We present an investigation of different thin-film evaporated ferromagnetic materials for their suitability as electrodes in individual single-wall and multi-wall carbon nanotube-based spin devices. Various electrode shapes made from permalloy (Ni_{81}Fe_{19}), the diluted ferromagnet PdFe, and PdFe/Fe bilayers are studied for both their micromagnetic properties and their contact formation to carbon nanotubes. Suitable devices are tested in low-temperature electron transport measurements, displaying the typical tunneling magnetoresistance of carbon nanotube pseudo spin valves.
Effects of impurity on the spin-dependent transport in a single wall carbon nanotube spin-valve, as ferromagnetic electrode/carbon nanotube/ferromagnetic electrode model junction is numerically investigated. Using a generalized Green's function method and the Landauer-Buttiker formalism, the impurity conditions are determined by randomly substitution of carbon atoms in the honeycomb carbon nanotube lattice by nitrogen and boron atoms. We have found that transport characteristics, including the spin-dependent current and tunnel magnetoresistance are strongly influenced by the impurity effects. …
We report the experimental observation of spin-induced magnetoresistance in single-wall carbon nanotubes contacted with high-transparency ferromagnetic electrodes. In the linear regime the spin-induced magnetoresistance oscillates with gate voltage in quantitative agreement with calculations based on a Landauer-Buttiker model for independent electrons. Consistent with this interpretation, we find evidence for bias-induced oscillation in the spin-induced magnetoresistance signal on the scale of the level spacing in the nanotube. At higher bias, the spin-induced magnetoresistance disappears beca…
We report on spin dependent transport measurements in carbon nanotubes based multi-terminal circuits. We observe a gate-controlled spin signal in non-local voltages and an anomalous conductance spin signal, which reveal that both the spin and the orbital phase can be conserved along carbon nanotubes with multiple ferromagnetic contacts. This paves the way for spintronics devices exploiting both these quantum mechanical degrees of freedom on the same footing.
We present measurements of tunneling magneto-resistance (TMR) in single-wall carbon nanotubes attached to ferromagnetic contacts in the Coulomb blockade regime. Strong variations of the TMR with gate voltage over a range of four conductance resonances, including a peculiar double-dip signature, are observed. The data is compared to calculations in the "dressed second order" (DSO) framework. In this non-perturbative theory, conductance peak positions and linewidths are affected by charge fluctuations incorporating the properties of the carbon nanotube quantum dot and the ferromagnetic leads. Th…
We present a fabrication scheme called 'fork stamping' optimized for the dry transfer of individual pristine carbon nanotubes (CNTs) onto ferromagnetic contact electrodes fabricated by standard lithography. We demonstrate the detailed recipes for a residue-free device fabrication and in-situ current annealing on suspended CNT spin-valve devices with ferromagnetic Permalloy (Py) contacts and report preliminary transport characterization and magnetoresistance experiments at cryogenic temperatures. This scheme can directly be used to implement more complex device structures, including multiple ga…
We observed the coulomb blockade phenomena in ferromagnetic contacting single wall semiconducting carbon nanotube devices. No obvious Coulomb peaks shift was observed with existing only the Zeeman splitting at 4K. Combining with other effects, the ferromagnetic leads prevent the orbital spin states splitting with magnetic field up to 2 Tesla at 4K. With increasing magnetic field further, both positive or negative coulomb peaks shift slopes are observed associating with clockwise and anticlockwise orbital state splitting. The strongly suppressed/enhanced of the conductance has been observed ass…
We report on the giant magnetoresistance (GMR) of multiwall carbon nanotubes with ultra small diameters. In particular, we consider the effect of the inter-wall interactions and the lead/nanotube coupling. Comparative studies have been performed to show that in the case when all walls are well coupled to the electrodes, the so-called inverse GMR can appear. The tendency towards a negative GMR depends on the inter-wall interaction and on the nanotube le ngth. If, however, the inner nanotubes are out of contact with one of the electrodes, the GMR remains positive even for relatively strong inter…
We image the remnant magnetization configurations of CoFeB and permalloy nanotubes (NTs) using x-ray magnetic circular dichroism photo-emission electron microscopy. The images provide direct evidence for flux-closure configurations, including a global vortex state, in which magnetization points circumferentially around the NT axis. Furthermore, micromagnetic simulations predict and measurements confirm that vortex states can be programmed as the equilibrium remnant magnetization configurations by reducing the NT aspect ratio.
We study the effciency of the magnetoimpedance (MI) of thin-wall circumferentially ordered nanotubes in sub-GHz and GHz frequency regimes using micromagnetic simulations. We consider empty ferromagnetic tubes as well as tubes filled with non-magnetic conductors of circular cross-section (nanowire coverings) focusing on the low-field regime of MI (below the characteristic field of the low-frequency ferromagnetic resonance). In this field area, the effcient mechanism of MI is related to oscillations of the positions of (perpendicular to the tube axis) domain walls (DWs). Two mechanisms of drivin…
Possibility of a ferromagnetic semiconductor single wall carbon nanotube (SWCNT), where ferromagnetism is due to coupling between doped magnetic impurity on a zigzag SWCNT and electrons spin, is investigate. We found, in the weak impurity-spin couplings, at low impurity concentrations the spin up electrons density of states remain semiconductor while the spin down electrons density of states shows a metallic behavior. By increasing impurity concentrations the semiconducting gap of spin up electrons in the density of states is closed, hence a semiconductor to metallic phase transition is take p…
We report a study on the field-driven propagation of vortex-like domain walls in ferromagnetic nanotubes. This particular geometry gives rise to a special feature of the static wall configuration, which significantly influences its dynamics. Unlike domain walls in flat strips, the left-right symmetry of domain wall propagation is broken. Furthermore, the domain wall velocity is not limited by the Walker breakdown. Under sufficiently large magnetic fields, the domain wall velocity reaches the velocity of spin waves (about 1000 m/s) and is thereafter connected with a direct emission of spin wave…
Hysteretic switching in the magnetoresistance of short-channel, ferromagnetically contacted individual single wall carbon nanotubes is observed, providing strong evidence for nanotube spin transport. By varying the voltage on a capacitively coupled gate, the magnetoresistance can be reproducibly modified between +10% and -15%. The results are explained in terms of wave vector matching of the spin polarized electron states at the ferromagnetic / nanotube interfaces.
The reversal of a uniform axial magnetization in a ferromagnetic nanotube (FNT) has been predicted to nucleate and propagate through vortex domains forming at the ends. In dynamic cantilever magnetometry measurements of individual FNTs, we identify the entry of these vortices as a function of applied magnetic field and show that they mark the nucleation of magnetization reversal. We find that the entry field depends sensitively on the angle between the end surface of the FNT and the applied field. Micromagnetic simulations substantiate the experimental results and highlight the importance of t…
We use a scanning nanometer-scale superconducting quantum interference device to map the stray magnetic field produced by individual ferromagnetic nanotubes (FNTs) as a function of applied magnetic field. The images are taken as each FNT is led through magnetic reversal and are compared with micromagnetic simulations, which correspond to specific magnetization configurations. In magnetic fields applied perpendicular to the FNT long axis, their magnetization appears to reverse through vortex states, i.e.\ configurations with vortex end domains or -- in the case of a sufficiently short FNT -- wi…
We demonstrate a scalable new ferromagnetic resonance (FMR) technique based on the spin-orbit interaction. An alternating current drives FMR in uniform ferromagnetic structures patterned from the dilute magnetic semiconductors (Ga,Mn)As and (Ga,Mn)(As,P). This allows the direct measurement of magnetic anisotropy coefficients and damping parameters for individual nano-bars. By analysing the ferromagnetic resonance lineshape, we perform vector magnetometry on the current-induced driving field, observing contributions with symmetries of both the Dresselhaus and Rashba spin-orbit interactions.
We theoretically study the current-induced dynamics of a domain wall in a ferromagnetic nanotube by developing a theory for the orbital angular momentum of a domain wall and the current-induced torque on it. Specifically, a domain wall with nontrivial magnetization winding along the circumference is shown to possess finite orbital angular momentum, which is proportional to the product of its Skyrmion charge and position, and the current is shown to exert a torque changing the orbital angular momentum of the domain wall and thereby drives it. The current-induced torque is interpreted as the tra…
During the last years great attention has been given to the encapsulation of magnetic nanoparticles. In this work we investigated the stability of small magnetic particles inside magnetic nanotubes. Multisegmented nanotubes were tested in order to optimize the stability of the particle inside the nanotubes. Our results evidenced that multisegmented nanotubes are more efficient to entrap the particles at temperatures up to hundreds of kelvins.
One of the actual challenges of spintronics is the realization of a spin-transistor allowing to control spin transport through an electrostatic gate. In this review, we report on different experiments which demonstrate a gate control of spin transport in a carbon nanotube connected to ferromagnetic leads. We also discuss some theoretical approaches which can be used to analyze spin transport in these systems. We emphasize the roles of the gate-tunable quasi-bound states inside the nanotube and the coherent spin-dependent scattering at the interfaces between the nanotube and its ferromagnetic c…
We present theoretical study of shot noise in single wall metallic carbon nanotubes weakly coupled to either nonmagnetic or ferromagnetic leads. Using the real-time diagrammatic technique, we calculate the current, Fano factor and tunnel magnetoresistance in the sequential tunneling regime. It is shown that the differential conductance displays characteristic four-fold periodicity, indicating single-electron charging. Such a periodicity is also visible in tunnel magnetoresistance of the system as well as in the Fano factor. The present studies elucidate the impact of ferromagnetic (vs. nonmagn…
Controlling spin current and magnetic exchange coupling by applying an electric field and achieving high spin injection efficiency at the same time in a nanostructure coupled to ferromagnetic electrodes have been the outstanding challenges in nanoscale spintronics. A relentless quest is going on to find new low dimensional materials with tunable spin dependent properties to address these challenges. Herein, we predict, from first principles, the transverse electric field induced switching in the sign of exchange coupling and tunnel magnetoresistance in a boron nitride nanotube quantum dot atta…
A silicon micromechanical torsional oscillator is used to measure the hysteresis loops of two manganite La_0.67Ca_0.33MnO_3 nanotubes at different temperatures, applying an external field along its main axes. These structures are composed of nanograins with a ferromagnetic core surrounded by a dead layer. Micromagnetic calculations based on the stochastic Landau-Lifshitz-Gilbert equation, are performed to validate a simple model that allows for quantitatively describing the ferromagnetic behavior of the system. Further simulations are used to analyze the experimental data more in depth and to …
In this study, a model of a Schottky-barrier carbon nanotube field- effect transistor (CNT-FET), with ferromagnetic contacts, has been developed. The emphasis is put on analysis of current-voltage characteristics as well as shot (and thermal) noise. The method is based on the tight-binding model and the non- equilibrium Green's function technique. The calculations show that, at room temperature, the shot noise of the CNT FET is Poissonian in the sub-threshold region, whereas in elevated gate and drain/source voltage regions the Fano factor gets strongly reduced. Moreover, transport properties …
We report on electrical spin injection measurements on MWNTs . We use a ferromagnetic alloy Pd$_{1-x}$Ni$_{x}$ with x $\approx$ 0.7 which allows to obtain devices with resistances as low as 5.6 $kΩ$ at 300 $K$. The yield of device resistances below 100 $kΩ$, at 300 $K$, is around 50%. We measure at 2 $K$ a hysteretic magneto-resistance due to the magnetization reversal of the ferromagnetic leads. The relative difference between the resistance in the antiparallel (AP) orientation and the parallel (P) orientation is about 2%.
Recent conductance measurements on multi-wall carbon nanotubes (CNTs) reveal an effective behavior similar to disordered single-wall CNTs. This is due to the fact that electric current flows essentially through the outermost shell and is strongly influenced by inhomogeneous electrostatic potential coming from the inner tubes. Here, we present theoretical studies of spin-dependent transport through disorder-free double-wall CNTs as well as single-wall CNTs with Anderson-type disorder. The CNTs are end-contacted to ferromagnetic electrodes modelled as fcc (111) surfaces. Our results shed additio…
The mechanism of carbon nanotube (CNT) nucleation and growth has been a mystery for over 15 years. Prior models have attempted the extension of older classical transport mechanisms. In July 2000, a more detailed and accurate nonclassical, relativistic mechanism was formulated considering the detailed dynamics of the electronics of spin and orbital rehybridization between the carbon and catalyst via novel mesoscopic phenomena and quantum dynamics. Ferromagnetic carbon was demonstrated. Here, quantum (Hall) effects and relativistic effects of intense many body spin-orbital interactions for novel…
This contribution reports on comparative studies on giant magnetoresistance (GMR) in carbon nanotubes (CNTs) and graphene nanoribbons of similar aspect ratios (i.e perimeter/length and width/length ratios, for the former and the latter, respectively). The problem is solved at zero temperature in the ballistic transport regime, by means of the Green's functions technique within the tight-binding model and with the so-called wide band approximation for electrodes. The GMR effect in graphene is comparable to that of CNTs, it depends strongly on the chirality and only slightly on the aspect ratio.…
For spin-polarized junctions of ferromagnetically contacting multiple conductive paths, such as ferromagnet (FM)/atomic wires/FM and FM/carbon nanotubes/FM junctions, we theoretically investigate spin-dependent transport to elucidate the intrinsic relation between the number of paths and conduction, and to enhance the magnetoresistance (MR) ratio. When many paths are randomly located between the two FMs, electronic wave interference between the FMs appears, and then the MR ratio increases with increasing number of paths. Furthermore, at each number of paths, the MR ratio for carbon nanotubes b…
Electronic transport through a single-wall metallic carbon nanotube weakly coupled to one ferromagnetic and one nonmagnetic lead is analyzed in the sequential tunneling limit. It is shown that both the spin and charge currents flowing through such systems are highly asymmetric with respect to the bias reversal. As a consequence, nanotubes coupled to one nonmagnetic and one ferromagnetic lead can be effectively used as spin diodes whose functionality can be additionally controlled by a gate voltage.
We present low-temperature electron transport measurements on a single-wall carbon nanotube quantum dot exhibiting Kondo resonances at low temperature. Contrary to the usual behavior for the spin-1/2 Kondo effect we find that the temperature dependence of the zero bias conductance is nonmonotonic. In nonlinear transport measurements low-energy splittings of the Kondo resonances are observed at zero magnetic field. We suggest that these anomalies reflect interactions between the nanotube and a magnetic (catalyst) particle. The nanotube device may effectively act as a ferromagnetically contacted…
We consider magnetic properties of a long, thin-walled ferromagnetic nanotube. We assume that the tube consists of isotropic homogeneous magnet whose spins interact via the exchange energy, the dipole-dipole interaction energy, and also interact with an external field via Zeeman energy. Possible stable states are the parallel state with the magnetization along the axis of the tube, and the vortex state with the magnetization along azimuthal direction. For a given material, which of them has lower energy depends on the value γ=R^2d/(L λ_x^2), where R is the radius of the tube, d is its thicknes…
We study Rudermann-Kittel-Kasuya-Yosida (RKKY) interaction in carbon nanotubes (CNTs) and graphene nanoribbons in the presence of spin orbit interactions and magnetic fields. For this we evaluate the static spin susceptibility tensor in real space in various regimes at zero temperature. In metallic CNTs the RKKY interaction depends strongly on the sublattice and, at the Dirac point, is purely ferromagnetic (antiferromagnetic) for the localized spins on the same (different) sublattice, whereas in semiconducting CNTs the spin susceptibility depends only weakly on the sublattice and is dominantly…
Low-temperature measurements of asymmetric carbon nanotube (CNT) quantum dots are reported. The CNTs are end-contacted with one ferromagnetic and one normal-metal electrode. The measurements show a spin-dependent rectification of the current caused by the asymmetry of the device. This rectification occurs for gate voltages for which the normal-metal lead is resonant with a level of the quantum dot. At the gate voltages at which the current is at the maximum current, a significant decrease in the current shot noise is observed.
Electronic state modulation of the armchair (6,6) carbon nanotubes filled with a linear assembly of oxygen molecules is addressed theoretically. Ferromagnetic coupling of encapsulated oxygen produces a magnetic field with cylindrical symmetry, which deviates the electron's eigenenergies from those prior to the oxygen absorption. An intriguing spectral gap arises near the Fermi energy, at which the gap formation is allowed only when the tube length equals to a multiple of three in units of carbon hexagon. A possible means to detect the selective gap formation is discussed.
We find that ferromagnetism can be induced in carbon nanotubes (CNTs) by introducing hydrogen. Multiwalled CNTs grown inside porous alumina templates contain a large density of defects resulting in significant hydrogen uptake when annealed at high temperatures. This hydrogen incorporation produces H-complex and adatom magnetism which generates a sizeable ferromagnetic moment and a Curie temperature near Tc=1000 K. We studied the conditions for the incorporation of hydrogen, the temperature-dependent magnetic behavior, and the dependence of the ferromagnetism on the size of the nanotubes.
A multi-frequency electron spin resonance (ESR) study provides evidence for the occurrence of low temperature ferromagnetic/spin-glass behavior in aligned arrays of sub-nanometer single walled carbon nanotubes confined in zeolite nano-channels, owing to sp2-type non-bonding carbon associated localized states with density of ~3 x 1019 /g. Features related to the much anticipated conduction ESR are not detected. In the paramagnetic phase, the ESR linewidth is found to be weakly dependent on microwave frequency.
We study theoretically nonlocal spin transport in a ballistic carbon nanotube contacted to two ferromagnetic leads and two normal-metal leads. When the magnetizations of the two ferromagnets are changed from a parallel to an antiparallel configuration, the circuit shows a hysteretic behavior which is specific to the few-channel regime. In the coherent limit, the amplitude of the magnetic signals is strongly enhanced due to resonance effects occurring inside the nanotube. Our calculations pave the way for experiments on low-dimensional nonlocal spin transport, which should give results remarkab…
We consider a semiconducting carbon nanotube (CNT) laying on a ferromagnetic insulating sub-strate with one end depassing the substrate and suspended over a metallic gate. We assume that the polarised substrate induces an exchange interaction acting as a local magnetic field for the electrons in the non-suspended CNT side. Generalizing the approach of I. Snyman and Yu.V. Nazarov [Phys. Rev. Lett. 108, 076805 (2012)] we show that one can generate electrostatically a tun-able spin-polarized polaronic state localized at the bending end of the CNT. We argue that at low temperatures manipulation an…
For most chiralities, semiconducting nanotubes display topologically protected end states of multiple degeneracies. We demonstrate using density matrix renormalization group based quantum chemistry tools that the presence of Coulomb interactions induces the formation of robust end spins. These are the close analogues of ferromagnetic edge states emerging in graphene nanoribbons. The interaction between the two ends is sensitive to the length of the nanotube, its dielectric constant, as well as the size of the end spins: for $S=1/2$ end spins their interaction is antiferromagnetic, while for $S…
Using the real-time diagrammatic technique and taking into account both the sequential and cotunneling processes, we analyze the transport properties of single-wall metallic carbon nanotubes coupled to nonmagnetic and ferromagnetic leads in the full range of parameters. In particular, considering the two different shell filling schemes of the nanotubes, we discuss the behavior of the differential conductance, tunnel magnetoresistance and the shot noise. We show that in the Coulomb diamonds corresponding to even occupations, the shot noise becomes super-Poissonian due to bunching of fast tunnel…
We report an improved fabrication scheme for carbon based nanospintronic devices and demonstrate the necessity for a careful data analysis to investigate the fundamental physical mechanisms leading to magnetoresistance. The processing with a low-density polymer and an optimised recipe allows us to improve the electrical, magnetic and structural quality of ferromagnetic Permalloy contacts on lateral carbon nanotube (CNT) quantum dot spin valve devices, with comparable results for thermal and sputter deposition of the material. We show that spintronic nanostructures require an extended data anal…
We employ a self-consistent simulation approach based on quantum theory to investigate the physical properties of a pair of ferromagnetic and antiferromagnetic nanotubes. It was observed that under the given conditions, no matter the external magnetic field was absent or applied along the easy longitudinal axis, the spins always ordered in that direction due to the special geometric shape of the tubes and the magnetic uniaxial anisotropy, so that the two sorts of nanosystems exhibit typical ferromagnetic and antiferromagnetic properties, which may find applications in modern technology, in str…
We present an analytic study of domain-wall statics and dynamics in ferromagnetic nanotubes with spin-orbit-induced Dzyaloshinskii-Moriya interaction (DMI). Even at the level of statics, dramatic effects arise from the interplay of space curvature and DMI: the domains become chirally twisted leading to more compact domain walls. The dynamics of these chiral structures exhibits several interesting features. Under weak applied currents, they propagate without distortion. The dynamical response is further enriched by the application of an external magnetic field: the domain wall velocity becomes …
Spin polarized transport through a quantum dot coupled to ferromagnetic electrodes with noncollinear magnetizations is discussed in terms of nonequilibrium Green functions formalism in the finite-U slave boson mean field approximation. The difference of orientations of the magnetizations of electrodes opens off-diagonal spin-orbital transmission and apart from spin currents of longitudinal polarization also spin-flip currents appear. We also study equilibrium pure spin current at zero bias and discuss its dependence on magnetization orientation, spin-orbit coupling strength and gate voltage. I…
We show how lattice Quantum Monte Carlo simulations can be used to calculate electronic properties of carbon nanotubes in the presence of strong electron-electron correlations. We employ the path integral formalism and use methods developed within the lattice QCD community for our numerical work and compare our results to empirical data of the Anti-Ferromagnetic Mott Insulating gap in large diameter tubes.
We have studied the current through a carbon nanotube quantum dot with one ferromagnetic and one normal-metal lead. For the values of gate voltage at which the normal lead is resonant with the single available non-degenerate energy level on the dot, we observe a pronounced decrease in the current for one bias direction. We show that this rectification is spin-dependent, and that it stems from the interplay between the spin accumulation and the Coulomb blockade on the quantum dot. Our results imply that the current is spin-polarized for one direction of the bias, and that the degree of spin pol…
Carbon nanotubes (CNT) belong to the most promising new materials which can in the near future revolutionize the conventional electronics. When sandwiched between ferromagnetic electrodes, the CNT behaves like a spacer in conventional spin-valves, leading quite often to a considerable giant magneto-resistance effect (GMR). This paper is devoted to reviewing some topics related to electron correlations in CNT. The main attention however is directed to the following effects essential for electron transport through nanotubes: (i) nanotube/electrode coupling and (ii) inter-tube interactions.It is …
We report low-temperature magnetisation measurements on a large number of purified ropes of single wall carbon nanotubes. In spite of a large superparamagnetic contribution due to the small ferromagnetic catalytical particles still present in the sample, at low temperature ($T < 0.5K$) and low magnetic field ($H < 80 Oe$), a diamagnetic signal is detectable. This low temperature diamagnetism can be interpreted as the Meissner effect in ropes of carbon nanotubes which have previously been shown to exhibit superconductivity from transport measurements.
We performed studies of coherent electronic transport through a single walled carbon nanotube. In the calculations multiple scattering on the contacts and interference processes were taken into account. Conductance is a composition of contributions from different channels. We studied also spin--dependent transport in the system with ferromagnetic electrodes. The magnetoresistance is large and shows large oscillations, it can be even negative in some cases.
We propose a technique for sensitive magnetic point force detection using a suspended carbon nanotube (CNT) mechanical resonator combined with a magnetic field gradient generated by a ferromagnetic gate electrode. Numerical calculations of the mechanical resonance frequency show that single Bohr magneton changes in the magnetic state of an individual magnetic molecule grafted to the CNT can translate to detectable frequency shifts, on the order of a few kHz. The dependences of the resonator response to device parameters such as length, tension, CNT diameter, and gate voltage are explored and o…
Removal of impurities and aggregates from as-grown single walled-carbon nanotube (SWCNT) materials remains an important challenge in nanotube research and applications. We report a simple but effective purification method that uses permanent magnets to remove nanotube aggregates, as well as residual metallic catalyst, from surfactant-coated aqueous SWCNT suspensions. Samples have been characterized by optical absorption, fluorescence and Raman spectroscopies; AFM and near-IR fluorescence microscopies; and TGA. We found that magnetic purification gives samples with reduced absorption background…
By means of pseudopotential calculations based on density functional theory (DFT) we studied the effect of hydrogenation on electronic properties of armchair single-wall carbon nanotubes. The calculations demonstrate strong preference for formation of monoatomic H chains along the (5,5) nanotube axis with the H binding in an infinite H chain reaching the value of 2.58 eV per atom. Upon formation of chains of H adatoms, initially metallic (5,5) nanotubes change electronic structure to the semiconducting. The opening of the band gap of $\sim$0.6 eV is accompanied with antiferromagnetic coupling …
In ferromagnetic nanostructures, the ballistic anisotropic magnetoresistance (BAMR) is a change in the ballistic conductance with the direction of magnetization due to spin-orbit interaction. Very recently, a directional dependent ballistic conductance has been predicted to occur in a number of newly synthesized nonmagnetic semiconducting nanostructures subject to externally applied magnetic fields, without necessitating spin-orbit coupling. In this article, we review past works on the prediction of this BAMR effect in core-shell nanowires and rolled-up nanotubes. This is complemented by new r…
We study spin-dependent transport in a suspended carbon nanotube quantum dot in contact with two ferromagnetic leads and with the dot's spin coupled to the flexural mechanical modes. The spin-vibration interaction induces spin-flip processes between the two energy levels of the dot. This interaction arises from the spin-orbit coupling or a magnetic field gradient. The inelastic vibration-assisted spin flips give rise to a mechanical damping and, for an applied bias voltage, to a steady nonequilibrium occupation of the harmonic oscillator. We analyze these effects as function of the energy-leve…
We study the geometrical conditions for stabilizing magnetic skyrmions in cylindrical nanostrips and nanotubes of ferromagnetic materials with chiral interactions. We obtain the low-temperature equilibrium state of the system implementing a simulation annealing technique for a classical spin Hamiltonian with competing isotropic exchange and chiral interactions, radial anisotropy and an external field. We address the impact of surface curvature on the formation, the shape and the size of magnetic skyrmions. We demonstrate that the evolution of the skyrmion phase with the curvature is controlled…
We study the two-electron eigenspectrum of a carbon-nanotube double quantum dot with spin-orbit coupling. Exact calculation are combined with a simple model to provide an intuitive and accurate description of single-particle and interaction effects. For symmetric dots and weak magnetic fields, the two-electron ground state is antisymmetric in the spin-valley degree of freedom and is not a pure spin-singlet state. When double occupation of one dot is favored by increasing the detuning between the dots, the Coulomb interaction causes strong correlation effects realized by higher orbital-level mi…
Toroidal carbon nanotubes can serve as hosts for encapsulated loops of atomic metal wires. Such composite structures have been analyzed using density functional theory for a semiconducting C$_{120}$ torus encapsulating chains of Fe, Au and Cu atoms. The sheathed metal necklaces form a zigzag structure and drops the HOMO/LUMO bandgap to less than 0.1 eV. The iron composite is ferromagnetic with a magnetic moment essentially the same as that of bcc iron. The azimuthal symmetry of these toroidal composites suggests that they may offer novel elecromagnetic properties not associated with straight, …
We study the Kondo effect in a single-electron transistor device realized in a single-wall carbon nanotube. The K-K' double orbital degeneracy of a nanotube, which originates from the peculiar two-dimensional band structure of graphene, plays the role of a pseudo-spin. Screening of this pseudo-spin, together with the real spin, can result in an SU(4) Kondo effect at low temperatures. For such an exotic Kondo effect to arise, it is crucial that this orbital quantum number is conserved during tunneling. Experimentally, this conservation is not obvious and some mixing in the orbital channel may o…
