The rapid development of the fifth generation mobile communication systems accelerates the implementation of vehicle-to-everything communications. Compared with the other types of vehicular communications, vehicle-to-vehicle (V2V) communications mainly focus on the exchange of driving safety information with neighboring vehicles, which requires ultra-reliable and low-latency communications (URLLCs). However, the frame size is significantly shortened in V2V URLLCs because of the rigorous latency requirements, and thus the overhead is no longer negligible compared with the payload information from the perspective of size. In this paper, we investigate the frame design and resource allocation for an urban V2V URLLC system in which the uplink cellular resources are reused at the underlay mode. Specifically, we first analyze the lower bounds of performance for V2V pairs and cellular users based on the regular pilot scheme and superimposed pilot scheme. Then, we propose a frame design algorithm and a semi-persistent scheduling algorithm to achieve the optimal frame design and resource allocation with the reasonable complexity. Finally, our simulation results show that the proposed frame design and resource allocation scheme can greatly satisfy the URLLC requirements of V2V pairs and guarantee the communication quality of cellular users.
Vehicular networks, an enabling technology for Intelligent Transportation System (ITS), smart cities, and autonomous driving, can deliver numerous on-board data services, e.g., road-safety, easy navigation, traffic efficiency, comfort driving, infotainment, etc. Providing satisfactory Quality of Service (QoS) in vehicular networks, however, is a challenging task due to a number of limiting factors such as erroneous and congested wireless channels (due to high mobility or uncoordinated channel-access), increasingly fragmented and congested spectrum, hardware imperfections, and anticipated growt…
Vehicular communications have stringent latency requirements on safety-critical information transmission. However, lack of instantaneous channel state information due to high mobility poses a great challenge to meet these requirements and the situation gets more complicated when packet retransmission is considered. Based on only the obtainable large-scale fading channel information, this paper performs spectrum and power allocation to maximize the ergodic capacity of vehicular-to-infrastructure (V2I) links while guaranteeing the latency requirements of vehicular-to-vehicular (V2V) links. First…
Driven by the rapid development of wireless communication system, more and more vehicular services can be efficiently supported via vehicle-to-everything (V2X) communications. In order to allocate radio resource with the reasonable implementation complexity in dense urban intersection, a two-stage allocation algorithm is proposed in this paper, whose main objective is to minimize delay and ensure reliability. In particular, as for the first stage, the allocation policy is based on traffic density information (TDI), which is different from utilizing channel state information (CSI) and queue sta…
Vehicular networks will play an important role in enhancing road safety, improving transportation efficiency, and providing seamless Internet service for users on the road. Reaping the benefit of vehicular networks is contingent upon meeting stringent wireless communication performance requirements, particularly in terms of delay and reliability. In this paper, a dependence control mechanism is proposed to improve the overall reliability of vehicular networks. In particular, the dependence between the communication delays of different vehicle-to-vehicle (V2V) links is first modeled. Then, the …
To efficiently support safety-related vehicular applications, the ultra-reliable and low-latency communication (URLLC) concept has become an indispensable component of vehicular networks (VNETs). Due to the high mobility of VNETs, exchanging near-instantaneous channel state information (CSI) and making reliable resource allocation decisions based on such short-term CSI evaluations are not practical. In this paper, we consider the downlink of a vehicle-to-infrastructure (V2I) system conceived for URLLC based on idealized perfect and realistic imperfect CSI. By exploiting the benefits of the mas…
Intel Labs（英特尔实验室）；Georgia Institute of Technology（佐治亚理工学院）；Zhejiang University（浙江大学）
It has been a long-held belief that judicious resource allocation is critical to mitigating interference, improving network efficiency, and ultimately optimizing wireless communication performance. The traditional wisdom is to explicitly formulate resource allocation as an optimization problem and then exploit mathematical programming to solve the problem to a certain level of optimality. Nonetheless, as wireless networks become increasingly diverse and complex, e.g., in the high-mobility vehicular networks, the current design methodologies face significant challenges and thus call for rethink…
Shanghai Institute for Advanced Communication and Data Science（上海先进通信与数据科学研究院）；Shanghai University（上海大学）
Ultra-Reliable and Low-Latency Communications (URLLC) services in vehicular networks on millimeter-wave bands present a significant challenge, considering the necessity of constantly adjusting the beam directions. Conventional methods are mostly based on classical control theory, e.g., Kalman filter and its variations, which mainly deal with stationary scenarios. Therefore, severe application limitations exist, especially with complicated, dynamic Vehicle-to-Everything (V2X) channels. This paper gives a thorough study of this subject, by first modifying the classical approaches, e.g., Extended…
The increasing demand for rich multimedia services and the emergence of the Internet-of-Things (IoT) pose challenging requirements for the next generation vehicular networks. Such challenges are largely related to high spectral efficiency and low latency requirements in the context of massive content delivery and increased connectivity. In this respect, caching and non-orthogonal multiple access (NOMA) paradigms have been recently proposed as potential solutions to effectively address some of these key challenges. In the present contribution, we introduce cache-aided NOMA as an enabling techno…
In this paper, the content service provision of information-centric vehicular networks (ICVNs) is investigated from the aspect of mobile edge caching, considering the dynamic driving-related context information. To provide up-to-date information with low latency, two schemes are designed for cache update and content delivery at the roadside units (RSUs). The roadside unit centric (RSUC) scheme decouples cache update and content delivery through bandwidth splitting, where the cached content items are updated regularly in a round-robin manner. The request adaptive (ReA) scheme updates the cached…
In this paper, we investigate the performance of LTE Multicast-Broadcast Single-Frequency Networks (MBSFN). LTE-MBSFN is viewed as one of the most promising candidates for vehicular communications which can enhance reliability of vehicular application traffic. This is achieved due to the possibility to efficiently support message exchange in-between vehicles by multicasting information to several vehicles in parallel (point-to-multipoint transmission) employing an Multimedia Broadcast/Multicast Service (MBMS). We investigate two metrics to gauge the performance of MBMS/MBSFN transmissions in c…
In this paper, the problem of joint power and resource allocation (JPRA) for ultra-reliable low-latency communication (URLLC) in vehicular networks is studied. Therein, the network-wide power consumption of vehicular users (VUEs) is minimized subject to high reliability in terms of probabilistic queuing delays. Using extreme value theory, a new reliability measure is defined to characterize extreme events pertaining to vehicles' queue lengths exceeding a predefined threshold. To learn these extreme events, assuming they are independently and identically distributed over VUEs, a novel distribut…
Vehicular communication systems have been an active subject of research for many years and are important technologies in the 5G and the post-5G era. One important use case is platooning which is seemingly the first step towards fully autonomous driving systems. Furthermore, a key performance parameter in all vehicular communication systems is the end-to-end packet latency. Towards this goal, full-duplex (FD) transceivers can potentially be an efficient and practical solution towards reducing the delay in platooning networks. In this paper, we study the delay performance of dynamic and TDMAbase…
Vehicular communications have attracted more and more attention recently from both industry and academia due to its strong potential to enhance road safety, improve traffic efficiency, and provide rich on-board information and entertainment services. In this paper, we discuss fundamental physical layer issues that enable efficient vehicular communications and present a comprehensive overview of the state-of-the-art research. We first introduce vehicular channel characteristics and modeling, which are the key underlying features differentiating vehicular communications from other types of wirel…
The proliferation of connected vehicles along with the high demand for rich multimedia services constitute key challenges for the emerging 5G-enabled vehicular networks. These challenges include, but are not limited to, high spectral efficiency and low latency requirements. Recently, the integration of cache-enabled networks with non-orthogonal multiple access (NOMA) has been shown to reduce the content delivery time and traffic congestion in wireless networks. Ac-cordingly, in this article, we envisage cache-aided NOMA as a technology facilitator for 5G-enabled vehicular networks. In particul…
Obtaining high quality sensor information is critical in vehicular emergencies. However, existing standards such as IEEE 802.11p/DSRC and LTE-A cannot support either the required data rates or the latency requirements. One solution to this problem is for municipalities to invest in dedicated base stations to ensure that drivers have the information they need to make safe decisions in or near accidents. In this paper we further propose that these municipality-owned base stations form a Single Frequency Network (SFN). In order to ensure that transmissions are reliable, we derive tight bounds on …
Vehicular communications essentially support automotive applications for safety and infotainment. For this reason, industry leaders envision an enhanced role of vehicular communications in the fifth generation of mobile communications technology. Over the years, the number of vehicle-mounted sensors has increased steadily, which potentially leads to more volume of critical data communications in a short time. Also, emerging applications such as remote/autonomous driving and infotainment such as high-definition movie streaming require data-rates on the order of multiple Gbit/s. Such high data-r…
With rising interest in autonomous vehicles, developing radio access technologies (RATs) that enable reliable and low latency vehicular communications has become of paramount importance. Dedicated Short Range Communications (DSRC) and Cellular V2X (C-V2X) are two present-day technologies that are capable of supporting day-1 vehicular applications. However, these RATs fall short of supporting communication requirements of many advanced vehicular applications, which are believed to be critical in enabling fully autonomous vehicles. Both DSRC and C-V2X are undergoing extensive enhancements in ord…
In this paper, we consider the mobile edge offloading scenario consisting of one mobile device (MD) with multiple independent tasks and various remote edge devices. In order to save energy, the user's device can offload the tasks to available access points for edge computing. Data compression is applied to reduce offloaded data size prior to wireless transmission to minimize the execution latency. The problem of jointly optimizing the task allocation decision and the data compression ratio to minimize the total tasks' execution latency and the MD's energy consumption concurrently is proposed. …
How to enhance the communication efficiency and quality on vehicular networks is one critical important issue. While with the larger and larger scale of vehicular networks in dense cities, the real-world datasets show that the vehicular networks essentially belong to the complex network model. Meanwhile, the extensive research on complex networks has shown that the complex network theory can both provide an accurate network illustration model and further make great contributions to the network design, optimization and management. In this paper, we start with analyzing characteristics of a taxi…
This paper investigates the resource allocation problem in device-to-device (D2D)-based vehicular communications, based on slow fading statistics of channel state information (CSI), to alleviate signaling overhead for reporting rapidly varying accurate CSI of mobile links. We consider the case when each vehicle-to-infrastructure (V2I) link shares spectrum with multiple vehicle-to-vehicle (V2V) links. Leveraging the slow fading statistical CSI of mobile links, we maximize the sum V2I capacity while guaranteeing the reliability of all V2V links. We propose a graph-based algorithm that uses graph…
With the rapid development of communications and computing, the concept of connected vehicles emerges to improve driving safety, traffic efficiency and infotainment experience. Due to the limited capabilities of sensors and information processing on a single vehicle, vehicular networks (VNETs) play a vital role for the realization of connected vehicles. To achieve the closer cooperation on the road, ultra-reliable and low-latency communications (URLLCs) become the indispensable components of future VNETs. However, traditional wireless networks are designed with the objective of maximizing spec…
Department of Electrical and Computer Engineering, New York University (NYU), Abu Dhabi（纽约大学（阿布扎比）电气与计算机工程系）
IEEE 802.11p standard defines wireless technology protocols that enable vehicular transportation and manage traffic efficiency. A major challenge in the development of this technology is ensuring communication reliability in highly dynamic vehicular environments, where the wireless communication channels are doubly selective, thus making channel estimation and tracking a relevant problem to investigate. In this paper, a novel deep learning (DL)-based weighted interpolation estimator is proposed to accurately estimate vehicular channels especially in high mobility scenarios. The proposed estima…
By offloading intensive computation tasks to the edge cloud located at the cellular base stations, mobile-edge computation offloading (MECO) has been regarded as a promising means to accomplish the ambitious millisecond-scale end-to-end latency requirement of the fifth-generation networks. In this paper, we investigate the latency-minimization problem in a multi-user time-division multiple access MECO system with joint communication and computation resource allocation. Three different computation models are studied, i.e., local compression, edge cloud compression, and partial compression offlo…
This paper investigates the spectrum sharing problem in vehicular networks based on multi-agent reinforcement learning, where multiple vehicle-to-vehicle (V2V) links reuse the frequency spectrum preoccupied by vehicle-to-infrastructure (V2I) links. Fast channel variations in high mobility vehicular environments preclude the possibility of collecting accurate instantaneous channel state information at the base station for centralized resource management. In response, we model the resource sharing as a multi-agent reinforcement learning problem, which is then solved using a fingerprint-based dee…
In this article, we investigate the cost-effective 5G-enabled vehicular networks to support emerging vehicular applications, such as autonomous driving, in-car infotainment and location-based road services. To this end, self-sustaining caching stations (SCSs) are introduced to liberate on-road base stations from the constraints of power lines and wired backhauls. Specifically, the cache-enabled SCSs are powered by renewable energy and connected to core networks through wireless backhauls, which can realize "drop-and-play" deployment, green operation, and low-latency services. With SCSs integra…
Provenance embedding algorithms are well known for tracking the footprints of information flow in wireless networks. Recently, low-latency provenance embedding algorithms have received traction in vehicular networks owing to strict deadlines on the delivery of packets. While existing low-latency provenance embedding methods focus on reducing the packet delay, they assume a complete graph on the underlying topology due to the mobility of the participating nodes. We identify that the complete graph assumption leads to sub-optimal performance in provenance recovery, especially when the vehicular …
Immersive social interactions of mobile users are soon to be enabled within a virtual space, by means of virtual reality (VR) technologies and wireless cellular systems. In a VR mobile social network, the states of all interacting users should be updated synchronously and with low latency via two-way communications with edge computing servers. The resulting end-to-end latency depends on the relationship between the virtual and physical locations of the wireless VR users and of the edge servers. In this work, the problem of analyzing and optimizing the end-to-end latency is investigated for a s…
