The demand of massive access to the same multimedia content at the same time is one major challenge for next-generation cellular networks in densely-packed urban areas. The content-aware multicast transmission strategies provide promising solutions to such use cases involving many mobile users trying to fetch the same data. In this work, we consider multigroup multicast transmission with a common message (e.g., multimedia content), in which different multicast groups are interested along with their private multicast messages. We further assume that a relay helps the cellular base station (BS) disseminate multicast content to the users experiencing high path loss and/or blockage. We propose superposition and concatenated coding schemes, denoted by SC and CC, respectively, to transmit the common and private multicast messages. In order to maximize max-min fair (MMF) rates, we design a novel low-complexity alternating-optimization algorithm to compute transmit and relay precoders. We also propose rate-splitting (RS) alternatives of SC and CC schemes together with an iterative algorithm to derive dedicated transmit and relay precoders so as to maximize MMF rates. We rigorously evaluate the performance of the proposed transmission schemes and precoders, and verify the superiority of RS-based schemes in overloaded scenarios without any saturation with increasing signal-to-noise ratio.
We consider the problem of transmit beamforming to multiple cochannel multicast groups. The conventional approach is to beamform a designated data stream to each group, while treating potential inter-group interference as noise at the receivers. In overloaded systems where the number of transmit antennas is insufficient to perform interference nulling, we show that inter-group interference dominates at high SNRs, leading to a saturating max-min fair performance. We propose a rather unconventional approach to cope with this issue based on the concept of Rate-Splitting (RS). In particular, part …
Linear precoding exploits the spatial degrees of freedom offered by multi-antenna transmitters to serve multiple users over the same frequency resources. The present work focuses on simultaneously serving multiple groups of users, each with its own channel, by transmitting a stream of common symbols to each group. This scenario is known as physical layer multicasting to multiple co-channel groups. Extending the current state of the art in multigroup multicasting, the practical constraint of a maximum permitted power level radiated by each antenna is tackled herein. The considered per antenna p…
A multi-antenna transmitter that conveys independent sets of common data to distinct groups of users is herein considered, a model known as physical layer multicasting to multiple co-channel groups. In the recently proposed context of per-antenna power constrained multigroup multicasting, the present work focuses on a novel system design that aims at maximizing the total achievable throughput. Towards increasing the system sum rate, the available power resources need to be allocated to well conditioned groups of users. A detailed solution to tackle the elaborate sum rate maximization multigrou…
This paper studies the energy efficiency and sum rate trade-off for coordinated beamforming in multi-cell multi-user multigroup multicast multiple-input single-output systems. We first consider a conventional network energy efficiency maximization (EEmax) problem by jointly optimizing the transmit beamformers and antennas selected to be used in transmission. We also account for per-antenna maximum power constraints to avoid non-linear distortion in power amplifiers and user-specific minimum rate constraints to guarantee certain service levels and fairness. To be energy-efficient, transmit ante…
Existing methods for robust multigroup multicast beamforming obtain feasible points using semidefinite relaxation (SDR) and Gaussian randomization, and have high computational complexity. In this letter, we consider the robust multigroup multicast beamforming design to minimize the sum power (SP) or per-antenna power (PAP) under the signal-to-interference-plus-noise ratio (SINR) constraints and to maximize the worst-case SINR under the SP constraint or PAP constraints, respectively. The resulting optimization problems are challenging non-convex problems with infinitely many constraints. For ea…
A multi-antenna transmitter that conveys independent sets of common data to distinct groups of users is considered. This model is known as physical layer multicasting to multiple co-channel groups. In this context, the practical constraint of a maximum permitted power level radiated by each antenna is addressed. The per-antenna power constrained system is optimized in a maximum fairness sense with respect to predetermined quality of service weights. In other words, the worst scaled user is boosted by maximizing its weighted signal-to-interference plus noise ratio. A detailed solution to tackle…
This is a companion technical report of the main manuscript "Physical-Layer Multicasting by Stochastic Transmit Beamforming and Alamouti Space-Time Coding". The report serves to give detailed derivations of the achievable rate functions encountered in the main manuscript, which are too long to be included in the latter. In addition, more simulation results are presented to verify the viability of the multicast schemes developed in the main manuscript.
Large in the number of transmit elements, multi-antenna arrays with per-element limitations are in the focus of the present work. In this context, physical layer multigroup multicasting under per-antenna power constrains, is investigated herein. To address this complex optimization problem low-complexity alternatives to semi-definite relaxation are proposed. The goal is to optimize the per-antenna power constrained transmitter in a maximum fairness sense, which is formulated as a non-convex quadratically constrained quadratic problem. Therefore, the recently developed tool of feasible point pu…
In this paper, we consider multigroup multicast transmissions with different types of service messages in an overloaded multicarrier system, where the number of transmitter antennas is insufficient to mitigate all inter-group interference. We show that employing a rate-splitting based multiuser beamforming approach enables a simultaneous delivery of the multiple service messages over the same time-frequency resources in a non-orthogonal fashion. Such an approach, taking into account transmission power constraints which are inevitable in practice, outperforms classic beamforming methods as well…
This paper considers coordinated multicast beamforming in a multi-cell wireless network. Each multiantenna base station (BS) serves multiple groups of single antenna users by generating a single beam with common data per group. The aim is to minimize the sum power of BSs while satisfying user-specific SINR targets. We propose centralized and distributed multicast beamforming algorithms for multi-cell multigroup systems. The NP-hard multicast problem is tackled by approximating it as a convex problem using the standard semidefinite relaxation method. The resulting semidefinite program (SDP) can…
In this paper, we consider the problem of achieving max-min fairness amongst multiple co-channel multicast groups through transmit beamforming. We explicitly focus on overloaded scenarios in which the number of transmitting antennas is insufficient to neutralize all inter-group interference. Such scenarios are becoming increasingly relevant in the light of growing low-latency content delivery demands, and also commonly appear in multibeam satellite systems. We derive performance limits of classical beamforming strategies using DoF analysis unveiling their limitations; for example, rates satura…
Consider transceiver designs in a multiuser multi-input single-output (MISO) downlink channel, where the users are to receive the same data stream simultaneously. This problem, known as physical-layer multicasting, has drawn much interest. Presently, a popularized approach is transmit beamforming, in which the beamforming optimization is handled by a rank-one approximation method called semidefinite relaxation (SDR). SDR-based beamforming has been shown to be promising for a small or moderate number of users. This paper describes two new transceiver strategies for physical-layer multicasting. …
This paper considers coordinated multicast beamforming in a multi-cell multigroup multiple-input single-output system. Each base station (BS) serves multiple groups of users by forming a single beam with common information per group. We propose centralized and distributed beamforming algorithms for two different optimization targets. The first objective is to minimize the total transmission power of all the BSs while guaranteeing the user-specific minimum quality-of-service targets. The semidefinite relaxation (SDR) method is used to approximate the non-convex multicast problem as a semidefini…
This paper studies energy-efficient coordinated beamforming in multi-cell multi-user multigroup multicast multiple-input single-output systems. We aim at maximizing the network energy efficiency by taking into account the fact that some of the radio frequency chains can be switched off in order to save power. We consider the antenna specific maximum power constraints to avoid non-linear distortion in power amplifiers and user-specific quality of service (QoS) constraints to guarantee a certain QoS levels. We first introduce binary antenna selection variables and use the perspective formulation…
Optimal physical layer multicasting (PLM) is an NP-hard problem that for simplicity has been studied under idealistic assumptions, e.g., availability of perfect channel state information (CSI), both at the base station (BS) and at the user terminals (UTs). With the advent of massive multiple-input-multiple-output (MIMO), PLM has become more challenging, as the computational complexity of the precoder design is proportional to the number of BS antennas. In this paper, we address these issues by introducing computationally efficient precoders that account for practical CSI acquisition. We derive…
This work focuses on the promising Rate-Splitting Multiple Access (RSMA) and its beamforming design problem to achieve max-min fairness (MMF) among multiple co-channel multicast groups with imperfect channel state information at the transmitter (CSIT). Contrary to the conventional linear precoding (NoRS) that relies on fully treating any residual interference as noise, we consider a novel multigroup multicast beamforming strategy based on RSMA. RSMA relies on linearly precoded Rate-Splitting (RS) at the transmitter and Successive Interference Cancellation (SIC) at the receivers, and has recent…
This paper studies energy-efficient joint transmit and receive beamforming in multi-cell multi-user multiple-input multiple-output systems. We consider conventional network energy efficiency metric where the users can receive unicasting streams in addition to the group-specific common multicasting streams which have certain rate constraints. The goal is to use the transmission resources more efficiently to improve the energy efficiency, when the users are equipped with multiple antennas. Numerical results show the achieved energy efficiency gains by using the additional degrees of freedom of t…
The present work focuses on the forward link of a broadband multibeam satellite system that aggressively reuses the user link frequency resources. Two fundamental practical challenges, namely the need to frame multiple users per transmission and the per-antenna transmit power limitations, are addressed. To this end, the so-called frame-based precoding problem is optimally solved using the principles of physical layer multicasting to multiple co-channel groups under per-antenna constraints. In this context, a novel optimization problem that aims at maximizing the system sum rate under individua…
We study physical layer multicasting in multicell networks where each base station, equipped with multiple antennas, transmits a common message using a single beamformer to multiple users in the same cell. We investigate two coordinated beamforming designs: the quality-of-service (QoS) beamforming and the max-min SINR (signal-to-interference-plus-noise ratio) beamforming. The goal of the QoS beamforming is to minimize the total power consumption while guaranteeing that received SINR at each user is above a predetermined threshold. We present a necessary condition for the optimization problem t…
Recently, edge caching and multicasting arise as two promising technologies to support high-data-rate and low-latency delivery in wireless communication networks. In this paper, we design three transmission schemes aiming to minimize the delivery latency for cache-enabled multigroup multicasting networks. In particular, full caching bulk transmission scheme is first designed as a performance benchmark for the ideal situation where the caching capability of each enhanced remote radio head (eRRH) is sufficient large to cache all files. For the practical situation where the caching capability of …
This paper considers the application of non-orthogonal multiple access (NOMA) to a multi-user network with mixed multicasting and unicasting traffic. The proposed design of beamforming and power allocation ensures that the unicasting performance is improved while maintaining the reception reliability of multicasting. Both analytical and simulation results are provided to demonstrate that the use of the NOMA assisted multicast-unicast scheme yields a significant improvement in spectral efficiency compared to orthogonal multiple access (OMA) schemes which realize multicasting and unicasting serv…
Rate-splitting multiple access (RSMA), relying on linearly precoded rate-splitting (RS) at the transmitter and successive interference cancellation (SIC) at the receivers has emerged as a powerful and flexible multiple access strategy for downlink multi-user multi-antenna systems. Through message splitting and the transmission of both common and private messages, RSMA has been demonstrated to be a robust interference management strategy which enables partially decoding interference and partially treating interference as noise. In this work, we consider the application of RSMA in a multigroup m…
In this paper, we consider a joint unicast and multi-group multicast cell-free distributed massive multiple-input multiple-output (MIMO) system, while accounting for co-pilot assignment strategy based channel estimation, pilot contamination and different precoding schemes. Under the co-pilot assignment strategy, we derive the minimum-mean-square error (MMSE) channel state information (CSI) estimation for unicast and multicast users. Given the acquired CSI, the closed-form expressions for downlink achievable rates with maximum ratio transmission (MRT), zero-forcing (ZF) and MMSE beamforming are…
Intelligent reflecting surface (IRS) has recently been envisioned to offer unprecedented massive multiple-input multiple-output (MIMO)-like gains by deploying large-scale and low-cost passive reflection elements. By adjusting the reflection coefficients, the IRS can change the phase shifts on the impinging electromagnetic waves so that it can smartly reconfigure the signal propagation environment and enhance the power of the desired received signal or suppress the interference signal. In this paper, we consider downlink multigroup multicast communication systems assisted by an IRS. We aim for …
Device-to-device (D2D) aided beamforming for coded caching is considered in finite signal-to-noise ratio regime. A novel beamforming scheme is proposed where the local cache content exchange among nearby users is exploited. The transmission is split into two phases: local D2D content exchange and downlink transmission. In the D2D phase, users can autonomously share content with the adjacent users. The downlink phase utilizes multicast beamforming to simultaneously serve all users to fulfill the remaining content requests. We first explain the main procedure via two simple examples and then pre…
Multicast beamforming is known to improve spectral efficiency. However, its benefits and challenges for hybrid precoders design in millimeter-wave (mmWave) systems remain understudied. To this end, this paper investigates the first joint design of hybrid transmit precoders (with an arbitrary number of finite-resolution phase shifts) and receive combiners for mmWave multi-group multicasting. Our proposed design leverages semidefinite relaxation (SDR), alternating optimization and Cholesky matrix factorization to sequentially optimize the digital/analog precoders at the transmitter and the combi…
We consider multi-group multicast precoding designs for cell-free massive multiple-input multiple-output (MIMO) systems. To optimize the transmit and receive beamforming strategies, we focus on minimizing the sum of the maximum mean squared errors (MSEs) over the multicast groups, which is then approximated with the sum MSE to simplify the computation and signaling. We adopt an iterative bi-directional training scheme with uplink and downlink precoded pilots to cooperatively design the multi-group multicast precoders at each base station and the combiners at each user equipment in a distribute…
This paper presents a content-centric transmission design in a cloud radio access network (cloud RAN) by incorporating multicasting and caching. Users requesting a same content form a multicast group and are served by a same cluster of base stations (BSs) cooperatively. Each BS has a local cache and it acquires the requested contents either from its local cache or from the central processor (CP) via backhaul links. We investigate the dynamic content-centric BS clustering and multicast beamforming with respect to both channel condition and caching status. We first formulate a mixed-integer nonl…
This work studies multigroup multicasting transmission in cloud radio access networks (C-RANs) with simultaneous wireless information and power transfer, where densely packed remote radio heads (RRHs) cooperatively provide information and energy services for information users (IUs) and energy users (EUs), respectively. To maximize the weighted sum rate (WSR) of information services while satisfying the energy harvesting levels at EUs, an optimization of joint beamforming design for the fronthaul and access links is formulated, which is however neither smooth nor convex and is indeed NP-hard. T…
Multicast transmission and wireless caching are effective ways of reducing air and backhaul traffic load in wireless networks. This paper proposes to incorporate these two key ideas for content-centric multicast transmission in a cloud radio access network (RAN) where multiple base stations (BSs) are connected to a central processor (CP) via finite-capacity backhaul links. Each BS has a cache with finite storage size and is equipped with multiple antennas. The BSs cooperatively transmit contents, which are either stored in the local cache or fetched from the CP, to multiple users in the networ…
This paper studies the beamforming design problem to achieve max-min fairness (MMF) in multibeam satellite communications. Contrary to the conventional linear precoding (NoRS) that relies on fully treating any residual interference as noise, we consider a novel multibeam multicast beamforming strategy based on Rate-Splitting Multiple Access (RSMA). RSMA relies on linearly precoded ratesplitting (RS) at the transmitter and Successive Interference Cancellation (SIC) at receivers to enable a flexible framework for non-orthogonal transmission and robust interbeam interference management. Aiming at…
In this paper, we study the amplify-and-forward (AF) schemes in two-hop one-way relay networks. In particular, we consider the multigroup multicast transmission between long-distance users. Given that perfect channel state information is perceived, our goal is to design the AF process so that the max-min-fair (MMF) signal-to-interference-plus-noise ratio (SINR) is optimized subject to generalized power constraints. We propose a rank-two beamformed Alamouti (BFA) AF scheme and formulate the corresponding AF design problem as a \emph{two-variable} fractional quadratically-constrained quadratic p…
A multi-antenna broadcast channel scenario is considered where a base station delivers contents to cache-enabled user terminals. A joint design of coded caching (CC) and multigroup multicast beamforming is proposed to benefit from spatial multiplexing gain, improved interference management and the global CC gain, simultaneously. The developed general content delivery strategies utilize the multiantenna multicasting opportunities provided by the CC technique while optimally balancing the detrimental impact of both noise and inter-stream interference from coded messages transmitted in parallel. …
