these problems use very different approaches, the proposed approach treats them similarly using a general tool and works efficiently for any number of antennas at each node. Through modeling the precoder using complex rotation matrices, objective functions (transm…
Current State-of-the-Art High Throughput Satellite systems provide wide-area connectivity through multi-beam architectures. Due to the tremendous system throughput requirements that next generation Satellite Communications (SatCom) expect to achieve, traditional 4-colour frequency reuse schemes are not sufficient anymore and more aggressive solutions as full frequency reuse are being considered for multi-beam SatCom. These approaches require advanced interference management techniques to cope with the significantly increased inter-beam interference both at the transmitter, e.g., precoding, and…
Aiming at maximizing the energy efficiency (EE) of multicast multibeam satellite communications, we consider the precoding design under the total power and quality of service (QoS) constraints. Since the original EE maximization problem is nonconvex, it is sequentially converted into a concave-convex fractional programming problem by introducing some variables and using the first-order Taylor low bound approximation. Based on the Charnes-Cooper transformation, it is further converted into a convex problem. Then an iterative algorithm is presented to design the energy efficient precoding. To fi…
The present work focuses on the forward link of a broadband multibeam satellite system that aggressively reuses the user link frequency resources. Two fundamental practical challenges, namely the need to frame multiple users per transmission and the per-antenna transmit power limitations, are addressed. To this end, the so-called frame-based precoding problem is optimally solved using the principles of physical layer multicasting to multiple co-channel groups under per-antenna constraints. In this context, a novel optimization problem that aims at maximizing the system sum rate under individua…
This paper investigates rate-splitting (RS) precoding for non-orthogonal unicast and multicast (NOUM) transmissions using fully-digital and hybrid precoders. We study the nonconvex weighted sum-rate (WSR) maximization problem subject to a multicast requirement. We propose FALCON, an approach based on sequential parametric optimization, to solve the aforementioned problem. We show that FALCON converges to a local optimum without requiring judicious selection of an initial feasible point. Besides, we show through simulations that by leveraging RS, hybrid precoders can attain nearly the same perf…
This paper investigates dual-layer non-orthogonally superimposed transmissions for industrial internet of things (IoT) millimeter-wave communications. Essentially, the overlayer is a ubiquitous multicast signal devised to serve all the devices in coverage with a common message, i.e., critical control packet. The underlayer is a composite signal that consists of private unicast messages. Due to safety implications, it is critical that all devices can decode the multicast information. To ensure this requirement, we jointly optimize the hybrid precoder, analog combiners, power allocation, and fai…
Current State-of-the-Art High Throughput Satellite systems provide wide-area connectivity through multi-beam architectures. However, due to the tremendous system throughput requirements that next generation Satellite Communications expect to achieve, traditional 4-colour frequency reuse schemes, i.e., two frequency bands with two orthogonal polarisations, are not sufficient anymore and more aggressive solutions as full frequency reuse are gaining momentum. These approaches require advanced interference management techniques to cope with the significantly increased inter-beam interference, like…
The potential of using millimeter-wave (mmWave) to encounter the current bandwidth shortage has motivated packing more antenna elements in the same physical size which permits the advent of massive multiple-input-multiple-output (MIMO) for mmWave communication. However, with increasing number of antenna elements, the ability of allocating a single RF-chain per antenna becomes infeasible and unaffordable. As a cost-effective alternative, the design of hybrid precoding has been considered where the limited-scattering signals are captured by a high-dimensional RF precoder realized by an analog ph…
Optimal physical layer multicasting (PLM) is an NP-hard problem that for simplicity has been studied under idealistic assumptions, e.g., availability of perfect channel state information (CSI), both at the base station (BS) and at the user terminals (UTs). With the advent of massive multiple-input-multiple-output (MIMO), PLM has become more challenging, as the computational complexity of the precoder design is proportional to the number of BS antennas. In this paper, we address these issues by introducing computationally efficient precoders that account for practical CSI acquisition. We derive…
Multicast beamforming is known to improve spectral efficiency. However, its benefits and challenges for hybrid precoders design in millimeter-wave (mmWave) systems remain understudied. To this end, this paper investigates the first joint design of hybrid transmit precoders (with an arbitrary number of finite-resolution phase shifts) and receive combiners for mmWave multi-group multicasting. Our proposed design leverages semidefinite relaxation (SDR), alternating optimization and Cholesky matrix factorization to sequentially optimize the digital/analog precoders at the transmitter and the combi…
Industry 4.0 anticipates massive interconnectivity of industrial devices (e.g., sensors, actuators) to support factory automation and production. Due to the rigidity of wired connections to harmonize with automation, wireless information transfer has attracted substantial attention. However, existing solutions for the manufacturing sector face critical issues in coping with the key performance demands: ultra-low latency, high throughput, and high reliability. Besides, recent advancements in wireless millimeter-wave technology advocates hybrid precoding with affordable hardware and outstanding …
This paper investigates the joint design of hybrid transmit precoder and analog receive combiners for single-group multicasting in millimeter-wave systems. We propose LB-GDM, a low-complexity learning-based approach that leverages gradient descent with momentum and alternating optimization to design (i) the digital and analog constituents of a hybrid transmitter and (ii) the analog combiners of each receiver. In addition, we also extend our proposed approach to design fully-digital precoders. We show through numerical evaluation that, implementing LB-GDM in either hybrid or digital precoders a…
In multi-cast scenario, all desired users are divided into $K$ groups. Each group receives its own individual confidential message stream. Eavesdropper group aims to intercept $K$ confidential-message streams. To achieve a secure transmission, two secure schemes are proposed: maximum group receive power plus null-space (NS) projection (Max-GRP plus NSP) and leakage. The former obtains its precoding vector per group by maximizing its own group receive power subject to the orthogonal constraint, and its AN projection matrix consist of all bases of NS of all desired steering vectors from all grou…
In this paper, we investigate the energy-efficient hybrid precoding design for integrated multicast-unicast millimeter wave (mmWave) system, where the simultaneous wireless information and power transform is considered at receivers. We adopt two sparse radio frequency chain antenna structures at the base station (BS), i.e., fully-connected and subarray structures, and design the codebook-based analog precoding according to the different structures. Then, we formulate a joint digital multicast, unicast precoding and power splitting ratio optimization problem to maximize the energy efficiency of…
This letter considers a two-receiver multiple-input multiple-output (MIMO) Gaussian broadcast channel model with integrated services. Specifically, we combine two sorts of service messages, and serve them simultaneously: one multicast message intended for both receivers and one confidential message intended for only one receiver. The confidential message is kept perfectly secure from the unauthorized receiver. Due to the coupling of service messages, it is intractable to seek capacity-achieving transmit covariance matrices. Accordingly, we propose a suboptimal precoding scheme based on the gen…
In this paper, we investigate the impact of network coding at the relay node on the stable throughput rate in multicasting cooperative wireless networks. The proposed protocol adopts Network-level cooperation in contrast to the traditional physical layer cooperative protocols and in addition uses random linear network coding at the relay node. The traffic is assumed to be bursty and the relay node forwards its packets during the periods of source silence which allows better utilization for channel resources. Our results show that cooperation will lead to higher stable throughput rates than con…
The demand of massive access to the same multimedia content at the same time is one major challenge for next-generation cellular networks in densely-packed urban areas. The content-aware multicast transmission strategies provide promising solutions to such use cases involving many mobile users trying to fetch the same data. In this work, we consider multigroup multicast transmission with a common message (e.g., multimedia content), in which different multicast groups are interested along with their private multicast messages. We further assume that a relay helps the cellular base station (BS) …
In this paper, we propose a cooperative approach to improve the security of both primary and secondary systems in cognitive radio multicast communications. During their access to the frequency spectrum licensed to the primary users, the secondary unlicensed users assist the primary system in fortifying security by sending a jamming noise to the eavesdroppers, while simultaneously protect themselves from eavesdropping. The main objective of this work is to maximize the secrecy rate of the secondary system, while adhering to all individual primary users' secrecy rate constraints. In the case of …
Linear precoding and cooperative jamming for multiuser broadcast channel is studied to enhance the physical layer security. We consider the system where multiple independent data streams are transmitted from the base station to multiple legitimate users with the help of a friendly jammer. It is assumed that a normalized linear precoding matrix is given at the base station, whereas the power allocated to each user is to be determined. The problem is to jointly design the power allocation across different users for linear precoding and the cooperative jamming at the friendly jammer. The goal is …
In a cooperative multiple-antenna downlink cellular network, maximization of a concave function of user rates is considered. A new linear precoding technique called soft interference nulling (SIN) is proposed, which performs at least as well as zero-forcing (ZF) beamforming. All base stations share channel state information, but each user's message is only routed to those that participate in the user's coordination cluster. SIN precoding is particularly useful when clusters of limited sizes overlap in the network, in which case traditional techniques such as dirty paper coding or ZF do not dir…
The problem of network multiple-input multiple-output precoding under distributed channel state information is a notoriously challenging question, for which optimal solutions with reasonable complexity remain elusive. In this context, we assess the value of hierarchical information exchange, whereby an order is established among the transmitters (TXs) in such a way that a given TX has access not only to its local channel estimate but also to the estimates available at the less informed TXs. Assuming regularized zero forcing (RZF) precoding at the TXs, we propose naive, locally robust, and glob…
In downlink multiuser multiple-input multiple-output (MIMO) systems, block diagonalization (BD) is a practical linear precoding scheme which achieves the same degrees of freedom (DoF) as the optimal linear/nonlinear precoding schemes. However, its sum-rate performance is rather poor in the practical SNR regime due to the transmit power boost problem. In this paper, we propose an improved linear precoding scheme over BD with a so-called "effective-SNR-enhancement" technique. The transmit covariance matrices are obtained by firstly solving a power minimization problem subject to the minimum rate…
Multi-antenna precoding effectively mitigates the interference in wireless networks. However, the resultant performance gains can be significantly compromised in practice if the precoder design fails to account for the inaccuracy in the channel state information (CSI) feedback. This paper addresses this issue by considering finite-rate CSI feedback from receivers to their interfering transmitters in the two-user multiple-input-multiple-output (MIMO) interference channel, called cooperative feedback, and proposing a systematic method for designing transceivers comprising linear precoders and eq…
In this paper, we propose a cooperative approach to improve the security of both primary and secondary systems in cognitive radio multicast communications. During their access to the frequency spectrum licensed to the primary users, the secondary unlicensed users assist the primary system in fortifying security by sending a jamming noise to the eavesdroppers, while simultaneously protect themselves from eavesdropping. The main objective of this work is to maximize the secrecy rate of the secondary system, while adhering to all individual primary users' secrecy rate constraints. In the case of …
Base station (BS) cooperative transmission can improve the spectrum efficiency of cellular systems, whereas using which the channels will become asymmetry. In this paper, we study the impact of the asymmetry on the performance of channel estimation and precoding in downlink BS cooperative multiple-antenna multiple-carrier systems. We first present three linear estimators which jointly estimate the channel coefficients from users in different cells with minimum mean square error, robust design and least square criterion, and then study the impact of uplink channel asymmetry on their performance…
A framework is developed for analyzing capacity gains from user cooperation in slow fading wireless networks when the number of nodes (network size) is large. The framework is illustrated for the case of a simple multipath-rich Rayleigh fading channel model. Both unicasting (one source and one destination) and multicasting (one source and several destinations) scenarios are considered. We introduce a meaningful notion of Shannon capacity for such systems, evaluate this capacity as a function of signal-to-noise ratio (SNR), and develop a simple two-phase cooperative network protocol that achiev…
The use of orthogonal signaling schemes such as time-, frequency-, or code-division multiplexing (T-, F-, CDM) in multi-user systems allows for power-efficient simple receivers. It is shown in this paper that by using orthogonal signaling on frequency selective fading channels, the cooperative Nash bargaining (NB)-based precoding games for multi-user systems, which aim at maximizing the information rates of all users, are simplified to the corresponding cooperative resource allocation games. The latter provides additional practically desired simplifications to transmitter design and significan…
A simple line network model is proposed to study the downlink cellular network. Without base station cooperation, the system is interference-limited. The interference limitation is overcome when the base stations are allowed to jointly encode the user signals, but the capacity-achieving dirty paper coding scheme can be too complex for practical implementation. A new linear precoding technique called soft interference nulling (SIN) is proposed, which performs at least as well as zero-forcing (ZF) beamforming under full network coordination. Unlike ZF, SIN allows the possibility of but over-pena…
The performance of cloud-based small cell networks (C-SCNs) relies highly on a capacity-limited fronthaul, which degrade quality of service when it is saturated. Coded caching is a promising approach to addressing these challenges, as it provides abundant opportunities for fronthaul multicast and cooperative transmissions. This paper investigates a cache-enabled C-SCNs, in which small-cell base stations (SBSs) are connected to the central processor via fronthaul, and can prefetch popular contents by applying maximum distance separable (MDS) codes. To fully capture the benefits of fronthaul mul…
Linear precoding exploits the spatial degrees of freedom offered by multi-antenna transmitters to serve multiple users over the same frequency resources. The present work focuses on simultaneously serving multiple groups of users, each with its own channel, by transmitting a stream of common symbols to each group. This scenario is known as physical layer multicasting to multiple co-channel groups. Extending the current state of the art in multigroup multicasting, the practical constraint of a maximum permitted power level radiated by each antenna is tackled herein. The considered per antenna p…
Multicast transmission and wireless caching are effective ways of reducing air and backhaul traffic load in wireless networks. This paper proposes to incorporate these two key ideas for content-centric multicast transmission in a cloud radio access network (RAN) where multiple base stations (BSs) are connected to a central processor (CP) via finite-capacity backhaul links. Each BS has a cache with finite storage size and is equipped with multiple antennas. The BSs cooperatively transmit contents, which are either stored in the local cache or fetched from the CP, to multiple users in the networ…
Direct Low Earth Orbit satellite-to-handheld links are expected to be part of a new era in satellite communications. Space-Division Multiple Access precoding is a technique that reduces interference among satellite beams, therefore increasing spectral efficiency by allowing cooperating satellites to reuse frequency. Over the past decades, optimal precoding solutions with perfect channel state information have been proposed for several scenarios, whereas robust precoding with only imperfect channel state information has been mostly studied for simplified models. In particular, for Low Earth Orb…
We present sufficient conditions for multicasting a set of correlated sources over cooperative networks. We propose joint source-Wyner-Ziv encoding/sliding-window decoding scheme, in which each receiver considers an ordered partition of other nodes. Subject to this scheme, we obtain a set of feasibility constraints for each ordered partition. We consolidate the results of different ordered partitions by utilizing a result of geometrical approach to obtain the sufficient conditions. We observe that these sufficient conditions are indeed necessary conditions for Aref networks. As a consequence o…
In this paper, we consider a joint unicast and multi-group multicast cell-free distributed massive multiple-input multiple-output (MIMO) system, while accounting for co-pilot assignment strategy based channel estimation, pilot contamination and different precoding schemes. Under the co-pilot assignment strategy, we derive the minimum-mean-square error (MMSE) channel state information (CSI) estimation for unicast and multicast users. Given the acquired CSI, the closed-form expressions for downlink achievable rates with maximum ratio transmission (MRT), zero-forcing (ZF) and MMSE beamforming are…
Most works on cell-free massive multiple-input multiple-output (MIMO) consider non-cooperative precoding strategies at the base stations (BSs) to avoid extensive channel state information (CSI) exchange via backhaul signaling. However, considerable performance gains can be accomplished by allowing coordination among the BSs. This paper proposes the first distributed framework for cooperative precoding design in cell-free massive MIMO (and, more generally, in joint transmission coordinated multi-point) systems that entirely eliminates the need for backhaul signaling for CSI exchange. A novel ov…
Symbol-level precoding is a new paradigm for multiuser downlink systems which aims at creating constructive interference among the transmitted data streams. This can be enabled by designing the precoded signal of the multiantenna transmitter on a symbol level, taking into account both channel state information and data symbols. Previous literature has studied this paradigm for MPSK modulations by addressing various performance metrics, such as power minimization and maximization of the minimum rate. In this paper, we extend this to generic multi-level modulations i.e. MQAM and APSK by establis…
This paper proposes the design of robust transceivers with Tomlinson-Harashima precoding (THP) for multiple-input multiple-output (MIMO) relay systems with amplify-and-forward (AF) protocols based on a multi-branch (MB) strategy. The MB strategy employs successive interference cancellation (SIC) on several parallel branches which are equipped with different ordering patterns so that each branch produces transmit signals by exploiting a certain ordering pattern. For each parallel branch, the proposed robust nonlinear transceiver design consists of THP at the source along with a linear precoder …
In this paper, a new optimization framework is presented for the joint design of user selection, power allocation, and precoding in multi-cell multi-user multiple-input multiple-output (MU-MIMO) systems when imperfect channel state information at transmitter (CSIT) is available. By representing the joint optimization variables in a higher-dimensional space, the weighted sum-spectral efficiency maximization is formulated as the maximization of the product of Rayleigh quotients. Although this is still a non-convex problem, a computationally efficient algorithm, referred to as generalized power i…
Multi-antenna precoding effectively mitigates the interference in wireless networks. However, the precoding efficiency can be significantly degraded by the overhead due to the required feedback of channel state information (CSI). This paper addresses such an issue by proposing a systematic method of designing precoders for the two-user multiple-input-multiple-output (MIMO) interference channels based on finite-rate CSI feedback from receivers to their interferers, called cooperative feedback. Specifically, each precoder is decomposed into inner and outer precoders for nulling interference and …
The demand for providing multicast services in cellular networks is continuously and fastly increasing. In this work, we propose a non-orthogonal transmission framework based on layered-division multiplexing (LDM) to support multicast and unicast services concurrently in cooperative multi-cell cellular networks with limited backhaul capacity. We adopt a two-layer LDM structure where the first layer is intended for multicast services, the second layer is for unicast services, and the two layers are superposed with different beamformers. Each user decodes the multicast message first, subtracts i…
Block diagonalization (BD) is a practical linear precoding technique that eliminates the inter-user interference in downlink multiuser multiple-input multiple-output (MIMO) systems. In this paper, we apply BD to the downlink transmission in a cooperative multi-cell MIMO system, where the signals from different base stations (BSs) to all the mobile stations (MSs) are jointly designed with the perfect knowledge of the downlink channels and transmit messages. Specifically, we study the optimal BD precoder design to maximize the weighted sum-rate of all the MSs subject to a set of per-BS power con…
In a Non-Orthogonal Unicast and Multicast (NOUM) transmission system, a multicast stream intended to all the receivers is superimposed in the power domain on the unicast streams. One layer of Successive Interference Cancellation (SIC) is required at each receiver to remove the multicast stream before decoding its intended unicast stream. In this paper, we first show that a linearly-precoded 1-layer Rate-Splitting (RS) strategy at the transmitter can efficiently exploit this existing SIC receiver architecture. We further propose multi-layer transmission strategies based on the generalized RS an…
Xidian University（西安电子科技大学）；Southeast University（东南大学）；Information Engineering University（信息工程大学）；Peng Cheng Laboratory（鹏城实验室）；University of New South Wales（新南威尔士大学）
This paper introduces a unified deep neural network (DNN)-based precoder for two-user multiple-input multiple-output (MIMO) networks with five objectives: data transmission, energy harvesting, simultaneous wireless information and power transfer, physical layer (PHY) security, and multicasting. First, a rotation-based precoding is developed to solve the above problems independently. Rotation-based precoding is new precoding and power allocation that beats existing solutions in PHY security and multicasting and is reliable in different antenna settings. Next, a DNN-based precoder is designed to…
In this paper, a cooperative multicast scheme that uses Randomized Distributed Space Time Codes (R-DSTC), along with packet level Forward Error Correction (FEC), is studied. Instead of sending source packets and/or parity packets through two hops using R-DSTC as proposed in our prior work, the new scheme delivers both source packets and parity packets using only one hop. After the source station (access point, AP) first sends all the source packets, the AP as well as all nodes that have received all source packets together send the parity packets using R-DSTC. As more parity packets are transm…
We study the joint unicast and multi-group multicast transmission in massive multiple-input-multiple-output (MIMO) systems. We consider a system model that accounts for channel estimation and pilot contamination, and derive achievable spectral efficiencies (SEs) for unicast and multicast user terminals (UTs), under maximum ratio transmission and zero-forcing precoding. For unicast transmission, our objective is to maximize the weighted sum SE of the unicast UTs, and for the multicast transmission, our objective is to maximize the minimum SE of the multicast UTs. These two objectives are couple…
In this paper, we investigate the joint beamforming and power splitting design problem in a base station (BS) cluster-based cloud radio access network (C-RAN) with multicast fronthaul, where users are jointly served by BSs within each cluster. Meanwhile, each user can simultaneously obtain information and energy from received signals. On this basis, under predefined minimum harvested energy of each user and maximum transmit power of each BS and central processor, we formulate a sum rate maximization problem by jointly optimizing multicast fronthaul beamforming, cooperative access beamforming a…
