Linear precoding exploits the spatial degrees of freedom offered by multi-antenna transmitters to serve multiple users over the same frequency resources. The present work focuses on simultaneously serving multiple groups of users, each with its own channel, by transmitting a stream of common symbols to each group. This scenario is known as physical layer multicasting to multiple co-channel groups. Extending the current state of the art in multigroup multicasting, the practical constraint of a maximum permitted power level radiated by each antenna is tackled herein. The considered per antenna power constrained system is optimized in a maximum fairness sense. In other words, the optimization aims at favoring the worst user by maximizing the minimum rate. This Max-Min Fair criterion is imperative in multicast systems, where the performance of all the receivers listening to the same multicast is dictated by the worst rate in the group. An analytic framework to tackle the Max-Min Fair multigroup multicasting scenario under per antenna power constraints is therefore derived. Numerical results display the accuracy of the proposed solution and provide insights to the performance of a per antenna power constrained system.
A multi-antenna transmitter that conveys independent sets of common data to distinct groups of users is herein considered, a model known as physical layer multicasting to multiple co-channel groups. In the recently proposed context of per-antenna power constrained multigroup multicasting, the present work focuses on a novel system design that aims at maximizing the total achievable throughput. Towards increasing the system sum rate, the available power resources need to be allocated to well conditioned groups of users. A detailed solution to tackle the elaborate sum rate maximization multigrou…
Existing methods for robust multigroup multicast beamforming obtain feasible points using semidefinite relaxation (SDR) and Gaussian randomization, and have high computational complexity. In this letter, we consider the robust multigroup multicast beamforming design to minimize the sum power (SP) or per-antenna power (PAP) under the signal-to-interference-plus-noise ratio (SINR) constraints and to maximize the worst-case SINR under the SP constraint or PAP constraints, respectively. The resulting optimization problems are challenging non-convex problems with infinitely many constraints. For ea…
A multi-antenna transmitter that conveys independent sets of common data to distinct groups of users is considered. This model is known as physical layer multicasting to multiple co-channel groups. In this context, the practical constraint of a maximum permitted power level radiated by each antenna is addressed. The per-antenna power constrained system is optimized in a maximum fairness sense with respect to predetermined quality of service weights. In other words, the worst scaled user is boosted by maximizing its weighted signal-to-interference plus noise ratio. A detailed solution to tackle…
We consider the problem of transmit beamforming to multiple cochannel multicast groups. The conventional approach is to beamform a designated data stream to each group, while treating potential inter-group interference as noise at the receivers. In overloaded systems where the number of transmit antennas is insufficient to perform interference nulling, we show that inter-group interference dominates at high SNRs, leading to a saturating max-min fair performance. We propose a rather unconventional approach to cope with this issue based on the concept of Rate-Splitting (RS). In particular, part …
The demand of massive access to the same multimedia content at the same time is one major challenge for next-generation cellular networks in densely-packed urban areas. The content-aware multicast transmission strategies provide promising solutions to such use cases involving many mobile users trying to fetch the same data. In this work, we consider multigroup multicast transmission with a common message (e.g., multimedia content), in which different multicast groups are interested along with their private multicast messages. We further assume that a relay helps the cellular base station (BS) …
Large in the number of transmit elements, multi-antenna arrays with per-element limitations are in the focus of the present work. In this context, physical layer multigroup multicasting under per-antenna power constrains, is investigated herein. To address this complex optimization problem low-complexity alternatives to semi-definite relaxation are proposed. The goal is to optimize the per-antenna power constrained transmitter in a maximum fairness sense, which is formulated as a non-convex quadratically constrained quadratic problem. Therefore, the recently developed tool of feasible point pu…
In this paper, we consider multigroup multicast transmissions with different types of service messages in an overloaded multicarrier system, where the number of transmitter antennas is insufficient to mitigate all inter-group interference. We show that employing a rate-splitting based multiuser beamforming approach enables a simultaneous delivery of the multiple service messages over the same time-frequency resources in a non-orthogonal fashion. Such an approach, taking into account transmission power constraints which are inevitable in practice, outperforms classic beamforming methods as well…
This paper considers coordinated multicast beamforming in a multi-cell wireless network. Each multiantenna base station (BS) serves multiple groups of single antenna users by generating a single beam with common data per group. The aim is to minimize the sum power of BSs while satisfying user-specific SINR targets. We propose centralized and distributed multicast beamforming algorithms for multi-cell multigroup systems. The NP-hard multicast problem is tackled by approximating it as a convex problem using the standard semidefinite relaxation method. The resulting semidefinite program (SDP) can…
In this paper, we consider a joint unicast and multi-group multicast cell-free distributed massive multiple-input multiple-output (MIMO) system, while accounting for co-pilot assignment strategy based channel estimation, pilot contamination and different precoding schemes. Under the co-pilot assignment strategy, we derive the minimum-mean-square error (MMSE) channel state information (CSI) estimation for unicast and multicast users. Given the acquired CSI, the closed-form expressions for downlink achievable rates with maximum ratio transmission (MRT), zero-forcing (ZF) and MMSE beamforming are…
Rate-splitting multiple access (RSMA), relying on linearly precoded rate-splitting (RS) at the transmitter and successive interference cancellation (SIC) at the receivers has emerged as a powerful and flexible multiple access strategy for downlink multi-user multi-antenna systems. Through message splitting and the transmission of both common and private messages, RSMA has been demonstrated to be a robust interference management strategy which enables partially decoding interference and partially treating interference as noise. In this work, we consider the application of RSMA in a multigroup m…
This work focuses on the promising Rate-Splitting Multiple Access (RSMA) and its beamforming design problem to achieve max-min fairness (MMF) among multiple co-channel multicast groups with imperfect channel state information at the transmitter (CSIT). Contrary to the conventional linear precoding (NoRS) that relies on fully treating any residual interference as noise, we consider a novel multigroup multicast beamforming strategy based on RSMA. RSMA relies on linearly precoded Rate-Splitting (RS) at the transmitter and Successive Interference Cancellation (SIC) at the receivers, and has recent…
We study joint unicast and multigroup multicast transmission in single-cell massive multiple-input-multiple-output (MIMO) systems, under maximum ratio transmission. For the unicast transmission, the objective is to maximize the weighted sum spectral efficiency (SE) of the unicast user terminals (UTs) and for the multicast transmission the objective is to maximize the minimum SE of the multicast UTs. These two problems are coupled to each other in a conflicting manner, due to their shared power resource and interference. To address this, we formulate a multiobjective optimization problem (MOOP)…
This paper studies the joint design of user grouping, scheduling (or admission control) and precoding to optimize energy efficiency (EE) for multigroup multicast scenarios in single-cell multiuser MISO downlink channels. Noticing that the existing definition of EE fails to account for group sizes, a new metric called multicast energy efficiency (MEE) is proposed. In this context, the joint design is considered for the maximization of MEE, EE, and scheduled users. Firstly, with the help of binary variables (associated with grouping and scheduling) the joint design problem is formulated as a mix…
Optimal physical layer multicasting (PLM) is an NP-hard problem that for simplicity has been studied under idealistic assumptions, e.g., availability of perfect channel state information (CSI), both at the base station (BS) and at the user terminals (UTs). With the advent of massive multiple-input-multiple-output (MIMO), PLM has become more challenging, as the computational complexity of the precoder design is proportional to the number of BS antennas. In this paper, we address these issues by introducing computationally efficient precoders that account for practical CSI acquisition. We derive…
The present work focuses on the forward link of a broadband multibeam satellite system that aggressively reuses the user link frequency resources. Two fundamental practical challenges, namely the need to frame multiple users per transmission and the per-antenna transmit power limitations, are addressed. To this end, the so-called frame-based precoding problem is optimally solved using the principles of physical layer multicasting to multiple co-channel groups under per-antenna constraints. In this context, a novel optimization problem that aims at maximizing the system sum rate under individua…
Intelligent reflecting surfaces (IRSs) have shown huge advantages in many potential use cases and thus have been considered a promising candidate for next-generation wireless systems. In this paper, we consider an IRS-assisted multigroup multicast (IRS-MGMC) system in a multiple-input single-output (MISO) scenario, for which the related existing literature is rather limited. In particular, we aim to jointly design the transmit beamformers and IRS phase shifts to maximize the sum rate of the system under consideration. In order to obtain a numerically efficient solution to the formulated non-co…
In this paper, we consider the problem of achieving max-min fairness amongst multiple co-channel multicast groups through transmit beamforming. We explicitly focus on overloaded scenarios in which the number of transmitting antennas is insufficient to neutralize all inter-group interference. Such scenarios are becoming increasingly relevant in the light of growing low-latency content delivery demands, and also commonly appear in multibeam satellite systems. We derive performance limits of classical beamforming strategies using DoF analysis unveiling their limitations; for example, rates satura…
This paper considers coordinated multicast beamforming in a multi-cell multigroup multiple-input single-output system. Each base station (BS) serves multiple groups of users by forming a single beam with common information per group. We propose centralized and distributed beamforming algorithms for two different optimization targets. The first objective is to minimize the total transmission power of all the BSs while guaranteeing the user-specific minimum quality-of-service targets. The semidefinite relaxation (SDR) method is used to approximate the non-convex multicast problem as a semidefini…
This paper studies energy-efficient coordinated beamforming in multi-cell multi-user multigroup multicast multiple-input single-output systems. We aim at maximizing the network energy efficiency by taking into account the fact that some of the radio frequency chains can be switched off in order to save power. We consider the antenna specific maximum power constraints to avoid non-linear distortion in power amplifiers and user-specific quality of service (QoS) constraints to guarantee a certain QoS levels. We first introduce binary antenna selection variables and use the perspective formulation…
In this paper, we consider a two-hop one-way relay network for multigroup multicast transmission between long-distance users, in which the relay is equipped with multiple antennas, while the transmitters and receivers are all with a single antenna. Assuming that perfect channel state information is available, we study amplify-and-forward (AF) schemes that aim at optimizing the max-min-fair (MMF) rate. We begin by considering the classic beamformed AF (BF-AF) scheme, whose corresponding MMF design problem can be formulated as a rank-constrained fractional semidefinite program (SDP). We show tha…
This paper studies the energy efficiency and sum rate trade-off for coordinated beamforming in multi-cell multi-user multigroup multicast multiple-input single-output systems. We first consider a conventional network energy efficiency maximization (EEmax) problem by jointly optimizing the transmit beamformers and antennas selected to be used in transmission. We also account for per-antenna maximum power constraints to avoid non-linear distortion in power amplifiers and user-specific minimum rate constraints to guarantee certain service levels and fairness. To be energy-efficient, transmit ante…
Intelligent reflecting surface (IRS) has recently been envisioned to offer unprecedented massive multiple-input multiple-output (MIMO)-like gains by deploying large-scale and low-cost passive reflection elements. By adjusting the reflection coefficients, the IRS can change the phase shifts on the impinging electromagnetic waves so that it can smartly reconfigure the signal propagation environment and enhance the power of the desired received signal or suppress the interference signal. In this paper, we consider downlink multigroup multicast communication systems assisted by an IRS. We aim for …
This is a companion technical report of the main manuscript "Physical-Layer Multicasting by Stochastic Transmit Beamforming and Alamouti Space-Time Coding". The report serves to give detailed derivations of the achievable rate functions encountered in the main manuscript, which are too long to be included in the latter. In addition, more simulation results are presented to verify the viability of the multicast schemes developed in the main manuscript.
We study physical layer multicasting in multicell networks where each base station, equipped with multiple antennas, transmits a common message using a single beamformer to multiple users in the same cell. We investigate two coordinated beamforming designs: the quality-of-service (QoS) beamforming and the max-min SINR (signal-to-interference-plus-noise ratio) beamforming. The goal of the QoS beamforming is to minimize the total power consumption while guaranteeing that received SINR at each user is above a predetermined threshold. We present a necessary condition for the optimization problem t…
The demand for providing multicast services in cellular networks is continuously and fastly increasing. In this work, we propose a non-orthogonal transmission framework based on layered-division multiplexing (LDM) to support multicast and unicast services concurrently in cooperative multi-cell cellular networks with limited backhaul capacity. We adopt a two-layer LDM structure where the first layer is intended for multicast services, the second layer is for unicast services, and the two layers are superposed with different beamformers. Each user decodes the multicast message first, subtracts i…
Consider transceiver designs in a multiuser multi-input single-output (MISO) downlink channel, where the users are to receive the same data stream simultaneously. This problem, known as physical-layer multicasting, has drawn much interest. Presently, a popularized approach is transmit beamforming, in which the beamforming optimization is handled by a rank-one approximation method called semidefinite relaxation (SDR). SDR-based beamforming has been shown to be promising for a small or moderate number of users. This paper describes two new transceiver strategies for physical-layer multicasting. …
This paper studies energy-efficient joint transmit and receive beamforming in multi-cell multi-user multiple-input multiple-output systems. We consider conventional network energy efficiency metric where the users can receive unicasting streams in addition to the group-specific common multicasting streams which have certain rate constraints. The goal is to use the transmission resources more efficiently to improve the energy efficiency, when the users are equipped with multiple antennas. Numerical results show the achieved energy efficiency gains by using the additional degrees of freedom of t…
One key feature of massive multiple-input multiple-output systems is the large number of antennas and users. As a result, reducing the computational complexity of beamforming design becomes imperative. To this end, the goal of this paper is to achieve a lower complexity order than that of existing beamforming methods, via the parallel accelerated random coordinate descent (ARCD). However, it is known that ARCD is only applicable when the problem is convex, smooth, and separable. In contrast, the beamforming design problem is nonconvex, nonsmooth, and nonseparable. Despite these challenges, thi…
Multicast beamforming is a key technology for next-generation wireless cellular networks to support high-rate content distribution services. In this paper, the coordinated downlink multicast beamforming design in multicell networks is considered. The goal is to maximize the minimum signal-to-interference-plus-noise ratio of all users under individual base station power constraints. We exploit the fractional form of the objective function and geometric properties of the con-straints to reformulate the problem as a parametric manifold optimization program. Afterwards we propose a low-complexity …
Multicast transmission and wireless caching are effective ways of reducing air and backhaul traffic load in wireless networks. This paper proposes to incorporate these two key ideas for content-centric multicast transmission in a cloud radio access network (RAN) where multiple base stations (BSs) are connected to a central processor (CP) via finite-capacity backhaul links. Each BS has a cache with finite storage size and is equipped with multiple antennas. The BSs cooperatively transmit contents, which are either stored in the local cache or fetched from the CP, to multiple users in the networ…
In this paper, we investigate the joint beamforming and power splitting design problem in a base station (BS) cluster-based cloud radio access network (C-RAN) with multicast fronthaul, where users are jointly served by BSs within each cluster. Meanwhile, each user can simultaneously obtain information and energy from received signals. On this basis, under predefined minimum harvested energy of each user and maximum transmit power of each BS and central processor, we formulate a sum rate maximization problem by jointly optimizing multicast fronthaul beamforming, cooperative access beamforming a…
This paper presents a content-centric transmission design in a cloud radio access network (cloud RAN) by incorporating multicasting and caching. Users requesting a same content form a multicast group and are served by a same cluster of base stations (BSs) cooperatively. Each BS has a local cache and it acquires the requested contents either from its local cache or from the central processor (CP) via backhaul links. We investigate the dynamic content-centric BS clustering and multicast beamforming with respect to both channel condition and caching status. We first formulate a mixed-integer nonl…
This paper considers the multi-group multicast beamforming optimization problem, for which the optimal solution has been unknown due to the non-convex and NP-hard nature of the problem. By utilizing the successive convex approximation numerical method and Lagrangian duality, we obtain the optimal multicast beamforming solution structure for both the quality-of-service (QoS) problem and the max-min fair (MMF) problem. The optimal structure brings valuable insights into multicast beamforming: We show that the notion of uplink-downlink duality can be generalized to the multicast beamforming probl…
In this paper, we consider multi-quality multicast beamforming of a video stream from a multi-antenna base station (BS) to multiple single-antenna users receiving different qualities of the same video stream, via scalable video coding (SVC). Leveraging the layered structure of SVC and exploiting superposition coding (SC) as well as successive interference cancelation (SIC), we propose a layer-based multi-quality multicast beamforming scheme. To reduce the complexity, we also propose a quality-based multi-quality multicast beamforming scheme, which further utilizes the layered structure of SVC …
In this paper, we investigate the network power minimization problem for the multicast cloud radio access network (Cloud-RAN) with imperfect channel state information (CSI). The key observation is that network power minimization can be achieved by adaptively selecting active remote radio heads (RRHs) via controlling the group-sparsity structure of the beamforming vector. However, this yields a non-convex combinatorial optimization problem, for which we propose a three-stage robust group sparse beamforming algorithm. In the first stage, a quadratic variational formulation of the weighted mixed …
Multi-group multicast beamforming in wireless systems with large antenna arrays and massive audience is investigated in this paper. Multicast beamforming design is a well-known non-convex quadratically constrained quadratic programming (QCQP) problem. A conventional method to tackle this problem is to approximate it as a semi-definite programming problem via semi-definite relaxation, whose performance, however, deteriorates considerably as the number of per-group users goes large. A recent attempt is to apply convex-concave procedure (CCP) to find a stationary solution by treating it as a diff…
This paper studies the joint multicast beamforming and user scheduling problem, with the objective of minimizing total transmitting power across multiple channels by jointly assigning each user to appropriate channel and designing multicast beamformer for each channel. The problem of interest is formulated in two different optimization problems, a mixed binary quadratically constrained quadratic program and a highly-structured nonsmooth program. Two different algorithms, based on convex relaxation and convex restriction, respectively, are proposed to solve the problem. The performance ratio be…
To develop a low-complexity multicast beamforming method for millimeter wave communications, we first propose a channel gain estimation method in this article. We use the beam sweeping to find the best codeword and its two neighboring codewords to form a composite beam. We then estimate the channel gain based on the composite beam, which is computed off-line by minimizing the variance of beam gain within beam coverage. With the estimated channel gain, we propose a multicast beamforming design method under the max-min fair (MMF) criterion. To reduce the computational complexity, we divide the l…
In this paper, we propose a cooperative approach to improve the security of both primary and secondary systems in cognitive radio multicast communications. During their access to the frequency spectrum licensed to the primary users, the secondary unlicensed users assist the primary system in fortifying security by sending a jamming noise to the eavesdroppers, while simultaneously protect themselves from eavesdropping. The main objective of this work is to maximize the secrecy rate of the secondary system, while adhering to all individual primary users' secrecy rate constraints. In the case of …
In this paper, assuming multi-antenna transmitter and receivers, we consider multicast beamformer design for the weighted max-min-fairness (WMMF) problem in a multi-stream multi-group communication setup. Unlike the single-stream scenario, the WMMF objective in this setup is not equivalent to maximizing the minimum weighted SINR due to the summation over the rates of multiple streams. Therefore, the non-convex problem at hand is first approximated with a convex one and then solved using Karush-Kuhn-Tucker (KKT) conditions. Then, a practically appealing closed-form solution is derived, as a fun…
Nagoya Institute of Technology（名古屋工业大学）；RIKEN Center for Advanced Intelligence Project（理化学研究所先进智能项目中心）
Multicast beamforming is a promising technique for multicast communication. Providing an efficient and powerful beamforming design algorithm is a crucial issue because multicast beamforming problems such as a max-min-fair problem are NP-hard in general. Recently, deep learning-based approaches have been proposed for beamforming design. Although these approaches using deep neural networks exhibit reasonable performance gain compared with conventional optimization-based algorithms, their scalability is an emerging problem for large systems in which beamforming design becomes a more demanding tas…
Device-to-device (D2D) aided beamforming for coded caching is considered in finite signal-to-noise ratio regime. A novel beamforming scheme is proposed where the local cache content exchange among nearby users is exploited. The transmission is split into two phases: local D2D content exchange and downlink transmission. In the D2D phase, users can autonomously share content with the adjacent users. The downlink phase utilizes multicast beamforming to simultaneously serve all users to fulfill the remaining content requests. We first explain the main procedure via two simple examples and then pre…
Consider the single-group multicast beamforming problem, where multiple users receive the same data stream simultaneously from a single transmitter. The problem is NP-hard and all existing algorithms for the problem either find suboptimal approximate or local stationary solutions. In this paper, we propose an efficient branch-and-bound algorithm for the problem that is guaranteed to find its global solution. To the best of our knowledge, our proposed algorithm is the first tailored global algorithm for the single-group multicast beamforming problem. Simulation results show that our proposed al…
This paper considers the (NP-)hard problem of joint multicast beamforming and antenna selection. Prior work has focused on using Semi-Definite relaxation (SDR) techniques in an attempt to obtain a high quality sub-optimal solution. However, SDR suffers from the drawback of having high computational complexity, as SDR lifts the problem to higher dimensional space, effectively squaring the number of variables. This paper proposes a high performance, low complexity Successive Convex Approximation (SCA) algorithm for max-min SNR "fair" joint multicast beamforming and antenna selection under a sum …
Rate-splitting multiple access (RSMA) has been recognized as a promising physical layer strategy for 6G. Motivated by ever increasing popularity of cache-enabled content delivery in wireless communications, this paper proposes an innovative multigroup multicast transmission scheme based on RSMA for cache-aided cloud-radio access networks (C-RAN). Our proposed scheme not only exploits the properties of content-centric communications and local caching at the base stations (BSs), but also incorporates RSMA to better manage interference in multigroup multicast transmission with statistical channel…
In this paper, we propose an iterative algorithm to address the nonconvex multi-group multicast beamforming problem with quality-of-service constraints and per-antenna power constraints. We formulate a convex relaxation of the problem as a semidefinite program in a real Hilbert space, which allows us to approximate a point in the feasible set by iteratively applying a bounded perturbation resilient fixed-point mapping. Inspired by the superiorization methodology, we use this mapping as a basic algorithm, and we add in each iteration a small perturbation with the intent to reduce the objective …
In the present work, a multibeam satellite that employs aggressive frequency reuse towards increasing the offered throughput is considered. Focusing on the forward link, the goal is to employ multi-antenna signal processing techniques, namely linear precoding, to manage the inter-beam interferences. In this context, fundamental practical limitations, namely the rigid framing structure of satellite communication standards and the on-board per-antenna power constraints, are herein considered. Therefore, the concept of optimal frame based precoding under per-antenna constraints, is discussed. Thi…
