An important goal of spintronics is to covert a charge current into a spin current with a controlled spin polarization that can exert torques on an adjacent magnetic layer. Here we demonstrate such torques in a two ferromagnet system. A CoNi multilayer is used as a spin current source in a sample with structure CoNi/Au/CoFeB. Spin torque ferromagnetic resonance is used to measure the torque on the CoFeB layer. The response as a function of the applied field angle and current is consistent with the symmetry expected for a torques produced by the planar Hall effect originating in CoNi. We find the strength of this effect to be comparable to that of the spin Hall effect in platinum, indicating that the planar Hall effect holds potential as a spin current source with a controllable polarization direction.
Dominant spin Hall torque and negligible orbital Hall torque in α-W/ferromagnet heterostructures with artifacts-free angular momentum detectors
State Key Laboratory of Semiconductor Physics and Chip Technologies, Institute of Semiconductors, Chinese Academy of Sciences（中国科学院半导体研究所半导体物理与芯片技术国家重点实验室）；Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences（中国科学院大学材料科学与光电工程技术研究中心）；College of Physics and Information Technology, Shaanxi Normal University（陕西师范大学物理学与信息技术学院）
We have quantitatively studied the spin-orbit torque purely generated by the spin Hall effect in a wide range of temperatures by intensionally eliminating the Rashba spin-orbit torque using Pt/Co/Pt trilayers with asymmetric thicknesses of the top and bottom Pt layers. The vanishingly small contribution from the Rashba effect has been confirmed through the vector measurements of the current-induced effective fields. In order to precisely determine the value of the spin Hall torque, the complete cancelation of the spin Hall torque has been verified by fabricating symmetric Pt/Co/Pt structure on…
Solid understanding of current induced torques is key to the development of current and voltage controlled magnetization dynamics in ultrathin magnetic heterostructures. A versatile technique is needed to evaluate such torques in various systems. Here we examine the adiabatic (low frequency) harmonic Hall voltage measurement that has been recently developed to study current induced effective field that originate from the spin orbit effects. We analytically derive a form that can be used to evaluate the harmonic Hall voltages and extract relevant parameters in two representative systems, i.e. o…
Current-driven magnetization dynamics of single ferromagnets in heavy metal/ferromagnet bilayers has been recently realized. In this work, spin torque induced by so-called Rashba spin-orbit coupling and spin Hall effect are considered within a diffusive model. The dependence of the resulting torque as a function of the thicknesses of the ferromagnet and heavy metal is analyzed. We show that (i) both torques are on the form ${\bf T}=T_{||}{\bf m}\times{\bf y}+T_\bot{\bf m}\times({\bf y}\times{\bf m})$, (ii) the ratio $T_{||}/T_\bot$ strongly depends on the thickness of the layers and (iii) the …
Efficient generation of spin-orbit torques (SOTs) is central for the exciting field of spin-orbitronics. Platinum, the archetypal spin Hall material, has the potential to be an outstanding provider for spin-orbit torques due to its giant spin Hall conductivity, low resistivity, high stabilities, and the ability to be compatible with CMOS circuits. However, pure clean-limit Pt with low resistivity still provides a low damping-like spin-orbit torque efficiency, which limits its practical applications. The efficiency of spin-orbit torque in Pt-based magnetic heterostructures can be improved consi…
Monolayer transition metal dichalcogenides are promising materials for spintronics due to their robust spin-valley locked valence states, enabling efficient charge-to-spin conversion via valley Hall effect with non-equilibrium spins possessing long spin diffusion lengths of hundreds of nanometers. In this work, we show that the injection of a pure valley current, induced by valley Hall effect in a WSe2 monolayer, imparts a spin torque on the magnetization of an overlaid Fe or CoFe in a tunneling structure. The torque efficiency is found to be comparable to that in conventional perpendicular ma…
We report that spin current transport across Pt-ferromagnet (FM) interfaces is strongly dependent on the type and the thickness of the FM layer and on post-deposition processing protocols. By employing both harmonic voltage measurements and spin-torque ferromagnetic resonance measurements, we find that the efficiency of the Pt spin Hall effect in exerting a damping-like spin torque on the FM ranges from < 0.05 to > 0.10 under different interfacial conditions. We also show that the temperature dependence of the spin torque efficiencies for both the damping-like torque and field-like torque is d…
Solid understanding of current induced torques is key to the development of current and voltage controlled magnetization dynamics in ultrathin magnetic heterostructures. To evaluate the size and direction of such torques, or effective fields, a number of methods have been employed. Here we examine the adiabatic (low frequency) harmonic Hall voltage measurement that has been used to study the effective field. We derive an analytical formula for the harmonic Hall voltages to evaluate the effective field for both out of plane and in-plane magnetized systems. The formula agrees with numerical calc…
We present a simple technique using a cavity-based resonance spectrometer to quantify the anti-damping torque due to the spin Hall effect. Modification of ferromagnetic resonance is observed as a function of small DC current in sub-mm-wide strips of bilayers, consisting of magnetically soft FeGaB and strong spin-Hall metal Ta. From the detected current-induced linewidth change, we obtain an effective spin Hall angle of 0.08-0.09 independent of the magnetic layer thickness. Our results demonstrate that a sensitive resonance spectrometer can be a general tool to investigate spin Hall effects in …
We report a giant spin Hall effect (SHE) in β-W thin films. Using spin torque induced ferromagnetic resonance with a β-W/CoFeB bilayer microstrip we determine the spin Hall angle to be |θ|=0.30\pm0.02, large enough for an in-plane current to efficiently reverse the orientation of an in-plane magnetized CoFeB free layer of a nanoscale magnetic tunnel junction adjacent to a thin β-W layer. From switching data obtained with such 3-terminal devices we independently determine |θ|=0.33\pm0.06. We also report variation of the spin Hall switching efficiency with W layers of different resistivities and…
We studied the effect of inserting 0.5 nm-thick spacer layers (Ti, V, Cr, Mo, W) at the Pt/Co interface on the spin-orbit torques, Hall effect, magnetoresistance, saturation magnetization, and magnetic anisotropy. We find that the damping-like spin-orbit torque decreases substantially for all samples with a spacer layer compared to the reference Pt/Co bilayer, consistently with the opposite sign of the atomic spin-orbit coupling constant of the spacer elements relative to Pt. The reduction of the damping-like torque is monotonic with atomic number for the isoelectronic 3d, 4d, and 5d elements,…
Spin-orbit coupling in ferromagnets gives rise to the anomalous Hall effect and the anisotropic magnetoresistance, both of which can be used to create spin-transfer torques in a similar manner as the spin Hall effect. In this paper we show how these effects can be used to reliably switch perpendicularly magnetized layers and to move domain walls. A drift-diffusion treatment of the anomalous Hall effect and the anisotropic magnetoresistance describes the spin currents that flow in directions perpendicular to the electric field. In systems with two ferromagnetic layers separated by a spacer laye…
Harmonic Hall voltage measurements are a wide-spread quantitative technique for the measurement of spin-orbit induced effective fields in heavy-metal / ferromagnet heterostructures. In the vicinity of the voltage pickup lines in the Hall bar, the current is inhomogeneous, which leads to a hitherto not quantified reduction of the effective fields and derived quantities, such as the spin Hall angle or the spin Hall conductivity. Here we present a thorough analysis of the influence of the aspect ratio of the voltage pickup lines to current channel widths on the apparent spin Hall angle. Experimen…
Spin torque oscillators placed onto a nonmagnetic heavy metal show synchronized auto-oscillations due to the coupling originating from spin Hall magnetoresistance effect. Here, we study a system having two spin torque oscillators under the effect of the spin Hall torque, and show that switching the external current direction enables us to control the phase difference of the synchronization between in-phase and antiphase.
Spin-orbit torques in bilayers of ferromagnetic and nonmagnetic materials hold promise for energy efficient switching of magnetization in nonvolatile magnetic memories. Previously studied spin Hall and Rashba torques originate from spin-orbit interactions within the nonmagnetic material and at the bilayer interface, respectively. Here we report a spin-orbit torque that arises from planar Hall current in the ferromagnetic material of the bilayer and acts as either positive or negative magnetic damping. This planar Hall torque exhibits unusual biaxial symmetry in the plane defined by the applied…
We develop a theoretical formula of spin Hall torque in the presence of two ferromagnets. While the direction of the conventional spin Hall torque always points to the in-plane direction, the present system enables to manipulate the torque direction acting on one magnetization by changing the direction of another magnetization. Based on the diffusion equation of the spin accumulation and the Landauer formula, we derive analytical formula of the spin Hall torque. The present model provides a solution to switch a perpendicular ferromagnet deterministically at zero field using the spin Hall effec…
We propose an experimental scheme to determine the spin-transfer torque efficiency excited by the spin-orbit interaction in ferromagnetic bilayers from the measurement of the longitudinal magnetoresistace. Solving a diffusive spin-transport theory with appropriate boundary conditions gives an analytical formula of the longitudinal charge current density. The longitudinal charge current has a term that is proportional to the square of the spin-transfer torque efficiency and that also depends on the ratio of the film thickness to the spin diffusion length of the ferromagnet. Extracting this cont…
We present a detailed analysis of harmonic longitudinal and Hall voltage measurements for in-plane magnetized Pt/Co/Ta and Ta/Co/Pt trilayers in reference to Pt/Co and Ta/Co bilayers. Enhancement of spin-orbit torques (SOTs) and unidirectional spin Hall magnetoresistance (USMR) is achieved by introducing the second heavy metal (HM) with the opposite sign of the spin Hall angle. The extracted SOT efficiencies are larger for the trilayers as compared to the bilayers, confirming the enhanced values reported for the trilayers with perpendicularly magnetized Co. The maximum effective spin Hall angl…
Spin Hall effect, an electric generation of spin current, allows for efficient control of magnetization. Recent theory revealed that orbital Hall effect creates orbital current, which can be much larger than spin Hall-induced spin current. However, orbital current cannot directly exert a torque on a ferromagnet, requiring a conversion process from orbital current to spin current. Here, we report two effective methods of the conversion through spin-orbit coupling engineering, which allows us to unambiguously demonstrate orbital-current-induced spin torque, or orbital Hall torque. We find that o…
Two promising strategies for achieving efficient control of magnetization in future magnetic memory and non-volatile spin logic devices are spin transfer torque from spin polarized currents and voltage-controlled magnetic anisotropy (VCMA). Spin transfer torque is in widespread development as the write mechanism for next-generation magnetic memory, while VCMA offers the potential of even better energy performance due to smaller Ohmic losses. Here we introduce a 3-terminal magnetic tunnel junction (MTJ) device that combines both of these mechanisms to achieve new functionality: gate-voltage-mod…
The motion of magnetic domain walls in ultrathin magnetic heterostructures driven by current via the spin Hall torque is described. We show results from perpendicularly magnetized CoFeB|MgO heterostructures with various heavy metal underlayers. The domain wall moves along or against the current flow depending on the underlayer material. The direction to which the domain wall moves is associated with the chirality of the domain wall spiral formed in these heterostructures. The one-dimensional model is used to describe the experimental results and extract parameters such as the Dzyaloshinskii-Mo…
We report a giant spin Hall effect (SHE) in β-Ta that generates spin currents intense enough to induce efficient spin-transfer-torque switching of ferromagnets, thereby providing a new approach for controlling magnetic devices that can be superior to existing technologies. We quantify this SHE by three independent methods and demonstrate spin-torque (ST) switching of both out-of-plane and in-plane magnetized layers. We implement a three-terminal device that utilizes current passing through a low impedance Ta-ferromagnet bilayer to effect switching of a nanomagnet, with a higher-impedance magne…
We report a comprehensive study of the maximization of the spin Hall ratio (θSH) in Pt thin films by the insertion of sub-monolayer layers of Ti to decrease carrier lifetime while minimizing the concurrent reduction in the spin Hall conductivity. We establish that the intrinsic spin Hall conductivity of Pt, while robust against the strain and the moderate interruption of crystal order caused by these insertions, begins to decrease rapidly at high resistivity level because of the shortening carrier lifetime. The unavoidable trade-off between the intrinsic spin Hall conductivity and carrier life…
The thickness dependence of spin-orbit torque and magnetoresistance in ferromagnet/heavy-metal bilayers is studied using the first-principles non-equilibrium Green's function formalism combined with the Anderson disorder model. A systematic expansion in orthogonal vector spherical harmonics is used for the angular dependence of the torque. The damping-like torque in Co/Pt and Co/Au bilayers can be described as a sum of the spin-Hall contribution, which increases with thickness in agreement with the spin-diffusion model, and a comparable interfacial contribution. The magnetoconductance in the p…
Time-resolved scanning Kerr microscopy (TRSKM) was used to study precessional magnetization dynamics induced by a radio frequency (RF) current within a Al$_2$O$_3$/Py(5 nm)/Pt(6 nm)/Au(150 nm) spin Hall nano-oscillator structure. The Au layer was formed into two needle-shaped electrical contacts that concentrated the current in the centre of a Py/Pt mesa of 4 $μ$m diameter. Due to the spin Hall effect, current within the Pt layer drives a spin current into the Py layer, exerting a spin transfer torque (STT). By injecting RF current, and exploiting the phase-sensitivity of TRSKM and the symmetr…
The spin Hall effect originating from 5d heavy transition metal thin films such as Pt, Ta, and W is able to generate efficient spin-orbit torques that can switch adjacent magnetic layers. This mechanism can serve as an alternative to conventional spin-transfer torque for controlling next-generation magnetic memories. Among all 5d transition metals, W in its resistive amorphous phase typically shows the largest spin-orbit torque efficiency ~ 0.20-0.50. In contrast, its conductive and crystalline $α$ phase possesses a significantly smaller efficiency ~ 0.03 and no spin-orbit torque switching has…
Precise estimation of spin Hall angle as well as successful maximization of spin-orbit torque (SOT) form a basis of electronic control of magnetic properties with spintronic functionality. Until now, current-nonlinear Hall effect, or second harmonic Hall voltage has been utilized as one of the methods for estimating spin Hall angle, which is attributed to the magnetization oscillation by SOT. Here, we argue the second harmonic Hall voltage in magnetic/nonmagnetic topological insulator (TI) heterostructures, Cr$_x$(Bi$_{1-y}$Sb$_y$)$_{2-x}$Te$_3$/(Bi$_{1-y}$Sb$_y$)$_2$Te$_3$. From the angular, …
The spin-orbit interaction in heavy metal/ferromagnet/oxide structures has been extensively investigated because it can be employed in manipulation of the magnetization direction by in-plane current. This implies the existence of an inverse effect, in which the conductivity in such structures should depend on the magnetization orientation. In this work, we report a systematic study of the magnetoresistance (MR) of the W/CoFeB/MgO structures and its correlation to the current-induced torque to the magnetization. We observe that the MR is independent of the angle between magnetization and curren…
Spin accumulation and spin transfer torques induced by Spin Hall Effect in bi-layer structures comprising ferromagnetic and paramagnetic materials are theoretically investigated. The charge and spin diffusion equations taking into account spin-flip and spin Hall effect are formulated and solved analytically and numerically for in structures with simplified and complex geometry, respectively. It is demonstrated that spin torques could be efficiently produced by means of Spin Hall effect which may be further enhanced by modifying structure geometry.
Polar and quadratic magneto-optical Kerr effects in nonmagnetic/ferromagnet bilayers for spin-orbit torque measurements
The University of Tokyo（东京大学）；Research Institute of Electrical Communication (RIEC), Tohoku University（东北大学电气通信研究所）；Mie University（三重大学）；Trans-scale quantum science institute (TSQS), The University of Tokyo（东京大学跨尺度量子科学研究所）
Harmonic analysis is a powerful tool to characterize and quantify current-induced torques acting on magnetic materials, but so far it remains an open question in studying antiferromagnets. Here we formulate a general theory of harmonic Hall responses of collinear antiferromagnets driven by current-induced torques including both field-like and damping-like components. By scanning a magnetic field of variable strength in three orthogonal planes, we are able to distinguish the contributions from field-like torque, damping-like torque, and concomitant thermal effects by analyzing the second harmon…
This paper micromagnetically studies the magnetization dynamics driven by the spin-Hall effect in a Platinum/Permalloy bi-layer. For a certain field and current range, the excitation of a uniform mode, characterized by a power with a spatial distribution in the whole ferromagnetic cross section, is observed. We suggest to use the ferromagnet of the bi-layer as basis for the realization of an array of spin-torque oscillators (STOs): the Permalloy ferromagnet will act as shared free layer, whereas the spacers and the polarizers are built on top of it. Following this strategy, the frequency of th…
We report that by measuring current-induced hysteresis loop shift versus in-plane bias magnetic field, the spin Hall effect (SHE) contribution of the current-induced effective field per current density, $χ_{SHE}$, can be estimated for Pt and Ta-based magnetic heterostructures with perpendicular magnetic anisotropy (PMA). We apply this technique to a Pt-based sample with its ferromagnetic (FM) layer being wedged-deposited and discover an extra effective field contribution, $χ_{Wedged}$, due to the asymmetric nature of the deposited FM layer. We confirm the correlation between $χ_{Wedged}$ and t…
We have proposed a method to synchronize multiple spin-transfer torque oscillators based on spin pumping, inverse spin Hall, and spin Hall effects. The proposed oscillator system consists of a series of nano-magnets in junction with a normal metal with high spin-orbit coupling, and an accumulative feedback loop. We conduct simulations to demonstrate the effect of modulated charge currents in the normal metal due to spin pumping from each nano-magnet. We show that the interplay between the spin Hall effect and inverse spin Hall effect results in synchronization of the nano-magnets.
It has been shown that the spin Hall effect from heavy transition metals can generate sufficient spin-orbit torque and further produce current-induced magnetization switching in the adjacent ferromagnetic layer. However, if the ferromagnetic layer has in-plane magnetic anisotropy, probing such switching phenomenon typically relies on tunneling magnetoresistance measurement of nano-sized magnetic tunnel junctions, differential planar Hall voltage measurement, or Kerr imaging approaches. We show that in magnetic heterostructures with spin Hall metals, there exist current-induced in-plane spin Ha…
We show that direct current in a tantalum microstrip can induce steady-state magnetic oscillations in an adjacent nanomagnet through spin torque from the spin Hall effect (SHE). The oscillations are detected electrically via a magnetic tunnel junction (MTJ) contacting the nanomagnet. The oscillation frequency can be controlled using the MTJ bias to tune the magnetic anisotropy. In this 3-terminal device the SHE torque and the MTJ bias therefore provide independent controls of the oscillation amplitude and frequency, enabling new approaches for developing tunable spin torque nano-oscillators.
We report very efficient spin current generation by the spin Hall effect in the alloy Au0.25Pt0.75, which, as determined by two different direct spin-orbit torque measurements, exhibits a giant internal spin Hall ratio of > 0.58 (anti-damping spin-orbit torque efficiency of ~ 0.35 in bilayers with Co), a relatively low resistivity of ~ 83 uOhm cm, an exceptionally large spin Hall conductivity of > 7.0x10^5 ohm^-1 m^-1, and a spin diffusion length of 1.7 nm. This work establishes Au0.25Pt0.75 as a milestone spin current generator that provides greater energy efficiency than that yet obtained wi…
We have developed a drift-diffusion equation of spin transport in collinear bipartite metallic antiferromagnets. Starting from a model tight-binding Hamiltonian, we obtain the quantum kinetic equation within Keldysh formalism and expand it to the lowest order in spatial gradient using Wigner expansion method. In the diffusive limit, these equations track the spatio-temporal evolution of the spin accumulations and spin currents on each sublattice of the antiferromagnet. We use these equations to address the nature of spin transfer torque in (i) a spin-valve composed of a ferromagnet and an anti…
Current-induced spin torque and magnetization dynamics in the presence of spin Hall effect in magnetic textures is studied theoretically. The local deviation of the charge current gives rise to a current-induced spin torque of the form (1-β{\bf M})x[({\bf u}_0+α_H{\bf u}_0x\bf M})\cdot{\bm \nabla}]{\bf M}, where {\bf u}_0 is the direction of the injected current, α_H is the Hall angle and βis the non-adiabaticity parameter due to spin relaxation. Since α_H and βcan have a comparable order of magnitude, we show that this torque can significantly modify the current-induced dynamics of both trans…
We theoretically examine the spin-transfer torque in the presence of spin-orbit interaction (SOI) at impurities in a ferromagnetic metal on the basis of linear response theory. We obtained, in addition to the usual spin-transfer torque, a new contributioin $\sim {\bm j}_{\rm SH}^{\phantom{\dagger}} \cdot \nabla {\bm n}$ in the first order in SOI, where ${\bm j}_{\rm SH}^{\phantom{\dagger}}$ is the spin Hall current driven by an external electric field. This is a reaction to inverse spin Hall effect driven by spin motive force in a ferromagnet.
The angular dependence of spin-orbit torque in a disordered Co/Pt bilayer is calculated using a first-principles non-equilibrium Green's function formalism with an explicit supercell averaging over Anderson disorder. In addition to the usual dampinglike and fieldlike terms, the odd torque contains a sizeable planar Hall-like term $(\mathbf{m\cdot E})\mathbf{m}\times(\mathbf{z}\times\mathbf{m})$ whose contribution to current-induced damping is consistent with experimental observations. The dampinglike and planar Hall-like torquances depend weakly on disorder strength, while the fieldlike torqua…
The macroscopic signature for Weyl nodes so far has been the negative longitudinal magnetoresistance arising from the chiral anomaly. However, negative longitudinal magnetoresistance is not unique to chiral anomaly and can arise due to completely different mechanisms such as current jetting or in ferromagnetic systems due to the suppression of scattering with magnons. Therefore, a macroscopic effect that can be uniquely attributed to the presence of Weyl nodes is desirable. Here we show that the planar Hall effect could be a hallmark for Weyl nodes. We investigated the anisotropic magnetoresis…
Spin-Orbital Hall Nano-Oscillators using PtCr/NiFe
University of Gothenburg（哥德堡大学）；Tohoku University（东北大学）；Uppsala University（乌普萨拉大学）；Vietnam Academy of Science and Technology（越南科学技术院）；Chalmers University of Technology（查尔姆斯理工大学）
We investigate fast-pulse switching of in-plane-magnetized magnetic tunnel junctions (MTJs) within 3-terminal devices in which spin-transfer torque is applied to the MTJ by the giant spin Hall effect. We measure reliable switching, with write error rates down to $10^{-5}$, using current pulses as short as just 2 ns in duration. This represents the fastest reliable switching reported to date for any spin-torque-driven magnetic memory geometry, and corresponds to a characteristic time scale that is significantly shorter than predicted possible within a macrospin model for in-plane MTJs subject t…
We report an initial experimental survey of spin-Hall torques generated by the rare-earth metals Gd, Dy, Ho, and Lu, along with comparisons to first-principles calculations of their spin Hall conductivities. Using spin torque ferromagnetic resonance (ST-FMR) measurements and DC-biased ST-FMR, we estimate lower bounds for the spin-Hall torque ratio, $ξ_{SH}$, of $\approx$ 0.04 for Gd, $\approx$ 0.05 for Dy, $\approx$ 0.14 for Ho, and $\approx$ 0.014 for Lu. The variations among these elements are qualitatively consistent with results from first principles (density functional theory, DFT, in the…
We present the first measurements of Hall conductivity utilizing a new torque magnetometry method designed for insulators. A Corbino disk exhibits a magnetic dipole moment proportional to Hall conductivity when voltage is applied across a test material. This magnetic dipole moment can be measured through torque magnetometry. The symmetry of this contactless technique allows for the measurement of Hall conductivity in previously inaccessible materials. Finally, a low-temperature noise bound, the lack of systematic errors on dummy devices, and a measurement of the Hall conductivity of sputtered …
We show experimentally that the spin direction of the spin current generated by spin-orbit interactions within a ferromagnetic layer can be reoriented by turning the magnetization direction of this layer. We do this by measuring the field-like component of spin-orbit torque generated by an exchange-biased FeGd thin film and acting on a nearby CoFeB layer. The relative angle of the CoFeB and FeGd magnetic moments is varied by applying an external magnetic field. We find that the resulting torque is in good agreement with predictions that the spin current generated by the anomalous Hall effect f…
A spin-torque ferromagnetic resonance study is performed in epitaxial $\mathrm{Fe / Ir_{15}Mn_{85}}$ bilayers with different Fe thicknesses. We measure a negative spin-Hall angle of a few percent in the antiferromagnetic IrMn in contrast to previously reported positive values. A large spin-orbit field with Rashba symmetry opposing the Oersted field is also present. Magnitudes of measured spin-orbit torques depend on the crystallographic direction of current and are correlated with the exchange bias direction set during growth. We suggest that the uncompensated moments at the Fe / IrMn interfac…
Current induced spin-orbit torques have been studied in ferromagnetic nanowires made of 20 nm thick Co/Pd multilayers with perpendicular magnetic anisotropy. Using Hall voltage and lock-in measurements, it is found that upon injection of an electric current both in-plane (Slonczewski-like) and perpendicular (field-like) torques build up in the nanowire. The torque efficiencies are found to be as large as 1.17 kOe and 5 kOe at 108 A/cm2 for the in-plane and perpendicular components, respectively, which is surprisingly comparable to previous studies in ultrathin (~ 1 nm) magnetic bilayers. We sh…
