The flatness, compactness and high-capacity data storage capability make metasurfaces well-suited for holographic information recording and generation. However, most of the metasurface holograms are static, not allowing a dynamic modification of the phase profile after fabrication. Here, we propose and demonstrate a dynamic metasurface hologram by utilizing hierarchical reaction kinetics of magnesium upon a hydrogenation/dehydrogenation process. The metasurface is composed of composite gold/magnesium V-shaped nanoantennas as building blocks, leading to a reconfigurable phase profile in a hydrogen/oxygen environment. We have developed an iterative hologram algorithm based on the Fidoc method to build up a quantified phase relation, which allows the reconfigurable phase profile to reshape the reconstructed image. Such a strategy introduces actively controllable dynamic pixels through a hydrogen-regulated chemical process, showing unprecedented potentials for optical encryption, information processing and dynamic holographic image alteration.
We demonstrate reconfigurable phase-only computer-generated metasurface holograms with one, two, or three image planes operating in the visible regime on a stretchable polydimethylsiloxane substrate. Stretching the substrate enlarges the hologram image and changes the location of the image plane. Upon stretching, these devices can switch the displayed holographic image between multiple distinct images. This work opens up the possibilities for stretchable metasurface holograms as flat devices for dynamically reconfigurable optical communication and display. It also confirms that metasurfaces on…
Metasurface holograms are typically fabricated on rigid substrates. Here we experimentally demonstrate broadband, flexible, conformable, helicity multiplexed metasurface holograms operating in the visible range, offering increased potential for real life out-of-the-lab applications. Two symmetrically distributed holographic images are obtained when circularly polarized light impinges on the reflective-type metasurface positioned on non- planar targets. The two off-axis images with high fidelity are interchangeable by controlling the helicity of incident light. Our metasurface features the arra…
Phase, polarization, amplitude and frequency represent the basic dimensions of light, playing crucial roles for both fundamental light-mater interactions and all major optical applications. Metasurface emerges as a compact platform to manipulate these knobs, but previous metasurfaces have limited flexibility to simultaneous control them. Here, we introduce a multi-freedom metasurface that can simultaneously and independently modulate phase, polarization and amplitude in an analytical form, and further realize frequency multiplexing by a k-space engineering technique. The multi-freedom metasurf…
We propose a new class of computer generated holograms whose far fields possess designer-specified polarization response. We dub these Jones matrix holograms. We provide a simple procedure for their implementation using form-birefringent metasurfaces. Jones matrix holography generalizes a wide body of past work with a consistent mathematical framework, particularly in the field of metasurfaces, and suggests previously unrealized devices, examples of which are demonstrated here. In particular, we demonstrate holograms whose far-fields implement parallel polarization analysis and custom waveplat…
Metasurfaces enable manipulation of light propagation at an unprecedented level, benefitting from a number of merits unavailable to conventional optical elements, such as ultracompactness, precise phase and polarization control at deep subwavelength scale, and multifunctionalities. Recent progress in this field has witnessed a plethora of functional metasurfaces, ranging from lenses and vortex beam generation to holography. However, research endeavors have been mainly devoted to static devices, exploiting only a glimpse of opportunities that metasurfaces can offer. We demonstrate a dynamic met…
Secret sharing is a well-established cryptographic primitive for storing highly sensitive information like encryption keys for encoded data. It describes the problem of splitting a secret into different shares, without revealing any information about the secret to its shareholders. Here, we demonstrate an all-optical solution for secret sharing based on metasurface holography. In our concept, metasurface holograms are used as spatially separable shares that carry an encrypted message in form of a holographic image. Two of these shares can be recombined by bringing them close together. Light pa…
Establishing and approaching the fundamental limit of orbital angular momentum (OAM) multiplexing are necessary and increasingly urgent for current multiple-input multiple-output research. In this work, we elaborate the fundamental limit in terms of independent scattering channels (or degrees of freedom of scattered fields) through angular-spectral analysis, in conjunction with a rigorous Green function method. The scattering channel limit is universal for arbitrary spatial mode multiplexing, which is launched by a planar electromagnetic device, such as antenna, metasurface, etc, with a predef…
Metasurface-generated holography has emerged as a promising route for fully reproducing vivid scenes by manipulating the optical properties of light using ultra-compact devices. However, achieving multiple holographic images using a single metasurface is still difficult due to the capacity limit of a single meta-atom. In this work, we present an inverse design method based on gradient-descent optimization to encode multiple pieces of holographic information into a single metasurface. The proposed method allows the inverse design of single-celled metasurfaces without the need for complex meta-a…
Reconstruction of light profiles with amplitude and phase information, called holography, is an attractive optical technique to display three-dimensional images. Due to essential requirements for an ideal hologram, subwavelength control of both amplitude and phase is crucial. Nevertheless, traditional holographic devices have suffered from their limited capabilities of incomplete modulation in both amplitude and phase of visible light. Here, we propose a novel metasurface that is capable of completely controlling both amplitude and phase profiles of visible light independently with subwaveleng…
Metasurfaces with spatially varying subwavelength structures enable full control of electromagnetic waves over a wide spectrum. High-efficiency metasurfaces, especially in a transmission mode, are of practical significance in optical elements and systems, hitherto their operating frequencies have been expanded down to visible-wavelength ranges. Challenges of developing shorter-wavelength metasurfaces originate from electromagnetic loss caused by strong absorption for most high-refractive-index materials. Here we introduce a large-bandgap semiconductor material-niobium pentoxide (Nb2O5)-to engi…
Since its invention, holography has emerged as a powerful tool to fully reconstruct the wavefronts of light including all the fundamental properties (amplitude, phase, polarization, wave vector, and frequency). For exploring the full capability for information storage/display and enhancing the encryption security of metasurface holograms, smart multiplexing techniques together with suitable metasurface designs are highly demanded. Here, we integrate multiple polarization manipulation channels for various spatial phase profiles into a single birefringent vectorial hologram by completely avoidin…
Holographic technologies have the potentiality to impact our everyday life in many sectors including science, education, entertainment, art, and healthcare. Although holographic screens and projectors are part of common imagination since long time, they are still at initial stages of development and integration. Recent achievements of metasurface and flat optics research gave an unprecedented strength to this field, overcoming critical aspects as efficiency, size and flexibility of conventional optics and liquid crystal technologies. However, although diffractive and metasurface holographic pr…
We report a THz reflectarray metasurface which uses graphene as active element to achieve beam steering, shaping and broadband phase modulation. This is based on the creation of a voltage controlled reconfigurable phase hologram, which can impart different reflection angles and phases to an incident beam, replacing bulky and fragile rotating mirrors used for terahertz imaging. This can also find applications in other regions of the electromagnetic spectrum, paving the way to versatile optical devices including light radars, adaptive optics, electro-optical modulators and screens.
Four-channel Imaging Based on Reconfigurable Metasurfaces: Hyperchaotic Encryption under Physical Protection
School of Information Engineering, Nanchang University（南昌大学信息工程学院）；Institute for Advanced Study, Nanchang University（南昌大学高等研究院）；Jiluan Academy, Nanchang University（南昌大学极链学院）
Hologram is an ideal method for naked eye three-dimensional (3D) display, and computer-generated holography (CGH) makes it possible to reconstruct virtual objects. However, the large pixel size of common CGH devices results in shortages in the applications of hologram, such as narrow field of view, twin images, multi-diffraction orders, et al. Meanwhile, metasurfaces consisted of subwavelength structures show great potential in controlling of light which is suitable for hologram design. There are many inspired works to achieve dynamic meta-hologram as we summary in this paper. And it can be co…
Metasurfaces possess the outstanding ability to tailor phase, amplitude and even spectral responses of light with an unprecedented ultrahigh resolution, thus have attracted significant interests. Here, we propose and experimentally demonstrate a novel meta-device that integrates color printing and computer-generated holograms within a single-layer dielectric metasurface by modulating spectral and spatial responses at subwavelength scale, simultaneously. In our design, such metasurface appears as a microscopic color image under white light illumination, while encrypting two different holographi…
Polarisation holography generally demands polarisation-sensitive holograms for reconstructing either polarisation-multiplexed holographic images or polarisation-sensitive image channels. To date, polarisation holography is underpinned by the Jones matrix method that uses birefringent holograms, including ultrathin metasurface holograms, limiting the polarisation control to orthogonal polarisation states. Here I introduce a novel concept of vectorial wavefront holography by exploiting the wavefront shaping of a structured vector beam. I will show that a phase hologram can be used to tailor the …
Subwavelength structured surfaces, known as metasurfaces, hold promise for future compact and optically thin devices with versatile functionalities. Here, by revisiting the concept of detour phase at the basis of the first computer generated holograms we have designed high-performance transmissive dielectric meta-holograms with new functionalities. In one class of such devices wavelength- independent phase masks have been generated by compensating the inherent dispersion of the detour phase with that of the subwavelength structures. This leads to broadband operation from the visible to the nea…
Metasurfaces are planar structures that locally modify the polarization, phase, and amplitude of light in reflection or transmission, thus enabling lithographically patterned flat optical components with functionalities controlled by design. Transmissive metasurfaces are especially important, as most optical systems used in practice operate in transmission. Several types of transmissive metasurfaces have been realized, but with either low transmission efficiencies or limited control over polarization and phase. Here we show a metasurface platform based on high-contrast dielectric elliptical na…
Metasurfaces are planar structures that can manipulate the amplitude, phase and polarization (APP) of light at subwavelength scale. Although various functionalities have been proposed based on metasurface, a most general optical control, i.e., independent complex-amplitude (amplitude and phase) control of arbitrary two orthogonal states of polarizations, has not yet been realized. Such level of optical control can not only cover the various functionalities realized previously, but also enable new functionalities that are not feasible before. Here, we propose a single-layer dielectric metasurfa…
In this work, we present the computational simulations of holographic metasurfaces to generation of the optical non-diffracting beams. The metasurfaces are designed by the holographic technique and the computer-generated holograms (CGHs) of optical non-diffracting beams are generated computationally. These holographic metasurfaces (HMS) are obtained by modeling a periodic lattice of metallic patches on dielectric substrates with sub-wavelength dimensions, where each one of those unit cells change the phase of the incoming wave. We use the surface impedance (Z) to control the phase of the elect…
Metasurfaces with local phase tuning by subwavelength elements promise unprecedented possibilities for ultra-thin and multifunctional optical devices, in which geometric phase design is widely used due to its resonant-free and large tolerance in fabrications. By arranging the orientations of anisotropic nano-antennas, the geometric phase-based metasurfaces can convert the incident spin light to its orthogonal state, and enable flexible wavefront engineering together with the function of a half-wave plate. Here, by incorporating the propagation phase, we realize another important optical device…
Laser printing with a spatial light modulator (SLM) has several advantages over conventional raster-writing and dot-matrix display (DMD) writing: multiple pixel exposure, high power endurance and existing software for computer generated holograms (CGH). We present a technique for the design and manufacturing of plasmonic metasurfaces based on ultrafast laser printing with an SLM. As a proof of principle, we have used this technique to laser print a plasmonic metalens as well as high resolution plasmonic color decorations. The high throughput holographic resonant laser printing (HRLP) approach …
Metasurface-based color display and holography have greatly advanced the state of the art display technologies. To further enrich the metasurface functionalities, recently a lot of research endeavors have been made to combine these two display functions within a single device. However, so far such metasurfaces have remained static and lack tunability once the devices are fabricated. In this work, we demonstrate a dynamic dual-function metasurface device at visible frequencies. It allows for switching between dynamic holography and dynamic color display, taking advantage of the reversible phase…
Nonlinear wavefront control is a crucial requirement in realizing nonlinear optical applications with metasurfaces. Numerous aspects of nonlinear frequency conversion and wavefront control have been demonstrated for plasmonic metasurfaces. However, several disadvantages limit their applicability in nonlinear nanophotonics, including high dissipative loss and low optical damage threshold. In contrast, it has been shown that metasurfaces made of high-index dielectrics can provide strong nonlinear responses. Regardless of the recent progress in nonlinear optical processes using all-dielectric nan…
Plasmonic metasurfaces are able to modify the wavefront by altering the light intensity, phase and polarization state. Active plasmonic metasurfaces would allow dynamic modulation of the wavefront which give rise to interesting application such as beam-steering, holograms and tunable waveplates. Graphene is an interesting material with dynamic property which can be controlled by electrical gating at an ultra-fast speed. We use a graphene-integrated metasurface to induce a tunable phase change to the wavefront. The metasurface supports a Fano resonance which produces high-quality resonances aro…
Optical metasurfaces are perfect candidates for the phase and amplitude modulation of light, featuring an excellent basis for holographic applications. In this work, we present a dual amplitude holographic scheme based on the photon sieve principle, which is then combined with a phase hologram by utilizing the Pancharatnam-Berry phase. We demonstrate that two types of apertures, rectangular and square shapes in a gold film filled with silicon nanoantennas are sufficient to create two amplitude holograms at two different wavelengths in the visible, multiplexed with an additional phase-only holo…
Metasurfaces are optically thin metamaterials that promise complete control of the wavefront of light but are primarily used to control only the phase of light. Here, we present an approach, simple in concept and in practice, that uses meta-atoms with a varying degree of form birefringence and rotation angles to create high-efficiency dielectric metasurfaces that control both the optical amplitude and phase at one or two frequencies. This opens up applications in computer-generated holography, allowing faithful reproduction of both the phase and amplitude of a target holographic scene without …
Metasurfaces, composed of subwavelength scattering elements, have demonstrated remarkable control over the transmitted amplitude, phase, and polarization of light. However, manipulating the amplitude upon transmission has required loss if a single metasurface is used. Here, we describe high-efficiency independent manipulation of the amplitude and phase of a beam using two lossless phase-only metasurfaces separated by a distance. With this configuration, we experimentally demonstrate optical components such as combined beam-forming and splitting devices, as well as those for forming complex-val…
The emerging applications of silicon photonics in free space, such as LiDARs and quantum photonics, urge versatile emission shaping beyond the capabilities of conventional grating couplers. A platform that offers arbitrary shaping of free-space emission while maintaining the CMOS compatibility and monolithic integration is in pressing need. Here we demonstrate a platform that integrates metasurfaces monolithically on silicon photonic integrated circuits. The metasurfaces consist of amorphous silicon nanopillars evanescently coupled to silicon waveguides. We demonstrate experimentally diffracti…
Switchable and active metasurfaces allow for the realization of beam steering, zoomable metalenses, or dynamic holography. To achieve this goal, one has to combine high-performance metasurfaces with switchable materials that exhibit high refractive index contrast and high switching speeds. In this work, we present an electrochemically switchable metasurface for beam steering where we use the conducting polymer poly(3,4-ethylene-dioxythiophene) (PEDOT) as an active material. We show beam diffraction with angles up to 10° and change of the intensities of the diffracted and primary beams employin…
We present a hybrid device platform for creating an electrically reconfigurable metasurface formed by the integration of plasmonic nanostructures with phase-change material germanium antimony telluride (GST). By changing the phase of GST from amorphous to crystalline through Joule heating, a large range of responses from the metasurface can be achieved. Furthermore, by using the intermediate phases of GST, the metasurface can interact with the incident light in both over-coupling and under-coupling regimes, leading to an inherently broadband response. Through a detailed investigation of the na…
Metasurfaces composed of planar arrays of sub-wavelength artificial structures show promise for extraordinary light manipulation; they have yielded novel ultrathin optical components such as flat lenses, wave plates, holographic surfaces and orbital angular momentum manipulation and detection over a broad range of electromagnetic spectrum. However the optical properties of metasurfaces developed to date do not allow for versatile tunability of reflected or transmitted wave amplitude and phase after fabrication, thus limiting their use in a wide range of applications. Here, we experimentally de…
Augmented reality (AR) has the potential to revolutionize the way in which information is presented by overlaying virtual information onto a person's direct view of their real-time surroundings. By placing the display on the surface of the eye, a contact lens display (CLD) provides a versatile solution for compact AR. However, an unaided human eye cannot visualize patterns on the CLD simply because of the limited accommodation of the eye. Here, we introduce a holographic display technology that casts virtual information directly to the retina so that the eye sees it while maintaining the visua…
All-dielectric optical metasurfaces can locally control the amplitude and phase of light at the nanoscale, enabling arbitrary wavefront shaping. However, lack of post-fabrication tunability has limited the true potential of metasurfaces for many applications. Here, we utilize a thin liquid crystal (LC) layer as a tunable medium surrounding the metasurface to achieve a phase-only spatial light modulator (SLM) with high reflection in the visible frequency, exhibiting an active and continuous resonance tuning with associated 2pi phase control and uncoupled amplitude. Dynamic wavefront shaping is …
Forming a desired optical field distribution from a given source requires precise spatial control of a field's amplitude and phase. Low-loss metasurfaces that allow extreme phase and polarization control of optical fields have been demonstrated over the past few years. However, metasurfaces that provide amplitude control have remained lossy, utilizing mechanisms such as reflection, absorption, or polarization loss to control amplitude. Here, we describe the amplitude and phase manipulation of optical fields without loss, by using two lossless phase-only metasurfaces separated by a distance. We…
A metasurface hologram combines fine spatial resolution and large viewing angles with a planar form factor and compact size. However, it suffers coherent artifacts originating from electromagnetic cross-talk between closely packed meta-atoms and fabrication defects of nanoscale features. Here, we introduce an efficient method to remove all artifacts by fine-tuning the spatial coherence of illumination. Our method is implemented with a degenerate cavity laser, which allows precise, continuous tuning of spatial coherence over a wide range with little variation in emission spectrum and total powe…
Novel display technologies aim at providing the users with increasingly immersive experiences. In this regard, it is a long-sought dream to generate three-dimensional (3D) scenes with high resolution and continuous depth, which can be overlaid with the real world. Current attempts to do so, however, fail in providing either truly 3D information, or a large viewing area and angle, strongly limiting the user immersion. Here, we report a proof-of-concept solution for this problem, and realize a compact holographic 3D near-eye display with a large exit pupil of 10mm x 8.66mm. The 3D image is gener…
Multiplexed planar printings, made of single or few layer micro and nano optical platforms, are essential for high capacity display, information storage and encryption. Although having been developed rapidly, the demonstrated channels are still limited and also lack instantaneity. Here, holograms and printings, always regarded as two independent information coding domains with totally different principles, are combined together through our proposed angle multiplexing framework, leading to multiplexed printings with hundreds of channels. Based on such approach, we experimentally encode respecti…
Two-Photon-Induced Direct 3D Printing of Freeform High-Index Phase-Change Sb2S3 Nanostructures
Leibniz Institute of Photonic Technology (IPHT)（莱布尼茨光子技术研究所）；Institute of Physical Chemistry, Friedrich Schiller University Jena (FSU)（耶拿弗里德里希·席勒大学物理化学研究所）；Functional Optical Surfaces and Coatings, Fraunhofer IOF（弗劳恩霍夫光学表面和涂层研究所）；Abbe Center of Photonics and Faculty of Physics, FSU（耶拿弗里德里希·席勒大学阿贝光学中心及物理学院）；Otto Schott Institute of Material Research, FSU（耶拿弗里德里希·席勒大学奥托·肖特材料研究所）；Jena Center for Soft Matter (JCSM), FSU（耶拿弗里德里希·席勒大学软物质研究中心）；Research Center for Applied Sciences, Academia Sinica（中央研究院应用科学研究中心）；Department of Electrophysics, National Yang Ming Chiao Tung University（国立阳明交通大学电子物理系）
