Quantum sensing techniques have been successful in pushing the sensitivity limits in numerous fields, and hold great promise for scanning probes that study nano-scale devices and novel materials. However, forming a nano-scale qubit that is simple and robust enough to be placed on a scanning tip, and sensitive enough to detect various physical observables, is still a great challenge. Here we demonstrate a conceptually new qubit implementation in a carbon nanotube that achieves these requirements. In contrast to the prevailing semiconducting qubits that use electronic states in double quantum dots, our qubit utilizes the natural electronic wavefunctions in a single quantum dot. Using an ultraclean nanotube we construct a qubit from two wavefunctions with significantly different magnetic moments and spatial charge distributions, making it sensitive to both magnetic and electric fields. We use an array of gates to directly image these wavefunctions and demonstrate their localized moments. Owing to their different spatial structure, these wavefunctions also show radically different transport properties, giving us a simple transport-based qubit readout mechanism. Due to its narrow coherence-limited transition, the qubit demonstrates significantly better electric field detection sensitivity than a single electron transistor. Moreover, with the same qubit we demonstrate simultaneous probing of magnetic fields with DC sensitivity comparable to that of NV centers. Our technique has minimal requirements for device complexity, which can be implemented using a number of straightforward fabrication methods. These features make this atomic-like qubit a powerful new tool that enables a variety of new nanoscale imaging experiments.
Long linear carbon chains encapsulated inside carbon nanotubes are a very close realization of carbyne, the truly one-dimensional allotrope of carbon. Here we study individual pairs of double-walled carbon nanotubes and encapsulated linear carbon chains by tip-enhanced Raman scattering. We observe that the radial breathing mode of the inner nanotube correlates with the frequency of the carbon chain's Raman mode, revealing that the nanotube chirality determines the vibronic and electronic properties of the encapsulated carbon chain. We provide the missing link that connects the properties of th…
We present ab initio calculations on the band structure and density of states of single wall semiconducting carbon nanotubes with high degrees (up to 25%) of B, Si and N substitution. The doping process consists of two phases: different carbon nanotubes (CNTs) for a constant doping rate and different doping rates for the zigzag (8, 0) carbon nanotube. We analyze the doping dependence of nanotubes on the doping rate and the nanotube type. Using these results, we select the zigzag (8, 0) carbon nanotube for toxic gas sensor calculation and obtain the total and partial densities of states for CNT…
Local Semiconducting Transition in Armchair Carbon Nanotubes: The Effect of Periodic Bi-site Perturbation on Electronic and Transport Properties of Carbon Nanotubes
We use numerical simulations to analyze recent experimental measurements of short-channel carbon nanotube field-effect transistors with palladium contacts. We show that the gate strongly modulates the contact properties, an effect that is distinct from that observed in Schottky barrier carbon nanotube transistors. This modulation of the contacts by the gate allows for the realization of superior subthreshold swings for short channels, and improved scaling behavior. These results further elucidate the behavior of carbon nanotube-metal contacts, and should be useful in the optimization of high-p…
The objective of the present paper is to investigate the mechanical properties of carbon nanotubes. We use classical molecular dynamics simulation in order to study the effect of external compression, bending and torsion to nanotubes. We find that in the low temperature limit, the nanotubes are resilient, sustaining extreme strain without signs of brittleness or plasticity. For high temperatures and under tension the nanotubes show brittle or plastic behavior.
We develop the Bardeen-Cooper-Schrieffer (BCS) formalism for the superconductivity of carbon nanotubes. It is found that the superconducting transition temperature Tc of single-wall carbon nanotubes decreases exponentially with the increase of the tube diameter because the density of states near the Fermi energy is inversely proportional to the tube diameter. For the multi-wall carbon nanotubes, the Cooper paring hopping between layers enhances the superconducting correlation and increases the superconducting transition temperature, which is consistent with the experimental observation.
Extensive molecular dynamics simulations of water permeation and ion selectivity of the single-walled carbon nanotubes with the radial deformation are presented . The simulated results indicate that there is a close relationship between the minor axis of deformed carbon nanotubes and the variety, density as well as the position of functional groups. The critical minor axis of different diameter carbon nanotubes exists, and the carbon nanotube whose minor axis is less than the critical minor axis owns the selectivity of chlorine and sodium ions. Meanwhile, compared with intrinsic carbon nanotub…
Photonic crystal nanocavities are used to enhance photoluminescence from single-walled carbon nanotubes. Micelle-encapsulated nanotubes are deposited on nanocavities within Si photonic crystal slabs and confocal microscopy is used to characterize the devices. Photoluminescence spectra and images reveal nanotube emission coupled to nanocavity modes. The cavity modes can be tuned throughout the emission wavelengths of carbon nanotubes, demonstrating the ability to enhance photoluminescence from a variety of chiralities.
Two paramount challenges in carbon nanotube research are achieving chirality-controlled synthesis and understanding chirality-dependent device physics. High-throughput and in-situ chirality and electronic structural characterization of individual carbon nanotubes is crucial for addressing these challenges. Optical imaging and spectroscopy has unparalleled throughput and specificity, but its realization for single nanotubes on substrates or in devices has long been an outstanding challenge. Here we demonstrate video-rate imaging and in-situ spectroscopy of individual carbon nanotubes on various…
We present a two-step procedure to probe hotspots of plasmon-enhanced Raman scattering with carbon nanotubes. Dielectrophoretic deposition places a small carbon nanotube bundle on top of plasmonic Au nanodimer. After 'pre-characterising' both the nanotubes and dimer structure, we subsequently use the tip of an AFM to push the bundle into the plasmonic hotspot located in the 25nm wide dimer gap, characterize its location inside the gap, and observe the onset of plasmon-enhanced Raman scattering. Evidence for the activation of the carbon nanotube's double-resonant D-mode by the near-field of the…
Deformations of single-wall carbon nanotubes are investigated within the tight-binding model with deformation-dependent hopping energies. We show that the nanotubes tend to twist and shrink spontaneously at zero temperature. The explicit values of the deformation parameters are computed for a wide range of nanotubes with varying diameter and chirality. The changes of the spectral gap associated with the spontaneous deformation are shown to depend on the chirality of the nanotubes.
The stabilization of carbon nanotubes via the filling with inner tubes is demonstrated by probing the optical transitions in double-walled carbon nanotube bundles under hydrostatic pressure with optical spectroscopy. Double-walled carbon nanotube films were prepared from fullerene peapods and characterized by HRTEM and optical spectroscopy. In comparison to single-walled carbon nanotubes, the pressure-induced redshifts of the optical transitions in the outer tubes are significantly smaller below $\sim$10 GPa, demonstrating the enhanced mechanical stability due to the inner tube already at low …
Photoluminescent carbon nanotubes are expected to become versatile room-temperature single-photon sources that have applications in quantum information processing. Quantum emission from carbon nanotubes is often induced by localization of excitons or exciton-exciton annihilation. Here, we modify the local energy landscape of excitons by decorating nanoscale pentacene particles onto air-suspended single-walled carbon nanotubes. Directional exciton diffusion from the undecorated region to the decorated site is demonstrated, suggesting exciton trapping induced by local dielectric screening from p…
We demonstrate theoretically that an off-resonant circularly polarized electromagnetic field can induce a persistent current in carbon nanotubes, which corresponds to electron rotation about the nanotube axis. As a consequence, the nanotubes acquire magnetic moment along the axis, which depends on their crystal structure and can be detected in state-of-the-art measurements. This effect and related phenomena are analyzed within the developed Floquet theory describing the electronic properties of the nanotubes irradiated by the field.
Single wall carbon nanotubes cooled to cryogenic temperatures are outstanding electronic as well as nano-electromechanical model systems. To probe a largely unperturbed system, we measure a suspended carbon-nanotube device where the nanotube is grown in the last fabrication step, thus avoiding damage and residues from subsequent processing. In this ultra-clean device, we observe the transport spectrum and its interaction with nano-electromechanics over a wide gate voltage range and thereby over a wide range of coupling parameters between the quantum dot and the contact electrodes.
Magnetic response of interacting electrons in a zigzag carbon nanotube threaded by a magnetic flux is investigated within a Hartree-Fock mean field approach. Following the description of energy spectra for both non-interacting and interacting cases we analyze the behavior of persistent current in individual branches of a nanotube. Our present investigation leads to a possibility of getting a filling-dependent metal-insulator transition in a zigzag carbon nanotube.
Zitterbewegung (ZB, trembling motion) of electrons in semiconductor carbon nanotubes is described taking into account dephasing processes. The density matrix formalism is used for the theory. Differences between decay of ZB oscillations due to electron localization and that due to dephasing are discussed.
The efficiencies of photonic devices are primarily governed by radiative quantum efficiency, which is a property given by the light emitting material. Quantitative characterization for carbon nanotubes, however, has been difficult despite being a prominent material for nanoscale photonics. Here we determine the radiative quantum efficiency of bright excitons in carbon nanotubes by modifying the exciton dynamics through cavity quantum electrodynamical effects. Silicon photonic crystal nanobeam cavities are used to induce the Purcell effect on individual carbon nanotubes. Spectral and temporal b…
Effects of impurity on the spin-dependent transport in a single wall carbon nanotube spin-valve, as ferromagnetic electrode/carbon nanotube/ferromagnetic electrode model junction is numerically investigated. Using a generalized Green's function method and the Landauer-Buttiker formalism, the impurity conditions are determined by randomly substitution of carbon atoms in the honeycomb carbon nanotube lattice by nitrogen and boron atoms. We have found that transport characteristics, including the spin-dependent current and tunnel magnetoresistance are strongly influenced by the impurity effects. …
We demonstrate an individual single-walled carbon nanotube light emitter integrated onto a microcavity and a waveguide operating in the telecom wavelength regime. Light emission from the carbon nanotube is enhanced at the cavity resonance and is efficiently extracted from the waveguide facet. We have transferred carbon nanotubes to a nanobeam cavity with a dry process, ensuring that an individual carbon nanotube is used. The guided light emission from a chirality-identified single carbon nanotube has a narrow linewidth of less than 1.3 nm and an off-resonance rejection of $\sim$17 dB. The wave…
We demonstrate a possibility for exciton Bose-Einstein condensation in individual small-diameter (~1-2 nm) semiconducting carbon nanotubes. The effect occurs under the exciton-interband-plasmon coupling controlled by an external electrostatic field applied perpendicular to the nanotube axis. It requires fields ~1 V/nm and temperatures below 100 K that are experimentally accessible. The effect offers a testing ground for fundamentals of condensed matter physics in one dimension and opens up perspectives to develop tunable coherent polarized light source with carbon nanotubes.
The measured electric resistance of carbon nanotubes wrapped with DNA molecules depends strongly on the spin of the injected electrons. Motivated by these experiments, we study the effect of helix-shaped potentials on the electronic spectrum of carbon nanotubes. We find that in combination with the curvature-induced spin-orbit coupling inherent to nanotubes, such a perturbation opens helicity-dependent gaps. Within these partial gaps, left-moving electrons carry a fixed spin-projection that is reversed for right-moving electrons, and the probability of electrons to transfer through the nanotub…
We investigate theoretically the feasibility of generation and amplification of terahertz radiation in aligned achiral carbon nanotubes (zigzag and armchair) in comparison with a superlattice in the presence of a constant (dc) and high-frequency (ac) electric fields. The electric current density expression is derived using the semiclassical Boltzmann transport equation with a constant relaxation time with the electric field applied along the nanotube axis. Our analysis on the current density versus electric field characteristics demonstrates negative differential conductivity at high frequency…
Phonon Dispersion in Chiral Single Wall Carbon Nanotubes
从$6\times 6$动力学矩阵出发，计算了手性单壁碳纳米管的声子色散。本文是G. D. Mahan和Gun Sang Jeon在扶手椅和锯齿形纳米管上的工作。[see P. R. B、{ \bf 70}，075405（2004）]。我们采用弹簧-质量模型，并采用\cite{M2}建议的适当声子势。我们可以计算任意手性的单壁碳纳米管在$Γ$点附近的色散。结果与Mahan et. al的扶手椅型和锯齿型单壁碳纳米管的结果。
