An optimal control law for networked control systems with a discrete-time linear time-invariant (LTI) system as plant and networks between sensor and controller as well as between controller and actuator is proposed. This controller is designed by solving an optimization problem that is a generalization of the optimization problem used to obtain the Linear Quadratic Regulator (LQR) for deterministic discrete-time LTI systems. The networks are represented by random delays and drop outs of transmitted data packets.
Conventional supervisory control theory assumes full synchronization between the supervisor and the plant. This assumption is violated in a networked-based communication setting due to the presence of delays, and this may result in incorrect behavior of a supervisor obtained from conventional supervisory control theory. This paper presents a technique to synthesize a networked supervisor handling communication delays. For this purpose, first, a networked supervisory control framework is provided, where the supervisor interacts with the plant through control and observation channels, both of wh…
This paper deals with the design of scheduling policies for networked control systems whose shared networks have limited communication capacity and the controller to plant channels are vulnerable to jamming attacks. We assume that among N plants, only M (< N) plants can communicate with their controllers at any time instant, and the attack sequences follow an (m,k)-firm model, i.e., in any k consecutive time instants, the control inputs sent to some or all of the plants accessing the communication network, are deactivated at most at m (< k) time instants. We devise a new algorithm to allocate …
This paper deals with the design of scheduling logics for Networked Control Systems (NCSs) whose shared communication networks have limited capacity. We assume that among \(N\) plants, only \(M\:(< N)\) plants can communicate with their controllers at any time instant. We present an algorithm to allocate the network to the plants periodically such that stability of each plant is preserved. The main apparatus for our analysis is a switched systems representation of the individual plants in an NCS. We rely on multiple Lyapunov-like functions and graph-theoretic arguments to design our scheduling…
This paper studies stochastic aperiodic stabilization of a networked control system (NCS) consisting of a continuous-time plant and a discrete-time controller. The plant and the controller are assumed to be connected by communication channels with i.i.d. time-varying delays. The delays are theoretically not required to be bounded even when the plant is unstable in the deterministic sense. In our NCS, the sampling interval is supposed to be determined directly by such communication delays. A necessary and sufficient inequality condition is presented for designing a state-feedback controller sta…
We introduce a versatile framework to model and study networked control systems (NCSs). An NCS is described as a feedback interconnection of a plant and a controller communicating through a bidirectional channel modelled by cascaded nonlinear two-port networks. This model is sufficiently rich to capture various properties of a real-world communication channel, such as distortion, interference, and nonlinearity. Uncertainties in the plant, controller and communication channels can be handled simultaneously in the framework. We provide a necessary and sufficient condition for the robust finite-g…
This work mainly investigates the mean-square stability and stabilizability for a single-input single-output networked linear feedback system. The control signal in the networked system is transmitted over an unreliable channel. In this unreliable channel, the data transmission times, referred to as channel induced delays, are random values and the transmitted data could also be dropout with certain probability. The channel induced delays and packet dropout are modeled by an independent and identically distributed stochastic process with a fixed probability mass function. At the channel termin…
This paper provides a control protocol for the robust output feedback consensus of networked heterogeneous nonlinear negative-imaginary (NI) systems. Heterogeneous nonlinear output strictly negative-imaginary (OSNI) controllers are applied in positive feedback according to the network topology to achieve output feedback consensus. The main contribution of this paper is extending the previous studies of the robust output feedback consensus problem for networked heterogeneous linear NI systems to nonlinear NI systems. Output feedback consensus is proved by investigating the internal stability of…
A robust output feedback consensus problem for networked identical nonlinear negative-imaginary (NI) systems is investigated in this paper. Output consensus is achieved by applying identical linear output strictly negative-imaginary (OSNI) controllers to all the nonlinear NI plants in positive feedback through the network topology. First, we extend the definition of nonlinear NI systems from single-input single-output (SISO) systems to multiple-input multiple-output (MIMO) systems and also extend the definition of OSNI systems to nonlinear scenarios. Asymptotic stability is proved for the clos…
This paper deals with Networked Control Systems (NCSs) whose shared networks have limited communication capacity and are prone to data losses. We assume that among (N) plants, only (M < N) plants can communicate with their controllers at any time instant. In addition, a control input, at any time instant, is lost in a channel with a probability (p). Our contributions are threefold. First, we identify necessary and sufficient conditions on the open-loop and closed-loop dynamics of the plants that ensure existence of purely time-dependent periodic scheduling sequences under which stability of ea…
Estimating the occurrence of packet losses in a networked control systems (NCS) can be used to improve the control performance and to detect failures or cyber-attacks. This study considers simultaneous estimation of the plant state and the packet loss occurrences at each time step. After formulation of the problem, two solutions are proposed. In the first one, an input-output representation of the NCS model is used to design a recursive filter for estimation of the packet loss occurrences. This estimation is then used for state estimation through Kalman filtering. In the second solution, a sta…
A Passivity-Based Design for Stability and Robustness in Event-Triggered Networked Control Systems with Communication Delays, Signal Quantizations and Packet Dropouts
Most approaches for self-triggered control (STC) of nonlinear networked control systems (NCS) require measurements of the full system state to determine transmission times. However, for most control systems only a lower dimensional output is available. To bridge this gap, we present in this paper an output-feedback STC approach for nonlinear NCS. An asymptotically stable observer is used to reconstruct the plant state and transmission times are determined based on the observer state. The approach employs hybrid Lyapunov functions and a dynamic variable to encode past state information and to m…
In this paper, we propose a design of a model-free networked controller for a nonlinear plant whose mathematical model is unknown. In a networked control system, the controller and plant are located away from each other and exchange data over a network, which causes network delays that may fluctuate randomly due to network routing. So, in this paper, we assume that the current network delay is not known but the maximum value of fluctuating network delays is known beforehand. Moreover, we also assume that the sensor cannot observe all state variables of the plant. Under these assumption, we app…
In this work, we study the problem of supervisory control of networked discrete event systems. We consider lossy communication channels with bounded network delays, for both the control channel and the observation channel. By a model transformation, we transform the networked supervisor synthesis problem into the classical (non-networked) supervisor synthesis problem (for non-deterministic plants), such that the existing supervisor synthesis tools can be used for synthesizing networked supervisors. In particular, we can use the (state-based) normality property for the synthesis of the supremal…
In this paper, we propose a novel framework for modeling and analysis of networked discrete-event systems (DES). We assume that the plant is controlled by a feedback supervisor whose control decisions are subject to communication delays and losses. Furthermore, we consider a general setting where the supervisor sends control decisions to different actuators via different communication channels whose dynamics are independent. We provide a system theoretic approach by identifying the state-space of overall networked system and investigating the dynamic of the entire state-space. Our approach pre…
This paper studies the tracking control problem of networked and quantized control systems under both multiple networks and event-triggered mechanisms. Multiple networks are to connect the plant and reference system with decentralized controllers to guarantee their information transmission, whereas event-triggered mechanisms are to reduce the information transmission via multiple networks. In this paper, all networks are independent and asynchronous and have local event-triggered mechanisms, which are based on local measurements and determine whether the local measurements need to be transmitt…
Filtered Smith predictors are well established for controlling linear plants with constant time delays. Apart from this classical application scenario, they are also employed within networked control loops, where the measurements are sent in separate packets over a transmission channel that is subject to time-varying delays. However, no stability guarantees can be given in this case. The present paper illustrates that the time-varying delays as well as the packetized character of the transmissions have to be taken into account for stability analysis. Hence, three network protocols, which use d…
This paper investigates the design of self-triggered controllers for networked control systems (NCSs), where the dynamics of the plant is \textit{unknown} apriori. To deal with the unknown transition dynamics, we employ the Gaussian process (GP) regression in order to learn the dynamics of the plant. To design the self-triggered controller, we formulate an optimal control problem, such that the optimal control and communication policies can be jointly designed based on the GP model of the plant. Moreover, we provide an overall implementation algorithm that jointly learns the dynamics of the pl…
This paper studies the possibility of detecting and isolating topology failures (including link failures and node failures) of a networked system from subsystem measurements, in which subsystems are of fixed high-order linear dynamics, and the exact interaction weights among them are unknown. We prove that in such class of networked systems with the same network topologies, the detectability and isolability of a given topology failure (set) are generic properties, indicating that it is the network topology that dominates the property of being detectable or isolable for a failure (set). We firs…
In this paper, we study the privacy preservation problem in a cooperative networked control system, which has closed-loop dynamics, working for the task of linear quadratic Guassian (LQG) control. The system consists of a user and a server: the user owns the plant to control, while the server provides computation capability, and the user employs the server to compute control inputs for it. To enable the server's computation, the user needs to provide the measurements of the plant states to the server, who then calculates estimates of the states, based on which the control inputs are computed. …
Sparse Representations for Packetized Predictive Networked Control
Graduate School of Informatics, Kyoto University（京都大学情报学研究科）；School of Electrical Engineering & Computer Science, The University of Newcastle（纽卡斯尔大学电气与计算机工程学院）
This paper studies the tracking control problem of nonlinear networked and quantized control systems (NQCSs) with communication delays. The desired trajectory is generated by a reference system. The communication network is to guarantee the information transmission among the plant, the reference system and the controller. The communication network also brings about some undesired issues like time-varying transmission intervals, time-varying transmission delays, packet dropouts, scheduling and quantization effects, which lead to non-vanishing network-induced errors and affect the tracking perfo…
Verifying Response Times in Networked Automation Systems Using Jitter Bounds
University of Sannio（萨尼奥大学）；Tallinn University of Technology（塔尔图理工大学）；ABB Global Industries and Services Ltd.（ABB全球工业与服务有限公司）；University of Naples Federico II（那不勒斯费德里科二世大学）
