The present work focuses on the forward link of a broadband multibeam satellite system that aggressively reuses the user link frequency resources. Two fundamental practical challenges, namely the need to frame multiple users per transmission and the per-antenna transmit power limitations, are addressed. To this end, the so-called frame-based precoding problem is optimally solved using the principles of physical layer multicasting to multiple co-channel groups under per-antenna constraints. In this context, a novel optimization problem that aims at maximizing the system sum rate under individual power constraints is proposed. Added to that, the formulation is further extended to include availability constraints. As a result, the high gains of the sum rate optimal design are traded off to satisfy the stringent availability requirements of satellite systems. Moreover, the throughput maximization with a granular spectral efficiency versus SINR function, is formulated and solved. Finally, a multicast-aware user scheduling policy, based on the channel state information, is developed. Thus, substantial multiuser diversity gains are gleaned. Numerical results over a realistic simulation environment exhibit as much as 30% gains over conventional systems, even for 7 users per frame, without modifying the framing structure of legacy communication standards.
A multi-antenna transmitter that conveys independent sets of common data to distinct groups of users is herein considered, a model known as physical layer multicasting to multiple co-channel groups. In the recently proposed context of per-antenna power constrained multigroup multicasting, the present work focuses on a novel system design that aims at maximizing the total achievable throughput. Towards increasing the system sum rate, the available power resources need to be allocated to well conditioned groups of users. A detailed solution to tackle the elaborate sum rate maximization multigrou…
Existing methods for robust multigroup multicast beamforming obtain feasible points using semidefinite relaxation (SDR) and Gaussian randomization, and have high computational complexity. In this letter, we consider the robust multigroup multicast beamforming design to minimize the sum power (SP) or per-antenna power (PAP) under the signal-to-interference-plus-noise ratio (SINR) constraints and to maximize the worst-case SINR under the SP constraint or PAP constraints, respectively. The resulting optimization problems are challenging non-convex problems with infinitely many constraints. For ea…
A multi-antenna transmitter that conveys independent sets of common data to distinct groups of users is considered. This model is known as physical layer multicasting to multiple co-channel groups. In this context, the practical constraint of a maximum permitted power level radiated by each antenna is addressed. The per-antenna power constrained system is optimized in a maximum fairness sense with respect to predetermined quality of service weights. In other words, the worst scaled user is boosted by maximizing its weighted signal-to-interference plus noise ratio. A detailed solution to tackle…
Linear precoding exploits the spatial degrees of freedom offered by multi-antenna transmitters to serve multiple users over the same frequency resources. The present work focuses on simultaneously serving multiple groups of users, each with its own channel, by transmitting a stream of common symbols to each group. This scenario is known as physical layer multicasting to multiple co-channel groups. Extending the current state of the art in multigroup multicasting, the practical constraint of a maximum permitted power level radiated by each antenna is tackled herein. The considered per antenna p…
We consider the problem of transmit beamforming to multiple cochannel multicast groups. The conventional approach is to beamform a designated data stream to each group, while treating potential inter-group interference as noise at the receivers. In overloaded systems where the number of transmit antennas is insufficient to perform interference nulling, we show that inter-group interference dominates at high SNRs, leading to a saturating max-min fair performance. We propose a rather unconventional approach to cope with this issue based on the concept of Rate-Splitting (RS). In particular, part …
The demand of massive access to the same multimedia content at the same time is one major challenge for next-generation cellular networks in densely-packed urban areas. The content-aware multicast transmission strategies provide promising solutions to such use cases involving many mobile users trying to fetch the same data. In this work, we consider multigroup multicast transmission with a common message (e.g., multimedia content), in which different multicast groups are interested along with their private multicast messages. We further assume that a relay helps the cellular base station (BS) …
Large in the number of transmit elements, multi-antenna arrays with per-element limitations are in the focus of the present work. In this context, physical layer multigroup multicasting under per-antenna power constrains, is investigated herein. To address this complex optimization problem low-complexity alternatives to semi-definite relaxation are proposed. The goal is to optimize the per-antenna power constrained transmitter in a maximum fairness sense, which is formulated as a non-convex quadratically constrained quadratic problem. Therefore, the recently developed tool of feasible point pu…
In this paper, we consider multigroup multicast transmissions with different types of service messages in an overloaded multicarrier system, where the number of transmitter antennas is insufficient to mitigate all inter-group interference. We show that employing a rate-splitting based multiuser beamforming approach enables a simultaneous delivery of the multiple service messages over the same time-frequency resources in a non-orthogonal fashion. Such an approach, taking into account transmission power constraints which are inevitable in practice, outperforms classic beamforming methods as well…
This paper considers coordinated multicast beamforming in a multi-cell wireless network. Each multiantenna base station (BS) serves multiple groups of single antenna users by generating a single beam with common data per group. The aim is to minimize the sum power of BSs while satisfying user-specific SINR targets. We propose centralized and distributed multicast beamforming algorithms for multi-cell multigroup systems. The NP-hard multicast problem is tackled by approximating it as a convex problem using the standard semidefinite relaxation method. The resulting semidefinite program (SDP) can…
In this paper, we consider a joint unicast and multi-group multicast cell-free distributed massive multiple-input multiple-output (MIMO) system, while accounting for co-pilot assignment strategy based channel estimation, pilot contamination and different precoding schemes. Under the co-pilot assignment strategy, we derive the minimum-mean-square error (MMSE) channel state information (CSI) estimation for unicast and multicast users. Given the acquired CSI, the closed-form expressions for downlink achievable rates with maximum ratio transmission (MRT), zero-forcing (ZF) and MMSE beamforming are…
Rate-splitting multiple access (RSMA), relying on linearly precoded rate-splitting (RS) at the transmitter and successive interference cancellation (SIC) at the receivers has emerged as a powerful and flexible multiple access strategy for downlink multi-user multi-antenna systems. Through message splitting and the transmission of both common and private messages, RSMA has been demonstrated to be a robust interference management strategy which enables partially decoding interference and partially treating interference as noise. In this work, we consider the application of RSMA in a multigroup m…
This work focuses on the promising Rate-Splitting Multiple Access (RSMA) and its beamforming design problem to achieve max-min fairness (MMF) among multiple co-channel multicast groups with imperfect channel state information at the transmitter (CSIT). Contrary to the conventional linear precoding (NoRS) that relies on fully treating any residual interference as noise, we consider a novel multigroup multicast beamforming strategy based on RSMA. RSMA relies on linearly precoded Rate-Splitting (RS) at the transmitter and Successive Interference Cancellation (SIC) at the receivers, and has recent…
We study joint unicast and multigroup multicast transmission in single-cell massive multiple-input-multiple-output (MIMO) systems, under maximum ratio transmission. For the unicast transmission, the objective is to maximize the weighted sum spectral efficiency (SE) of the unicast user terminals (UTs) and for the multicast transmission the objective is to maximize the minimum SE of the multicast UTs. These two problems are coupled to each other in a conflicting manner, due to their shared power resource and interference. To address this, we formulate a multiobjective optimization problem (MOOP)…
This paper studies the joint design of user grouping, scheduling (or admission control) and precoding to optimize energy efficiency (EE) for multigroup multicast scenarios in single-cell multiuser MISO downlink channels. Noticing that the existing definition of EE fails to account for group sizes, a new metric called multicast energy efficiency (MEE) is proposed. In this context, the joint design is considered for the maximization of MEE, EE, and scheduled users. Firstly, with the help of binary variables (associated with grouping and scheduling) the joint design problem is formulated as a mix…
Optimal physical layer multicasting (PLM) is an NP-hard problem that for simplicity has been studied under idealistic assumptions, e.g., availability of perfect channel state information (CSI), both at the base station (BS) and at the user terminals (UTs). With the advent of massive multiple-input-multiple-output (MIMO), PLM has become more challenging, as the computational complexity of the precoder design is proportional to the number of BS antennas. In this paper, we address these issues by introducing computationally efficient precoders that account for practical CSI acquisition. We derive…
Intelligent reflecting surfaces (IRSs) have shown huge advantages in many potential use cases and thus have been considered a promising candidate for next-generation wireless systems. In this paper, we consider an IRS-assisted multigroup multicast (IRS-MGMC) system in a multiple-input single-output (MISO) scenario, for which the related existing literature is rather limited. In particular, we aim to jointly design the transmit beamformers and IRS phase shifts to maximize the sum rate of the system under consideration. In order to obtain a numerically efficient solution to the formulated non-co…
In this paper, we consider the problem of achieving max-min fairness amongst multiple co-channel multicast groups through transmit beamforming. We explicitly focus on overloaded scenarios in which the number of transmitting antennas is insufficient to neutralize all inter-group interference. Such scenarios are becoming increasingly relevant in the light of growing low-latency content delivery demands, and also commonly appear in multibeam satellite systems. We derive performance limits of classical beamforming strategies using DoF analysis unveiling their limitations; for example, rates satura…
This paper considers coordinated multicast beamforming in a multi-cell multigroup multiple-input single-output system. Each base station (BS) serves multiple groups of users by forming a single beam with common information per group. We propose centralized and distributed beamforming algorithms for two different optimization targets. The first objective is to minimize the total transmission power of all the BSs while guaranteeing the user-specific minimum quality-of-service targets. The semidefinite relaxation (SDR) method is used to approximate the non-convex multicast problem as a semidefini…
This paper studies energy-efficient coordinated beamforming in multi-cell multi-user multigroup multicast multiple-input single-output systems. We aim at maximizing the network energy efficiency by taking into account the fact that some of the radio frequency chains can be switched off in order to save power. We consider the antenna specific maximum power constraints to avoid non-linear distortion in power amplifiers and user-specific quality of service (QoS) constraints to guarantee a certain QoS levels. We first introduce binary antenna selection variables and use the perspective formulation…
In this paper, we consider a two-hop one-way relay network for multigroup multicast transmission between long-distance users, in which the relay is equipped with multiple antennas, while the transmitters and receivers are all with a single antenna. Assuming that perfect channel state information is available, we study amplify-and-forward (AF) schemes that aim at optimizing the max-min-fair (MMF) rate. We begin by considering the classic beamformed AF (BF-AF) scheme, whose corresponding MMF design problem can be formulated as a rank-constrained fractional semidefinite program (SDP). We show tha…
In the present work, a multibeam satellite that employs aggressive frequency reuse towards increasing the offered throughput is considered. Focusing on the forward link, the goal is to employ multi-antenna signal processing techniques, namely linear precoding, to manage the inter-beam interferences. In this context, fundamental practical limitations, namely the rigid framing structure of satellite communication standards and the on-board per-antenna power constraints, are herein considered. Therefore, the concept of optimal frame based precoding under per-antenna constraints, is discussed. Thi…
Next generation multi-beam SatCom architectures will heavily exploit full frequency reuse schemes along with interference management techniques, e.g., precoding or multiuser detection, to drastically increase the system throughput. In this framework, we address the problem of the user selection for multicast precoding by formulating it as a clustering problem. By introducing a novel mathematical framework, we design fixed-/variable-size clustering algorithms that group users into simultaneously precoded and served clusters while maximising the system throughput. Numerical simulations are used …
In this letter, we propose two power allocation schemes based on the statistical channel state information (CSI) and instantaneous s->r CSI at transmitters respectively for a 2-N-2 cooperative multicast system with non-regenerative network coding.Then the isolated precoder and the distributed precoder are respectively applied to the schemes to further improve the system performance by achieving the full diversity gain. Finally, we demonstrate that joint instantaneous s->r CSI based power allocation and distributed precoder design achieve the best performance.
This work investigates the problem of downlink transmit precoding for physical layer multicasting with a limited number of radio-frequency (RF) chains. To tackle the RF hardware constraint, we consider a hybrid precoder that is partitioned into a high-dimensional RF precoder and a low-dimensional baseband precoder. Considering a total transmit power constraint over the RF chains, the goal is to maximize the minimum (max-min) received signal-to-noise ratio (SNR) among all users. We propose a low complexity algorithm to compute the RF precoder that achieves near-optimal max-min performance. More…
Intelligent reflecting surface (IRS) has recently been envisioned to offer unprecedented massive multiple-input multiple-output (MIMO)-like gains by deploying large-scale and low-cost passive reflection elements. By adjusting the reflection coefficients, the IRS can change the phase shifts on the impinging electromagnetic waves so that it can smartly reconfigure the signal propagation environment and enhance the power of the desired received signal or suppress the interference signal. In this paper, we consider downlink multigroup multicast communication systems assisted by an IRS. We aim for …
Precoding has been conventionally considered as an effective means of mitigating the interference and efficiently exploiting the available in the multiantenna downlink channel, where multiple users are simultaneously served with independent information over the same channel resources. The early works in this area were focused on transmitting an individual information stream to each user by constructing weighted linear combinations of symbol blocks (codewords). However, more recent works have moved beyond this traditional view by: i) transmitting distinct data streams to groups of users and ii)…
This paper studies the concept of jointly utilizing the data information(DI)and channel state information (CSI) in order to design symbol-level precoders for a multiple input and single output (MISO) downlink channel. In this direction, the interference among the simultaneous data streams is transformed to useful signal that can improve the signal to interference noise ratio (SINR) of the downlink transmissions. We propose a maximum ratio transmissions (MRT) based algorithm that jointly exploits DI and CSI to gain the benefits from these useful signals. In this context, a novel framework to mi…
This paper deals with the problem of precoding in multibeam satellite systems. In contrast to general multiuser multiple-input-multiple-output (MIMO) cellular schemes, multibeam satellite architectures suffer from different challenges. First, satellite communications standards embed more than one user in each frame in order to increase the channel coding gain. This leads to the different so-called multigroup multicast model, whose optimization requires computationally complex operations. Second, when the data traffic is generated by several Earth stations (gateways), the precoding matrix must …
With the goal of improving spectral efficiency, complex rotation-based precoding and power allocation schemes are developed for two multiple-input multiple-output (MIMO) communication systems, namely, simultaneous wireless information and power transfer (SWIPT) and physical layer multicasting. While the state-of-the-art solutions for these problems use very different approaches, the proposed approach treats them similarly using a general tool and works efficiently for any number of antennas at each node. Through modeling the precoder using complex rotation matrices, objective functions (transm…
Current State-of-the-Art High Throughput Satellite systems provide wide-area connectivity through multi-beam architectures. Due to the tremendous system throughput requirements that next generation Satellite Communications (SatCom) expect to achieve, traditional 4-colour frequency reuse schemes are not sufficient anymore and more aggressive solutions as full frequency reuse are being considered for multi-beam SatCom. These approaches require advanced interference management techniques to cope with the significantly increased inter-beam interference both at the transmitter, e.g., precoding, and…
We consider multi-group multicast precoding designs for cell-free massive multiple-input multiple-output (MIMO) systems. To optimize the transmit and receive beamforming strategies, we focus on minimizing the sum of the maximum mean squared errors (MSEs) over the multicast groups, which is then approximated with the sum MSE to simplify the computation and signaling. We adopt an iterative bi-directional training scheme with uplink and downlink precoded pilots to cooperatively design the multi-group multicast precoders at each base station and the combiners at each user equipment in a distribute…
Aiming at maximizing the energy efficiency (EE) of multicast multibeam satellite communications, we consider the precoding design under the total power and quality of service (QoS) constraints. Since the original EE maximization problem is nonconvex, it is sequentially converted into a concave-convex fractional programming problem by introducing some variables and using the first-order Taylor low bound approximation. Based on the Charnes-Cooper transformation, it is further converted into a convex problem. Then an iterative algorithm is presented to design the energy efficient precoding. To fi…
Current State-of-the-Art High Throughput Satellite systems provide wide-area connectivity through multi-beam architectures. However, due to the tremendous system throughput requirements that next generation Satellite Communications expect to achieve, traditional 4-colour frequency reuse schemes, i.e., two frequency bands with two orthogonal polarisations, are not sufficient anymore and more aggressive solutions as full frequency reuse are gaining momentum. These approaches require advanced interference management techniques to cope with the significantly increased inter-beam interference, like…
This paper investigates dual-layer non-orthogonally superimposed transmissions for industrial internet of things (IoT) millimeter-wave communications. Essentially, the overlayer is a ubiquitous multicast signal devised to serve all the devices in coverage with a common message, i.e., critical control packet. The underlayer is a composite signal that consists of private unicast messages. Due to safety implications, it is critical that all devices can decode the multicast information. To ensure this requirement, we jointly optimize the hybrid precoder, analog combiners, power allocation, and fai…
This paper investigates rate-splitting (RS) precoding for non-orthogonal unicast and multicast (NOUM) transmissions using fully-digital and hybrid precoders. We study the nonconvex weighted sum-rate (WSR) maximization problem subject to a multicast requirement. We propose FALCON, an approach based on sequential parametric optimization, to solve the aforementioned problem. We show that FALCON converges to a local optimum without requiring judicious selection of an initial feasible point. Besides, we show through simulations that by leveraging RS, hybrid precoders can attain nearly the same perf…
Multicast beamforming is known to improve spectral efficiency. However, its benefits and challenges for hybrid precoders design in millimeter-wave (mmWave) systems remain understudied. To this end, this paper investigates the first joint design of hybrid transmit precoders (with an arbitrary number of finite-resolution phase shifts) and receive combiners for mmWave multi-group multicasting. Our proposed design leverages semidefinite relaxation (SDR), alternating optimization and Cholesky matrix factorization to sequentially optimize the digital/analog precoders at the transmitter and the combi…
Industry 4.0 anticipates massive interconnectivity of industrial devices (e.g., sensors, actuators) to support factory automation and production. Due to the rigidity of wired connections to harmonize with automation, wireless information transfer has attracted substantial attention. However, existing solutions for the manufacturing sector face critical issues in coping with the key performance demands: ultra-low latency, high throughput, and high reliability. Besides, recent advancements in wireless millimeter-wave technology advocates hybrid precoding with affordable hardware and outstanding …
In multi-cast scenario, all desired users are divided into $K$ groups. Each group receives its own individual confidential message stream. Eavesdropper group aims to intercept $K$ confidential-message streams. To achieve a secure transmission, two secure schemes are proposed: maximum group receive power plus null-space (NS) projection (Max-GRP plus NSP) and leakage. The former obtains its precoding vector per group by maximizing its own group receive power subject to the orthogonal constraint, and its AN projection matrix consist of all bases of NS of all desired steering vectors from all grou…
This letter considers a two-receiver multiple-input multiple-output (MIMO) Gaussian broadcast channel model with integrated services. Specifically, we combine two sorts of service messages, and serve them simultaneously: one multicast message intended for both receivers and one confidential message intended for only one receiver. The confidential message is kept perfectly secure from the unauthorized receiver. Due to the coupling of service messages, it is intractable to seek capacity-achieving transmit covariance matrices. Accordingly, we propose a suboptimal precoding scheme based on the gen…
In this paper, we investigate the energy-efficient hybrid precoding design for integrated multicast-unicast millimeter wave (mmWave) system, where the simultaneous wireless information and power transform is considered at receivers. We adopt two sparse radio frequency chain antenna structures at the base station (BS), i.e., fully-connected and subarray structures, and design the codebook-based analog precoding according to the different structures. Then, we formulate a joint digital multicast, unicast precoding and power splitting ratio optimization problem to maximize the energy efficiency of…
Rate-splitting multiple access (RSMA) has been recognized as a promising physical layer strategy for 6G. Motivated by ever increasing popularity of cache-enabled content delivery in wireless communications, this paper proposes an innovative multigroup multicast transmission scheme based on RSMA for cache-aided cloud-radio access networks (C-RAN). Our proposed scheme not only exploits the properties of content-centric communications and local caching at the base stations (BSs), but also incorporates RSMA to better manage interference in multigroup multicast transmission with statistical channel…
This paper proposes symbol level precoding in the downlink of a MISO cognitive system. The new scheme tries to jointly utilize the data and channel information to design a precoding that minimizes the transmit power at a cognitive base station (CBS); without violating the interference temperature constraint imposed by the primary system. In this framework, the data information is handled at symbol level which enables the characterization the intra-user interference among the cognitive users as an additional source of useful energy that should be exploited. A relation between the constructive m…
This paper studies the beamforming design problem to achieve max-min fairness (MMF) in multibeam satellite communications. Contrary to the conventional linear precoding (NoRS) that relies on fully treating any residual interference as noise, we consider a novel multibeam multicast beamforming strategy based on Rate-Splitting Multiple Access (RSMA). RSMA relies on linearly precoded ratesplitting (RS) at the transmitter and Successive Interference Cancellation (SIC) at receivers to enable a flexible framework for non-orthogonal transmission and robust interbeam interference management. Aiming at…
A multi-antenna broadcast channel scenario is considered where a base station delivers contents to cache-enabled user terminals. A joint design of coded caching (CC) and multigroup multicast beamforming is proposed to benefit from spatial multiplexing gain, improved interference management and the global CC gain, simultaneously. The developed general content delivery strategies utilize the multiantenna multicasting opportunities provided by the CC technique while optimally balancing the detrimental impact of both noise and inter-stream interference from coded messages transmitted in parallel. …
Considering a two-user multi-antenna Broadcast Channel, this paper shows that linearly precoded Rate-Splitting (RS) with Successive Interference Cancellation (SIC) receivers is a flexible framework for non-orthogonal transmission that generalizes, and subsumes as special cases, four seemingly different strategies, namely Space Division Multiple Access (SDMA) based on linear precoding, Orthogonal Multiple Access (OMA), Non- Orthogonal Multiple Access (NOMA) based on linearly precoded superposition coding with SIC, and physical-layer multicasting. The paper studies the sum-rate and shows analyti…
In a superimposed unicast and multicast transmission system, one layer of Successive Interference Cancellation (SIC) is required at each receiver to remove the multicast stream before decoding the unicast stream. In this paper, we show that a linearly-precoded Rate-Splitting (RS) strategy at the transmitter can efficiently exploit this existing SIC receiver architecture. By splitting the unicast message into common and private parts and encoding the common parts along with the multicast message into a super-common stream decoded by all users, the SIC is used for the dual purpose of separating …
With the use of common signaling methods for dual-function radar-communications (DFRC) systems, the susceptibility of eavesdropping on messages aimed at legitimate users has worsened. For DFRC systems, the radar target may act as an eavesdropper (ED) that receives a high-energy signal thereby leading to additional challenges. Unlike prior works, we consider a multicast multi-antenna DFRC system with multiple EDs. We then propose a physical layer design approach to maximize the secrecy rate by installing intelligent reflecting surfaces in the radar channels. Our optimization of multiple ED mult…
This paper introduces a unified deep neural network (DNN)-based precoder for two-user multiple-input multiple-output (MIMO) networks with five objectives: data transmission, energy harvesting, simultaneous wireless information and power transfer, physical layer (PHY) security, and multicasting. First, a rotation-based precoding is developed to solve the above problems independently. Rotation-based precoding is new precoding and power allocation that beats existing solutions in PHY security and multicasting and is reliable in different antenna settings. Next, a DNN-based precoder is designed to…
Enabling technologies for energy sustainable Internet of Things (IoT) are of paramount importance since the proliferation of high data communication demands of low power network devices. In this paper, we consider a Multiple Input Single Output (MISO) multicasting IoT system comprising of a multiantenna Transmitter (TX) simultaneously transferring information and power to low power and data hungry IoT Receivers (RXs). Each IoT device is assumed to be equipped with Power Splitting (PS) hardware that enables Energy Harvesting (EH) and imposes an individual Quality of Service (QoS) constraint to …
This paper considers a cloud-RAN architecture with cache-enabled multi-antenna Edge Nodes (ENs) that deliver content to cache-enabled end-users. The ENs are connected to a central server via limited-capacity fronthaul links, and, based on the information received from the central server and the cached contents, they transmit on the shared wireless medium to satisfy users' requests. By leveraging cooperative transmission as enabled by ENs' caches and fronthaul links, as well as multicasting opportunities provided by users' caches, a close-to-optimal caching and delivery scheme is proposed. As a…
This paper investigates a network information flow problem for a multiple-input multiple-output (MIMO) Gaussian wireless network with $K$-users and a single intermediate relay having $M$ antennas. In this network, each user intends to convey a multicast message to all other users while receiving $K-1$ independent messages from the other users via an intermediate relay. This network information flow is termed a MIMO Gaussian $K$-way relay channel. For this channel, we show that $\frac{K}{2}$ degrees of freedom is achievable if $M=K-1$. To demonstrate this, we come up with an encoding and decodi…
