Polycrystalline Sr$_3$OsO$_6$, which is an ordered double-perovskite insulator, is synthesized via solid-state reaction under high-temperature and high-pressure conditions of 1200 $^\circ$C and 6 GPa. The synthesis enables us to conduct a comparative study of the bulk form of Sr$_3$OsO$_6$ toward revealing the driving mechanism of 1000 K ferromagnetism, which has recently been discovered for epitaxially grown Sr$_3$OsO$_6$ films. Unlike the film, the bulk is dominated by antiferromagnetism rather than ferromagnetism. Therefore, robust ferromagnetic order appears only when Sr$_3$OsO$_6$ is under the influence of interfaces. A specific heat capacity of 39.6(9) 10$^{-3}$ J mol$^{-1}$ K$^{-2}$ is found at low temperatures ($<$17 K). This value is remarkably high, suggesting the presence of possible fermionic-like excitations at the magnetic ground state. Although the bulk and film forms of Sr$_3$OsO$_6$ share the same lattice basis and electrically insulating state, the magnetism is entirely different between them.
Transition metal oxide thin films show versatile electrical, magnetic, and thermal properties which can be tailored by deliberately introducing macroscopic grain boundaries via polycrystalline solids. In this study, we focus on the modification of the magnetic and thermal transport properties by fabricating single- and polycrystalline epitaxial SrRuO3 thin films using pulsed laser epitaxy. Using epitaxial stabilization technique with atomically flat polycrystalline SrTiO3 substrate, epitaxial polycrystalline SrRuO3 thin film with crystalline quality of each grain comparable to that of single-c…
The experimental data on the thermal properties of the nanostructured perovskite ferroelectrics are presented and analysed. The ability of the modified 3w method for specific heat measurements is discussed and illustrated by the thermal properties of the thin polycrystalline (BaTiO3 on fused SiO2, 50-1100 nm) and epitaxial (BaTiO3 on MgO, 50-500 nm) films. The similarity of specific heat, phase transition excess entropy evolution in polycrystalline films and nanograined ceramics is revealed. The data on the specific heat of epitaxial films show the extremely diffused anomaly near 400 K, the ph…
(001) oriented NiO/NiFe bilayers were grown on single crystal MgO (001) substrates by ion beam sputtering in order to determine the effect that the crystalline orientation of the NiO antiferromagnetic layer has on the magnetization curve of the NiFe ferromagnetic layer. Simple models predict no exchange anisotropy for the (001)-oriented surface, which in its bulk termination is magnetically compensated. Nonetheless exchange anisotropy is present in the epitaxial films, although it is approximately half as large as in polycrystalline films that were grown simultaneously. Experiments show that d…
We use ultra-high vacuum chemical vapor deposition to grow polycrystalline silicon carbide (SiC) on c-plane sapphire wafers which are then annealed between 1250 and 1450°C in vacuum to create epitaxial multilayer graphene (MLG). Despite the surface roughness and small domain size of the polycrystalline SiC, a conformal MLG film is formed. By planarizing the SiC prior to graphene growth, a reduction of the Raman defect band is observed in the final MLG. The graphene formed on polished SiC films also demonstrates significantly more ordered layer-by-layer growth and increased carrier mobility for…
Several SrTiO3 (STO) thin films without electrodes processed by pulsed laser deposition, of thicknesses down to 40 nm, were studied using infrared transmission and reflection spectroscopy. The complex dielectric responses of polar phonon modes, particularly ferroelectric soft mode, in the films were determined quantitatively. The compressed epitaxial STO films on (100) La0.18Sr0.82Al0.59-Ta0.41O3 substrates (strain 0.9%) show strongly stiffened phonon responses, whereas the soft mode in polycrystalline film on (0001) sapphire substrate shows a strong broadening due to grain boundaries and/or o…
About ten years after ferroelectricity was first reported in doped HfO2 polycrystalline films, there is tremendous interest in this material and ferroelectric oxides are once again in the spotlight of the memories industry. Great efforts are being made to understand and control ferroelectric properties. Epitaxial films, which have fewer defects and a more controlled microstructure than polycrystalline films, can be very useful for this purpose. Epitaxial films of ferroelectric HfO2 have been much less investigated, but after the first report in 2015 significant progress has been achieved. This…
The hot-electron attenuation length in Ni is measured as a function of energy across two different Schottky interfaces viz. a polycrystalline Si(111)/Au and an epitaxial Si(111)/NiSi_2 interface using ballistic electron emission microscopy (BEEM). For similarly prepared Si(111) substrates and identical Ni thickness, the BEEM transmission is found to be lower for the polycrystalline interface than for the epitaxial interface. However, in both cases, the hot-electron attenuation length in Ni is found to be the same. This is elucidated by the temperature-independent inelastic scattering, transmis…
Doping ferroelectric Hf0.5Zr0.5O2 with La is a promising route to improve endurance. However, the beneficial effect of La on the endurance of polycrystalline films may be accompanied by degradation of the retention. We have investigated the endurance - retention dilemma in La-doped epitaxial films. Compared to undoped epitaxial films, large values of polarization are obtained in a wider thickness range, whereas the coercive fields are similar, and the leakage current is substantially reduced. Compared to polycrystalline La-doped films, epitaxial La-doped films show more fatigue but there is no…
We report the successful electrical creation of spin polarization in p-type Si at room temperature by using an epitaxial MgO(001) tunnel barrier and Fe(001) electrode. Reflection high-energy electron diffraction observations revealed that epitaxial Fe/MgO(001) tunnel contacts can be grown on a (2 x 1) reconstructed Si surface whereas tunnel contacts grown on the (1 x 1) Si surface were polycrystalline. Transmission electron microscopy images showed a more flat interface for the epitaxial Fe/MgO/Si compared to that of the polycrystalline structure. For the Fe/MgO/p-Si devices, the Hanle and inv…
In this work the charge transport properties of charge ordered (CO) La1-xCaxMnO3 (LCMO) (x= 0.55, 0.67) epitaxial thin films and polycrystals are discussed following the recent controversy of localised electron states vs. weakly or de- localised charge density wave (CDW) states in CO manganites. The transport properties were investigated by current vs. voltage, direct current resistivity vs. temperature, local activation energy vs. temperature, magnetoresistance and admittance spectroscopy measurements, which all indicated a localised electronic structure in the single CO phase. Delocalised ch…
Ni-Mn-Ga films in the austenite and the martensite structures at room temperature have been obtained using the DC magnetron sputtering technique. Two elaboration processes were studied. A first batch of samples was deposited using a resist sacrificial layer in order to release the film from the substrate before vacuum annealing. This process leads to polycrystalline films with a strong (022) fiber texture. The martensitic phase transformation of such polycrystalline freestanding films has been studied by optical and scanning electron microscopy. A second batch of samples was grown epitaxially …
We studied polycrystalline B2-type Co2FeAl (CFA) full-Heusler alloy based magnetic tunnel junctions (MTJs) fabricated on a Si/SiO2 amorphous substrate. Polycrystalline CFA films with a (001) orientation, a high B2 ordering, and a flat surface were achieved using a MgO buffer layer. A tunnel magnetoresistance (TMR) ratio up to 175% was obtained for an MTJ with a CFA/MgO/CoFe structure on a 7.5-nm-thick MgO buffer. Spin-transfer torque induced magnetization switching was achieved in the MTJs with a 2-nm-thick polycrystalline CFA film as a switching layer. Using a thermal activation model, the in…
The temperature dependence of exchange bias properties are studied in polycrystalline $ \mathrm{BiFeO_3} / \mathrm{Ni_{81}Fe_{19}} $ bilayers, for different $ \mathrm{BiFeO_3} $ thicknesses. Using a field cooling protocol, a non-monotonic behavior of the exchange bias field is shown in the exchange-biased bilayers. Another thermal protocol, the Soeya protocol, related to the $ \mathrm{BiFeO_3} $ thermal activation energies was carried out and reveals a two-step evolution of the exchange bias field. The results of these two different protocols are similar to the ones obtained for measurements p…
Properties of complex oxide thin films can be tuned over a range of values as a function of mismatch, composition, orientation, and structure. Here, we report a strategy for growing structured epitaxial thermoelectric thin films leading to improved Seebeck coefficient. Instead of using single-crystal sapphire substrates to support epitaxial growth, Ca$_3$Co$_4$O$_9$ films are deposited, using the Pulsed Laser Deposition technique, onto Al$_2$O$_3$ polycrystalline substrates textured by Spark Plasma Sintering. The structural quality of the 2000 Åthin film was investigated by Transmission Electr…
Interlayer exchange couplings were examined for Co2FeAl0.5Si0.5(CFAS)/Cr/CFAS trilayered films grown on MgO (001) single crystal and thermally oxidized Si substrates. The films were (001) epitaxial on MgO and (110) textured polycrystalline on SiO2. Strong exchange couplings were observed for the films with the 1.5 nm thick Cr spacer layer. A 90 degree coupling is dominant in the (001) epitaxial film. In contrast, an antiparallel coupling exists in the polycrystalline one. The relationship of interlayer couplings with the structure is discussed.
We present results on growth of large area epitaxial ReS2 thin film both on c plane sapphire substrate and MoS2 template by pulsed laser deposition (PLD). Films tend to grow with (0001) ReS2 perpendicular to (0001) Al2O3 and (0001) ReS2 perpendicular to (0001) MoS2 parallel to (0001) Al2O3 at deposition temperature below 300 deg C. Films are polycrystalline grown at temperature above 300 deg C. The smoothness and quality of the films are significantly improved when grown on MoS2 template compared to sapphire substrate. The results show that PLD is suitable to grow ReS2 epitaxial thin film over…
Electrical transport properties of RNiO3 (R= Pr, Nd, Sm) thin films grown by pulse laser deposition have been studied. RNiO3 films grow in (100) direction on LaAlO3 (100) substrate. Unlike in polycrystalline solid, PrNiO3 film showed metallic behavior. The first order metal to insulator transition observed in polycrystalline solids is suppressed in RNiO3 films. The effect of lattice strain in the films influensing the transport properties has been studied by varying the thickness of PrNiO3 film on LaAlO3 and also by growing them on SrTiO3 and sapphire substrates. Deviation in the transport pro…
Graphene is attractive for spintronics due to its long spin life time and high mobility. So far only thick and polycrystalline slabs have been used as ferromagnetic electrodes. We report the growth of flat, epitaxial ultrathin Co films on graphene. These display perpendicular magnetic anisotropy in the thickness range 0.5-1nm, which is confirmed by theory. PMA, epitaxy and ultrathin thickness bring new perspectives for graphene-based spintronic devices such as the zero-field control of an arbitrary magnetization direction, band matching between electrodes and graphene, and interface effects su…
We report on epitaxial growth of single-phase [Pb(Zr0.57Ti0.43)O3]0.8[Pb(Fe2/3W1/3)O3]0.2 (PZT-PFW) solid-solution thin films using pulsed laser deposition. X-ray diffraction measurements reveal that the films have a tetragonal structure. The films exhibit ferroelectric properties and weak ferromagnetic responses at room temperature. Magnetoelectric effects were investigated; the nonlinear magnetoelectric coefficient was measured and found to be comparable to those of multiferroic hexagonal manganites, but at least two orders of magnitude smaller than that for polycrystalline PZT-PFW films.
Charge-to-spin conversion in epitaxial and polycrystalline Bi and Bi/Ag layers
ETH Zurich（苏黎世联邦理工学院）；Politecnico di Milano（米兰理工大学）；Instituto de Nanociencia y Materiales de Aragón, CSIC-Universidad de Zaragoza（阿拉贡纳米科学与材料研究所，西班牙科学委员会-萨拉戈萨大学）；Universidad de Zaragoza（萨拉戈萨大学）；CNR-Istituto di Struttura della Materia (CNR-ISM)（意大利国家研究委员会物质结构研究所）
Magnetic materials with kagome crystal structure exhibit rich physics such as frustrated magnetism, skyrmion formation, topological flat bands, and Dirac/Weyl points. Until recently, most studies on kagome magnets have been performed on bulk crystals or polycrystalline films. Here we report the synthesis of high-quality epitaxial films of topological kagome magnet Fe$_3$Sn$_2$ by atomic layer molecular beam epitaxy. Structural and magnetic characterization of Fe$_3$Sn$_2$ on epitaxial Pt(111) identifies highly ordered films with c-plane orientation and an in-plane magnetic easy axis. Studies o…
The metastable orthorhombic phase of hafnia is generally obtained in polycrystalline films, whereas in epitaxial films, its formation has been much less investigated. We have grown Hf0.5Zr0.5O2 films by pulsed laser deposition, and the growth window (temperature and oxygen pressure during deposition and film thickness) for epitaxial stabilization of the ferroelectric phase is mapped. The remnant ferroelectric polarization, up to around 24 uC/cm2, depends on the amount of orthorhombic phase and interplanar spacing and increases with temperature and pressure for a fixed film thickness. The leaka…
Ferromagnetic resonance has been used to study the magnetic properties and magnetization dynamics of polycrystalline Fe$_{1-x}$V$_{x}$ alloy films with $0\leq x < 0.7$. Films were produced by co-sputtering from separate Fe and V targets, leading to a composition gradient across a Si substrate. FMR studies were conducted at room temperature with a broadband coplanar waveguide at frequencies up to 50 GHz using the flip-chip method. The effective demagnetization field $4 πM_{\mathrm{eff}}$ and the Gilbert damping parameter $α$ have been determined as a function of V concentration. The results are…
We report herein fabrication and characterization of a thin-film transistor (TFT) using single-crystalline, epitaxial SrTiO3 film, which was grown by a pulsed laser deposition technique followed by the thermal annealing treatment in an oxygen atmosphere. Although TFTs on the polycrystalline epitaxial SrTiO3 films (as-deposited) exhibited poor transistor characteristics, the annealed single-crystalline SrTiO3 TFT exhibits transistor characteristics comparable with those of bulk single-crystal SrTiO3 FET: an on/off current ratio >10^5, sub-threshold swing ~2.1 V/decade, and field-effect mobility…
Chalcogenide perovskites have emerged as a new class of electronic materials, but fundamental properties and applications of chalcogenide perovskites remain limited by the lack of high quality epitaxial thin films. We report epitaxial thin film growth of BaZrS3, a prototypical chalcogenide, by pulsed laser deposition. X-ray diffraction studies show that the films are strongly textured out of plane and have a clear in-plane epitaxial relationship with the substrate. Electron microscopy studies confirm the presence of epitaxy for the first few layers of the film at the interface, even though awa…
Heteroepitaxial growth of selected group IV-VI nitrides on various orientations of sapphire (α-Al2O3) is demonstrated using atomic layer deposition. High quality, epitaxial films are produced at significantly lower temperatures than required by conventional deposition methods. Characterization of electrical and superconducting properties of epitaxial films reveals a reduced room temperature resistivity and increased residual resistance ratio (RRR) for films deposited on sapphire compared to polycrystalline samples deposited concurrently on fused quartz substrates.
We report on the generation and transport of thermal spin currents in fully epitaxial γ-Fe$_2$O$_3$/NiO(001)/Pt and Fe$_3$O$_4$/NiO(001)/Pt trilayers. A thermal gradient, perpendicular to the plane of the sample, generates a magnonic spin current in the ferrimagnetic maghemite (γ-Fe$_2$O$_3$) and magnetite (Fe$_3$O$_4$) thin films by means of the spin Seebeck effect. The spin current propagates across the epitaxial, antiferromagnetic insulating NiO layer, before being detected in the Pt layer by the inverse spin Hall effect. The transport of the spin signal is studied as a function of the NiO …
Ultra-thin Hf1-xZrxO2 films have attracted tremendous interest owing to their Si-compatible ferroelectricity arising from polar polymorphs. While these phases have been grown on Si as polycrystalline films, epitaxial growth was only achieved on non-Si substrates. Here we report direct epitaxy of polar phases on Si using pulsed laser deposition enabled via in situ scavenging of the native a-SiOx under ballistic conditions. On Si (111), polar rhombohedral (r)-phase and bulk monoclinic (m-) phase coexist, with the volume of the former increasing with increasing Zr concentration. R-phase is stabil…
Graphene is a 2D material that displays excellent electronic transport properties with prospective applications in many fields. Inducing and controlling magnetism in the graphene layer, for instance by proximity of magnetic materials, may enable its utilization in spintronic devices. This paper presents fabrication and detailed characterization of single-layer graphene formed on the surface of epitaxial FeRh thin films. The magnetic state of the FeRh surface can be controlled by temperature, magnetic field or strain due to interconnected order parameters. Characterization of graphene layers by…
We fabricate fully epitaxial Fe/ZnO/MgO/Fe magnetic tunnel junctions (MTJs) with a bilayer tunnel barrier, in which ZnO has a metastable rock-salt crystal structure. We observe a high magnetoresistance ratio up to 96% at room temperature (RT) and find that these MTJs have asymmetric current-voltage characteristics, and their rectifying performances are largely dependent on the magnetization alignments of the Fe electrodes. Diode responsibilities at a zero-bias voltage ($β_{0}$), which is an important performance index for harvesting applications, are observed up to 1.3 A/W at RT in the antipar…
The properties of photoemission electron sources determine the ultimate performance of a wide class of electron accelerators and photon detectors. To date, all high-efficiency visible-light photocathode materials are either polycrystalline or exhibit intrinsic surface disorder, both of which limit emitted electron beam brightness. In this letter we demonstrate the synthesis of epitaxial thin films of Cs$_3$Sb on 3C-SiC (001) using molecular-beam epitaxy. Films as thin as 4 nm have quantum efficiencies exceeding 2\% at 532 nm. We also find that epitaxial films have an order of magnitude larger …
Multiferroic BiFeO3 (BFO) / La0.7Sr0.3MnO3 heterostructured thin films were grown by pulsed laser deposition on polished spark plasma sintered LaAlO3 (LAO) polycrystalline substrates. Both polycrystalline LAO substrates and BFO films were locally characterized using electron backscattering diffraction (EBSD), which confirmed the high-quality local epitaxial growth on each substrate grain. Piezoforce microscopy was used to image and switch the piezo-domains, and the results are consistent with the relative orientation of the ferroelectric variants with the surface normal. This high-throughput s…
We apply the generic dynamical scaling theory (GDST) to the surfaces of CdTe polycrystalline films grown in glass substrates. The analysed data were obtained with a stylus profiler with an estimated resolution lateral resolution of $l_c=0.3 μ$m. Both real two-point correlation function and power spectrum analyses were done. We found that the GDST applied to the surface power spectra foresees faceted morphology in contrast with the self-affine surface indicated by the local roughness exponent found via the height-height correlation function. This inconsistency is explained in terms of convoluti…
Films of (111)-textured Cu, Ni, and Cu$_x$Ni$_y$ were evaluated as substrates for chemical vapor deposition of graphene. A metal thickness of 400 nm to 700 nm was sputtered onto a substrate of $α-$Al$_2$O$_3$(0001) at temperatures of 250 C to 650 C. The films were then annealed at 1000 C in a tube furnace. X-ray and electron backscatter diffraction measurements showed all films have (111) texture but have grains with in-plane orientations differing by $60^{\circ}$. The in-plane epitaxial relationship for all films was $[110]_{metal}$||$[10\bar{1}0]_{{Al}_{2}{O}_{3}}$. Reactive sputtering of Al…
We investigate the structure and magneto-transport properties of thin films of the Co_2Cr_xFe_(1-x)Al full-Heusler compound, which is predicted to be a half-metal by first-principles theoretical calculations. Thin films are deposited by magnetron sputtering at room temperature on various substrates in order to tune the growth from polycrystalline on thermally oxidized Si substrates to highly textured and even epitaxial on MgO(001) substrates, respectively. Our Heusler films are magnetically very soft and ferromagnetic with Curie temperatures up to 630 K. The total magnetic moment is reduced co…
We studied exchange bias in magnetic multilayers incorporating antiferromagent CoO doped with up to 35 atomic percent of Pt. The exchange bias increased with doping in epitaxial films, but did not significantly change in polycrystalline films at the lowest measured temperature of 5 K, and decreased at higher temperatures. We explain our results by the increased granularity of the doped antiferromagnetic films, resulting in simultaneous enhancement of the uncompensated spin density and reduction of the magnetic stability of antiferromagnetic grains.
Computationally guided high-throughput synthesis is used to explore the Zn-V-N phase space, resulting in the synthesis of a novel ternary nitride Zn$_2$VN$_3$. Following a combinatorial PVD screening, we isolate the phase and synthesize polycrystalline Zn$_2$VN$_3$ thin films with wurtzite structure on conventional borosilicate glass substrates. In addition, we demonstrate that cation-disordered, but phase-pure (002)-textured, Zn$_2$VN$_3$ thin films can be grown using epitaxial stabilization on α-Al2O3 (0001) substrates at remarkably low growth temperatures well below 200 °C. The structural p…
We present optimization of [(15 $\unicode{x212B}$) Ni$_{80}$Fe$_{20}$/(5 $\unicode{xC5}$) M]$_{20}$ single crystal multilayers on (001) MgO, with M being Cu, Cu$_{50}$Pt$_{50}$ and Pt. These superlattices were characterized by high-resolution X-ray reflectivity (XRR) and diffraction (XRD) as well as polar mapping of important crystal planes. It is shown that cube on cube epitaxial relationship can be obtained when depositing at the substrate temperature of 100 $^\circ$C regardless of the lattice mismatch (5% and 14% for Cu and Pt, respectively). At lower substrate temperatures poly-crystalline…
Simultaneous studies on the magnetic and electrotransport properties of Nd_{0.67} Sr_{0.33} Mn_{1-x} Fe_x O_3 polycrystalline bulk and epitaxial thin films (x = 0.00 and 0.05) have been carried out. A magnetoresistance (MR) as high as ~ 33% is observed for Nd_{0.67} Sr_{0.33} MnO_3 bulk at the metal-insulator transition (MIT) temperature (T_p) of 273 K in a magnetic field (H) of 10 kOe. Fe substitution at Mn sites reduces the ferromagnetic (FM) ordering temperature (T_c) and leads to an overall increase in MR. MR as high as ~ 90% is observed for thin film (x = 0.05) at H = 10 kOe with T_p = 10…
Single crystal metal films on insulating substrates are attractive for microelectronics and other applications, but they are difficult to achieve on macroscopic length scales. The conventional approach to obtaining such films is epitaxial growth at high temperature using slow deposition in ultrahigh vacuum conditions. Here we describe a different approach: sputter deposition at modest temperatures followed by annealing to induce secondary grain growth. We show that polycrystalline as-deposited Cu on α-Al2O3(0001) can be transformed into Cu(111) with centimeter-sized grains. Employing optical m…
Epitaxial films of Co40Fe40B20 (further - CoFeB) were grown on Bi2Te3(001) and Bi2Se3(001) substrates by laser molecular beam epitaxy (LMBE) technique at 200-400C. Bcc-type crystalline structure of CoFeB with (111) plane parallel to (001) plane of Bi2Te3 was observed, in contrast to polycrystalline CoFeB film formed on Bi2Se3(001) at RT using high-temperature seeding layer. Therefore, structurally ordered ferromagnetic thin films were obtained on the topological insulator surface for the first time. Using high energy electron diffraction (RHEED) 3D reciprocal space mapping, epitaxial relations…
We classify the switching kinetics of ferroelectrics including both epitaxial/polycrystalline thin films and single-crystalline/ceramic bulks at various applied fields into four categories, depending on whether the depolarization field and/or the polarization reversal induced by the switching promotion effect between adjacent parts can be neglected. We show that our statistical model developed very recently [Journal of Physics: Condensed Matter 21, 012207 (2009)] in its generalized form applies to all these four categories. Finally we make the comparison between our model and the conventional …
Large in-plane optical anisotropy in epitaxial CrN(113) films
Paul-Drude-Institut für Festkörperelektronik, Leibniz-Institut im Forschungsverbund Berlin e.V.（柏林莱布尼茨固体电子学保罗·德鲁德研究所）；Department of Physics, Kenyon College（肯扬学院物理系）
Engineering Grain Boundary Commensurability for Ferroelectric Stabilization in Hafnia-Based Films
Rice University（莱斯大学）；Rice Advanced Materials Institute, Rice University（莱斯大学先进材料研究所）；University of Pennsylvania（宾夕法尼亚大学）；Texas A&M University（德克萨斯农工大学）；University of California, Berkeley（加州大学伯克利分校）；Advanced Photon Source, Argonne National Laboratory（阿贡国家实验室先进光子源）；Smalley-Curl Institute, Rice University（莱斯大学斯马利-柯尔研究所）
The current method of growing large-area graphene on Cu surfaces (polycrystalline foils and thin films) and its transfer to arbitrary substrates is technologically attractive. However, the quality of graphene can be improved significantly by growing it on single-crystal Cu surfaces. Here we show that high quality, large-area graphene can be grown on epitaxial single-crystal Cu(111) thin films on reusable basal-plane sapphire (alpha-Al2O3(0001)) substrates and then transferred to another substrate. While enabling graphene growth on Cu single-crystal surfaces, this method has the potential to av…
High-dielectric-constant CaCu3Ti4O12 (CCTO) thin films were prepared on Pt/Ti/SiO2/Si(100) substrates by pulsed-laser deposition. The 480 nm thick polycrystalline films have preferred orientation and show obvious crystallization on the surface. The temperature-dependence of dielectric constant and loss of the Pt/CCTO/Pt capacitors is comparable with that of epitaxial CCTO films grown on oxides substrates. We found that the dielectric properties are very sensitive to the post-annealing atmosphere and temperature. Post-annealing in nitrogen atmosphere produces larger low-frequency dielectric rel…
Cryogenic-temperature Grain-to-grain Epitaxial Growth of High-quality Ultrathin CoFe Layer on MgO Tunnel Barrier for High-performance Magnetic Tunnel Junctions
A foundation of the modern technology that uses single-crystal silicon has been the growth of high-quality single-crystal Si ingots with diameters up to 12 inches or larger. For many applications of graphene, large-area high-quality (ideally of single-crystal) material will be enabling. Since the first growth on copper foil a decade ago, inch-sized single-crystal graphene has been achieved. We present here the growth, in 20 minutes, of a graphene film of 5 x 50 cm2 dimension with > 99% ultra-highly oriented grains. This growth was achieved by: (i) synthesis of sub-metre-sized single-crystal Cu…
We compare chemical solution deposition (CSD), and pulsed-laser-deposition (PLD), specimens of the new room-temperature, single-phase, multiferroic magnetoelectric, [PbFe2/3W1/3O3]x[PbZr0.53Ti0.47O3]1-x (PZTFWx ~ 0.40<x<0.20) with polarization, loss (<1%), and resistivity (typically 108 ohm.cm) equal to or superior to BiFeO3. Single phase polycrystalline multiferroics PZTFWx thin films were fabricated on platinized silicon substrate by CSD and as epitaxial single-crystal films on MgO substrate by PLD. High dielectric constants (1200- 3000), high polarization (30 - 60 micro C/cm2), weak saturat…
Hexagonal boron nitride (hBN) has been grown on sapphire substrates by ultra-high temperature molecular beam epitaxy (MBE). A wide range of substrate temperatures and boron fluxes have been explored, revealing that high crystalline quality hBN layers are grown at high substrate temperatures, $>$1600$^\circ$C, and low boron fluxes, $\sim1\times10^{-8}$ Torr beam equivalent pressure. \emph{In-situ} reflection high energy electron diffraction (RHEED) revealed the growth of hBN layers with $60^\circ$ rotational symmetry and the $[11\bar20]$ axis of hBN parallel to the $[1\bar100]$ axis of the sapp…
