Metasurfaces possess the outstanding ability to tailor phase, amplitude and even spectral responses of light with an unprecedented ultrahigh resolution, thus have attracted significant interests. Here, we propose and experimentally demonstrate a novel meta-device that integrates color printing and computer-generated holograms within a single-layer dielectric metasurface by modulating spectral and spatial responses at subwavelength scale, simultaneously. In our design, such metasurface appears as a microscopic color image under white light illumination, while encrypting two different holographic images that can be projected at the far-field when illuminated with red and green laser beams. We choose amorphous silicon dimers and nanofins as building components and use a modified parallel Gerchberg-Saxton algorithm to obtain multiple sub-holograms with arbitrary spatial shapes for image-indexed arrangements. Such a method can further extend the design freedom of metasurfaces. By exploiting spectral and spatial control at the level of individual pixels, multiple sets of independent information can be introduced into a single-layer device, the additional complexity and enlarged information capacity are promising for novel applications such as information security and anti-counterfeiting.
Laser printing with a spatial light modulator (SLM) has several advantages over conventional raster-writing and dot-matrix display (DMD) writing: multiple pixel exposure, high power endurance and existing software for computer generated holograms (CGH). We present a technique for the design and manufacturing of plasmonic metasurfaces based on ultrafast laser printing with an SLM. As a proof of principle, we have used this technique to laser print a plasmonic metalens as well as high resolution plasmonic color decorations. The high throughput holographic resonant laser printing (HRLP) approach …
Metasurface-based color display and holography have greatly advanced the state of the art display technologies. To further enrich the metasurface functionalities, recently a lot of research endeavors have been made to combine these two display functions within a single device. However, so far such metasurfaces have remained static and lack tunability once the devices are fabricated. In this work, we demonstrate a dynamic dual-function metasurface device at visible frequencies. It allows for switching between dynamic holography and dynamic color display, taking advantage of the reversible phase…
Metasurface holography, the reconstruction of holographic images by modulating the spatial amplitude and phase of light using metasurfaces, has emerged as a next-generation display technology. However, conventional fabrication techniques used to realize metaholograms are limited by their small patterning areas, high manufacturing costs, and low throughput, which hinder their practical use. Herein, we demonstrate a high efficiency hologram using a one-step nanomanufacturing method with a titanium dioxide nanoparticle-embedded-resin, allowing for high-throughput and low-cost fabrication. At a si…
Metasurfaces enable manipulation of light propagation at an unprecedented level, benefitting from a number of merits unavailable to conventional optical elements, such as ultracompactness, precise phase and polarization control at deep subwavelength scale, and multifunctionalities. Recent progress in this field has witnessed a plethora of functional metasurfaces, ranging from lenses and vortex beam generation to holography. However, research endeavors have been mainly devoted to static devices, exploiting only a glimpse of opportunities that metasurfaces can offer. We demonstrate a dynamic met…
Plasmonic colour printing based on engineered metasurfaces has revolutionized colour display science due to its unprecedented subwavelength resolution and high-density optical data storage. However, advanced plasmonic displays with novel functionalities including dynamic multicolour printing, animations, and highly secure encryption have remained in their infancy. Here we demonstrate a dynamic plasmonic colour display technique that enables all the aforementioned functionalities using catalytic magnesium metasurfaces. Controlled hydrogenation and dehydrogenation of the constituent magnesium na…
Structural colors generated due to light scattering from static all-dielectric metasurfaces have successfully enabled high-resolution, high-saturation and wide-gamut color printing applications. Despite recent advances, most demonstrations of these structure-dependent colors lack post-fabrication tunability that hinders their applicability for front-end dynamic display technologies. Phase-change materials (PCMs), with significant contrast of their optical properties between their amorphous and crystalline states, have demonstrated promising potentials in reconfigurable nanophotonics. Herein, w…
While nanoscale color generations have been studied for years, the high performance transmission structural color, simultaneously equipped with large gamut, high resolution, and optical multiplexing abilities, still remains as a hanging issue. Here, a silicon metasurface embedded Fabry-Pérot cavity is demonstrated to address this problem. By changing the planar geometries of metasurface units, the cavities provide transmission colors with 194% sRGB gamut coverage and 141111 DPI resolution, along with more than 300% enhanced angular tolerance. Such high density allows two-dimensional color mixi…
Polarisation holography generally demands polarisation-sensitive holograms for reconstructing either polarisation-multiplexed holographic images or polarisation-sensitive image channels. To date, polarisation holography is underpinned by the Jones matrix method that uses birefringent holograms, including ultrathin metasurface holograms, limiting the polarisation control to orthogonal polarisation states. Here I introduce a novel concept of vectorial wavefront holography by exploiting the wavefront shaping of a structured vector beam. I will show that a phase hologram can be used to tailor the …
Designing reconfigurable metasurfaces that can dynamically control scattered electromagnetic waves and work in the near-infrared (NIR) and optical regimes remains a challenging task, which is hindered by the static material property and fixed structures. Phase change materials (PCMs) can provide high contrast optical refractive indexes at high frequencies between amorphous and crystal states, therefore are promising as feasible materials for reconfigurable metasurfaces. Here, we propose a hybrid metasurface that can arbitrarily modulate the complex amplitude of incident light with uniform ampl…
All-dielectric optical metasurfaces can locally control the amplitude and phase of light at the nanoscale, enabling arbitrary wavefront shaping. However, lack of post-fabrication tunability has limited the true potential of metasurfaces for many applications. Here, we utilize a thin liquid crystal (LC) layer as a tunable medium surrounding the metasurface to achieve a phase-only spatial light modulator (SLM) with high reflection in the visible frequency, exhibiting an active and continuous resonance tuning with associated 2pi phase control and uncoupled amplitude. Dynamic wavefront shaping is …
Optical prisms are made of glass and map temporal frequencies into spatial frequencies by decomposing incident white light into its constituent colors and refract them into different directions. Conventional prisms suffer from their volumetric bulky and heavy structure and their material parameters are dictated by the Lorentz reciprocity theorem. Considering various applications of prisms in wave engineering and their growing applications in the invisible spectrum and antenna applications, there is a demand for compact apparatuses that are capable of providing prism functionality in a reconfig…
Spatial light modulators (SLMs) are central to numerous applications ranging from high-speed displays to adaptive optics, structured illumination microscopy, and holography. After decades of advances, SLM arrays based on liquid crystals can now reach large pixel counts exceeding 10^6 with phase-only modulation with a pixel pitch of less than 10 μm and reflectance around 75%. However, the rather slow modulation speed in such SLMs (below hundreds of Hz) presents limitations for many applications. Here we propose an SLM architecture that can achieve high pixel count with high-resolution phase-onl…
