An optimization-based method for improving the productivity of precision machine tools is proposed, where the reference path is computed in local coordinates, and information about the machine tool performance is learned from experimental data. The optimization yields a modified reference that is tracked by the existing low-level controller. The method is tested in simulation for a biaxial positioning system. The positioning system is modelled as double integrator, and the controller characteristic is modelled from experimental data using a least-squares fit. Simulation results show that the method is effective in designing optimal references even for challenging geometries such as sharp corners. The application of this procedure allows the retrofit of the control of existing machines with minimal overhead, by providing a modified reference file to track.
This letter proposes a new design of frequency-locked loop (FLL) which is based on synchronous (dq) reference frame instead of stationary (α\b{eta}) reference frame. First, a synchronous reference frame FLL (briefly called SRF-FLL0) equivalent to the conventional FLL is proposed. Then the SRF-FLL0 is improved by utilizing the phase error to acquire a better performance. The small-signal modeling and parameter tuning of the improved synchronous reference frame FLL (SRF-FLL) are presented. Finally, the theoretical analysis and experiment results verify the superiority and effectiveness of propos…
The Consistency of the Closed-Loop Simplified Refined Instrumental Variable method for Continuous-time system (CLSRIVC) is analysed based on sampled data. It is proven that the CLSRIVC estimator is not consistent when a continuous-time controller is used in the closed-loop.
We show that given a desired closed-loop response for a system, there exists an affine subspace of controllers that achieve this response. By leveraging the existence of this subspace, we are able to separate controller design from closed-loop design by first synthesizing the desired closed-loop response and then synthesizing a controller that achieves the desired response. This is a useful extension to the recently introduced System Level Synthesis framework, in which the controller and closed-loop response are jointly synthesized and we cannot enforce controller-specific constraints without …
In this article, we study the linear time-invariant state-feedback controller design problem for distributed systems. We follow the recently developed system level synthesis (SLS) approach and impose locality structure on the resulting closed-loop mappings; the corresponding controller implementation inherits this prescribed structure. In contrast to existing SLS results, we derive an explicit (rather than implicit) parameterization of all achievable stabilized closed-loops. This admits more efficient IIR representations of the temporal part of the closed-loop dynamics, and it allows for the H…
This paper introduces a closed-loop frequency analysis tool for reset control systems. To begin with sufficient conditions for the existence of the steady-state response for a closed-loop system with a reset element and driven by periodic references are provided. It is then shown that, under specific conditions, such a steady-state response for periodic inputs is periodic with the same period as the input. Furthermore, a framework to obtain the steady-state response and to define a notion of closed-loop frequency response, including high order harmonics, is presented. Finally, pseudo-sensitivi…
Towards Closed-loop Stability of Nonlinear Receding Horizon Games
Automatic Control Lab, ETH Zürich（苏黎世联邦理工学院自动控制实验室）；ETH Zürich（苏黎世联邦理工学院）；Institute of Control Systems, Hamburg University of Technology（汉堡工业大学控制系统研究所）
In this paper, we present a novel idea to improve the transient performance of the existing Simple Adaptive Control architecture, without requiring high adaptation gains. Improvement in performance is achieved by incorporating the closed loop reference model based on the output feedback to the Simple Adaptive Control architecture. In this proposed scheme, the reference model dynamics is driven by the desired command as well as the error signal between the plant output and the reference model output. It is shown that the modified control architecture improves the system performance without any …
One of the primary challenges of system identification is determining how much data is necessary to adequately fit a model. Non-asymptotic characterizations of the performance of system identification methods provide this knowledge. Such characterizations are available for several algorithms performing open-loop identification. Often times, however, data is collected in closed-loop. Application of open-loop identification methods to closed-loop data can result in biased estimates. One method used by subspace identification techniques to eliminate these biases involves first fitting a long-hori…
We present a numerical method to analyze the relative stability of closed-loop single-input-single-output (SISO) dead-time systems on a given left complex half-plane for all positive delays. The well-known boundary crossing method for the imaginary axis is extended to a given vertical line stability boundary in the complex plane for these type of systems. The method allows to compute the characteristic roots crossing the relative stability boundary and their corresponding delays up to a maximum predefined delay. Based on this method, we analyze the relative stability of the closed-loop system …
An increasing trend in the use of neural networks in control systems is being observed. The aim of this paper is to reveal that the straightforward application of learning neural network feedforward controllers with closed-loop data may introduce parameter inconsistency that degrades control performance, and to provide a solution. The proposed method employs instrumental variables to ensure consistent parameter estimates. A nonlinear system example reveals that the developed instrumental variable neural network (IVNN) approach asymptotically recovers the optimal solution, while pre-existing ap…
Reference tracking systems involve a plant that is stabilized by a local feedback controller and a command center that indicates the reference set-point the plant should follow. Typically, these systems are subject to limitations such as disturbances, systems delays, constraints, uncertainties, underperforming controllers, and unmodeled parameters that do not allow them to achieve the desired performance. In situations where it is not possible to redesign the inner-loop system, it is usual to incorporate an outer-loop control that instructs the system to follow a modified reference path such t…
Network-Realised Model Predictive Control Part I: NRF-Enabled Closed-loop Decomposition
Department of Automatic Control；Systems Engineering, ``Politehnica'' University of Bucharest, Bucharest, Romania -2.5mm；Laboratoire des Signaux et Syst\`emes, CentraleSup\'elec, Paris-Saclay University, Gif-sur-Yvette, France -10mm
This paper proposes an adaptive control allocation approach for uncertain over-actuated systems with actuator saturation. The proposed method does not require uncertainty estimation or a persistent excitation assumption. Using the element-wise non-symmetric projection algorithm, the adaptive parameters are restricted to satisfy certain optimality conditions leading to overall closed loop system stability. Furthermore, a sliding mode controller with a time-varying sliding surface, working in tandem with the adaptive control allocation, is proposed to guarantee the outer loop stability and refer…
High-performance real-time wireless connectivity is at the heart of the Industrial Internet-of-Things (IIoT). Realizing wireless closed-loop control is crucial for various mission-critical IIoT systems. Existing wireless technologies fall short of meeting the stringent performance requirements of closed-loop control. This paper presents a novel wireless solution, called \textsf{GALLOP}, for realizing closed-loop control over multi-hop or single-hop networks. \textsf{GALLOP} adopts a pragmatic design approach for addressing the challenges of wireless closed-loop control. Key design aspects of \…
The controller state and reference governor (CSRG) is an add-on scheme for nominal closed-loop systems with dynamic controllers which supervises the controller internal state and the reference input to the closed-loop system to enforce pointwise-in-time constraints. By admitting both controller state and reference modifications, the CSRG can achieve an enlarged constrained domain of attraction compared to conventional reference governor schemes where only reference modification is permitted. This paper studies the CSRG for systems subject to stochastic disturbances and chance constraints. We d…
This paper is concerned with a bilinear control problem for enhancing convection-cooling via an incompressible velocity field. Both optimal open-loop control and closed-loop feedback control designs are addressed. First and second order optimality conditions for characterizing the optimal solution are discussed. In particular, the method of instantaneous control is applied to establish the feedback laws. Moreover, the construction of feedback laws is also investigated by directly utilizing the optimality system with appropriate numerical discretization schemes. Computationally, it is much easi…
It is typically proven in adaptive control that asymptotic stabilization and tracking holds, and that at best a bounded-noise bounded-state property is proven. Recently, it has been shown in both the pole-placement control and the $d$-step ahead control settings that if, as part of the adaptive controller, a parameter estimator based on the original projection algorithm is used and the parameter estimates are restricted to a convex set, then the closed-loop system experiences linear-like behavior: exponential stability, a bounded gain on the noise in every $p$-norm, and a convolution bound on …
We propose a virtual clinical trial for assessing the safety and efficacy of closed-loop diabetes treatments prior to an actual clinical trial. Such virtual trials enable rapid and risk-free pretrial testing of algorithms, and they can be used to compare different treatment variations for large and diverse populations. The participants are represented by multiple mathematical models, consisting of stochastic differential equations, and we use Monte Carlo closed-loop simulations to compute detailed statistics of the closed-loop treatments. We implement the virtual clinical trial using high-perf…
This paper proposes an adaptive neuro-fuzzy framework to improve drug infusion rate in closed-loop control of anesthesia. The proposed controller provides a sub-optimal propofol administration rate as input to reach the desired bispectral index, which is the output of the system, in both induction and maintenance phases. In this controller, a critic agent assesses the plant output and produces a reinforcement signal to adapt the controller parameters and minimize the propofol administration rate. The controller is applied to a conventional pharmacokinetic-pharmacodynamics model of anesthesia t…
In this paper, the stabilization problem with closed-loop domain of attraction (DOA) enlargement for discrete-time general nonlinear plants is solved. First, a sufficient condition for asymptotic stabilization and estimation of the closed-loop DOA is given. It shows that, for a given Lyapunov function, the negative-definite and invariant set in the state-control space is a stabilizing controller set and its projection along the control space to the state space can be an estimate of the closed-loop DOA. Then, an algorithm is proposed to approximate the negative-definite and invariant set for th…
In this article, the definition on the control ability, and the relation between the open-loop control ability and the closed-loop performance are studied systematically for the linear dynamical systems. Firstly, to define and compare rationally the state control ability between the different controlled plants or one controlled plant with the different system parameters, the normalization of the input variables, the state variables, the system mdeols are discussed. With the help of the normalization, the state control ability with the time attribute can be difined under the unit input constrai…
Closed-loop vs. Open-loop Kalman Filter Architectures in Airborne Aided Inertial Navigation
Airbus Central Research and Technology（空客中央研究与技术中心）；Department of Engineering Cybernetics, Norwegian University of Science and Technology（挪威科技大学工程 cybernetics 系）
In this paper, we propose a virtual clinical trial for assessing the performance and identifying risks in closed-loop diabetes treatments. Virtual clinical trials enable fast and risk-free tests of many treatment variations for large populations of fictive patients (represented by mathematical models). We use closed-loop Monte Carlo simulation, implemented in high-performance software and hardware, to quantify the uncertainty in treatment performance as well as to compare the performance in different scenarios or of different closed-loop treatments. Our software can be used for testing a wide …
Federal University of Technology, Akure（阿库雷联邦理工大学）
The proportional-integral-derivative (PID) control law is often overlooked as a computational imitation of the critic control in human decision. This paper provides a formulation to remedy this problem. Further, based on the characteristic settling-behaviour of dynamical systems, the "closed PID-loop model" following control (CPLMFC) method is introduced for automatic PID design. Also, a method for closed-loop settling-time identification is provided. The CPLMFC algorithm and some recommended guidelines are given for setting the critic weights of the PID. Finally, two representative case-studi…
In this work, we propose a framework to learn feedback control policies with guarantees on closed-loop generalization and adversarial robustness. These policies are learned directly from expert demonstrations, contained in a dataset of state-control input pairs, without any prior knowledge of the task and system model. We use a Lipschitz-constrained loss minimization scheme to learn feedback policies with certified closed-loop robustness, wherein the Lipschitz constraint serves as a mechanism to tune the generalization performance and robustness to adversarial disturbances. Our analysis exploi…
There has been an increasing interest in using neural networks in closed-loop control systems to improve performance and reduce computational costs for on-line implementation. However, providing safety and stability guarantees for these systems is challenging due to the nonlinear and compositional structure of neural networks. In this paper, we propose a novel forward reachability analysis method for the safety verification of linear time-varying systems with neural networks in feedback interconnection. Our technical approach relies on abstracting the nonlinear activation functions by quadrati…
Mitsubishi Electric Research Laboratories（三菱电机研究院）；École polytechnique fédérale de Lausanne（洛桑联邦理工学院）；Swiss Federal Laboratories for Materials Science and Technology（瑞士联邦材料科学与技术实验室）
We study the problem of performance optimization of closed-loop control systems with unmodeled dynamics. Bayesian optimization (BO) has been demonstrated effective for improving closed-loop performance by automatically tuning controller gains or reference setpoints in a model-free manner. However, BO methods have rarely been tested on dynamical systems with unmodeled constraints. In this paper, we propose a violation-aware BO algorithm (VABO) that optimizes closed-loop performance while simultaneously learning constraint-feasible solutions. Unlike classical constrained BO methods which allow a…
