Driven by the rapid development of wireless communication system, more and more vehicular services can be efficiently supported via vehicle-to-everything (V2X) communications. In order to allocate radio resource with the reasonable implementation complexity in dense urban intersection, a two-stage allocation algorithm is proposed in this paper, whose main objective is to minimize delay and ensure reliability. In particular, as for the first stage, the allocation policy is based on traffic density information (TDI), which is different from utilizing channel state information (CSI) and queue state information (QSI) in the second stage. Moreover, in order to reflect the influence of TDI on delay, a macroscopic vehicular mobility model is employed in this paper. Simulation results show that the proposed algorithm can acquire an asymptotically optimal performance with the acceptable complexity.
Vehicular communications have stringent latency requirements on safety-critical information transmission. However, lack of instantaneous channel state information due to high mobility poses a great challenge to meet these requirements and the situation gets more complicated when packet retransmission is considered. Based on only the obtainable large-scale fading channel information, this paper performs spectrum and power allocation to maximize the ergodic capacity of vehicular-to-infrastructure (V2I) links while guaranteeing the latency requirements of vehicular-to-vehicular (V2V) links. First…
Vehicular networks, an enabling technology for Intelligent Transportation System (ITS), smart cities, and autonomous driving, can deliver numerous on-board data services, e.g., road-safety, easy navigation, traffic efficiency, comfort driving, infotainment, etc. Providing satisfactory Quality of Service (QoS) in vehicular networks, however, is a challenging task due to a number of limiting factors such as erroneous and congested wireless channels (due to high mobility or uncoordinated channel-access), increasingly fragmented and congested spectrum, hardware imperfections, and anticipated growt…
Intel Labs（英特尔实验室）；Georgia Institute of Technology（佐治亚理工学院）；Zhejiang University（浙江大学）
It has been a long-held belief that judicious resource allocation is critical to mitigating interference, improving network efficiency, and ultimately optimizing wireless communication performance. The traditional wisdom is to explicitly formulate resource allocation as an optimization problem and then exploit mathematical programming to solve the problem to a certain level of optimality. Nonetheless, as wireless networks become increasingly diverse and complex, e.g., in the high-mobility vehicular networks, the current design methodologies face significant challenges and thus call for rethink…
To efficiently support safety-related vehicular applications, the ultra-reliable and low-latency communication (URLLC) concept has become an indispensable component of vehicular networks (VNETs). Due to the high mobility of VNETs, exchanging near-instantaneous channel state information (CSI) and making reliable resource allocation decisions based on such short-term CSI evaluations are not practical. In this paper, we consider the downlink of a vehicle-to-infrastructure (V2I) system conceived for URLLC based on idealized perfect and realistic imperfect CSI. By exploiting the benefits of the mas…
The rapid development of the fifth generation mobile communication systems accelerates the implementation of vehicle-to-everything communications. Compared with the other types of vehicular communications, vehicle-to-vehicle (V2V) communications mainly focus on the exchange of driving safety information with neighboring vehicles, which requires ultra-reliable and low-latency communications (URLLCs). However, the frame size is significantly shortened in V2V URLLCs because of the rigorous latency requirements, and thus the overhead is no longer negligible compared with the payload information fr…
Autonomous vehicular platoons will play an important role in improving on-road safety in tomorrow's smart cities. Vehicles in an autonomous platoon can exploit vehicle-to-vehicle (V2V) communications to collect information, such as velocity and acceleration, from surrounding vehicles so as to maintain the target velocity and inter-vehicle distance. However, due to the dynamic on-vehicle data processing rate and the uncertainty of the wireless channel, V2V communications within a platoon will experience a delay. Such delay can impair the vehicles' ability to stabilize the operation of the plato…
Vehicular networks will play an important role in enhancing road safety, improving transportation efficiency, and providing seamless Internet service for users on the road. Reaping the benefit of vehicular networks is contingent upon meeting stringent wireless communication performance requirements, particularly in terms of delay and reliability. In this paper, a dependence control mechanism is proposed to improve the overall reliability of vehicular networks. In particular, the dependence between the communication delays of different vehicle-to-vehicle (V2V) links is first modeled. Then, the …
The vehicular edge computing (VEC) system integrates the computing resources of vehicles, and provides computing services for other vehicles and pedestrians with task offloading. However, the vehicular task offloading environment is dynamic and uncertain, with fast varying network topologies, wireless channel states and computing workloads. These uncertainties bring extra challenges to task offloading. In this work, we consider the task offloading among vehicles, and propose a solution that enables vehicles to learn the offloading delay performance of their neighboring vehicles while offloadin…
This paper develops a framework to study multi-hop relaying in a vehicular network consisting of vehicles and Road Side Units (RSUs), and the effect of this relaying on the network coverage and the communication delay. We use a stochastic geometry model that consists of a combination of Poisson Line Process (PLP) and 1D Poisson Point Process (PPP) to reliably characterize the vehicular network layout and the locations of the vehicles and the RSUs. Using this model, we analyze the effect of the different network parameters on the coverage provided by the RSUs to the vehicles. Then, we investiga…
In vehicular edge computing (VEC) system, some vehicles with surplus computing resources can provide computation task offloading opportunities for other vehicles or pedestrians. However, vehicular network is highly dynamic, with fast varying channel states and computation loads. These dynamics are difficult to model or to predict, but they have major impact on the quality of service (QoS) of task offloading, including delay performance and service reliability. Meanwhile, the computing resources in VEC are often redundant due to the high density of vehicles. To improve the QoS of VEC and exploi…
The increasing demand for rich multimedia services and the emergence of the Internet-of-Things (IoT) pose challenging requirements for the next generation vehicular networks. Such challenges are largely related to high spectral efficiency and low latency requirements in the context of massive content delivery and increased connectivity. In this respect, caching and non-orthogonal multiple access (NOMA) paradigms have been recently proposed as potential solutions to effectively address some of these key challenges. In the present contribution, we introduce cache-aided NOMA as an enabling techno…
In a vehicular edge computing (VEC) system, vehicles can share their surplus computation resources to provide cloud computing services. The highly dynamic environment of the vehicular network makes it challenging to guarantee the task offloading delay. To this end, we introduce task replication to the VEC system, where the replicas of a task are offloaded to multiple vehicles at the same time, and the task is completed upon the first response among replicas. First, the impact of the number of task replicas on the offloading delay is characterized, and the optimal number of task replicas is app…
Obtaining high quality sensor information is critical in vehicular emergencies. However, existing standards such as IEEE 802.11p/DSRC and LTE-A cannot support either the required data rates or the latency requirements. One solution to this problem is for municipalities to invest in dedicated base stations to ensure that drivers have the information they need to make safe decisions in or near accidents. In this paper we further propose that these municipality-owned base stations form a Single Frequency Network (SFN). In order to ensure that transmissions are reliable, we derive tight bounds on …
This paper investigates the resource allocation problem in device-to-device (D2D)-based vehicular communications, based on slow fading statistics of channel state information (CSI), to alleviate signaling overhead for reporting rapidly varying accurate CSI of mobile links. We consider the case when each vehicle-to-infrastructure (V2I) link shares spectrum with multiple vehicle-to-vehicle (V2V) links. Leveraging the slow fading statistical CSI of mobile links, we maximize the sum V2I capacity while guaranteeing the reliability of all V2V links. We propose a graph-based algorithm that uses graph…
In this paper, the problem of joint power and resource allocation (JPRA) for ultra-reliable low-latency communication (URLLC) in vehicular networks is studied. Therein, the network-wide power consumption of vehicular users (VUEs) is minimized subject to high reliability in terms of probabilistic queuing delays. Using extreme value theory, a new reliability measure is defined to characterize extreme events pertaining to vehicles' queue lengths exceeding a predefined threshold. To learn these extreme events, assuming they are independently and identically distributed over VUEs, a novel distribut…
How to enhance the communication efficiency and quality on vehicular networks is one critical important issue. While with the larger and larger scale of vehicular networks in dense cities, the real-world datasets show that the vehicular networks essentially belong to the complex network model. Meanwhile, the extensive research on complex networks has shown that the complex network theory can both provide an accurate network illustration model and further make great contributions to the network design, optimization and management. In this paper, we start with analyzing characteristics of a taxi…
This paper investigates the spectrum sharing problem in vehicular networks based on multi-agent reinforcement learning, where multiple vehicle-to-vehicle (V2V) links reuse the frequency spectrum preoccupied by vehicle-to-infrastructure (V2I) links. Fast channel variations in high mobility vehicular environments preclude the possibility of collecting accurate instantaneous channel state information at the base station for centralized resource management. In response, we model the resource sharing as a multi-agent reinforcement learning problem, which is then solved using a fingerprint-based dee…
Department of Electrical and Computer Engineering, New York University (NYU), Abu Dhabi（纽约大学（阿布扎比）电气与计算机工程系）
IEEE 802.11p standard defines wireless technology protocols that enable vehicular transportation and manage traffic efficiency. A major challenge in the development of this technology is ensuring communication reliability in highly dynamic vehicular environments, where the wireless communication channels are doubly selective, thus making channel estimation and tracking a relevant problem to investigate. In this paper, a novel deep learning (DL)-based weighted interpolation estimator is proposed to accurately estimate vehicular channels especially in high mobility scenarios. The proposed estima…
Vehicular networks are expected to support diverse content applications with multi-dimensional quality of service (QoS) requirements, which cannot be realized by the conventional one-fit-all network management method. In this paper, a service-oriented hierarchical soft slicing framework is proposed for the cache-enabled vehicular networks, where each slice supports one service and the resources are logically isolated but opportunistically reused to exploit the multiplexing gain. The performance of the proposed framework is studied in an analytical way considering two typical on-road content se…
The extension to millimeter-wave (mmWave) spectrum of communication frequency band makes it easy to implement a joint radar and communication system using single hardware. In this paper, we propose radar imaging based on the IEEE 802.11ad waveform for a vehicular setting. The necessary parameters to be estimated for inverse synthetic aperture radar (ISAR) imaging are sampled version of round-trip delay, Doppler shift, and vehicular velocity. The delay is estimated using the correlation property of Golay complementary sequences embedded on the IEEE 802.11ad preamble. The Doppler shift is first …
As a worldwide pandemic, the coronavirus disease-19 (COVID-19) has caused serious restrictions in people's social life, along with the loss of lives, the collapse of economies and the disruption of humanitarian aids. Despite the advance of technological developments, we, as researchers, have witnessed that several issues need further investigation for a better response to a pandemic outbreak. Therefore, researchers recently started developing ideas to stop or at least reduce the spread of the pandemic. While there have been some prior works on wireless networks for combating a pandemic scenari…
