This work, for the first time, considers confidential data collection in the context of unmanned aerial vehicle (UAV) wireless networks, where the scheduled ground sensor node (SN) intends to transmit confidential information to the UAV without being intercepted by other unscheduled ground SNs. Specifically, a full-duplex (FD) UAV collects data from each scheduled SN on the ground and generates artificial noise (AN) to prevent the scheduled SN's confidential information from being wiretapped by other unscheduled SNs. We first derive the reliability outage probability (ROP) and secrecy outage probability (SOP) of a considered fixed-rate transmission, based on which we formulate an optimization problem that maximizes the minimum average secrecy rate (ASR) subject to some specific constraints. We then transform the formulated optimization problem into a convex problem with the aid of first-order restrictive approximation technique and penalty method. The resultant problem is a generalized nonlinear convex programming (GNCP) and solving it directly still leads to a high complexity, which motivates us to further approximate this problem as a second-order cone program (SOCP) in order to reduce the computational complexity. Finally, we develop an iteration procedure based on penalty successive convex approximation (P-SCA) algorithm to pursue the solution to the formulated optimization problem. Our examination shows that the developed joint design achieves a significant performance gain compared to a benchmark scheme.
Unmanned aerial vehicles (UAVs) have found widespread commercial, civilian, and military applications. Wireless communication has always been one of the core technologies for UAV. However, the communication capacity is becoming a bottleneck for UAV to support more challenging application scenarios. The heavily-occupied sub-6 GHz frequency band is not sufficient to meet the ultra high-data-traffic requirements. The utilization of the millimeter-wave (mmWave) frequency bands is a promising direction for UAV communications, where large antenna arrays can be packed in a small area on the UAV to pe…
The next generation of wireless communication systems will integrate terrestrial and non-terrestrial networks targeting to cover the undercovered regions, especially connecting the marine activities. Unmanned aerial vehicles (UAVs) based connectivity solutions offer significant advances to support the conventional terrestrial networks. However, the use of UAVs for maritime communication is still an unexplored area of research. Therefore, this paper highlights different aspects of UAV-based maritime communication, including the basic architecture, various channel characteristics, and use cases.…
Hybrid Reconfigurable Intelligent Surfaces (HRISs), which are capable of simultaneous programmable reflections and sensing, are expected to play a significant role in future wireless networks, enabling various Integrated Sensing and Communication (ISAC) applications. In this paper, we focus on HRIS-enabled Unmanned Aerial Vehicle (UAV) networks and design the HRIS parameters (phase profile, reception combining, and the power splitting between the two functionalities) for jointly estimating the individual UAV-HRIS and HRIS-base-station channels as well as the Angle of Arrival (AoA) of the Line-…
This letter considers the unmanned aerial vehicle (UAV)-enabled relay system to deliver command information under ultra-reliable and low-latency communication (URLLC) requirements. We aim to jointly optimize the blocklength allocation and the UAV's location to minimize the decoding error probability subject to the latency requirement. The achievable data rate under finite blocklength regime is adopted. A novel perturbation-based iterative algorithm is proposed to solve this problem. Simulation results show that the proposed algorithm can achieve the same performance as the exhaustive search me…
Unmanned aerial vehicles (UAVs) have been actively studied as moving cloudlets to provide application offloading opportunities and to enhance the security level of user equipments (UEs). In this correspondence, we propose a hybrid UAV-aided secure offloading system in which a UAV serves as a helper by switching the mode between jamming and relaying to maximize the secrecy sum-rate of UEs. This work aims to optimize (i) the trajectory of the helper UAV, (ii) the mode selection strategy and (iii) the UEs' offloading decisions under the constraints of offloading accomplishment and the UAV's opera…
Reconfigurable intelligent surface (RIS) offers tremendous spectrum and energy efficiency in wireless networks by adjusting the amplitudes and/or phases of passive reflecting elements to optimize signal reflection. With the agility and mobility of unmanned aerial vehicles (UAVs), RIS can be mounted on UAVs to enable three-dimensional signal reflection. Compared to the conventional terrestrial RIS (TRIS), the aerial RIS (ARIS) enjoys higher deployment flexibility, reliable air-to-ground links, and panoramic full-angle reflection. However, due to UAV's limited payload and battery capacity, it is…
This letter considers an unmanned aerial vehicle (UAV)-enabled relay communication system for delivering latency-critical messages with ultra-high reliability, where the relay is operating under amplifier-and-forward (AF) mode. We aim to jointly optimize the UAV location and power to minimize decoding error probability while guaranteeing the latency constraints. Both the free-space channel model and three-dimensional (3-D) channel model are considered. For the first model, we propose a low-complexity iterative algorithm to solve the problem, while globally optimal solution is derived for the c…
Owing to the controlling flexibility and cost-effectiveness, fixed-wing unmanned aerial vehicles (UAVs) are expected to serve as flying base stations (BSs) in the air-ground integrated network. By exploiting the mobility of UAVs, controllable coverage can be provided for mobile group users (MGUs) under challenging scenarios or even somewhere without communication infrastructure. However, in such dual mobility scenario where the UAV and MGUs are all moving, both the non-hovering feature of the fixed-wing UAV and the movement of MGUs will exacerbate the dynamic changes of user scheduling, which …
In order to overcome the inherent latency in multi-user unmanned aerial vehicle (UAV) networks with orthogonal multiple access (OMA). In this paper, we investigate the UAV enabled uplink non-orthogonal multiple access (NOMA) network, where a UAV is deployed to collect the messages transmitted by ground users. In order to maximize the sum rate of all users and to meet the quality of service (QoS) requirement, we formulate an optimization problem, in which the UAV deployment position and the power control are jointly optimized. This problem is non-convex and some variables are binary, and thus i…
Unmanned aerial vehicle (UAV)-enabled wireless power transfer (WPT) systems offer significant advantages in coverage and deployment flexibility, but suffer from endurance limitations due to the limited onboard energy. This paper proposes to improve the energy efficiency of UAV-enabled WPT systems with multiple ground sensors by utilizing reconfigurable intelligent surface (RIS). Specifically, the total energy consumption of the UAV is minimized, while meeting the energy requirement of each sensor. Firstly, we consider a fly-hover-broadcast (FHB) protocol, in which the UAV radiates radio freque…
In this paper, we investigate the average achievable data rate (AADR) of the control information delivery from the ground control station (GCS) to unmanned-aerial-vehicle (UAV) under a 3-D channel, which requires ultra-reliable and low-latency communications (URLLC) to avoid collision. The value of AADR can give insights on the packet size design. Achievable data rate under short channel blocklength is adopted to characterize the system performance. The UAV is assumed to be uniformly distributed within a restricted space. We first adopt the Gaussian-Chebyshev quadrature (GCQ) to approximate th…
This work considers unmanned aerial vehicle (UAV) networks for collecting data covertly from ground users. The full-duplex UAV intends to gather critical information from a scheduled user (SU) through wireless communication and generate artificial noise (AN) with random transmit power in order to ensure a negligible probability of the SU's transmission being detected by the unscheduled users (USUs). To enhance the system performance, we jointly design the UAV's trajectory and its maximum AN transmit power together with the user scheduling strategy subject to practical constraints, e.g., a cove…
In Unmanned Aerial Vehicle (UAV)-enabled mobile edge computing (MEC) systems, UAVs can carry edge servers to help ground user equipment (UEs) offloading their computing tasks to the UAVs for execution. This paper aims to minimize the total time required for the UAVs to complete the offloaded tasks, while optimizing the three-dimensional (3D) deployment of UAVs, including their flying height and horizontal positions. Although the formulated optimization is a mixed integer nonlinear programmming, we convert it to a convex problem and develop a successive convex approximation (SCA) based algorith…
An unmanned aerial vehicle (UAV)-aided secure communication system is conceived and investigated, where the UAV transmits legitimate information to a ground user in the presence of an eavesdropper (Eve). To guarantee the security, the UAV employs a power splitting approach, where its transmit power can be divided into two parts for transmitting confidential messages and artificial noise (AN), respectively. We aim to maximize the average secrecy rate by jointly optimizing the UAV's trajectory, the transmit power levels and the corresponding power splitting ratios allocated to different time slo…
Thanks to their quick placement and high flexibility, unmanned aerial vehicles (UAVs) can be very useful in the current and future wireless communication systems. With a growing number of smart devices and infrastructure-free communication networks, it is necessary to legitimately monitor these networks to prevent crimes. In this paper, a novel framework is proposed to exploit the flexibility of the UAV for legitimate monitoring via joint trajectory design and energy management. The system includes a suspicious transmission link with a terrestrial transmitter and a terrestrial receiver, and a …
RHOSI: Efficient Anti-Jamming Resource Allocation with Holographic Surfaces in UAV-enabled ISAC
Pontifical Catholic University of Rio de Janeiro（里约热内卢天主教大学）；University of British Columbia（不列颠哥伦比亚大学）；JuliaSpace LLC（JuliaSpace有限责任公司）；University of York（约克大学）
Unmanned aerial vehicle (UAV)-enabled wireless power transfer (WPT) has recently emerged as a promising technique to provide sustainable energy supply for widely distributed low-power ground devices (GDs) in large-scale wireless networks. Compared with the energy transmitters (ETs) in conventional WPT systems which are deployed at fixed locations, UAV-mounted aerial ETs can fly flexibly in the three-dimensional (3D) space to charge nearby GDs more efficiently. This paper provides a tutorial overview on UAV-enabled WPT and its appealing applications, in particular focusing on how to exploit UAV…
This paper develops an unmanned aerial vehicle (UAV) deployment scheme in the context of the directional modulation-based secure precise wireless transmissions (SPWTs), where the optimal UAV position for the SPWT is derived to maximum the secrecy rate (SR) without injecting any artificial noise (AN) signaling. To be specific, the proposed scheme reveals that the optimal position of UAV for maximizing the SR performance has to be placed at the null space of Eves channel, which impels the received energy of the confidential message at the unintended receiver deteriorating to zero whilst benefits…
5G enabled maritime unmanned aerial vehicle (UAV) communication is one of the important applications of 5G wireless network which requires minimum latency and higher reliability to support mission-critical applications. Therefore, lossless reliable communication with a high data rate is the key requirement in modern wireless communication systems. These all factors highly depend upon channel conditions. In this work, a channel model is proposed for air-to-surface link exploiting millimeter wave (mmWave) for 5G enabled maritime unmanned aerial vehicle (UAV) communication. Firstly, we will prese…
Unmanned aerial vehicles (UAVs) can be used as flying base stations (BSs) to offload Macro-BSs in hotspots. However, due to the limited battery on-board, UAVs can typically stay in operation for less than 1.5 hours. Afterward, the UAV has to fly back to a dedicated charging station that recharges/replaces the UAV's battery. In this paper, we study the performance of a UAV-enabled cellular network while capturing the influence of the spatial distribution of the charging stations. In particular, we use tools from stochastic geometry to derive the coverage probability of a UAV-enabled cellular ne…
Unmanned aerial vehicle (UAV) communications have attracted significant attention from both academia and industry. To facilitate the large-scale usage of UAVs for various applications in practice, we provide a comprehensive survey on the prototype and experiment for UAV communications. To this end, we first provide an overview on the general architecture of the prototype and experiment for UAV communications, and then present experimental verification for air-to-ground channel models and UAV energy consumption models. Next, we discuss measurement experiments on two promising paradigms of UAV c…
Unmanned aerial vehicle (UAV) swarm enabled edge computing is envisioned to be promising in the sixth generation wireless communication networks due to their wide application sensories and flexible deployment. However, most of the existing works focus on edge computing enabled by a single or a small scale UAVs, which are very different from UAV swarm-enabled edge computing. In order to facilitate the practical applications of UAV swarm-enabled edge computing, the state of the art research is presented in this article. The potential applications, architectures and implementation considerations …
We study an urban wireless network in which cache-enabled UAV-Access points (UAV-APs) and UAV-Base stations (UAV-BSs) are deployed to provide higher throughput and ad-hoc coverage to users on the ground. The cache-enabled UAV-APs route the user data to the core network via either terrestrial base stations (TBSs) or backhaul-enabled UAV-BSs through an xHaul link. First, we derive the association probabilities in the access and xHaul links. Interestingly, we show that to maximize the line-of-sight (LoS) unmanned aerial vehicle (UAV) association, densifying the UAV deployment may not be beneficia…
Unmanned aerial vehicles (UAVs) are capable of serving as flying base stations (BSs) for supporting data collection, artificial intelligence (AI) model training, and wireless communications. However, due to the privacy concerns of devices and limited computation or communication resource of UAVs, it is impractical to send raw data of devices to UAV servers for model training. Moreover, due to the dynamic channel condition and heterogeneous computing capacity of devices in UAV-enabled networks, the reliability and efficiency of data sharing require to be further improved. In this paper, we deve…
With the assistance of device-to-device (D2D) communications, unmanned aerial vehicle (UAV) networks are anticipated to support widespread applications in the fifth generation (5G) and beyond wireless systems, by providing seamless coverage, flexible deployment, and high channel rate. However, the networks face significant security threats from malicious eavesdroppers due to the inherent broadcast and openness nature of wireless channels. To ensure secure communications of such networks, physical layer security is a promising technique, which utilizes the randomness and noise of wireless chann…
Unlike aerial base station enabled by a single unmanned aerial vehicle (UAV), aerial coordinated multiple points (CoMP) can be enabled by a UAV swarm. In this case, the management of multiple UAVs is important. This paper considers the power allocation strategy for a UAV swarm-enabled aerial network to enhance the physical layer security of the downlink transmission, where an eavesdropper moves following the trajectory of the swarm for better eavesdropping. Unlike existing works, we use only the large-scale channel state information (CSI) and maximize the secrecy throughput in a whole-trajecto…
Next-generation networks need to meet ubiquitous and high data-rate demand. Therefore, this paper considers the throughput and trajectory optimization of terahertz (THz)-enabled unmanned aerial vehicles (UAVs) in the sixth-generation (6G) communication networks. In the considered scenario, multiple UAVs must provide on-demand terabits per second (TB/s) services to an urban area along with existing terrestrial networks. However, THz-empowered UAVs pose some new constraints, e.g., dynamic THz-channel conditions for ground users (GUs) association and UAV trajectory optimization to fulfill GU's th…
In this letter, we investigate a UAV-enabled communication system, where a UAV is deployed to communicate with the ground node (GN) in the presence of multiple jammers. We aim to maximize the energy efficiency (EE) of the UAV by optimizing its trajectory, subject to the UAV's mobility constraints. However, the formulated problem is difficult to solve due to the non-convex and fractional form of the objective function. Thus, we propose an iterative algorithm based on successive convex approximation (SCA) technique and Dinkelbach's algorithm to solve it. Numerical results show that the proposed …
In the finite blocklength scenario, which is suitable for practical applications, a method of maximizing the average effective secrecy rate (AESR) is proposed for a UAV-enabled secure communication by optimizing the UAV's trajectory and transmit power subject to the UAV's mobility constraints and transmit power constraints. To address the formulated non-convex optimization problem, it is first decomposed into two non-convex subproblems. Then the two subproblems are converted respectively into two convex subproblems via the first-order approximation. Finally, an alternating iteration algorithm …
This paper investigates the achievable rate maximization problem of a downlink unmanned aerial vehicle (UAV)-enabled communication system aided by an intelligent omni-surface (IOS). Different from the state-of-the-art reconfigurable intelligent surface (RIS) that only reflects incident signals, the IOS can simultaneously reflect and transmit the signals, thereby providing full-dimensional rate enhancement. To tackle such a problem, we formulate it by jointly optimizing the IOS's phase shift and the UAV trajectory. Although it is difficult to solve it optimally due to its non-convexity, we prop…
This paper considers an unmanned aerial vehicle enabled-up link non-orthogonal multiple-access system, where multiple mobile users on the ground send independent messages to a unmanned aerial vehicle in the sky via non-orthogonal multiple-access transmission. Our objective is to design the unmanned aerial vehicle dynamic maneuver for maximizing the sum-rate throughput of all mobile ground users over a finite time horizon.
In this paper, we consider a UAV-enabled MEC platform that serves multiple mobile ground users with random movements and task arrivals. We aim to minimize the average weighted energy consumption of all users subject to the average UAV energy consumption and data queue stability constraints. To control the system operation in sequential time slots, we formulate the problem as a multi-stage stochastic optimization, and propose an online algorithm that optimizes the resource allocation and the UAV trajectory in each stage. We adopt Lyapunov optimization to convert the multi-stage stochastic probl…
In this paper, we study an unmanned aerial vehicle(UAV)-enabled wireless sensor network, where a UAV is dispatched to collect the sensed data from distributed sensor nodes (SNs) for estimating an unknown parameter. It is revealed that in order to minimize the mean square error (MSE) for the estimation, the UAV should collect the data from as many SNs as possible, based on which an optimization problem is formulated to design the UAV's trajectory subject to its practical mobility constraints. Although the problem is non-convex and NP-hard, we show that the optimal UAV trajectory consists of con…
