This paper contributes to the design of a fractional order (FO) internal model controller (IMC) for a first order plus time delay (FOPTD) process model to satisfy a given set of desired robustness specifications in terms of gain margin (Am) and phase margin (Pm). The highlight of the design is the choice of a fractional order (FO) filter in the IMC structure which has two parameters (lambda and beta) to tune as compared to only one tuning parameter (lambda) for traditionally used integer order (IO) filter. These parameters are evaluated for the controller, so that Am and Pm can be chosen independently. A new methodology is proposed to find a complete solution for controller parameters, the methodology also gives the system gain cross-over frequency (wg) and phase cross-over frequency (wp). Moreover, the solution is found without any approximation of the delay term appearing in the controller.
The skew Toeplitz approach is one of the well developed methods to design H-infinity controllers for infinite dimensional systems. In order to be able to use this method the plant needs to be factorized in some special manner. This paper investigates the largest class of SISO time delay systems for which the special factorizations required by the skew Toeplitz approach can be done. Reliable implementation of the optimal controller is also discussed. It is shown that the finite impulse response (FIR) block structure appears in these controllers not only for plants with I/O delays, but also for …
The plants of nano air vehicles (NAVs) are generally unstable, adversely coupled, and uncertain. Besides, the autopilot hardware of a NAV has limited sensing and computational capabilities. Hence, these vehicles need a single controller referred to as Robust Simultaneously Stabilizing Decoupling (RSSD) output feedback controller that achieves simultaneous stabilization, desired decoupling, robustness, and performance for a finite set of unstable multi-input-multi-output adversely coupled uncertain plants. To synthesize a RSSD output feedback controller, a new method that is based on a central …
This article explores the optimization of plant characteristics and controller parameters for electrified mobility. Electrification of mobile transportation systems, such as automobiles and aircraft, presents the ability to improve key performance metrics such as efficiency and cost. However, the strong bidirectional coupling between electrical and thermal dynamics within new components creates integration challenges, increasing component degradation and reducing performance. Diminishing these issues requires novel plant designs and control strategies. The electrified mobility literature provi…
Frequency control (FC) enables utility-scale grid-connected hybrid power plants (HPPs) to operate in compliance with grid code requirements while to capture value streams from provision of frequency control services (FCSs). In this paper, a novel hierarchical FC approach is proposed to allow HPPs to provide three types of FCSs, namely fast frequency response (FFR), frequency containment response (FCR) and frequency restoration response (FRR). To accommodate state-of-the-art fast FC, controllers for fast FCSs, such as FFR and FCR, are implemented at asset controllers, while controllers for slow…
This paper investigates the design of self-triggered controllers for networked control systems (NCSs), where the dynamics of the plant is \textit{unknown} apriori. To deal with the unknown transition dynamics, we employ the Gaussian process (GP) regression in order to learn the dynamics of the plant. To design the self-triggered controller, we formulate an optimal control problem, such that the optimal control and communication policies can be jointly designed based on the GP model of the plant. Moreover, we provide an overall implementation algorithm that jointly learns the dynamics of the pl…
Economically Efficient Combined Plant and Controller Design Using Batch Bayesian Optimization: Mathematical Framework and Airborne Wind Energy Case Study
An optimal control law for networked control systems with a discrete-time linear time-invariant (LTI) system as plant and networks between sensor and controller as well as between controller and actuator is proposed. This controller is designed by solving an optimization problem that is a generalization of the optimization problem used to obtain the Linear Quadratic Regulator (LQR) for deterministic discrete-time LTI systems. The networks are represented by random delays and drop outs of transmitted data packets.
The approach in Foias et al. (1996) is one of the well-developed methods to design H-infinity controllers for general infinite dimensional systems. This approach is applicable if the plant admits a special coprime inner/outer factorization. We give the largest class of single-input-single-output (SISO) time delay systems for which this factorization is possible and factorize the admissible plants. Based on this factorization, we compute the optimal H-infinity performance and eliminate unstable pole-zero cancellations in the optimal H-infinity controller. We extend the results on the finite imp…
A state space based design method is given to find strongly stabilizing controllers for multiple-input-multiple-output plants (MIMO). A sufficient condition is derived for the existence of suboptimal stable H-infinity controller in terms of linear matrix inequalities (LMIs) and the controller order is twice that of the plant. A new parameterization of strongly stabilizing controllers is determined using linear fractional transformations (LFTs).
Two ways of designing low-order discrete-time (i.e. digital) controls for low-order plant (i.e. process) models are considered in this tutorial. The first polynomial method finds the controller coefficients that place the poles of the closed-loop feedback system at specified positions for adroit controls, i.e. for a rapid and compressed transient response, when the plant model is known precisely. The poles and zeros of the resulting controller are unconstrainted, although an integrator may be included in the controller structure as a special case to drive steady-state errors towards zero. The …
District cooling energy plants (DCEPs) consisting of chillers, cooling towers, and thermal energy storage (TES) systems consume a considerable amount of electricity. Optimizing the scheduling of the TES and chillers to take advantage of time-varying electricity price is a challenging optimal control problem. The classical method, model predictive control (MPC), requires solving a high dimensional mixed-integer nonlinear program (MINLP) because of the on/off actuation of the chillers and charging/discharging of TES, which are computationally challenging. RL is an attractive alternative to MPC: …
Robust imitation learning seeks to mimic expert controller behavior while ensuring stability, but current methods require accurate plant models. Here, robust imitation learning is addressed for stabilizing poorly modeled plants with linear dynamic output feedback. Open-loop input-output properties are used to characterize an uncertain plant, and the feedback matrix of the dynamic controller is learned while enforcing stability through the controller's open-loop QSR-dissipativity properties. The imitation learning method is applied to two systems with parametric uncertainty.
Soft-reset controllers are introduced as a way to approximate hard-reset controllers. The focus is on implementing reset controllers that are (strictly) passive and on analyzing their interconnection with passive plants. A passive hard-reset controller that has a strongly convex energy function can be approximated as a soft-reset controller. A hard-reset controller is a hybrid system whereas a soft-reset controller corresponds to a differential inclusion, living entirely in the continuous-time domain. This feature may make soft-reset controllers easier to understand and implement. A soft-reset…
The problem of designing a stabilizing feedback controller in the presence of saturating actuators and multi-rate (asynchronous) aperiodic state measurements is studied. Specifically, we consider a scenario in which measurements of the plant states are collected at the controller end in a sporadic and asynchronous fashion. A hybrid controller is used to perform a fusion of measurements sampled at different times. In between sampling events, the controller behaves as a copy of the plant and provides a feedback control signal based on the reconstruction of the plant state. The presence of satura…
This paper studies stochastic aperiodic stabilization of a networked control system (NCS) consisting of a continuous-time plant and a discrete-time controller. The plant and the controller are assumed to be connected by communication channels with i.i.d. time-varying delays. The delays are theoretically not required to be bounded even when the plant is unstable in the deterministic sense. In our NCS, the sampling interval is supposed to be determined directly by such communication delays. A necessary and sufficient inequality condition is presented for designing a state-feedback controller sta…
Novosibirsk State Technical University（新西伯利亚国立技术大学）
The article considers the problem of the optimal control of a wind power plant based on fuzzy control and automation of generating the fuzzy rule base. Fuzzy rules by experts do not always provide a maximum power output of the wind plant and fuzzy rule bases require an adjustment in the case of changing the parameters of the wind power plant or the environment. This research proposes the method for optimizing the fuzzy rules base compiled by various experts. The method is based on balancing weights of fuzzy rules into the base by the Particle Swarm Optimization algorithm. The experiment has sh…
Resonant controllers are widely used in applications involving reference tracking and disturbance rejection of periodic signals. The controller design is typically performed by a trial-and-error approach or by means of time and resource-consuming analytic methods that require an accurate plant model, intricated mathematics and sophisticated tools. In this paper, we propose an easily implementable, model-free method for tuning a proportional-multi-resonant controller applicable to general linear time-invariant causal plants. Just like the Ziegler-Nichols methods, the proposed methodology consis…
Synthesizing controllers directly from frequency-domain measurement data is a powerful tool in the linear time-invariant framework. Ever-increasing performance requirements necessitate extending these approaches to account for plant variations. The aim of this paper is to develop frequency-domain analysis and synthesis conditions for local internal stability and $\mathcal{H}_\infty$-performance of single-input single-output linear parameter-varying systems. The developed synthesis procedure only requires frequency-domain measurement data of the system and does not need a parametric model of th…
This document describes the design of a PID controller for a rotation pitch plant of a degree freedom. In the controller design, the tuning methods of Aströn Hägglund (AH), Kaiser Chaira (KC) and Kaiser Rajka (KR) will be used, verifying the performance in simulations and in the plant. Finally, the development for the implementation of an analog PID controller through circuits with operational amplifiers is described.
We present a novel approach to control design for nonlinear systems which leverages model-free policy optimization techniques to learn a linearizing controller for a physical plant with unknown dynamics. Feedback linearization is a technique from nonlinear control which renders the input-output dynamics of a nonlinear plant \emph{linear} under application of an appropriate feedback controller. Once a linearizing controller has been constructed, desired output trajectories for the nonlinear plant can be tracked using a variety of linear control techniques. However, the calculation of a lineariz…
An integral extension of state-feedback controllers for linear time-varying plants is proposed, which preserves performance of the nominal controller in the unperturbed case. Similar to time-invariant state feedback with integral action, the controller achieves complete rejection of disturbances whose effective action on the plant is constant with respect to the control input. Moreover, bounded-input bounded-state stability with respect to arbitrary disturbances is shown. A modification for preventing controller windup as well as tuning guidelines are discussed. The efficacy of the proposed te…
