This paper introduces a closed-loop frequency analysis tool for reset control systems. To begin with sufficient conditions for the existence of the steady-state response for a closed-loop system with a reset element and driven by periodic references are provided. It is then shown that, under specific conditions, such a steady-state response for periodic inputs is periodic with the same period as the input. Furthermore, a framework to obtain the steady-state response and to define a notion of closed-loop frequency response, including high order harmonics, is presented. Finally, pseudo-sensitivities for reset control systems are defined. These simplify the analysis of this class of systems and allow a direct software implementation of the analysis tool. To show the effectiveness of the proposed analysis method the position control problem for a precision positioning stage is studied. In particular, comparison with the results achieved using methods based on the Describing Function shows that the proposed method achieves superior closed-loop performance.
In this paper, we introduce a new representation for open-loop reset systems. We show that at steady-state a reset integrator can be modelled as a parallel interconnection of the base-linear system and piece-wise constant nonlinearity. For sinusoidal input signals, this nonlinearity takes a form of a square wave. Subsequently, we show how the behaviour of a general open-loop reset system is related to the nonlinearity of a reset integrator. The proposed approach simplifies the analysis of reset elements in the frequency domain and provides new insights into the behaviour of reset control syste…
The ever-growing demands on speed and precision from the precision motion industry have pushed control requirements to reach the limitations of linear control theory. Nonlinear controllers like reset provide a viable alternative since they can be easily integrated into the existing linear controller structure and designed using industry-preferred loop-shaping techniques. However, currently, loop-shaping is achieved using the describing function (DF) and performance analysed using linear control sensitivity functions not applicable for reset control systems, resulting in a significant deviation…
Exponential stability of a PI plus reset integrator controller by a sampled-data system approach
Gipsa-lab（吉普萨实验室）；CNRS, LAAS（法国国家科学研究中心，图卢兹航空航天实验室）；Univ de Toulouse, UPS, LAAS（图卢兹大学，国立高等邮电学校，图卢兹航空航天实验室）；Dpto. Informática y Sistemas, University of Murcia（穆尔西亚大学，计算机与系统系）；Univ de Toulouse, LAAS（图卢兹大学，图卢兹航空航天实验室）
Beyond the Waterbed Effect: Development of Fractional Order CRONE Control with Non-Linear Reset
Delft Center for Systems and Control, Delft University of Technology（代尔夫特系统与控制中心，代尔夫特理工大学）；Department of Precision and Microsystems Engineering, Delft University of Technology（精密与微系统工程学院，代尔夫特理工大学）
The ever-increasing industry desire for improved performance makes linear controller design run into fundamental limitations. Nonlinear control methods such as Reset Control (RC) are needed to overcome these. RC is a promising candidate since, unlike other nonlinear methods, it easily integrates into the industry-preferred PID design framework. Thus far, RC has been analysed in the frequency domain either through describing function analysis or by direct closed-loop numerical computation. The former computes a simplified closed-loop RC response by assuming a sufficient low-pass behaviour. In d…
The high tech industry which requires fast stable motion with nanometer precision continues to mainly use PID which is limited by fundamental linear control limitations. Floor vibrations as disturbance significantly affect performance and their rejection is particularly affected by these limitations. Reset control has provided a promising alternative to surpass these, while simultaneously allowing the use of industry standard loop-shaping during design. However, the reset action introduced higher order harmonics can induce unwanted dynamics and negatively influence performance. This paper inve…
This paper presents a complex order filter developed and subsequently integrated into a PID-based controller design. The nonlinear filter is designed with reset elements to have describing function based frequency response similar to that of a linear (practically non-implementable) complex order filter. This allows for a design which has a negative gain slope and a corresponding positive phase slope as desired from a loop-shaping controller-design perspective. This approach enables improvement in precision tracking without compromising the bandwidth or stability requirements. The proposed desi…
According to the well-known loop shaping method for the design of controllers, the performance of the controllers in terms of step response, steady-state disturbance rejection and noise attenuation and robustness can be improved by increasing the gain at lower frequencies and decreasing it at higher frequencies and increasing the phase margin as much as possible. However, the inherent properties of linear controllers, the Bode's phase-gain relation, create a limitation. In theory, a complex-order transfer function can break the Bode's gain-phase relation; however, such transfer function cannot…
According to the well-known loop-shaping control design approach, the steady-state precision of control systems can be improved by stacking integrators. However, due to the waterbed effect in linear control systems, such an action will worsen the transient response by increasing overshoot and creating wind-up problems. This paper presents a new architecture for rest control systems that can significantly decrease the overshoot and create a no-overshoot performance even in presence of stacked integrators. The steady-state analysis of the proposed system will also show that improved precision ex…
Distributed Economic Dispatch Scheme of A BESS Network with A Switching Utility Grid in Energy Internet Paradigm via Reset Consensus Method
College of Electrical Engineering, Zhejiang University（浙江大学电气工程学院）；College of Artificial Intelligence, Nankai University（南开大学人工智能学院）；Hainan Institute, Zhejiang University（浙江大学海南研究院）
Koopman-Based Robust Model Predictive Control for Nonlinear Systems with Stochastic Intermittent Measurements
Harbin Institute of Technology（哈尔滨工业大学）；School of Astronautics, Harbin Institute of Technology（哈尔滨工业大学航天学院）；Nanyang Technological University（南洋理工大学）；Nanyang Environment and Water Research Institute (NEWRI)（南洋环境与水研究）
The Consistency of the Closed-Loop Simplified Refined Instrumental Variable method for Continuous-time system (CLSRIVC) is analysed based on sampled data. It is proven that the CLSRIVC estimator is not consistent when a continuous-time controller is used in the closed-loop.
We show that given a desired closed-loop response for a system, there exists an affine subspace of controllers that achieve this response. By leveraging the existence of this subspace, we are able to separate controller design from closed-loop design by first synthesizing the desired closed-loop response and then synthesizing a controller that achieves the desired response. This is a useful extension to the recently introduced System Level Synthesis framework, in which the controller and closed-loop response are jointly synthesized and we cannot enforce controller-specific constraints without …
In this article, we study the linear time-invariant state-feedback controller design problem for distributed systems. We follow the recently developed system level synthesis (SLS) approach and impose locality structure on the resulting closed-loop mappings; the corresponding controller implementation inherits this prescribed structure. In contrast to existing SLS results, we derive an explicit (rather than implicit) parameterization of all achievable stabilized closed-loops. This admits more efficient IIR representations of the temporal part of the closed-loop dynamics, and it allows for the H…
High-performance real-time wireless connectivity is at the heart of the Industrial Internet-of-Things (IIoT). Realizing wireless closed-loop control is crucial for various mission-critical IIoT systems. Existing wireless technologies fall short of meeting the stringent performance requirements of closed-loop control. This paper presents a novel wireless solution, called \textsf{GALLOP}, for realizing closed-loop control over multi-hop or single-hop networks. \textsf{GALLOP} adopts a pragmatic design approach for addressing the challenges of wireless closed-loop control. Key design aspects of \…
This paper is concerned with a bilinear control problem for enhancing convection-cooling via an incompressible velocity field. Both optimal open-loop control and closed-loop feedback control designs are addressed. First and second order optimality conditions for characterizing the optimal solution are discussed. In particular, the method of instantaneous control is applied to establish the feedback laws. Moreover, the construction of feedback laws is also investigated by directly utilizing the optimality system with appropriate numerical discretization schemes. Computationally, it is much easi…
We propose a virtual clinical trial for assessing the safety and efficacy of closed-loop diabetes treatments prior to an actual clinical trial. Such virtual trials enable rapid and risk-free pretrial testing of algorithms, and they can be used to compare different treatment variations for large and diverse populations. The participants are represented by multiple mathematical models, consisting of stochastic differential equations, and we use Monte Carlo closed-loop simulations to compute detailed statistics of the closed-loop treatments. We implement the virtual clinical trial using high-perf…
Federal University of Technology, Akure（阿库雷联邦理工大学）
The proportional-integral-derivative (PID) control law is often overlooked as a computational imitation of the critic control in human decision. This paper provides a formulation to remedy this problem. Further, based on the characteristic settling-behaviour of dynamical systems, the "closed PID-loop model" following control (CPLMFC) method is introduced for automatic PID design. Also, a method for closed-loop settling-time identification is provided. The CPLMFC algorithm and some recommended guidelines are given for setting the critic weights of the PID. Finally, two representative case-studi…
In this work, we propose a framework to learn feedback control policies with guarantees on closed-loop generalization and adversarial robustness. These policies are learned directly from expert demonstrations, contained in a dataset of state-control input pairs, without any prior knowledge of the task and system model. We use a Lipschitz-constrained loss minimization scheme to learn feedback policies with certified closed-loop robustness, wherein the Lipschitz constraint serves as a mechanism to tune the generalization performance and robustness to adversarial disturbances. Our analysis exploi…
